Global Rom is officialy out!
it turns out 9.6.4.0.OEDMIFD is a real global rom with a broken modem.
just update to newer releases that might fix the issue.
You cant just flash the global rom over an Antirollback rom as the global rom doesnt have Antirollback. (it will brick your device)
Guide to installing global rom on antirollback devices & installing global rom with fixed modem (for calls and internet) over china rom (no ARB): here
Download Links for Official Global Rom: here
Antirollback information: here
Thanks and have a great day!
omer919 said:
Hello there people!
our lovely new Mi Max 3 is now available for purchase on many websites.
These websites sell you a "MULTILANGUAGE rom" or "Global Rom".
The version that they sell is 9.6.4.0.OEDMIFD
Unfortunately this rom is FAKE / Un-Official and is dangerous for your device!
Why? because to install this shady rom they need to unlock your bootloader unofficialy and install a rom which was not originaly designed for Mi Max 3! this rom bricks some partitions of your device and may cause a lot of issues later! Some say that this rom may cause damage to the ability to flash roms and more onto your device or to move to official rom / xiaomi.eu rom
THERE ISNT ANY OFFICIAL GLOBAL ROM AVAILABLE FOR MI MAX 3 YET!
I suggest not to buy the Mi Max 3 with a "MULTILANGUAGE rom" or "Global Rom". (Please notice that some people that have asked not to install the fake rom got their devices with the fake rom even though they asked!)
Be patient and wait for official global rom from en.miui.com
Have a great day!
Click to expand...
Click to collapse
I have this rom .any solution
sintboy2020 said:
I have this rom .any solution
Click to expand...
Click to collapse
I suggest flashing the latest china beta rom using fastboot mode
MAKE SURE THAT YOUR BOOTLOADER IS UNLOCKED
download: here
after that flash xiaomi.eu rom
tutorial: here
Why do you need to flash both the china beta rom and the xiaomi.eu rom?
The flashing of xiaomi.eu does not delete everything previously installed anyway?
omer919 said:
I suggest flashing the latest china beta rom using fastboot mode
MAKE SURE THAT YOUR BOOTLOADER IS UNLOCKED
download: here
after that flash xiaomi.eu rom
tutorial: here
Click to expand...
Click to collapse
itay457 said:
Why do you need to flash both the china beta rom and the xiaomi.eu rom?
The flashing of xiaomi.eu does not delete everything previously installed anyway?
Click to expand...
Click to collapse
Fastboot china rom will wipe all partitions and reinstall them.
Xiaomi.eu recovery rom only changes the SYSTEM partition, remember you are coming from a fake rom so you might not want to have broken partitions from the flashing of the fake rom.
My Max 3 comes with this so-called "Global" ROM.
I checked my bootloader and it says Unlocked. So yesterday I downloaded CN ROM and flashed it via fastboot.
Ok, I understand. "fastboot china rom" means it should only be installed through fastboot? or its also possible through custom recovery?
omer919 said:
Fastboot china rom will wipe all partitions and reinstall them.
Xiaomi.eu recovery rom only changes the SYSTEM partition, remember you are coming from a fake rom so you might not want to have broken partitions from the flashing of the fake rom.
Click to expand...
Click to collapse
itay457 said:
Ok, I understand. "fastboot china rom" means it should only be installed through fastboot? or its also possible through custom recovery?
Click to expand...
Click to collapse
MAKE SURE THAT YOUR BOOTLOADER IS UNLOCKED BEFORE DOING THIS OR YOU WILL BRICK YOUR DEVICE
Fastboot roms are flashed through a special tool by xiaomi which can be found: here
You also might need adb drivers which are found: here
1. Open the drivers file and click "y" for every option that it asks for.
1. Install the fastboot tool tool
2. Download the fastboot rom that you wanna flash
3. Unzip the rom to a folder on your pc
4. Open the tool and in bottom right corner there will be 3 options, select "clean all"
5. Click on the "select" button on top left corner and head to the folder that you unziped, select it.
6. On your device enable "USB debugging", "install via USB", "USB Debugging (security settings)", and disable "verify apps over USB" (Developers options are enabled by going to "about phone" then spam clicking the "MIUI version" until it says that your are a developer. then go to "additional setting" and you will find "developer options")
7. Boot your device to fastboot mode by holding down the vol- + power key together until you see a bunny with fastboot sign.
8. Connect your device to your PC and click the "refresh" button on top right corner. (your phone should now appear in the list)
9. Click "flash" and wait until your device boots to the MI logo and 3 dots. (DONT DISCONNECT YOUR DEVICE BEFORE THAT!!!)
