Database Users

Meizu M2 Note Easy Way To Root & Flash TWRP Recovery

Delete post!

this work on M571c from china telecom ????

zaii0007 said:
this work on M571c from china telecom ????
Click to expand...
Click to collapse
Yes can work but you need to flash A FLYME 1st then can flash CM

Mr0oHo0 said:
Yes can work but you need to flash A FLYME 1st then can flash CM
Click to expand...
Click to collapse
thanck you Brother for reply , any tuto to do this ?

zaii0007 said:
thanck you Brother for reply , any tuto to do this ?
Click to expand...
Click to collapse
Yes You Can But You Need To Follow This 1st Because if you just flash On A Or C FlyMe It Will Brick You Phone
1. Enable root or make sure you have root privileges
Enable root by tapping on Settings-> Accounts-> My Flyme-> Personal settings (first option) -> System privileges and set it to open - accept disclaimer and confirm. (In Flyme 5.x system privileges is underfingerprint and security*).
2. Download and copy the correct chid. sh file to your phone ( copy to root of your device).
https://drive.google.com/file/d/0B-1xFCo6OJzIUi1nNkU5WVpZaUU/view?pref=2&pli=1
3. (Download and) Launch an Android Shell Terminal Emulator and type the following commands
su
now wait until the $ sign changes in to # (it should change, if not you don’t have root (privileges).
sh /sdcard/chid.sh
x. This should backup your current/original phone ID, replace/change the ID, and Will AUTO reboot your phone After You Do This Finish.
Now you should be able to install I (global) firmware the regular way, which means via an update.zip and the original Meizu recovery. After applying OTA
Note: If the command does not work try sh /storage/emulated/0/chid.sh instead.
NOTED: YOU ONLY CAN FLASH THE SAME FRIMWARE mean If your phonr on FLYME OS 5.1.9.0C/A, PLS FLASH FLYME OS 5.1.9.0G, 1st THEN YOU CAN FLASH THE HIGHER FRIMWARE.
After that follow this phone, all done

Mr0oHo0 said:
Yes You Can But You Need To Follow This 1st Because if you just flash On A Or C FlyMe It Will Brick You Phone
1. Enable root or make sure you have root privileges
Enable root by tapping on Settings-> Accounts-> My Flyme-> Personal settings (first option) -> System privileges and set it to open - accept disclaimer and confirm. (In Flyme 5.x system privileges is underfingerprint and security*).
2. Download and copy the correct chid. sh file to your phone ( copy to root of your device).
https://drive.google.com/file/d/0B-1xFCo6OJzIUi1nNkU5WVpZaUU/view?pref=2&pli=1
3. (Download and) Launch an Android Shell Terminal Emulator and type the following commands
su
now wait until the $ sign changes in to # (it should change, if not you don’t have root (privileges).
sh /sdcard/chid.sh
x. This should backup your current/original phone ID, replace/change the ID, and Will AUTO reboot your phone After You Do This Finish.
Now you should be able to install I (global) firmware the regular way, which means via an update.zip and the original Meizu recovery. After applying OTA
Note: If the command does not work try sh /storage/emulated/0/chid.sh instead.
NOTED: YOU ONLY CAN FLASH THE SAME FRIMWARE mean If your phonr on FLYME OS 5.1.9.0C/A, PLS FLASH FLYME OS 5.1.9.0G, 1st THEN YOU CAN FLASH THE HIGHER FRIMWARE.
After that follow this phone, all done
Click to expand...
Click to collapse
thank you for your reply, I have followed this guide "https://forum.meizufans.eu/topic/2599/guide-how-to-install-i-international-firmware-on-your-chinese-mainland-meizu" , I think it is the same, but it did not work on m571c "china telecom" iam on Q version Flyme

zaii0007 said:
thank you for your reply, I have followed this guide "https://forum.meizufans.eu/topic/2599/guide-how-to-install-i-international-firmware-on-your-chinese-mainland-meizu" , I think it is the same, but it did not work on m571c "china telecom" iam on Q version Flyme
Click to expand...
Click to collapse
Q version more easy, just download A version firmware then flash over it that all.

