Just received a brand new Moto G4 from Amazon (not their promo version) and it's in a bootloop between the white logo screen and the android guy with text below saying "Erasing". :crying:
Anybody have any idea what's going on?
Did you try a factory reset?
titou4488 said:
Did you try a factory reset?
Click to expand...
Click to collapse
Yep, no help.
SOLVED plugging in the power took care of it
Related
Hello something happened to my Defy plus. Something I was looking on the internet in opera and phone freezes, so I left him and so after about 10 minutes, it started to reboot itself - as soon as they began to blew up some buzz that he and the process can not run and then reboot itself and the happened over and over until I turn it off. That was yesterday and today it has not let go, just keep loading the logo "M" and nothing happens, and stop it just by pulling the battery.
Of the systems I have nothing, there is the original android.
Can anyone advise me what to do?
thank you
Martin_4x4 said:
Hello something happened to my Defy plus. Something I was looking on the internet in opera and phone freezes, so I left him and so after about 10 minutes, it started to reboot itself - as soon as they began to blew up some buzz that he and the process can not run and then reboot itself and the happened over and over until I turn it off. That was yesterday and today it has not let go, just keep loading the logo "M" and nothing happens, and stop it just by pulling the battery.
Of the systems I have nothing, there is the original android.
Can anyone advise me what to do?
thank you
Click to expand...
Click to collapse
Is rooted? did you flashed any ROM?, if not try doing a factory reset, or at least option go to warranty!
LeonardoJegigzem said:
Is rooted? did you flashed any ROM?, if not try doing a factory reset, or at least option go to warranty!
Click to expand...
Click to collapse
thanks, helped me a hard reset
Martin_4x4 said:
thanks, helped me a hard reset
Click to expand...
Click to collapse
Press the Thank Button then!
Hello,
yesterday I tried to boot my tablet and after the logo "Lenovo" appeared on the screen, nothing happened (the screen was stuck on "Lenovo").
Tried to power off/on several times, same behaviour.
I charged it the whole night, and today when I tried to boot it, after the logo "Lenovo" appeared on the screen, the screen started flickering (random gray/green lines here and there)...
Any help?
Do you think it's a hardware or software problem?
Thanks
did you tried to do something ? any flashing/rooting attempt etc?
in any case you could try flashing a stock rom anew so at least you will know what is the problem... could be anything
(i have assumed you have an android tablet, maybe you could also post the model when asking)
ionioni said:
did you tried to do something ? any flashing/rooting attempt etc?
in any case you could try flashing a stock rom anew so at least you will know what is the problem... could be anything
(i have assumed you have an android tablet, maybe you could also post the model when asking)
Click to expand...
Click to collapse
I rooted it and flashed it a few months ago. Have been using it with multiuser feature (4 users).
Worked until yesterday.
See http://forum.xda-developers.com/showpost.php?p=59609862&postcount=172
Model:
Lenovo Yoga 10 B8000-F tablet
Android version: 4.4.2
[.::MDT::.] said:
I rooted it and flashed it a few months ago. Have been using it with multiuser feature (4 users).
Worked until yesterday.
See http://forum.xda-developers.com/showpost.php?p=59609862&postcount=172
Model:
Lenovo Yoga 10 B8000-F tablet
Android version: 4.4.2
Click to expand...
Click to collapse
so... try and flash back your stock rom
Or try to wipe data from recovery.....
StepoXX said:
Or try to wipe data from recovery.....
Click to expand...
Click to collapse
Thanks.
While booting (when the LENOVO logo appears) I kept pressing VOLUME UP button.
It entered recovery mode, where I deleted cache only (no factory reset).
After that it booted correctly.
I reckon the multiuser feature (I set up 4 users) could maybe use a lot of ram and the device gets stuck.
Not sure how to reproduce the problem, I'll maybe try a factory reset to check if the issue is still there.
