Database Users

Share you charging time with rom details!

So i flashed a custom rom just yesterday and since then I have been noticing a huge increase in charging time of my device. It is taking twice as long to reach a full charge.
Idea is to share how much time it takes on your device to reach a full charge with what rom and kernel!
Happy posting

I'm on ihackers 2.1.
I'm charging with N7 charger (Asus charger)
Input 100 240 V
Output 5.0 V -- 2.0 A
Model AD83501
This charger charge Z1 in 45-60 min (from 5%-100%)
Using stock charger it needs 1,5h to do same thing.
Sent from my Nexus 7 using Tapatalk

funky0308 said:
I'm on ihackers 2.1.
I'm charging with N7 charger (Asus charger)
Input 100 240 V
Output 5.0 V -- 2.0 A
Model AD83501
This charger charge Z1 in 45-60 min (from 5%-100%)
Using stock charger it needs 1,5h to do same thing.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Something doesn't quite add up there, either the asus supply is providing more than 2a (10W) or your battery isn't getting fully charged (calibration is off)
The Z1 has a 3Ah (3.8V) battery, which is at least 11.4Wh.
With 100% efficiency (no heat generated during charging and device off) you would only be able to charge the battery 87.77% in 1 hour.
It is possible at the kernal level to specify max charging current so a custom kernal may have a lower charging rate to preserve the battery, if the rom uses a stock kernal then something might be draining the battery whilst on charge (google / data sync etc)

keithwalton said:
Something doesn't quite add up there, either the asus supply is providing more than 2a (10W) or your battery isn't getting fully charged (calibration is off)
The Z1 has a 3Ah (3.8V) battery, which is at least 11.4Wh.
With 100% efficiency (no heat generated during charging and device off) you would only be able to charge the battery 87.77% in 1 hour.
It is possible at the kernal level to specify max charging current so a custom kernal may have a lower charging rate to preserve the battery, if the rom uses a stock kernal then something might be draining the battery whilst on charge (google / data sync etc)
Click to expand...
Click to collapse
Let me check that one more time.
I'll charge it tomorrow again and will check exact time.
What I wrote isn't 100% correct, it's around 60min.
But you are right - that is strange.
I never thought about that, it could be more minutes or really, it doesn't charge to 100%.
Sent from my C6903 using Tapatalk

strange..mine one took around 2 hrs 30 min to fully charge from 10-100% using stock charger....

What is the Battery Charging time with included Fast Charger for Z3+?

Hi, I bought Z3+ two days ago. Fast Charger is taking around 2 hours 15 mins to full charge the phone in switch on mode. Is it the actual time to charge it with Fast Charger?
If I connected it to PC USB Cable, the charging time is very slow. Is there is any tips improve it?
Thanks in advance

What fast charger are you using? 2:15 sounds reasonable to me though I never really stopped time on a quick charge 2.0. PC usb Ports output 500 mA, which is far less than even the stock sony charger outputs, so no there is no way to speed that up.

[email protected] said:
Hi, I bought Z3+ two days ago. Fast Charger is taking around 2 hours 15 mins to full charge the phone in switch on mode. Is it the actual time to charge it with Fast Charger?
If I connected it to PC USB Cable, the charging time is very slow. Is there is any tips improve it?
Thanks in advance
Click to expand...
Click to collapse
I use quick charger to charge my Z3+ almost every day.. The charging rate is around up 1% per minute.. Usually I turn off the phone while doing so because using quick charger makes the phone quiet hot compared to when using normal charger, and that makes the charging rate just a bit more faster..

zabi1994 said:
I use quick charger to charge my Z3+ almost every day.. The charging rate is around up 1% per minute.. Usually I turn off the phone while doing so because using quick charger makes the phone quiet hot compared to when using normal charger, and that makes the charging rate just a bit more faster..
Click to expand...
Click to collapse
Thanks for the reply, I have got Fast Charger with the phone. But it is also taking around 2 hours 30 Mins for full charge when the phone is switch on mode. That is why I asked about the charging time.

diemadedrei said:
What fast charger are you using? 2:15 sounds reasonable to me though I never really stopped time on a quick charge 2.0. PC usb Ports output 500 mA, which is far less than even the stock sony charger outputs, so no there is no way to speed that up.
Click to expand...
Click to collapse
Thanks for the reply, I am using the Fast Charger bundled with Z3+.

