Delete post!
this work on M571c from china telecom ????
zaii0007 said:
this work on M571c from china telecom ????
Click to expand...
Click to collapse
Yes can work but you need to flash A FLYME 1st then can flash CM
Mr0oHo0 said:
Yes can work but you need to flash A FLYME 1st then can flash CM
Click to expand...
Click to collapse
thanck you Brother for reply , any tuto to do this ?
zaii0007 said:
thanck you Brother for reply , any tuto to do this ?
Click to expand...
Click to collapse
Yes You Can But You Need To Follow This 1st Because if you just flash On A Or C FlyMe It Will Brick You Phone
1. Enable root or make sure you have root privileges
Enable root by tapping on Settings-> Accounts-> My Flyme-> Personal settings (first option) -> System privileges and set it to open - accept disclaimer and confirm. (In Flyme 5.x system privileges is underfingerprint and security*).
2. Download and copy the correct chid. sh file to your phone ( copy to root of your device).
https://drive.google.com/file/d/0B-1xFCo6OJzIUi1nNkU5WVpZaUU/view?pref=2&pli=1
3. (Download and) Launch an Android Shell Terminal Emulator and type the following commands
su
now wait until the $ sign changes in to # (it should change, if not you don’t have root (privileges).
sh /sdcard/chid.sh
x. This should backup your current/original phone ID, replace/change the ID, and Will AUTO reboot your phone After You Do This Finish.
Now you should be able to install I (global) firmware the regular way, which means via an update.zip and the original Meizu recovery. After applying OTA
Note: If the command does not work try sh /storage/emulated/0/chid.sh instead.
NOTED: YOU ONLY CAN FLASH THE SAME FRIMWARE mean If your phonr on FLYME OS 5.1.9.0C/A, PLS FLASH FLYME OS 5.1.9.0G, 1st THEN YOU CAN FLASH THE HIGHER FRIMWARE.
After that follow this phone, all done
Mr0oHo0 said:
Yes You Can But You Need To Follow This 1st Because if you just flash On A Or C FlyMe It Will Brick You Phone
1. Enable root or make sure you have root privileges
Enable root by tapping on Settings-> Accounts-> My Flyme-> Personal settings (first option) -> System privileges and set it to open - accept disclaimer and confirm. (In Flyme 5.x system privileges is underfingerprint and security*).
2. Download and copy the correct chid. sh file to your phone ( copy to root of your device).
https://drive.google.com/file/d/0B-1xFCo6OJzIUi1nNkU5WVpZaUU/view?pref=2&pli=1
3. (Download and) Launch an Android Shell Terminal Emulator and type the following commands
su
now wait until the $ sign changes in to # (it should change, if not you don’t have root (privileges).
sh /sdcard/chid.sh
x. This should backup your current/original phone ID, replace/change the ID, and Will AUTO reboot your phone After You Do This Finish.
Now you should be able to install I (global) firmware the regular way, which means via an update.zip and the original Meizu recovery. After applying OTA
Note: If the command does not work try sh /storage/emulated/0/chid.sh instead.
NOTED: YOU ONLY CAN FLASH THE SAME FRIMWARE mean If your phonr on FLYME OS 5.1.9.0C/A, PLS FLASH FLYME OS 5.1.9.0G, 1st THEN YOU CAN FLASH THE HIGHER FRIMWARE.
After that follow this phone, all done
Click to expand...
Click to collapse
thank you for your reply, I have followed this guide "https://forum.meizufans.eu/topic/2599/guide-how-to-install-i-international-firmware-on-your-chinese-mainland-meizu" , I think it is the same, but it did not work on m571c "china telecom" iam on Q version Flyme
zaii0007 said:
thank you for your reply, I have followed this guide "https://forum.meizufans.eu/topic/2599/guide-how-to-install-i-international-firmware-on-your-chinese-mainland-meizu" , I think it is the same, but it did not work on m571c "china telecom" iam on Q version Flyme
Click to expand...
Click to collapse
Q version more easy, just download A version firmware then flash over it that all.
I want to ask if the china telecom version(M571C) is ok or not to flash the cm rom of moyster. As I have noticed that the method of unlocking bootloader of that is not the same as the the M571U or other and there is no TWRP for it yet.