10. Wait for your device to boot up
11. Enjoy!
Hi, So if I buy with China ROM (Outside China - I live in Thailand) I can download and change to Global ROM once it's released?
China ROM will still get updates, though right?
Sorry for numpty question!
This is the ROM on my girlfriends Mi Max 3.
Thanks for the info but it would also be good if you posted up how to check if the bootloader is unlocked seeing how important it is before doing any steps.
Also you state that for the people to put on the fake ROM they had to unlock the bootloader in the first place so would they then relock the bootloader? Won't all phones with fake ROMs have unlocked bootloaders?
Wam7 said:
This is the ROM on my girlfriends Mi Max 3.
Thanks for the info but it would also be good if you posted up how to check if the bootloader is unlocked seeing how important it is before doing any steps.
Also you state that for the people to put on the fake ROM they had to unlock the bootloader in the first place so would they then relock the bootloader? Won't all phones with fake ROMs have unlocked bootloaders?
Click to expand...
Click to collapse
Check if you can install twrp, if you can its unlocked.
You may never know...
This procedure work on 128 Gb mi max 3 ?
Thank you
I ordered a one from Eternal Team on Ali before I seen this and asked them about the fake rom and the bootloader after it was sent this is the reply .....
Dear friend:
Welcome to our store . /:000
Sorry for the late reply .
It's locked . But you could use the Google play and use all the function normally . If you need use the Mi service . You need unlock it by yourself .
Please check this link:http://en.miui.com/unlock/
Best regards,
Cassie-- ET
(Working time: GMT+8, 9:00 am-6:30 pm, Mon-Fri)
So looks like the bootloader is locked and this fake rom is installed.
Great
omer919 said:
Check if you can install twrp, if you can its unlocked.
You may never know...
Click to expand...
Click to collapse
Thanks for the advice and I really appreciate your help but could you give some clearer step by step instructions as many people are not coming from a Xiaomi world. I come from Note4 and for me to install TWRP I do this using Odin but;
1) In simple step by step guide, how do you install TWRP on the Mi Max 3?
2). How do you unlock the bootloader - I go to https://en.miui.com/unlock/ and it starts in English then the next page is in Mandarin so not good to me.
These and other basics instructions are needed to be clearly detailed in a thread as there will be many people following me with the same questions/issues.
lucaxxaa said:
This procedure work on 128 Gb mi max 3 ?
Thank you
Click to expand...
Click to collapse
Also looking for an answer to this, does anyone know?
lucaxxaa said:
This procedure work on 128 Gb mi max 3 ?
Thank you
Click to expand...
Click to collapse
Tharg0r said:
Also looking for an answer to this, does anyone know?
Click to expand...
Click to collapse
Yes
Wam7 said:
Thanks for the advice and I really appreciate your help but could you give some clearer step by step instructions as many people are not coming from a Xiaomi world. I come from Note4 and for me to install TWRP I do this using Odin but;
1) In simple step by step guide, how do you install TWRP on the Mi Max 3?
2). How do you unlock the bootloader - I go to https://en.miui.com/unlock/ and it starts in English then the next page is in Mandarin so not good to me.
These and other basics instructions are needed to be clearly detailed in a thread as there will be many people following me with the same questions/issues.
Click to expand...
Click to collapse
1. yes go: here
2. You need to create a mi account on global forums and then use them to apply, assign the account to your phone in developer settings and unlock your phone after you got perms. search for a vid on how to unlock the bootloader on xiaomi devices on YT for a better guide.
Thanks for the info.
omer919 said:
1. yes go: here
2. You need to create a mi account on global forums and then use them to apply, assign the account to your phone in developer settings and unlock your phone after you got perms. search for a vid on how to unlock the bootloader on xiaomi devices on YT for a better guide.
Click to expand...
Click to collapse
Excellent, thanks that is much clearer.
I checked this video on youtube for checking 'locked bootloader' and also how to unlock.
https://www.youtube.com/watch?v=zL2omn9PGc4
I did not need to unlock becasue as I rightly guessed the bootloader is still unlocked. (pic attached). This is on both the Mi Max 3's that I have.
So I'll just start the process of flashing the Chinese ROM (to make sure of partition integrity) via Fastboot and then installing TWRP, and then flash the Xiaomi.eu ROM.
OK omer919, thanks to you I have flashed the Chinese MUI10 Fastboot ROM.
Unfortunately the link to the TWRP instructions is not good at the moment as the TWRP link in that thread is not working and the thread is now closed.