It did not come bundled with a fast charger here. You mean quick charge 2.0?

diemadedrei said:
It did not come bundled with a fast charger here. You mean quick charge 2.0?
Click to expand...
Click to collapse
Sorry, If "Fast Charger" is diff from "Quick Charger". I have received Quick Charger bundled with Z3+ which is taking more than 2 hours for full charge the phone.

Is it saying "quick charge 2.0" somewhere on the charger? It's a brand by Qualcomm and is faster than just a charger with high Ampere.

The point is that the charge which bundled with Z3+ just a normal charger!! ( well if you think it is)
All you need is a charger with qc2.0

Yep, although QC will wear out your battery faster.

Jackjack_lin said:
The point is that the charge which bundled with Z3+ just a normal charger!! ( well if you think it is)
All you need is a charger with qc2.0
Click to expand...
Click to collapse
But, I received a Quick Charge 2 compatible charger bundled with Z3+

[email protected] said:
But, I received a Quick Charge 2 compatible charger bundled with Z3+
Click to expand...
Click to collapse
Prics of Quick Charge 2 compatible Charger bundled with Z3+

I don't see the QC logo and quick charge 2.0 on your pic. And fast charge is not quick charge. My fast charge completed in about 2.5 hours. My quick charger does it in just over an hour. So I also got a quick charge battery booster as well. Both are by anker and I got on Amazon. Well worth it.
Sent from my E6553 using XDA-Developers mobile app

[email protected] said:
Prics of Quick Charge 2 compatible Charger bundled with Z3+
Click to expand...
Click to collapse
I think the charger is really a quick charger since it have multiple output settings.. But I have read on one of the threads here that QC2.0 does not much boost the charging time of Z3+.. Specially the dual sim variant.. Remember that sony only said that the single variant is the only one that is QC2.0 compatible..

I have encountered a problem with the charging speed of my Xperia Z3+. I have got the single SIM variant and according to the internet it should support QC 2.0. But in reality when I want to charge my device it doesn't feel like QC 2.0. For comparison I have downloaded an app called Ampere on my Z3+ and my Z3 Tablet Compact (its chipset also supports QC2.0 and it seems to work flawlessly) and it displays the current charging flow speed if I'm not wrong. I will attach two screenshots, the higher number of flow is from the tablet and the other of course from my Z3+. Anybody know what might be the problem? I have used the same charger with the same cable.

[Xperia Z2] Quick Charge 2.0 now SUPPORTED??? [23.5.A.1.291] [NO]

We all know that the Qualcomm Hardware which is in our Sony Xperia Z2 theoraticlaly support Quick Charge 2.0! However, we also know that Sony blocked this feature by simply not adding the quick charge code in our OS which is obviously Android. BUT since the new and final Marshmallow 6.0.1 Update 23.5.A.1.291 rolled for the Z2 there have been some rumors about this topic. These rumors are about potential quick charge 2.0 support for this device. Well, I did some testing using the new Quick Charger and the normal one from Sony. I bought the QC 3.0 model because it supports QC2.0 as well. Let`s find out if quick charge 2.0 indeed work on the XPERIA Z2. The charging may be different for your Z2 because I use different settings and background apps. CHECK OUT THE RESULTS AND THEN READ THE CONCLUSION! SPOILER! YOU WILL BE DISAPPOINTED :crying:
​
Device: Xperia Z2 D6503
slightly undervolted: -30mV
Android 6.0.1 build 291
used chargers:
Stock SONY charger
Ye!! 3in1 Charger (I used the 2.1A port)
Aukey Quick Charge 3.0
Aukey Quick Charge 3.0 + Jackos_QuickCharge2.0_rev5.zip
COMPARISON
-----------------------------------------------------------------------------
10 minutes charging with normal Charger by SONY (1m cable)
max: 1200mA
average: 1090mA
max battery temp: 34.5 degree celsius
percent gained: 3%
start: 30%
-----------------------------------------------------------------------------
10 minutes charging with 2.1A Tablet Charger by Ye!! (1m cable)
max:990mA
average: 970mA
max battery temp: 33.9 degree celsius
percent gained: 3%
start: 37%
-----------------------------------------------------------------------------
10 minutes charging with Quick Charge 2.0 by AUKEY (1m cable)
max: 1230mA
average: 1050mA
max battery temp: 41.3 degree celsius
percent gained: 3%
start: 25%
-----------------------------------------------------------------------------
10 minutes charging with Quick Charge 2.0 by AUKEY (1m cable) + jackos_qcboost zip
max: 1670mA
average: 1640mA
max battery temp: 40.3 degree celsius
percent gained: 6-7%
start: 40%
-----------------------------------------------------------------------------
SCREENSHOTS​↓SONY CHARGER↓ Sorry the value is that low because my charger is broken
↓Ye!! 2.1A CHARGER↓
↓QUICK CHARGE 3.0 AUKEY↓
CONCLUSION:
Well now you saw the results. What do you think? I am sorry that I have to say that but no, Quick Charge 2.0 isn`t supported in build 23.5.A.1.291! If Quick Charge 2.0 would be supported we could charge our Z2 with 2000mA = 2A instead of only ~1200mA. But you can still charge your phone faster using jackos quick charge zip which allows you to get a charging speed up to 1650mA while charging wiht a QC2.0 charger. @Jackos method works on Android Lollipop and Android Marshmallow (inlcuding all builds). The Bootloader can be LOCKED AND UNLOCKED! Check out the thread, if you are using a wuick charger it`s totally worth it! Yes, I know, we all hoped that we can now charge our phone with 2A but build 291 was officially the last one and we won`t get real Quick Charge 2.0 unless somebody builds a kernel which is based on build 291.
JACKOS QUICK CHARGE HACK FOR 1650mA CHARGING SPEED ON ANDROID MARSHMALLOW
used quick charger:
Aukey Quick Charge 3.0 Charger
https://www.amazon.de/gp/product/B01AHWOH54/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Jackos Quick Charge 2.0 flashable Zip:
THREAD: http://forum.xda-developers.com/xperia-z2/development/sony-secret-revealed-qc-2-0-t3163490
Download Link: http://forum.xda-developers.com/showpost.php?p=62713192&postcount=255
A YOUTUBE VIDEO WILL BE ADDED SOON!​