I want to ask if the china telecom version(M571C) is ok or not to flash the cm rom of moyster. As I have noticed that the method of unlocking bootloader of that is not the same as the the M571U or other and there is no TWRP for it yet.
If yes, can you provide a tuto? thank you.

imyesbest1 said:
I want to ask if the china telecom version(M571C) is ok or not to flash the cm rom of moyster. As I have noticed that the method of unlocking bootloader of that is not the same as the the M571U or other and there is no TWRP for it yet.
If yes, can you provide a tuto? thank you.
Click to expand...
Click to collapse
Your phone box will saw you at you are M571C right? Belong to China but the phone firmware is Difference, you can flash From Q Flash To A Just download the A firmware UPDATE.ZIP Then Just Flash UPDATE Only, Because My Phone I Buy It At China Too, My Phone Version Is M571C

Mr0oHo0 said:
Your phone box will saw you at you are M571C right? Belong to China but the phone firmware is Difference, you can flash From Q Flash To A Just download the A firmware UPDATE.ZIP Then Just Flash UPDATE Only, Because My Phone I Buy It At China Too, My Phone Version Is M571C
Click to expand...
Click to collapse
Yes, it shows it is M571C. After flash the update of A version, what should I do then to flash cm?

imyesbest1 said:
Yes, it shows it is M571C. After flash the update of A version, what should I do then to flash cm?
Click to expand...
Click to collapse
After you flash A firmware you follow my this post everything will be fine.

Mr0oHo0 said:
Q version more easy, just download A version firmware then flash over it that all.
Click to expand...
Click to collapse
sorry but it does not work for me , iam on flymeos 5.1.5.0 Q i cant install flyme 51.5.0A ,

zaii0007 said:
sorry but it does not work for me , iam on flymeos 5.1.5.0 Q i cant install flyme 51.5.0A ,
Click to expand...
Click to collapse
Q To A You Need The A higher Firmware Then Flash It then okay
But if you want flash "I" firmware you can't higher then "I"

Mr0oHo0 said:
Q To A You Need The A higher Firmware Then Flash It then okay
But if you want flash "I" firmware you can't higher then "I"
Click to expand...
Click to collapse
i have the message "Firmware corrupt"

zaii0007 said:
i have the message "Firmware corrupt"
Click to expand...
Click to collapse
http://www.flyme.cn/firmwarelist-10.html#3 download this Version flyme 5.1.9.0A or flyme 5.1.8.0A
The flash see how, if I never guess wrong Q to A no need to do anything just download and flash

Don't work

zaii0007 said:
Don't work
Click to expand...
Click to collapse
Omgggg

Best & Easiest Way to Rollback to EMUI 4.0 from EMUI5.0 | All Varients & Regions

Best & Easiest Way to Rollback to EMUI 4.0 from EMUI5.0 | All Varients & Regions
Here's every thing you want to know & the easiest method soo far...
http://www.stechguide.com/downgrade-mate-8-from-android-nougat-to-marshmallow/
How to Downgrade Mate 8 from Android Nougat to Marshmallow
Requirement to downgrade Mate 8 to Marshmallow
Mate 8 Stock Marshmallow Firmware
Download Huawei Mate 8 Nougat Rollback Package for Russia
Download Mate 8 Nougat Rollback Package for Asia Pacific
Download Mate 8 Nougat Rollback Package for Middle East & Africa
How to Downgrade Mate 8 from Android Nougat to Marshmallow
1) First, download Android Nougat Rollback Package for Mate 8 from above and extract it.
2) Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3)Now turn off your device.
4) Now press “Volume Up + Volume Down and Power Button” together. The update process will start automatically.
5) Now wait for some time to complete the process. Your firmware version should now be on “B300”.
6) Now download the full Marshmallow firmware from above and extract it.
7) Now move the update.app file in SD card folder (Replace the rollback update.app file).
8) Now again press “Volume Up + Volume Down and Power Button” together to Downgrade Huawei Mate 8 from Android Nougat to Android Marshmallow
9) Done.

Good guide

And for Europa model?

This does not work for NXT-AL10

themes doesn't apply.

Someone try this way for nxt al10? It s work or not ?

Prof1977 said:
Someone try this way for nxt al10? It s work or not ?
Click to expand...
Click to collapse
hisute only for AL10

somboons said:
hisute only for AL10
Click to expand...
Click to collapse
And is there someone which had tried to rollback with HiSuite ? I hesitate. On my side, hisuite propose me to rollback to b386, which may be OK, but I don't want to take risks...I need to be sure it will work

a029159 said:
And is there someone which had tried to rollback with HiSuite ? I hesitate. On my side, hisuite propose me to rollback to b386, which may be OK, but I don't want to take risks...I need to be sure it will work
Click to expand...
Click to collapse
I did it before , roll back from B562 to B197.

somboons said:
I did it before , roll back from B562 to B197.
Click to expand...
Click to collapse
And is it working like before flashing b562 ??? Is it unlocked or relocked for example ?

a029159 said:
And is it working like before flashing b562 ??? Is it unlocked or relocked for example ?
Click to expand...
Click to collapse
I am not sure about phone status,sorry

somboons said:
I am not sure about phone status,sorry
Click to expand...
Click to collapse
But you confirm that all is working well as before flashing NOUGAT ???