If yes, can you provide a tuto? thank you.
imyesbest1 said:
I want to ask if the china telecom version(M571C) is ok or not to flash the cm rom of moyster. As I have noticed that the method of unlocking bootloader of that is not the same as the the M571U or other and there is no TWRP for it yet.
If yes, can you provide a tuto? thank you.
Click to expand...
Click to collapse
Your phone box will saw you at you are M571C right? Belong to China but the phone firmware is Difference, you can flash From Q Flash To A Just download the A firmware UPDATE.ZIP Then Just Flash UPDATE Only, Because My Phone I Buy It At China Too, My Phone Version Is M571C
Mr0oHo0 said:
Your phone box will saw you at you are M571C right? Belong to China but the phone firmware is Difference, you can flash From Q Flash To A Just download the A firmware UPDATE.ZIP Then Just Flash UPDATE Only, Because My Phone I Buy It At China Too, My Phone Version Is M571C
Click to expand...
Click to collapse
Yes, it shows it is M571C. After flash the update of A version, what should I do then to flash cm?
imyesbest1 said:
Yes, it shows it is M571C. After flash the update of A version, what should I do then to flash cm?
Click to expand...
Click to collapse
After you flash A firmware you follow my this post everything will be fine.
Mr0oHo0 said:
Q version more easy, just download A version firmware then flash over it that all.
Click to expand...
Click to collapse
sorry but it does not work for me , iam on flymeos 5.1.5.0 Q i cant install flyme 51.5.0A ,
zaii0007 said:
sorry but it does not work for me , iam on flymeos 5.1.5.0 Q i cant install flyme 51.5.0A ,
Click to expand...
Click to collapse
Q To A You Need The A higher Firmware Then Flash It then okay
But if you want flash "I" firmware you can't higher then "I"
Mr0oHo0 said:
Q To A You Need The A higher Firmware Then Flash It then okay
But if you want flash "I" firmware you can't higher then "I"
Click to expand...
Click to collapse
i have the message "Firmware corrupt"
zaii0007 said:
i have the message "Firmware corrupt"
Click to expand...
Click to collapse
http://www.flyme.cn/firmwarelist-10.html#3 download this Version flyme 5.1.9.0A or flyme 5.1.8.0A
The flash see how, if I never guess wrong Q to A no need to do anything just download and flash
Don't work
zaii0007 said:
Don't work
Click to expand...
Click to collapse
Omgggg
Related
My Pro5 is G version. But not unlocked bootloader. Not installed update. Not installed kernel .
So do u have stock recovery. Do u 've tried to follow unlock BL tutorial in order to flash 5.6.1.19 A with unlockable BL ?
I tried to unlock_BL in the Forum
I Don't flash 5.6.1.19 A. Gives an error in the picture
You are still running an A firmware even if you have chenged the identifier from A to G.
1. You need to run and install legal G firmware and to use recovery from there.
Download it from here:
http://www.flymeos.com/firmwarelist?modelId=10&type=1
2. Install 5.6.1.19 G (with unlockable bootloader)
3. Unlock the bootloader
4. Install either stock with unlocked bootloader or recovery and afterwards CM 12.1 build.
http://postimg.org/image/gt3ptyrip/
This pic is legal G firmware (update.zip). I've tried in the same way 5.6.1.19. these methods can not be
Than please provide me:
1. Current Flyme version you are running.
2. Contents of your /dev/block/platform/15570000.ufs/by-name/proinfo
row: machine_type=
vlad48 said:
Than please provide me:
1. Current Flyme version you are running.
2. Contents of your /dev/block/platform/15570000.ufs/by-name/proinfo
row: machine_type=
Click to expand...
Click to collapse
O.K. now everything is clear:
You have a China Unicom Version of the phone on which some trained guy has placed G version of the Flyme via DD comand.
Next steps:
1.Root the device and make sure SU is active and you are able to change and save system files.
2. Open for editing your /dev/block/platform/15570000.ufs/by-name/proinfo
change the row value from:
machine_type=M576_mobile_public
to:
machine_type=M576_intl_official
(count the symbols and letter in this expression they should be always 13)
afterwards you'll be able to install 5.6.1.19 daily and unlock bootloader.