reserved
What do u think? Leave a comment and share your thoughts. Feel free to press the "THANKS" Button!

Do you feel that the battery drains faster when charging with the quick charger rather than the normal sony charger. I once bought a tronsmart quick charge 2.0 charger it also gave high mA but in returned drained the battery faster.Any help will be appreciated.

Hariskh said:
Do you feel that the battery drains faster when charging with the quick charger rather than the normal sony charger. I once bought a tronsmart quick charge 2.0 charger it also gave high mA but in returned drained the battery faster.Any help will be appreciated.
Click to expand...
Click to collapse
i can tell you that tomorrow. i got the charger today and in austria it`s 18:30 now so i have to wait a few hours for checking that

Thanks for the quick reply. I will be waiting

I will flash the "Jackos_QuickCharge2.0_rev5.zip" from the Android 5.1.1 QC 2.0 hack and test if the charging is faster

Broken cable maybe? I'm on 4.4.2 Still and get max 1500Ma from the Sony charger and cable.
Only on 4.4.2 because I only just got this phone (Demo Unit) and had to flash stock Firmware

ryanraven said:
Broken cable maybe? I'm on 4.4.2 Still and get max 1500Ma from the Sony charger and cable.
Only on 4.4.2 because I only just got this phone (Demo Unit) and had to flash stock Firmware
Click to expand...
Click to collapse
maybe. i try the 1m cable which got with the quick charger
but the comparison between quick charger and quick charger+zip is quite interesting. to be honest, when I look at these two result I don`t believe that sony provides us the quci kcharge 2.0 feature

i used QC 2.0 from 4 mouth ago when up top 6.0.1 and them working like you (using Quick Charge 2.0 by AUKEY(model PA-T2) + 1m cable + jackos_qcboost zip) 1600~1650 mAh, but i can't chaging to 2000~ mAh like thread hack qC 2.0 for 5.1.1

Charging up to 2000mA is only possible with kernel modifications.
BTW What is the purpose of this thread? This is nothing new and there is already a thread for enabling QC2.0 on Z2.
The new firmware .291 changes nothing in this regard.

Tronsmart Quick Charge 2.0 on Jackos Mod
This is what I'm getting using Tronsmart quick charge 2.0 on Rooted 291 thru usb.. Using magnetic cable it gives me 1600ma but not as stable as the usb port
It really charges faster..