So I was trying to flash android lollipop on my Lg D802 and when the Flash tool said it finally completed the flashing process. I unplugged it and my phone started booting but it got into a bootloop. I tried Factory reset but it did'nt work. I tried to go to download mode but it looked like this in the Image below. Please help me guys I need my phone back Also fastboot is also not working.
sammy696 said:
So I was trying to flash android lollipop on my Lg D802 and when the Flash tool said it finally completed the flashing process. I unplugged it and my phone started booting but it got into a bootloop. I tried Factory reset but it did'nt work. I tried to go to download mode but it looked like this in the Image below. Please help me guys I need my phone back Also fastboot is also not working.
Click to expand...
Click to collapse
Help Me out guys Please
i was there, the solution is to buy another phone ... try this solution
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
and I made a mistake and the screen went black without backlight. So lg g2 is brick forever: D
fedex_742 said:
i was there, the solution is to buy another phone ... try this solution
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
and I made a mistake and the screen went black without backlight. So lg g2 is brick forever: D
Click to expand...
Click to collapse
Isn't there any other way to fix it without hardware disassembly?
For the past few days i had been postponing a 40mb security update that came on my Moto G4 Plus. Finally today i decided to do it and it was downloaded as usual and the phone rebooted and it started installing the update. It was all going fine but as the progression bar filled all the way through the phone black screened and has not yet booted up. When connected to a computer the white notification LED light keeps blinking continuously. Please help.
Hyp3rVen0m said:
For the past few days i had been postponing a 40mb security update that came on my Moto G4 Plus. Finally today i decided to do it and it was downloaded as usual and the phone rebooted and it started installing the update. It was all going fine but as the progression bar filled all the way through the phone black screened and has not yet booted up. When connected to a computer the white notification LED light keeps blinking continuously. Please help.
Click to expand...
Click to collapse
Please give more details,.. Have a look at here https://forum.xda-developers.com/mo...-question-noob-friendly-t3526598/post73395955 and read ahead!
He bricked his phone and its also blinking. Did you do the same with your phone?
If your phone had been modified in any shape, then that's the result. You need to start by flashing a standard ROM in fastboot (or rdslite if fastboot mode is not working), maybe directly the last one:
https://forum.xda-developers.com/moto-g4-plus/how-to/install-official-firmware-soak-test-t3531296
Details
SoNic67 said:
If your phone had been modified in any shape, then that's the result. You need to start by flashing a standard ROM in fastboot (or rdslite if fastboot mode is not working), maybe directly the last one:
https://forum.xda-developers.com/moto-g4-plus/how-to/install-official-firmware-soak-test-t3531296
Click to expand...
Click to collapse
The phone was fully functioning before the small official update. The bootloader is unlocked. It's running the official Android N for Moto G4 Plus. There is no custom recovery installed.
Boot issue
strongst said:
Please give more details,.. Have a look at here https://forum.xda-developers.com/mo...-question-noob-friendly-t3526598/post73395955 and read ahead!
He bricked his phone and its also blinking. Did you do the same with your phone?
Click to expand...
Click to collapse
My issue is somewhat similar but whenever i connect the phone to a computer and hold the power button or any other combination for few seconds the computer recognizes the device for few seconds and then it disconnects due to unsuccessful boot.
Even a custom logo will trow a stick in the wheel.
Try to enter fast boot first. If that doesn't work, tray the RDSLite path.
SoNic67 said:
Even a custom logo will trow a stick in the wheel.
Try to enter fast boot first. If that doesn't work, tray the RDSLite path.
Click to expand...
Click to collapse
I visited the local service center for Lenevov/Motorolla and they have checked the phone and come to a conclusion that the motherboard indeed has malfunctioned hence the battery power and the software isn't working properly. I've been asked to replace the motherboard. Thanks for your help.
Hyp3rVen0m said:
I visited the local service center for Lenevov/Motorolla and they have checked the phone and come to a conclusion that the motherboard indeed has malfunctioned hence the battery power and the software isn't working properly. I've been asked to replace the motherboard. Thanks for your help.
Click to expand...
Click to collapse
It means that your battery is not functioning well. In case if it is not a hardware problem
Try the below step.
Plug in a charger of another phone with current output greater then 1. And then press volume down key and power key simultaneously. If the device woke up in fastboot mode then you are lucky. If this does not work leave the phone in charging for at least one and half hour. Then try the button combination again.