If something does not work properly or flash just crashes again you need to re-image your whole device again using this (5.1.3.0G) system.img switch on a rooted device #:
Code:
dd if=/storage/emulated/0/system.img of=/dev/block/platform/15570000.ufs/by-name/system
After that you can continue with step 1.
Now going for a shot of Yeni Raki fot your success and...
Again one big fat warning - be aware that you might brick your device, so if you are not sure what are you doing, please better don't do it!!!
vlad48 said:
O.K. now everything is clear:
You have a China Unicom Version of the phone on which some trained guy has placed G version of the Flyme via DD comand.
Next steps:
1.Root the device and make sure SU is active and you are able to change and save system files.
2. Open for editing your /dev/block/platform/15570000.ufs/by-name/proinfo
change the row value from:
machine_type=M576_mobile_public
to:
machine_type=M576_intl_official
(count the symbols and letter in this expression they should be always 13)
afterwards you'll be able to install 5.6.1.19 daily and unlock bootloader.
If something does not work properly or flash just crashes again you need to re-image your whole device again using this (5.1.3.0G) system.img switch on a rooted device #:
Code:
dd if=/storage/emulated/0/system.img of=/dev/block/platform/15570000.ufs/by-name/system
After that you can continue with step 1.
Now going for a shot of Yeni Raki fot your success and...
Again one big fat warning - be aware that you might brick your device, so if you are not sure what are you doing, please better don't do it!!!
Click to expand...
Click to collapse
Yes machine_type=M576_intl_official
I'm complete
Oh noo After restarting my phone machine type =M576_mobile_public
byserkaan said:
Click to expand...
Click to collapse
Yep, it's not international but chinese phone with a G rom
PYCON said:
Yep, it's not international but chinese phone with a G rom
Click to expand...
Click to collapse
What should I do
we can unlock it easy
---------- Post added at 11:22 PM ---------- Previous post was at 11:07 PM ----------
byserkaan said:
What should I do
Click to expand...
Click to collapse
you must root your device first,and when edit /dev/block/platform/15570000.ufs/by-name/proinfo, you must use com.jrummy.root.browserfree.apk
I've tried faild yesterday by others
I can't post outside links,you can find it by google
Sure, first thing is ROOT !!!
I solved my problem. I have updated other versions of BusyBox. I changed the region ID. I installed the stock ROM. install Ultimate Pro 5 (Kernel).
thank you so much..
byserkaan said:
I solved my problem. I have updated other versions of BusyBox. I changed the region ID. I installed the stock ROM. install Ultimate Pro 5 (Kernel).
thank you so much..
Click to expand...
Click to collapse
Nice ! :highfive:
byserkaan said:
I solved my problem. I have updated other versions of BusyBox. I changed the region ID. I installed the stock ROM. install Ultimate Pro 5 (Kernel).
thank you so much..
Click to expand...
Click to collapse
For info (in French) :
Flyme OS 5.1.3.0 (global) ATTENTION : dès téléchargement de cette version, le compte Flyme ne pourra plus être utilisé. Meizu travaille sur une version de compte Flyme pour l’international, qui sera disponible en Mai 2016.
Are you sure you have installed latest Ultimate Kernel ?
old v5 (09-03-16) : http://forum.xda-developers.com/meizu-pro-5/development/ultimate-pro-5-kernel-t3310311
new (latest) v15.1 (21-04-16) : https://drive.google.com/folderview?id=0B7NYMa4FPbKpOHVUZlNQUjVWNVU&usp=sharing
I uploaded the latest file from github. I will create a thread for the updated Ultimate Kernel for PRO 5.
Hit thanks if I helped you.
Please , my honor is in PLK_L01C185 ..CAN I convert it,s model to Chinese ROM PLK_TL00C01 ???
yes, you can by rebranding your device.
venugopalu007 said:
yes, you can by rebranding your device.
Click to expand...
Click to collapse
i tried it by multi tool of huawei but it fail ...
can y tell me how excactly ,
sorry for bad english
TAREK XDA said:
i tried it by multi tool of huawei but it fail ...
can y tell me how excactly ,
sorry for bad english
Click to expand...
Click to collapse
any screen shots ? of error
It send me this error ,
Something went error ..