By the way...I've been using Tronsmart quick charge 2.0 for Almost 1 Year and a Half now.. And still Rocks!!! Plan of getting Tronsmart 3.0 very Soon.. I'll try to compare

Jackos said:
Charging up to 2000mA is only possible with kernel modifications.
BTW What is the purpose of this thread? This is nothing new and there is already a thread for enabling QC2.0 on Z2.
The new firmware .291 changes nothing in this regard.
Click to expand...
Click to collapse
well because many people are confused right now. some say that 291 officially supports qc2.0 without your flashable zip and without the quick charge kernel for 5.1.1
this shows exactly what you mentioned. that nothing changed ^^
thats why I started this thread to compare and see if a quick charger really gets up to 2A while charging on 291 which would have shown us that qc works but even with your zip we only get around 1600mA which is good but not fully supported quick charge
and we all know that the full quick charge hack for the z2 only works on 5.1.1

abeyruma said:
By the way...I've been using Tronsmart quick charge 2.0 for Almost 1 Year and a Half now.. And still Rocks!!! Plan of getting Tronsmart 3.0 very Soon.. I'll try to compare
Click to expand...
Click to collapse
there won`t be a difference. maybe the mA value is more stable while charging but it won`t increase...

hoanghoian said:
i used QC 2.0 from 4 mouth ago when up top 6.0.1 and them working like you (using Quick Charge 2.0 by AUKEY(model PA-T2) + 1m cable + jackos_qcboost zip) 1600~1650 mAh, but i can't chaging to 2000~ mAh like thread hack qC 2.0 for 5.1.1
Click to expand...
Click to collapse
thats because quick charge 2.0 isn`t supported by build 291. too bad but thats why i started this thread to find out. for Android 6.0.1 you can only improve your charging speed by flashing jackos quick charge zip, but this only gets you up to 1650mA which is good but no real quick charge! i made this thread to show u guys that qucik charge 2.0 isn`t supported

does the battery drain faster while using quick charge 2.0 charger rather than the stock sony

Anyone know how to turn off this stupid "no full charge" thing it popped up saying phone won't fully charge to prolong battery life bla bla bla!

ryanraven said:
Anyone know how to turn off this stupid "no full charge" thing it popped up saying phone won't fully charge to prolong battery life bla bla bla!
Click to expand...
Click to collapse
go into setting then about phone then status and there will be charging optimization turn that off.

lol two people didn`t fully read my thread. those two still think that qc22.0 is supported xd

I charge my Z2 with Jackos' zip @ 1700 mA, it takes around 1 hour from 20% to 100% So how can you say QC 2.0 isn't supported? Does it have to be 2000 mA?

Better mi a1 charger?

Have anyone better and cheap charger what is supported now on oreo? i want to buy it...

Try AliExpress.com

I use a 10w iPad charger and it's great. Charges really fast

TerQQ said:
Have anyone better and cheap charger what is supported now on oreo? i want to buy it...
Click to expand...
Click to collapse
whats wrong with the stock charger?

in oreo update is fast charging feature, then i am searching charger to use that.

Sir i wanted to know which charger should i use to get fast charging after oreo update??

TerQQ said:
in oreo update is fast charging feature, then i am searching charger to use that.
Click to expand...
Click to collapse
Yogesh9694 said:
Sir i wanted to know which charger should i use to get fast charging after oreo update??
Click to expand...
Click to collapse
This has been discussed, it's not charging any faster than it did in Nougat. All they did was add the text to tell you it was fast charging, which to them means charging above 1A. True fast charging would be 50% in less than 30 minutes, definitely this update is not going to do that, no matter what charger you use.

But after oreo update there is a little improvement in charging speed... I charged my A1 in switched off and phones charged in 1hr 35 min from 0 to 100%...and i used the stock charger...

Yogesh9694 said:
But after oreo update there is a little improvement in charging speed... I charged my A1 in switched off and phones charged in 1hr 35 min from 0 to 100%...and i used the stock charger...
Click to expand...
Click to collapse
Doing some very basic math.
3000mAh battery.
Charging rate of 2000mAh
That would equate, if the battery were truly at 0%, and charged truly to 100% full 3000mAh capacity, of 90 minutes, in an ideal world. Of course, there are some things that come into play, such as overhead.
With my USB measuring tool, I am able to see the voltage around 5.10-5.20v, and the amperage around 1.85-1.94A. This is with a Qualcomm QuickCharge 3.0 charger, so I know for certain that it is not doing a higher voltage charge. I can also see that it is not doing a higher amperage charge.
Given this, I will have to see about doing a complete drain on the phone, and then charging, and seeing where 100% is indicated on the phone, in terms of capacity, as my tool can measure the amount sent over USB as well.