Guys who rollback should I download for L29C432? Thanks so much

after i flash this update (middel east) i got black screen and phone stuck on this ???
also when flash b520 i got this black screen but in b520 i flashed TWRP and flash Patchboot for b520 then phone work
can i do this for b200 or b320 and what ver of TWRP for b200 and b320 ??
Edit
fainaly i back to c900b193 and after black screen i do this then open phone
1- fastboot and flash twrp
2- go to srktools files and copy superuser file zip to sdcard
3- go twrp install supeuser.zip
4- reboot system and phone work then i debrand to C185B200 and now got notice for b560
5- downloading b560 now ........

apollo_81 said:
Guys who rollback should I download for L29C432? Thanks so much
Click to expand...
Click to collapse
Do you already have a solution? I've a rollback package for C432B560 on my Home-PC, downloaded from a spanish forum.. The ones from OP Post didn't work for me. If you want to I can upload it anywhere.

Oeminfo vns-l31c636

Hello XDA masters and to you guys ,I'm noob to android modding. Please help me to my problem, I have a huawei vns-l31c636 nougat and I decided to downgrade it on my own without backing up my ROM so I end up bootlooped afterwards so I ran to service center, they managed to repair it back but not fully, its still nougat but its build no. is NRD90M and model is changed also to generic a15 and its Bluetooth is not functioning anymore. It has no file manager so I install one but doesn't function like the original file manager ,if I have to click an application apk file it won't open or install, it has no system updater, hi files, huawei themes and many more ,please help me ,I don't know what to do? I slowly read the threads and its all about oeminfo ,I have the file downloaded ,what to do with it? Thank you!!

kimex909 said:
Hello XDA masters and to you guys ,I'm noob to android modding. Please help me to my problem, I have a huawei vns-l31c636 nougat and I decided to downgrade it on my own without backing up my ROM so I end up bootlooped afterwards so I ran to service center, they managed to repair it back but not fully, its still nougat but its build no. is NRD90M and model is changed also to generic a15 and its Bluetooth is not functioning anymore. It has no file manager so I install one but doesn't function like the original file manager ,if I have to click an application apk file it won't open or install, it has no system updater, hi files, huawei themes and many more ,please help me ,I don't know what to do? I slowly read the threads and its all about oeminfo ,I have the file downloaded ,what to do with it? Thank you!!
Click to expand...
Click to collapse
Search for Unified Help Thread for p9 lite, post 5, downgrading EMUI 5.
Link: https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152

dariomrk said:
Search for Unified Help Thread for p9 lite, post 5, downgrading EMUI 5.
Link: https://forum.xda-developers.com/huawei-p9lite/how-to/unified-help-thread-huawei-p9-lite-t3649152
Click to expand...
Click to collapse
Thank you sir

kimex909 said:
Thank you sir
Click to expand...
Click to collapse
also before downgrading you should flash c432 OEMinfo

dariomrk said:
also before downgrading you should flash c432 OEMinfo
Click to expand...
Click to collapse
Sir my device is c636 is it just okay to flash c432 on it as long as its vns-31??

No, you must be C432 to flash C432B160...
I will link you the oeminfo and how to flash it.
---------- Post added at 02:01 PM ---------- Previous post was at 01:58 PM ----------
Extract oeminfo.img from this:
and exceute this command in fastboot:
Code:
fastboot flash oeminfo oeminfo.img
Then do the dload downgrade with the C432B160 update.app

HUAWEI Enjoy 7S (FIG-AL10) rebranding to HUAWEI P Smart (FIG-LX1): feasible? how?