I active root permissions in adb mode, my bootloader is unlocked , usb debbug is active but still error
TAREK XDA said:
It send me this error ,
Something went error ..
I active root permissions in adb mode, my bootloader is unlocked , usb debbug is active but still error
Click to expand...
Click to collapse
Check your current state of vendor/country with
Dial *#*#2846579#*#* goto network information then vendor country info
Try it now and send me that .,,
Try it now and it send me ,, vendor country file donot exist ...
Like screenshot below ..
no, you have flash the zip provided by twrp and have to dload the official firmware of rebreanded version
My stock firmware of my honor is PLK _ L01C185 and i wish rebranded it to chinease firmware PLK_TL00C01 , DO you mean i have first flash stock rom plk_l01c185 to solve problem of vendor country and then flash twrp and root then rebrand it to chinease firmware by multi tool or what you mean exactly ??..
I wish you send me step by step to rebrand it ..
I wish goin your facebook account to speak to you easly
TAREK XDA said:
I wish goin your facebook account to speak to you easly
Click to expand...
Click to collapse
I think you have lost the oeminfo, you should check for backup of it ,in multitool _ backup folder if it's there try to restore it. It should not have happened may be oeminfo file for PKL-TLOO which you trying to flash is problem(it is downloaded by multitool ) post the problem in multitool thread @insideout he can get it to
TAREK XDA said:
My stock firmware of my honor is PLK _ L01C185 and i wish rebranded it to chinease firmware PLK_TL00C01 , DO you mean i have first flash stock rom plk_l01c185 to solve problem of vendor country and then flash twrp and root then rebrand it to chinease firmware by multi tool or what you mean exactly ??..
I wish you send me step by step to rebrand it ..
Click to expand...
Click to collapse
download rebrand zip provided my Huaweimultitool and flash using twrp and dload the firmware which is related to rebrand zip version
Where i find this rebrand zip , can u help me more or send me a link to download it ..
Very thanks for you
TAREK XDA said:
Where i find this rebrand zip , can u help me more or send me a link to download it ..
Very thanks for you
Click to expand...
Click to collapse
First download full stock firmware for TL-00C01 whichever version but must be full firmware not ota (should be of size 1.5gb) 2. extract the update.app file from it 3. Paste the file in mutitool/UZC folder. Follow the steps mentioned in post 519 page no 52 of mutitool thread link
https://forum.xda-developers.com/honor-7/general/honor-7-multi-tool-t3281176/page52
Multitool will create a zip file will take 10-15min
Dear
Thanx alot , but i ask ...i am on android 5 x emui 3,1 if i wish to debrand it also have to great flashable debrand zip or thas in android 6,x only
TAREK XDA said:
Thanx alot , but i ask ...i am on android 5 x emui 3,1 if i wish to debrand it also have to great flashable debrand zip or thas in android 6,x only
Click to expand...
Click to collapse
IF u r on Android 5x then download the target firmware of 5x extract and put update file in uzc folder follow the instructions to create twrp-flashable zip file on multitool then flash it via twrp then u will be on Android 5x of TL001c after that u can upgrade to 6.0 if u want
EMUI 8.0 Oreo Download Links for the NOVA 2 Plus-
Download according your build Number
Download-
BAC-L03C212B140 [OTA] http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1596/g79/v101025/f1/full/update.zip
BAC-L21C185B150 [OTA] http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1596/g79/v100570/f1/full/update.zip
BAC-L22C636B140 [OTA] http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1596/g79/v100536/f1/full/update.zip
BAC-L23C469B140 [OTA] http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1596/g79/v98566/f1/full/update.zip
BAC-AL00C00B173 [FULL] http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1714/g88/v98115/f1/full/update.zip
Flashing Guide - https://romprovider.com/2017/11/update-emui-8-0-huawei-nova-2-plus/
can i install full firmware on every build number??
Hi my device is BAC-L21C185B150 .. can i install BAC AL00CB173 on my device beacuse its full rom. Also please tell how to install without root and with stock recovery.. sorry for my bad english.?? Alsohow to install updates..???
.
hallo für Huawei nova 2
PIC-LX9???