Charging speed

To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Redmi Note 5 Pro can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!

2 Hour With Stock Charger

I didn't completely check the ratings and time but stock charger DOES NOT fast charge this phone. as the Stock Charger isnt QC2.0 Supported. However this mobile does support QC2.0 but you'll have to test QC2.0 Charger 1st. Not all QC2.0 Chargers work on this mobile. Its a little picky. So go to a shop check QC2.0 Chargers on your mobile. when you get circle Sign on notification bar along side battery then it means that device is fast charging. if not then there will be no circle around the charging sign (Flash sign)
also idt this mobile supports QC3.0 but i dont have tools to check amps volts of charger.
Lenovo's original QC3.0 charger doesnt work on this phone. I've tested. but Motorola's QC3.0 Charger works fine.

my rn5 pro , takes apporx 3 hours to charge completely!

So far I'm a bit slow, a little bit more than 3 hours to completely charge the phone. Might have something to do with the cable.
My current charging setup:
- ANKER 5 port 40W
- a docomo USB cable
Planning to buy a proper 20AWG usb cable and a QC2.0 adapter.

I just bought a Letv charger which supported qc3.0 for about 4$ on taobao

I'm currently on the 9.5.11 build and it takes about 4-5 hours to completely charge the device using stock charger, And it took about 2-3 hours while on 9.2 build.
I wonder if the Mi QC 3.0 based charger would improve the situation for us?

piyush95 said:
I'm currently on the 9.5.11 build and it takes about 4-5 hours to completely charge the device using stock charger, And it took about 2-3 hours while on 9.2 build.
I wonder if the Mi QC 3.0 based charger would improve the situation for us?
Click to expand...
Click to collapse
Slow charge is a known bug in 9.5.11 build. Wait for an update or change ROM

13,2W for me

I recieved 9.2.13 update yesterday and have been noticing significant boost to charging speeds since then...yet to fully charge from 0 so can't comment on total time but as per Ampere, charging speeds are in range of 1500 to 1700 mah

1000 mA max with 5v 2amp and Work Normal Speed with Stock Charger
Approximately 2 hour for charge phone

I use the app Ampere (free in Playstore) to measure power input and with a normal charger (non QC) it shows up to 1600 mAh charging amount and from almost 0 to 100% it is taking 2,5 hours. One question: is there a way to tell if QuickCharge is active?

@Kusie
Look on your"s phone status bar. With normal charging there is thunder icon next to the battery. With QC active, thunder in in circle as far as I remember. Info about active QC should be also displayed in the bottom of your lockscreen
Sent from my flo using XDA Labs

Using my usb inline meter, i'm getting ~6.5v and ~2.2A, with a Tronsmart usb cable and QC 3.0 Truro charger, screen off and about 44% remaining on battery. Will try when the battery is lower some other time.

takes around 2hours to charge 100% using stock charger..

1h 30min with a Quick Charger from Anker.

Cel00 said:
1h 30min with a Quick Charger from Anker.
Click to expand...
Click to collapse
Not possible.

Incogn said:
Not possible.
Click to expand...
Click to collapse
Of Course it's true, why should I lie?
Turned off the Phone at 5% and charged it to 100%....

Cel00 said:
Of Course it's true, why should I lie?
Turned off the Phone at 5% and charged it to 100%....
Click to expand...
Click to collapse
I have no idea why would you do that... But read reviews, no matter what kind of charger you use, this phone only supports qc 2.0 version. From 0 to 100, in 1 hour, you only get like 55%, and in the end it slows down even more, so yes, impossible to fully charge in 1.5h, TECHNICALLY IMPOSSIBLE. You are either lying, or mixed times and got confused. Judging by technical parameters, the best this phone can do should be around 2hours from 0 to 100.

Incogn said:
I have no idea why would you do that... But read reviews, no matter what kind of charger you use, this phone only supports qc 2.0 version. From 0 to 100, in 1 hour, you only get like 55%, and in the end it slows down even more, so yes, impossible to fully charge in 1.5h, TECHNICALLY IMPOSSIBLE. You are either lying, or mixed times and got confused. Judging by technical parameters, the best this phone can do should be around 2hours from 0 to 100.
Click to expand...
Click to collapse
I just posted above that I was able to get QC 3.0 charging rates. Approximately 2.2A (fluctuates +/- 0.1A) and 6.6v (fluctuates +/- 0.2v) using a QC 3.0 charger and Tronsmart cable. Measured using an inline meter, not software.