Do you (or anyone else) have a working link to TWRP for Mi Max 3 so I can install the Xiaomi.eu ROM?
Related
When can we expect to see TWRP and xiaomi.eu support for the Pro?
Does anyone know if Xiaomi's bootloader unlocking tool supports the Pro?
I didn't see any mention of it on the MIUI forum, and I'd much prefer to linger here than there.
I think you will not get good support, because for that price you can get a MI5, with Snapdragon 820. The other thing is xiaomi need a snapdragon version for India, like by the redmi note 3.
TWRP and developer ROM EU is present today on xiaomi.eu!
Bootloader tool unlock of Xiaomi work great on this phone
vigorsolair said:
TWRP and developer ROM EU is present today on xiaomi.eu!
Bootloader tool unlock of Xiaomi work great on this phone
Click to expand...
Click to collapse
Can you help me to unlock bootloader
And Root the Phone?
Please...
3llawi said:
Can you help me to unlock bootloader
And Root the Phone?
Please...
Click to expand...
Click to collapse
Its not hard, you just need to go to "en . miui .com /unlock" and follow instructions.
When your phone is unlocked you can install TWRP with fastboot and then install custom ROMs or root.
Delete post!
this work on M571c from china telecom ????
zaii0007 said:
this work on M571c from china telecom ????
Click to expand...
Click to collapse
Yes can work but you need to flash A FLYME 1st then can flash CM
Mr0oHo0 said:
Yes can work but you need to flash A FLYME 1st then can flash CM
Click to expand...
Click to collapse
thanck you Brother for reply , any tuto to do this ?
zaii0007 said:
thanck you Brother for reply , any tuto to do this ?
Click to expand...
Click to collapse
Yes You Can But You Need To Follow This 1st Because if you just flash On A Or C FlyMe It Will Brick You Phone
1. Enable root or make sure you have root privileges
Enable root by tapping on Settings-> Accounts-> My Flyme-> Personal settings (first option) -> System privileges and set it to open - accept disclaimer and confirm. (In Flyme 5.x system privileges is underfingerprint and security*).
2. Download and copy the correct chid. sh file to your phone ( copy to root of your device).
https://drive.google.com/file/d/0B-1xFCo6OJzIUi1nNkU5WVpZaUU/view?pref=2&pli=1
3. (Download and) Launch an Android Shell Terminal Emulator and type the following commands
su
now wait until the $ sign changes in to # (it should change, if not you don’t have root (privileges).
sh /sdcard/chid.sh
x. This should backup your current/original phone ID, replace/change the ID, and Will AUTO reboot your phone After You Do This Finish.
Now you should be able to install I (global) firmware the regular way, which means via an update.zip and the original Meizu recovery. After applying OTA
Note: If the command does not work try sh /storage/emulated/0/chid.sh instead.
NOTED: YOU ONLY CAN FLASH THE SAME FRIMWARE mean If your phonr on FLYME OS 5.1.9.0C/A, PLS FLASH FLYME OS 5.1.9.0G, 1st THEN YOU CAN FLASH THE HIGHER FRIMWARE.
After that follow this phone, all done
Mr0oHo0 said:
Yes You Can But You Need To Follow This 1st Because if you just flash On A Or C FlyMe It Will Brick You Phone
1. Enable root or make sure you have root privileges
Enable root by tapping on Settings-> Accounts-> My Flyme-> Personal settings (first option) -> System privileges and set it to open - accept disclaimer and confirm. (In Flyme 5.x system privileges is underfingerprint and security*).
2. Download and copy the correct chid. sh file to your phone ( copy to root of your device).
https://drive.google.com/file/d/0B-1xFCo6OJzIUi1nNkU5WVpZaUU/view?pref=2&pli=1
3. (Download and) Launch an Android Shell Terminal Emulator and type the following commands
su
now wait until the $ sign changes in to # (it should change, if not you don’t have root (privileges).
sh /sdcard/chid.sh
x. This should backup your current/original phone ID, replace/change the ID, and Will AUTO reboot your phone After You Do This Finish.
Now you should be able to install I (global) firmware the regular way, which means via an update.zip and the original Meizu recovery. After applying OTA
Note: If the command does not work try sh /storage/emulated/0/chid.sh instead.
NOTED: YOU ONLY CAN FLASH THE SAME FRIMWARE mean If your phonr on FLYME OS 5.1.9.0C/A, PLS FLASH FLYME OS 5.1.9.0G, 1st THEN YOU CAN FLASH THE HIGHER FRIMWARE.