How to flash this rom?
rameezyp007 said:
Hi my device is BAC-L21C185B150 .. can i install BAC AL00CB173 on my device beacuse its full rom. Also please tell how to install without root and with stock recovery.. sorry for my bad english. Alsohow to install updates..??
.
Click to expand...
Click to collapse
Hi, its not posible and it can be harmful to install a different version, for installing without root you can do it with the FIrmware Finder for Huawei through your version and using a web proxy
---------- Post added at 06:55 PM ---------- Previous post was at 06:49 PM ----------
turkishboy07 said:
How to flash this rom?
Click to expand...
Click to collapse
There are 3 methods:
1.- Through Root with TWRP (you need Unlocked bootloader)
2.- Using HiSuite (you will need Huawei Updater Tool 2.0)
3.- Using your phones OTA update with Firmware Finder for Huawei (a playstore app)
mark332 said:
EMUI 8.0 Oreo Download Links for the NOVA 2 Plus-
Download according your build Number
Download-
BAC-L03C212B140 [OTA]
BAC-L21C185B150 [OTA]
BAC-L22C636B140 [OTA]
BAC-L23C469B140 [OTA]
BAC-AL00C00B173 [FULL]
Flashing Guide -
Click to expand...
Click to collapse
Hi mark332, im following the update guide u gave us but for some reason, even it detects the version BAC-L03C212B140CUSTC212D001 with its 628 Mbs (my phone is a BAC-L03) after update it stays the same it appears only gives patches but doesnt update to Android 8, is there anything i might not be doing?
Is it possible to use these update files for updating the Huawei Nova 2 (PIC-LX9)?
well full version for BAC-L21C185B150 is not included ..... i have the same build and this update in not oreo !
can you proof oreo from it with screenshot ?
@ahrion this is a guide to brick phone
reported!
How can I install this? Can I flash with 3button method?
Already received that one via official OTA in my Nova 2 Plus, but it still being Nougat. Are the links correct?
zeth385 said:
Already received that one via official OTA in my Nova 2 Plus, but it still being Nougat. Are the links correct?
Click to expand...
Click to collapse
Do you man February security patch ??
My device is BAC-L21 and the build number is BAC-L21C185B102.
Can I use the BAC-L21C185B150 update?
3et545 said:
My device is BAC-L21 and the build number is BAC-L21C185B102.
Can I use the BAC-L21C185B150 update?
Click to expand...
Click to collapse
Its not oreo update...its still android 7
crazylife said:
Its not oreo update...its still android 7
Click to expand...
Click to collapse
I do not understand. Does the build number matter? Or only the device model number (BAC-L21)?
3et545 said:
I do not understand. Does the build number matter? Or only the device model number (BAC-L21)?
Click to expand...
Click to collapse
Sure it do matter.
Only the last 3 numbers is the software number
New update guys
crazylife said:
Sure it do matter.
Only the last 3 numbers is the software number
Click to expand...
Click to collapse
I see, thanks.
Any chance you can provide a step-by-step guide for the third method? I don't want to unlock my bootloader and the second method didn't work for me. As for the third method I did try the mention app, but all it did was download the update file on the device and that's it. It doesn't install the update and the phone doesn't detect it either. I tried from the recovery through internal memory and an SD card but still it didn't detect it.
I would appreciate the help.
3et545 said:
I see, thanks.
Any chance you can provide a step-by-step guide for the third method? I don't want to unlock my bootloader and the second method didn't work for me. As for the third method I did try the mention app, but all it did was download the update file on the device and that's it. It doesn't install the update and the phone doesn't detect it either. I tried from the recovery through internal memory and an SD card but still it didn't detect it.
I would appreciate the help.
Click to expand...
Click to collapse
What software installed in ur device?
crazylife said:
What software installed in ur device?
Click to expand...
Click to collapse
Android 7.0
BAC-L21C185B102
Global Rom is officialy out!
it turns out 9.6.4.0.OEDMIFD is a real global rom with a broken modem.
just update to newer releases that might fix the issue.
You cant just flash the global rom over an Antirollback rom as the global rom doesnt have Antirollback. (it will brick your device)
Guide to installing global rom on antirollback devices & installing global rom with fixed modem (for calls and internet) over china rom (no ARB): here
Download Links for Official Global Rom: here
Antirollback information: here
Thanks and have a great day!
omer919 said:
Hello there people!
our lovely new Mi Max 3 is now available for purchase on many websites.