I bought a Huawei Enjoy 7s (FIG-AL10) in China, but now I would like to rebrand it to a European version (FIG-LX1).
I read tons of posts suggesting to use TWRP, but there is no TWRP available for this phone.
I found a firmware for FIG-LX1 version on Firmware Finder, but now I do not know how to load it into the phone and rebrand it.
Any suggestions?
Thanks.

steveleg said:
I bought a Huawei Enjoy 7s (FIG-AL10) in China, but now I would like to rebrand it to a European version (FIG-LX1).
I read tons of posts suggesting to use TWRP, but there is no TWRP available for this phone.
I found a firmware for FIG-LX1 version on Firmware Finder, but now I do not know how to load it into the phone and rebrand it.
Any suggestions?
Thanks.
Click to expand...
Click to collapse
I bought the huawei P smart which is the European version of Huawei Enjoy 7s. i think we should wait for a forum to be opened here for this device before we can do anything like unlocking bootloader or Rebranding and rooting.
just be patient bro.

I've just found a procedure to root Huawei P Smart, but XDA does not allow me to post the link.
Try to look in google: "Huawei P smart - Root - Anleitung".
It works perfectly. I tried it out on my Huawei Enjoy 7S.
Next thing would be to flash another firmware to change from Chinese to European version, but I'm still not sure how to do it.

steveleg said:
I've just found a procedure to root Huawei P Smart, but XDA does not allow me to post the link.
Try to look in google: "Huawei P smart - Root - Anleitung".
It works perfectly. I tried it out on my Huawei Enjoy 7S.
Next thing would be to flash another firmware to change from Chinese to European version, but I'm still not sure how to do it.
Click to expand...
Click to collapse
But I'm allowed to post the link. The instructions are mine.
https://www.android-hilfe.de/forum/...-smart-how-to-root-root-anleitung.866625.html

ChinHon said:
But I'm allowed to post the link. The instructions are mine.
Click to expand...
Click to collapse
:good::good::good::good:
So maybe you know if I can flash FIG-LX1 8.0.0.122 (C432) firmware on my Huawei Enjoy 7S..

steveleg said:
:good::good::good::good:
So maybe you know if I can flash FIG-LX1 8.0.0.122 (C432) firmware on my Huawei Enjoy 7S..
Click to expand...
Click to collapse
Try the procedure from my root thread [How to Unbrick]. There's the C432 cust in there.

ChinHon said:
Try the procedure from my root thread [How to Unbrick]. There's the C432 cust in there.
Click to expand...
Click to collapse
I just tried, but system.img writing failed.
In the rescue.exe compressed folder it seems that there are two files: system.img and vendor.img.
Is vendor.img to be renamed to cust.img?

Sorry. I uploaded vendor instead of cust. Will replace the download by tomorrow.
Just translated the tuto:
https://forum.xda-developers.com/general/general/how-to-root-huawei-p-smart-fig-lx1-t3752705

ChinHon said:
Sorry. I uploaded vendor instead of cust. Will replace the download by tomorrow.
I tried to flash from fastboot cust.img and system.img of P Smart on Enjoy 7S but writing failed.
Probably rebrand on this phone involves other partitions or files (oeminfo?) that I'm still not aware of.
I hope a procedure for rebrand will be released soon.
Click to expand...
Click to collapse

@steveleg
Looking over your post i would like to do the same thing.
Have you had any luck? I see there is a TWRP out and an update at the above link to android-hilfe forum. I did post a reply there but seem to have had my account locked for now :crying:, so though i might see how you did while i wait for help.

What is the name of your account? (Savvoh)? I'm moderator there.

ChinHon said:
What is the name of your account? (Savvoh)? I'm moderator there.
Click to expand...
Click to collapse
Hey @ChinHon, exact same as here. Savvoh
Error: Du wurdest aus folgendem Grund gesperrt: Wegwerf-Mail.

.....

Savvoh said:
Hey @ChinHon, exact same as here. Savvoh
Error: Du wurdest aus folgendem Grund gesperrt: Wegwerf-Mail.
Click to expand...
Click to collapse
Your account is open again. Please remember to always include a German translation with your questions. Only then will you get an answer.
:good:

ChinHon said:
Your account is open again. Please remember to always include a German translation with your questions. Only then will you get an answer.
:good:
Click to expand...
Click to collapse
Thanks so much, really appreciate the help. I will do so in the future.
Just to confirm what would be the reason to flash and install a TWRP? For dev reasons only?
Or just to remove all the preset Chinese settings?

@ChinHon
Interesting i can install all the services from Google-Installer-v3 onto a Enjoy 7S, but can not open the Play Store or Drive as it just hangs on the loading screen. And never actually goes in.
Haha, im stumped .