After that follow this phone, all done
Click to expand...
Click to collapse
thank you for your reply, I have followed this guide "https://forum.meizufans.eu/topic/2599/guide-how-to-install-i-international-firmware-on-your-chinese-mainland-meizu" , I think it is the same, but it did not work on m571c "china telecom" iam on Q version Flyme
zaii0007 said:
thank you for your reply, I have followed this guide "https://forum.meizufans.eu/topic/2599/guide-how-to-install-i-international-firmware-on-your-chinese-mainland-meizu" , I think it is the same, but it did not work on m571c "china telecom" iam on Q version Flyme
Click to expand...
Click to collapse
Q version more easy, just download A version firmware then flash over it that all.
I want to ask if the china telecom version(M571C) is ok or not to flash the cm rom of moyster. As I have noticed that the method of unlocking bootloader of that is not the same as the the M571U or other and there is no TWRP for it yet.
If yes, can you provide a tuto? thank you.
imyesbest1 said:
I want to ask if the china telecom version(M571C) is ok or not to flash the cm rom of moyster. As I have noticed that the method of unlocking bootloader of that is not the same as the the M571U or other and there is no TWRP for it yet.
If yes, can you provide a tuto? thank you.
Click to expand...
Click to collapse
Your phone box will saw you at you are M571C right? Belong to China but the phone firmware is Difference, you can flash From Q Flash To A Just download the A firmware UPDATE.ZIP Then Just Flash UPDATE Only, Because My Phone I Buy It At China Too, My Phone Version Is M571C
Mr0oHo0 said:
Your phone box will saw you at you are M571C right? Belong to China but the phone firmware is Difference, you can flash From Q Flash To A Just download the A firmware UPDATE.ZIP Then Just Flash UPDATE Only, Because My Phone I Buy It At China Too, My Phone Version Is M571C
Click to expand...
Click to collapse
Yes, it shows it is M571C. After flash the update of A version, what should I do then to flash cm?
imyesbest1 said:
Yes, it shows it is M571C. After flash the update of A version, what should I do then to flash cm?
Click to expand...
Click to collapse
After you flash A firmware you follow my this post everything will be fine.
Mr0oHo0 said:
Q version more easy, just download A version firmware then flash over it that all.
Click to expand...
Click to collapse
sorry but it does not work for me , iam on flymeos 5.1.5.0 Q i cant install flyme 51.5.0A ,
zaii0007 said:
sorry but it does not work for me , iam on flymeos 5.1.5.0 Q i cant install flyme 51.5.0A ,
Click to expand...
Click to collapse
Q To A You Need The A higher Firmware Then Flash It then okay
But if you want flash "I" firmware you can't higher then "I"
Mr0oHo0 said:
Q To A You Need The A higher Firmware Then Flash It then okay
But if you want flash "I" firmware you can't higher then "I"
Click to expand...
Click to collapse
i have the message "Firmware corrupt"
zaii0007 said:
i have the message "Firmware corrupt"
Click to expand...
Click to collapse
http://www.flyme.cn/firmwarelist-10.html#3 download this Version flyme 5.1.9.0A or flyme 5.1.8.0A
The flash see how, if I never guess wrong Q to A no need to do anything just download and flash
Don't work
zaii0007 said:
Don't work
Click to expand...
Click to collapse
Omgggg
Hi all,
Recently, I go through this forum and found there are many custom roms ready for this Le Pro3 phone. After consider the hardware specification and cost, finally I procured Le Pro3 (x720) phone.
However, when I received this phone, I found the latest EUI already installed (EUI 5.9.026s). When I go through the instructions provided by XDA forum, I found there almost no way to unlock the bootloader of this phone if this came with EUI 5.9.026s.
Can someone tell me if there is a way to unlock this bootloader if this phone is came with EUI 5.9.026s? If not, can I still can refresh my phone with some custom roms (like Omni rom on lineage OS?)
Thanks
I have no trouble with my x720, first time flashed customs on 20s, but few days ago returned from stock 26s to custom. Can't you unlock your phone?
No luck on unlock.
I believe you already installed TWRP before upgrade to 26s, so you can falsh back to previous version.
Have you official ROM and followed the unlock guide?
I follow the unlock Guide but no luck. I go through few discussion in XDA forum, seems some major changes in OS permission settings on 26s rom
Maybe flash 23s, wipe then try?