These websites sell you a "MULTILANGUAGE rom" or "Global Rom".
The version that they sell is 9.6.4.0.OEDMIFD
Unfortunately this rom is FAKE / Un-Official and is dangerous for your device!
Why? because to install this shady rom they need to unlock your bootloader unofficialy and install a rom which was not originaly designed for Mi Max 3! this rom bricks some partitions of your device and may cause a lot of issues later! Some say that this rom may cause damage to the ability to flash roms and more onto your device or to move to official rom / xiaomi.eu rom
THERE ISNT ANY OFFICIAL GLOBAL ROM AVAILABLE FOR MI MAX 3 YET!
I suggest not to buy the Mi Max 3 with a "MULTILANGUAGE rom" or "Global Rom". (Please notice that some people that have asked not to install the fake rom got their devices with the fake rom even though they asked!)
Be patient and wait for official global rom from en.miui.com
Have a great day!
Click to expand...
Click to collapse
I have this rom .any solution
sintboy2020 said:
I have this rom .any solution
Click to expand...
Click to collapse
I suggest flashing the latest china beta rom using fastboot mode
MAKE SURE THAT YOUR BOOTLOADER IS UNLOCKED
download: here
after that flash xiaomi.eu rom
tutorial: here
Why do you need to flash both the china beta rom and the xiaomi.eu rom?
The flashing of xiaomi.eu does not delete everything previously installed anyway?
omer919 said:
I suggest flashing the latest china beta rom using fastboot mode
MAKE SURE THAT YOUR BOOTLOADER IS UNLOCKED
download: here
after that flash xiaomi.eu rom
tutorial: here
Click to expand...
Click to collapse
itay457 said:
Why do you need to flash both the china beta rom and the xiaomi.eu rom?
The flashing of xiaomi.eu does not delete everything previously installed anyway?
Click to expand...
Click to collapse
Fastboot china rom will wipe all partitions and reinstall them.
Xiaomi.eu recovery rom only changes the SYSTEM partition, remember you are coming from a fake rom so you might not want to have broken partitions from the flashing of the fake rom.
My Max 3 comes with this so-called "Global" ROM.
I checked my bootloader and it says Unlocked. So yesterday I downloaded CN ROM and flashed it via fastboot.
Ok, I understand. "fastboot china rom" means it should only be installed through fastboot? or its also possible through custom recovery?
omer919 said:
Fastboot china rom will wipe all partitions and reinstall them.
Xiaomi.eu recovery rom only changes the SYSTEM partition, remember you are coming from a fake rom so you might not want to have broken partitions from the flashing of the fake rom.
Click to expand...
Click to collapse
itay457 said:
Ok, I understand. "fastboot china rom" means it should only be installed through fastboot? or its also possible through custom recovery?
Click to expand...
Click to collapse
MAKE SURE THAT YOUR BOOTLOADER IS UNLOCKED BEFORE DOING THIS OR YOU WILL BRICK YOUR DEVICE
Fastboot roms are flashed through a special tool by xiaomi which can be found: here
You also might need adb drivers which are found: here
1. Open the drivers file and click "y" for every option that it asks for.
1. Install the fastboot tool tool
2. Download the fastboot rom that you wanna flash
3. Unzip the rom to a folder on your pc
4. Open the tool and in bottom right corner there will be 3 options, select "clean all"
5. Click on the "select" button on top left corner and head to the folder that you unziped, select it.
6. On your device enable "USB debugging", "install via USB", "USB Debugging (security settings)", and disable "verify apps over USB" (Developers options are enabled by going to "about phone" then spam clicking the "MIUI version" until it says that your are a developer. then go to "additional setting" and you will find "developer options")
7. Boot your device to fastboot mode by holding down the vol- + power key together until you see a bunny with fastboot sign.
8. Connect your device to your PC and click the "refresh" button on top right corner. (your phone should now appear in the list)
9. Click "flash" and wait until your device boots to the MI logo and 3 dots. (DONT DISCONNECT YOUR DEVICE BEFORE THAT!!!)