Find the current Playstore Apk from the net and install it.
TWRP is necessary for Magisk rooting or to create backups or flash zip`s.
I can't help much with dabranding. I don't know very much about that.

Savvoh said:
@steveleg
Looking over your post i would like to do the same thing.
Have you had any luck? I see there is a TWRP out and an update at the above link to android-hilfe forum. I did post a reply there but seem to have had my account locked for now :crying:, so though i might see how you did while i wait for help.
Click to expand...
Click to collapse
I tried in several ways to install C432 firmware on my Enjoy 7S, but no way to flash System.img.
As soon as I flash C432 oeminfo file FRP gets locked and I cannot flash anything anymore.
I tried also Dc Unlocker tools, but System.img flashing stops with the message "Sparse flash write failure".
I'm still looking for somebody who managed to rebrand the Enjoy 7S to P Smart.

steveleg said:
I tried in several ways to install C432 firmware on my Enjoy 7S, but no way to flash System.img.
As soon as I flash C432 oeminfo file FRP gets locked and I cannot flash anything anymore.
I tried also Dc Unlocker tools, but System.img flashing stops with the message "Sparse flash write failure".
I'm still looking for somebody who managed to rebrand the Enjoy 7S to P Smart.
Click to expand...
Click to collapse
I wish i could help,I cant currently even get any Google option on the Enjoy 7S to run. Even trying to add a google account to cloud just freezes. Seems as soon as any Google option is chosen, the Google Services just states "Restarting".
Out of options.

Google services installation was an easy task compared to rebrand.
Download GMS from the link below:
https://mega.nz/#!WqYwyLyD!l7H8WRHBHs0ZwpyE0w2c7n6AvTSpTF29KjjX7_MM2u8
Procedure:
1. Install GMS (it is going to clear all previous google apps and restart the phone)
2. Install google play that I included in the zip file.
Let me know. For me it worked like a charm.

Huawei p9 lite update problem

I bought Huawei p9 lite vns l31, and i used firmware finder app and update it through ERecovery mod, then my P9 lite changes to the Chinese version vns-aloo.
Please would anyone help me get my p9 lite VNS-L31 back?

Ameeiin said:
I bought Huawei p9 lite vns l31, and i used firmware finder app and update it through ERecovery mod, then my P9 lite changes to the Chinese version vns-aloo.
Please would anyone help me get my p9 lite VNS-L31 back?
Click to expand...
Click to collapse
Hello,
this happened because you
choose that firmware...
you are very lucky you didn't bricked your device.
You could try to use Firmware Finder again
to revert back to your previous version,
but as i told, you could brick it,
that's your choice.
Another way is unlock the bootloader,
install a custom recovery (TWRP),
flash an OEMinfo file and your correct firmware.
It depends on the android version,
on the region (CUST) in which you live
or for which the firmware has been released
and if the device is single or dual sim.
Good luck dude !
P.S.: took a look and it seems
the link for Hassan's twrp download
is no longer available...
Maybe other twrps are still available,
but i'm pretty sure someone could
repost it for you...

I have tried to reinstall it to my previous version, but it didn't work.
The model does not have an oem unload option in t
Dadditz said:
Hello,
this happened because you
choose that firmware...
you are very lucky you didn't bricked your device.
You could try to use Firmware Finder again
to revert back to your previous version,
but as i told, you could brick it,
that's your choice.
Another way is unlock the bootloader,
install a custom recovery (TWRP),
flash an OEMinfo file and your correct firmware.
It depends on the android version,
on the region (CUST) in which you live
or for which the firmware has been released
and if the device is single or dual sim.
Good luck dude !
P.S.: took a look and it seems
the link for Hassan's twrp download
is no longer available...
Maybe other twrps are still available,
but i'm pretty sure someone could
repost it for you...
Click to expand...
Click to collapse
I ha
Dadditz said:
Hello,
this happened because you
choose that firmware...
you are very lucky you didn't bricked your device.
You could try to use Firmware Finder again
to revert back to your previous version,
but as i told, you could brick it,
that's your choice.
Another way is unlock the bootloader,
install a custom recovery (TWRP),
flash an OEMinfo file and your correct firmware.
It depends on the android version,
on the region (CUST) in which you live
or for which the firmware has been released
and if the device is single or dual sim.
Good luck dude !
P.S.: took a look and it seems
the link for Hassan's twrp download
is no longer available...
Maybe other twrps are still available,
but i'm pretty sure someone could
repost it for you...
Click to expand...
Click to collapse
Tnx bro but I have tried reinstalling my previous version two times, but it didn't work.
In this case, the oem unlock toggle is missing, so please is there any way to unlock the bootloader without it?