I cannot try it, but maybe it's possible to fool the update system. By modifying the update script of a 23s OTA file you can bypass the check for rom and modem version, then the system will execute a "downgrade" from 26s to 23s. This theorically, I can't try if it really works but the right path can be this! Cheers!
Sent from my LEX720 using XDA Labs
I did downgrades from 20s to 18s and from 23s to 20s... Seems buggy, but after wipes worked perfectly.
@marik1
How did you do the downgrade? Is the way you downgraded possible with a locked bootloader? Thank you.
(I am considering buying a Le Pro 3, but I will probably wait until I know that unlocking the bootloader is possible with the new EUI installed.)
For me it's simply flashing file with ROM called "update.zip" and placed into main folder trough LeEco's recovery. Like making update, but with different file.
I tested qfil by following the thread here to flash the previous rom but no luck, when I use qfil, I am quite sure the phone is connected ( I can see the com port), the process started(rom are unzipping), but when the system try to write on the disk, the process failed. I wonder if there are any permission/encryption settings applied on the partition of 26s rom, and not sure if I can downgrade due to partition permission.
BTW, where can I download 23s rom? and how to modify the script to prevent version check? thanks
marik1 said:
For me it's simply flashing file with ROM called "update.zip" and placed into main folder trough LeEco's recovery. Like making update, but with different file.
Click to expand...
Click to collapse
Where to download this file? and the file should place on main folder but not root folder, right?
Just flash it, without changing version checking. You can take it from LeEco website;
https://bbs.le.com/zt/eui/le_pro3.html
You can also have trouble with connect, so you have to remove :110 from link and you gain;
http://107.155.49.13/222/8/95/scmau...e=0&vrtmcd=109&buss=60001&cips=159.205.89.106
Developer options，unlock OEM
Can someone confirm that unlock works for new devices which are shipped with the new software version? @andylcm please let us know if you get it working. thanks
nomailing said:
Can someone confirm that unlock works for new devices which are shipped with the new software version? @andylcm please let us know if you get it working. thanks
Click to expand...
Click to collapse
the problems have been fixed.
Actually, I follow the unlock guide here, the problems was on this bootloader unlock guide but not on the phone itself.
@andylcm
Could you please explain what you did differently from the guide?
Is this the guide you are referring to? https://forum.xda-developers.com/le-pro3/how-to/leeco-le-pro-3-root-t3476560
I know that device info command shold be device-info
Hello guys,
I get an Xiaomi RN7 and i'm waiting to unlock my bootloader (72h left), so i have time to ask some questions.
1/ How to keep MIUI with TWRP (and Magisk) ?
2/ There is a MIUI Global Rom i can install with TWRP ?
Sorry if my english isn't perfect, that's not my native language.
---
My experience before ;
i had install TWRP on my old phone (xiaomi RN4 - mido),
I root him with Magisk,
But in these step i lost my official ROM, and i rly want to keep MIUI on my Xiaomi Redmi Note 7, that's why i ask u there 2 questions
You can flash xiaomi.eu from twrp. Newer MIUI, no bloat/ads, more features.
xiaomi.eu ? Do you have a link pls ? i didnt found it on google
and thank's a lot for helping me !
Here you go: https://xiaomi.eu/community/
You have "developer" and "stable" releases.
Just to be sure, on that link :
https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-10-3-stable-release.47170/
then
DOWNLOAD MIUIv10.3 STABLE
https://www.androidfilehost.com/?w=files&flid=292396
depend on my phone, so the HMNote7
"xiaomi.eu_multi_HMNote7_V10.3.2.0.PFGCNXM_v10-9.zip" right?
--
Did the OTA update is working ?
can someone can confirm me that please ?
Pactil said:
can someone can confirm me that please ?
Click to expand...
Click to collapse
confirmed. im on that specific eu rom right now.
Thank's all for helping me !
I have one more problem..
My bootloader is now unlocked and i want install TWRP, i have adb on my pc.
I download https://forum.xda-developers.com/redmi-note-7/development/recovery-twrp-3-3-0-t3923835
I put the the file in my ADB folder, open command and i do the "fastboot flash recovery twrp_lavender.img"
installation is ok on my command
BUT when i reboot my phone in recovery mode, that not TWRP but the official recovery ...
Can u tell me what i'm doing wrong pls ?
Pactil said:
I have one more problem..
My bootloader is now unlocked and i want install TWRP, i have adb on my pc.
I download https://forum.xda-developers.com/redmi-note-7/development/recovery-twrp-3-3-0-t3923835
I put the the file in my ADB folder, open command and i do the "fastboot flash recovery twrp_lavender.img"
installation is ok on my command
BUT when i reboot my phone in recovery mode, that not TWRP but the official recovery ...