10. Wait for your device to boot up
11. Enjoy!
Hi, So if I buy with China ROM (Outside China - I live in Thailand) I can download and change to Global ROM once it's released?
China ROM will still get updates, though right?
Sorry for numpty question!
This is the ROM on my girlfriends Mi Max 3.
Thanks for the info but it would also be good if you posted up how to check if the bootloader is unlocked seeing how important it is before doing any steps.
Also you state that for the people to put on the fake ROM they had to unlock the bootloader in the first place so would they then relock the bootloader? Won't all phones with fake ROMs have unlocked bootloaders?
Wam7 said:
This is the ROM on my girlfriends Mi Max 3.
Thanks for the info but it would also be good if you posted up how to check if the bootloader is unlocked seeing how important it is before doing any steps.
Also you state that for the people to put on the fake ROM they had to unlock the bootloader in the first place so would they then relock the bootloader? Won't all phones with fake ROMs have unlocked bootloaders?
Click to expand...
Click to collapse
Check if you can install twrp, if you can its unlocked.
You may never know...
This procedure work on 128 Gb mi max 3 ?
Thank you
I ordered a one from Eternal Team on Ali before I seen this and asked them about the fake rom and the bootloader after it was sent this is the reply .....
Dear friend:
Welcome to our store . /:000
Sorry for the late reply .
It's locked . But you could use the Google play and use all the function normally . If you need use the Mi service . You need unlock it by yourself .
Please check this link:http://en.miui.com/unlock/
Best regards,
Cassie-- ET
(Working time: GMT+8, 9:00 am-6:30 pm, Mon-Fri)
So looks like the bootloader is locked and this fake rom is installed.
Great
omer919 said:
Check if you can install twrp, if you can its unlocked.
You may never know...
Click to expand...
Click to collapse
Thanks for the advice and I really appreciate your help but could you give some clearer step by step instructions as many people are not coming from a Xiaomi world. I come from Note4 and for me to install TWRP I do this using Odin but;
1) In simple step by step guide, how do you install TWRP on the Mi Max 3?
2). How do you unlock the bootloader - I go to https://en.miui.com/unlock/ and it starts in English then the next page is in Mandarin so not good to me.
These and other basics instructions are needed to be clearly detailed in a thread as there will be many people following me with the same questions/issues.
lucaxxaa said:
This procedure work on 128 Gb mi max 3 ?
Thank you
Click to expand...
Click to collapse
Also looking for an answer to this, does anyone know?
lucaxxaa said:
This procedure work on 128 Gb mi max 3 ?
Thank you
Click to expand...
Click to collapse
Tharg0r said:
Also looking for an answer to this, does anyone know?
Click to expand...
Click to collapse
Yes
Wam7 said:
Thanks for the advice and I really appreciate your help but could you give some clearer step by step instructions as many people are not coming from a Xiaomi world. I come from Note4 and for me to install TWRP I do this using Odin but;
1) In simple step by step guide, how do you install TWRP on the Mi Max 3?
2). How do you unlock the bootloader - I go to https://en.miui.com/unlock/ and it starts in English then the next page is in Mandarin so not good to me.
These and other basics instructions are needed to be clearly detailed in a thread as there will be many people following me with the same questions/issues.
Click to expand...
Click to collapse
1. yes go: here
2. You need to create a mi account on global forums and then use them to apply, assign the account to your phone in developer settings and unlock your phone after you got perms. search for a vid on how to unlock the bootloader on xiaomi devices on YT for a better guide.
Thanks for the info.
omer919 said:
1. yes go: here
2. You need to create a mi account on global forums and then use them to apply, assign the account to your phone in developer settings and unlock your phone after you got perms. search for a vid on how to unlock the bootloader on xiaomi devices on YT for a better guide.
Click to expand...
Click to collapse
Excellent, thanks that is much clearer.
I checked this video on youtube for checking 'locked bootloader' and also how to unlock.
https://www.youtube.com/watch?v=zL2omn9PGc4
I did not need to unlock becasue as I rightly guessed the bootloader is still unlocked. (pic attached). This is on both the Mi Max 3's that I have.
So I'll just start the process of flashing the Chinese ROM (to make sure of partition integrity) via Fastboot and then installing TWRP, and then flash the Xiaomi.eu ROM.