Ameeiin said:
the oem unlock toggle is missing
Click to expand...
Click to collapse
Chinese firmware doesn't have oem unlock option, it's normal.

-Alf- said:
Chinese firmware doesn't have oem unlock option, it's normal.
Click to expand...
Click to collapse
So now what will I do please?

Ameeiin said:
So now what will I do please?
Click to expand...
Click to collapse
Look here .
Ameeiin said:
the oem unlock toggle is missing
Click to expand...
Click to collapse
btw, it's an advantage

-Alf- said:
Look here .
btw, it's an advantage
Click to expand...
Click to collapse
Thanks

Can i use my android phone to unlock the bootloader without pc?

Ameeiin said:
Can i use my android phone to unlock the bootloader without pc?
Click to expand...
Click to collapse
No.
At least up to my knowledge, it is impossible to get the code without a PC (more precisely, you can unlock BL without PC only if you have the unlock code).

-Alf- said:
No.
At least up to my knowledge, it is impossible to get the code without a PC (more precisely, you can unlock BL without PC only if you have the unlock code).
Click to expand...
Click to collapse
Ok, So please where can I get the unlock code?

Ameeiin said:
I bought Huawei p9 lite vns l31, and i used firmware finder app and update it through ERecovery mod, then my P9 lite changes to the Chinese version vns-aloo.
Please would anyone help me get my p9 lite VNS-L31 back?
Click to expand...
Click to collapse
I have an idea, can i flash it with Huawei p9 lite firmware?

Ameeiin said:
I have an idea, can i flash it with Huawei p9 lite firmware?
Click to expand...
Click to collapse
You can try flash it with Service ROM Download . Type VNS-L31, or VNS- .
Download correct firmware - EMUI version, Cxxx (the bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download. Select your previous Cxxx, not current C00 ) and single/dual SIM (all firmwares that end with even numbers are for dual SIM, odd numbers are for single SIM).
Instructions can be found in 'ReleaseDoc' folder.
If you cannot unpack downloaded zip archive on PC, unpack it in the internal memory using this RAR apk.
Extracted 'dload' folder copy/transfer to the SD card. Good luck.

-Alf- said:
You can try flash it with Service ROM Download . Type VNS-L31, or VNS- .
Download correct firmware - EMUI version, Cxxx (the bracketed (Cxxx) is your device’s regional variant.
This number is very important in determining the correct firmware to download. Select your previous Cxxx, not current C00 ) and single/dual SIM (all firmwares that end with even numbers are for dual SIM, odd numbers are for single SIM).
Instructions can be found in 'ReleaseDoc' folder.
If you cannot unpack downloaded zip archive on PC, unpack it in the internal memory using this RAR apk.
Extracted 'dload' folder copy/transfer to the SD card. Good luck.
Click to expand...
Click to collapse
I forgot the last cxxx of the build number, but the model is l31 for sure, dual sim and comes with Android version 6.0, EMUI 4.1

There's no Service ROM for EMUI 4.1 , you have to flash UPDATE.APP file.
Ameeiin said:
I forgot the last cxxx of the build number
Click to expand...
Click to collapse
where are you from if I may ask?
Just to be sure - on this website you can get info about target country (Country , Valid for..., Supported country...)

-Alf- said:
There's no Service ROM for EMUI 4.1 , you have to flash UPDATE.APP file.
Can you explain to me in detail please?
Click to expand...
Click to collapse

where are you from if I may ask?
Just to be sure - on this website you can get info about target country (Country , Valid for..., Supported country...)
[/QUOTE]
Nigeria

Ameeiin said:
Nigeria
Click to expand...
Click to collapse
I think it's C636 , but I'm not sure.
Any forced flash with wrong region will bring your phone to C900 (global) or will brick your phone.
I can't help you anymore, sorry...

Ok thanks.

I can't help you anymore, sorry...
[/QUOTE]
-Alf- said:
I can't help you anymore, sorry...
Click to expand...
Click to collapse
-Alf- said:
I can't help you anymore, sorry...
Click to expand...
Click to collapse
But why if you doesn't mind.

Ameeiin said:
why
Click to expand...
Click to collapse
if you don't know what your default region is, and without a PC it's just Russian roulette .