Battery working fine
ADITYA_KUMAR said:
It means that your battery is not functioning well. In case if it is not a hardware problem
Try the below step.
Plug in a charger of another phone with current output greater then 1. And then press volume down key and power key simultaneously. If the device woke up in fastboot mode then you are lucky. If this does not work leave the phone in charging for at least one and half hour. Then try the button combination again.
Click to expand...
Click to collapse
The guy said the battery and rest of the parts are functioning well and do not need replacement and i don't think using another charger is gonna do anything in this case. Thanks anyway.
i faced exactly same pbm today. ditto. i just gave it to service centre, hope ghost screen n boot both be fixed
Today same issue happen to my moto g4 plus as well after downloading security phone went for installation and never turned on after that.. anyone solved this issue or service center is the only option??
c.bedi said:
Today same issue happen to my moto g4 plus as well after downloading security phone went for installation and never turned on after that.. anyone solved this issue or service center is the only option??
Click to expand...
Click to collapse
Have you read the whole tread already? There are solutions provided. Or which issue you are meaning exactly?
c.bedi said:
Today same issue happen to my moto g4 plus as well after downloading security phone went for installation and never turned on after that.. anyone solved this issue or service center is the only option??
Click to expand...
Click to collapse
Did you downgrade or flash an older stock ROM at any point? Which update was this, and what stock firmware did you previously have on your device?
If you plug your device into your computer, is it still recognised or is it detected as a Qualcomm HS-USB 9008 or similar? If so, you may have hard bricked your device. Try this blankflash in the following link to repair your device bootloader and then flash the latest stock ROM (September 2017 patch) to fully repair your device. https://forum.xda-developers.com/moto-g4-plus/how-to/moto-g4-plus-hardbrick-solved-guide-t3657761 for the blank flash, https://forum.xda-developers.com/moto-g4-plus/how-to/stock-rom-npjs25-93-14-4-march-1-t3608138 for the September 2017 stock ROM.
c.bedi said:
Today same issue happen to my moto g4 plus as well after downloading security phone went for installation and never turned on after that.. anyone solved this issue or service center is the only option??
Click to expand...
Click to collapse
In my case the phone didn't turn on because the motherboard died for some unknown reason while the update. I did take it to authorized service center and he told me it was the motherboard and would require replacement.
Thanks for the reply guys.. Today my phone turned on automatically.. magic and then notification came unable to install update, no changes made...phone still showing new system software available..
Hey guys, so I was using my phone earlier today and i decided to restart it and then it went through the zte logo and then got stuck at the axon logo for a long time. my phone isn't rooted. after a while it goes to the lock screen and then instantly goes back to the axon logo. i've tried rebooting in safe mode and rebooting in bootloader but those dont work. right now after it goes on the axon logo for a minute it goes to a black screen.
oh yes, of note the phone can be connected to the computer and it reads it but i had it connected as a camera before and so its only connected as a camera.
i'm not sure what to do. thanks for the help guys!
You can try to reset the axon 7 to factory settings
Via the recovery
Have you installed any apps before this happened?
Or did you root the phone with Kingoroot?
Syberclone said:
Have you installed any apps before this happened?
Or did you root the phone with Kingoroot?
Click to expand...
Click to collapse
i dont think i have. i rooted the phone once and went into a reboot loop and had to reset everything. ever since then i haven't rooted the phone
Did you just factory reset or did you reinstall the ROM?
Syberclone said:
Did you just factory reset or did you reinstall the ROM?
Click to expand...
Click to collapse
i can't remember it was a year or so ago.... is there any way i can check?
Chris axon 7 said:
You can try to reset the axon 7 to factory settings
Via the recovery
Click to expand...
Click to collapse
i was wondering if i could save my files / data before that happens
zcad said:
i can't remember it was a year or so ago.... is there any way i can check?
Click to expand...
Click to collapse
I'm not sure with reset but if you have installed another ROM check the play store settings in device info.
You will see "device not certified" if you have a different rom.