OK omer919, thanks to you I have flashed the Chinese MUI10 Fastboot ROM.
Unfortunately the link to the TWRP instructions is not good at the moment as the TWRP link in that thread is not working and the thread is now closed.
Do you (or anyone else) have a working link to TWRP for Mi Max 3 so I can install the Xiaomi.eu ROM?
Hello guys,
I get an Xiaomi RN7 and i'm waiting to unlock my bootloader (72h left), so i have time to ask some questions.
1/ How to keep MIUI with TWRP (and Magisk) ?
2/ There is a MIUI Global Rom i can install with TWRP ?
Sorry if my english isn't perfect, that's not my native language.
---
My experience before ;
i had install TWRP on my old phone (xiaomi RN4 - mido),
I root him with Magisk,
But in these step i lost my official ROM, and i rly want to keep MIUI on my Xiaomi Redmi Note 7, that's why i ask u there 2 questions
You can flash xiaomi.eu from twrp. Newer MIUI, no bloat/ads, more features.
xiaomi.eu ? Do you have a link pls ? i didnt found it on google
and thank's a lot for helping me !
Here you go: https://xiaomi.eu/community/
You have "developer" and "stable" releases.
Just to be sure, on that link :
https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-10-3-stable-release.47170/
then
DOWNLOAD MIUIv10.3 STABLE
https://www.androidfilehost.com/?w=files&flid=292396
depend on my phone, so the HMNote7
"xiaomi.eu_multi_HMNote7_V10.3.2.0.PFGCNXM_v10-9.zip" right?
--
Did the OTA update is working ?
can someone can confirm me that please ?
Pactil said:
can someone can confirm me that please ?
Click to expand...
Click to collapse
confirmed. im on that specific eu rom right now.
Thank's all for helping me !
I have one more problem..
My bootloader is now unlocked and i want install TWRP, i have adb on my pc.
I download https://forum.xda-developers.com/redmi-note-7/development/recovery-twrp-3-3-0-t3923835
I put the the file in my ADB folder, open command and i do the "fastboot flash recovery twrp_lavender.img"
installation is ok on my command
BUT when i reboot my phone in recovery mode, that not TWRP but the official recovery ...
Can u tell me what i'm doing wrong pls ?
Pactil said:
I have one more problem..
My bootloader is now unlocked and i want install TWRP, i have adb on my pc.
I download https://forum.xda-developers.com/redmi-note-7/development/recovery-twrp-3-3-0-t3923835
I put the the file in my ADB folder, open command and i do the "fastboot flash recovery twrp_lavender.img"
installation is ok on my command
BUT when i reboot my phone in recovery mode, that not TWRP but the official recovery ...
Can u tell me what i'm doing wrong pls ?
Click to expand...
Click to collapse
Follow these exact steps: after flashing recovery plug off your usb cable while still in fastboot, then long press Power + Vol-Up until you see the Redmi logo.
Pactil said:
Just to be sure, on that link :
https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-10-3-stable-release.47170/
then
DOWNLOAD MIUIv10.3 STABLE
https://www.androidfilehost.com/?w=files&flid=292396
depend on my phone, so the HMNote7
"xiaomi.eu_multi_HMNote7_V10.3.2.0.PFGCNXM_v10-9.zip" right?
--
Did the OTA update is working ?
Click to expand...
Click to collapse
This Eu rom, can be flash on any version, from global, European to India?
I mean on PFGMIXM, PFGEUXM, PFHINXM?
This doesn't matter,can go on every single one? I have PFGMIXM
thunderteaser said:
Follow these exact steps: after flashing recovery plug off your usb cable while still in fastboot, then long press Power + Vol-Up until you see the Redmi logo.
Click to expand...
Click to collapse
Damn thx dude ! that's worked !
tze_vitamin said:
This Eu rom, can be flash on any version, from global, European to India?
I mean on PFGMIXM, PFGEUXM, PFHINXM?
This doesn't matter,can go on every single one? I have PFGMIXM
Click to expand...
Click to collapse
I'm living in france and i get a Global ROM
Pactil said:
I'm living in france and i get a Global ROM
Click to expand...
Click to collapse
I live in Serbia and also get like you PFGMIXM.. global.