Can u tell me what i'm doing wrong pls ?
Click to expand...
Click to collapse
Follow these exact steps: after flashing recovery plug off your usb cable while still in fastboot, then long press Power + Vol-Up until you see the Redmi logo.
Pactil said:
Just to be sure, on that link :
https://xiaomi.eu/community/threads/miui-10-0-10-1-10-2-10-3-stable-release.47170/
then
DOWNLOAD MIUIv10.3 STABLE
https://www.androidfilehost.com/?w=files&flid=292396
depend on my phone, so the HMNote7
"xiaomi.eu_multi_HMNote7_V10.3.2.0.PFGCNXM_v10-9.zip" right?
--
Did the OTA update is working ?
Click to expand...
Click to collapse
This Eu rom, can be flash on any version, from global, European to India?
I mean on PFGMIXM, PFGEUXM, PFHINXM?
This doesn't matter,can go on every single one? I have PFGMIXM
thunderteaser said:
Follow these exact steps: after flashing recovery plug off your usb cable while still in fastboot, then long press Power + Vol-Up until you see the Redmi logo.
Click to expand...
Click to collapse
Damn thx dude ! that's worked !
tze_vitamin said:
This Eu rom, can be flash on any version, from global, European to India?
I mean on PFGMIXM, PFGEUXM, PFHINXM?
This doesn't matter,can go on every single one? I have PFGMIXM
Click to expand...
Click to collapse
I'm living in france and i get a Global ROM
Pactil said:
I'm living in france and i get a Global ROM
Click to expand...
Click to collapse
I live in Serbia and also get like you PFGMIXM.. global.
hi,
I have unlock bootloader and using global rom v12.0.4. I would like to
1. lock bootloader
2. and install fastboot EU rom v12.0.7
is it safe to do so? because McDonalds app is detecting unlock bootloader
jyaki2 said:
1. lock bootloader
2. and install fastboot EU rom v12.0.7
Click to expand...
Click to collapse
No, you can't, because the locked bootloader will detect which ROM is installed, so if a different ROM is installed with locked bootloader, it will only boot into the recovery and show "This MIUI version can't be installed on this device" error, then you will need to unlock the bootloader again.
Edit: According to @Eam31961, you can relock the bootloader with a different region of ROM installed on M3. I have also tried it, it works.
jyaki2 said:
because McDonalds app is detecting unlock bootloader
Click to expand...
Click to collapse
To use it with unlocked bootloader, you can install Magisk, and make sure to use Magisk hide, and also hide the Magisk manager with a random pacakge name in Magisk's settings.
cbw said:
NO, you can't, because the locked bootloader will detect which ROM is installed, so if a different ROM is installed with locked bootloader, it will only boot into the recovery and show "This MIUI version can't be installed on this device" error, then you will need to unlock the bootloader again.
To use it with unlocked bootloader, you can install Magisk, and make sure to use Magisk hide, and also hide the Magisk manager with a random pacakge name in Magisk's settings.
Click to expand...
Click to collapse
For me is different from your experience may be. My POCO M3 default ROM was JFEUXM which means EU Global Version then I switched to JFIDXM for Indonesian ROM with features of AutoCall Recording and Mi Message and bootloader reLocked and now it's Locked. With no problem.
Eam31961 said:
For me is different from your experience may be. My POCO M3 default ROM was JFEUXM which means EU Global Version then I switched to JFIDXM for Indonesian ROM with features of AutoCall Recording and Mi Message and bootloader reLocked and now it's Locked. With no problem.
Click to expand...
Click to collapse
Maybe POCO M3 is different, I didn't test a different region ROM on it.
Thank you for letting me know.
I got the error when I tried to install Indian ROM on my China version of Redmi 6 Pro.
cbw said:
Maybe POCO M3 is different, I didn't test a different region ROM on it.
Thank you for letting me know.
I got the error when I tried to install Indian ROM on my China version of Redmi 6 Pro.
Click to expand...
Click to collapse
Okay, bro, I got you. I read from another forum that accordingly, China ROM can't be re-lock to other Region ROM but you can revert back to China ROM and re-lock it.
I have now installed the Taiwan ROM (QJFTWXM) on my M3 which came with a global ROM (QJFMIXM), yes it works, I chose the option clean all and lock.
Now with the Taiwan ROM, I have MIUI dialer and message apps, call recording also works, and it does not have any issues.
Thank you @Eam31961 !