Database Users

No SimCard detected after flashing Emotion R17

Hi,
i had the problem this morning that my device always tried to boot into recovery and looped int his step.
via odin i flashed twrp and MM Bootloader again and cleared the device to flash a Rom. I installed Emotion R17 and it smoothly installed only thing is my Simcard isnt detected.
And when i check the device status it also shows no imei anymore . . .
Can anyone tell me what to do now

can be closed...i'm just " dumb " and forget to load the modem
srry

This is a case of expert , please have a look because nobody solved it ....

i cant root my s7edge , the latest nougat february patch installed ? am i the only one ? i untick the auto reboot in odin and manually boot into twrp after flashing it but its stucked thereand not booting into it , it is the latest twrp hero2lte 3.1.0.
i cant even flash rom on odin or through smart switch , it fails in the modem part . when i flash without the modem then flash successfully but after flash reboot and for a minute NO COMMAND screen appears , after a minute goes into recovery and saying DM VERIFICATION FAILURE .after this when i flash the csc again , the no command prompt disappear telling NO SINGLE SKU SUPPORT and dm-verity error...., then when i reboot it , the phone boots normally but keeps on crashing the applications and force closed and sometimes reboot.
The imei is normal and signals of sim works fine. On PHONE INFO application it shows that the csc is missing . The hidden codes are not working like *#0*# , *#06# etc etc .
plz someone tell me whats the issue is ? is it a hardware or software ? will jtag resolve the issue ? i dont even know about wat is jtag , i have just heard about it . Long time passed the device price decreased in the market about 200 dollars and no solution , kept in the cupboard. I hope i can get info atleast ,i have many posts here but nobody responses . maybe i am the only one who is facing this issue .

I've had that kind of problems with other samsung phone. I had to use adb and fastboot to get recovery working.
so you still have stock recovery? have you tried factory reset?

yaro666 said:
I've had that kind of problems with other samsung phone. I had to use adb and fastboot to get recovery working.
so you still have stock recovery? have you tried factory reset?
Click to expand...
Click to collapse
yes i am on stock recovery , also tried factory reset .
tell me how did u do with fastboot ? i think fastboot works on rooted phone right ?

I'm not 100% sure, it was in bootloader mode and I don't know if s7 has the same procedure. you should start with enabli g usb debugging and unlocking bootloader.
are you sure you have exynos version?

yaro666 said:
I'm not 100% sure, it was in bootloader mode and I don't know if s7 has the same procedure. you should start with enabli g usb debugging and unlocking bootloader.
are you sure you have exynos version?
Click to expand...
Click to collapse
usb debugging is enabled , it is g935f model , on samsung smartswitch it is detected as o2u model

suhaibahmad said:
i cant root my s7edge , the latest nougat february patch installed ? am i the only one ? i untick the auto reboot in odin and manually boot into twrp after flashing it but its stucked thereand not booting into it , it is the latest twrp hero2lte 3.1.0.
i cant even flash rom on odin or through smart switch , it fails in the modem part . when i flash without the modem then flash successfully but after flash reboot and for a minute NO COMMAND screen appears , after a minute goes into recovery and saying DM VERIFICATION FAILURE .after this when i flash the csc again , the no command prompt disappear telling NO SINGLE SKU SUPPORT and dm-verity error...., then when i reboot it , the phone boots normally but keeps on crashing the applications and force closed and sometimes reboot.
The imei is normal and signals of sim works fine. On PHONE INFO application it shows that the csc is missing . The hidden codes are not working like *#0*# , *#06# etc etc .
plz someone tell me whats the issue is ? is it a hardware or software ? will jtag resolve the issue ? i dont even know about wat is jtag , i have just heard about it . Long time passed the device price decreased in the market about 200 dollars and no solution , kept in the cupboard. I hope i can get info atleast ,i have many posts here but nobody responses . maybe i am the only one who is facing this issue .
Click to expand...
Click to collapse
I flashed the firmware all back to stock then i flashed twrp in odin and you need to use the supersu beta sr3 (you need to see if it is the sr3 supersu beta), only this work in nougat. follow the steps to root like always

GuevaraJezuss said:
I flashed the firmware all back to stock then i flashed twrp in odin and you need to use the supersu beta sr3 (you need to see if it is the sr3 supersu beta), only this work in nougat. follow the steps to root like always
Click to expand...
Click to collapse
the supersu can be flashed in twrp and i cant boot into twrp ?i have tried couple of times , flash firmware through odin and then untick auto reboot and flash twrp by enabling developer oem unlock option , everything i have tried ,

Try to use superman rom. It support root inside

ledanh89 said:
Try to use superman rom. It support root inside
Click to expand...
Click to collapse
to flash superman rom , i need twrp but the main problem ia i cant boot into twrp ?

suhaibahmad said:
i cant root my s7edge , the latest nougat february patch installed ? am i the only one ? i untick the auto reboot in odin and manually boot into twrp after flashing it but its stucked thereand not booting into it , it is the latest twrp hero2lte 3.1.0.
i cant even flash rom on odin or through smart switch , it fails in the modem part . when i flash without the modem then flash successfully but after flash reboot and for a minute NO COMMAND screen appears , after a minute goes into recovery and saying DM VERIFICATION FAILURE .after this when i flash the csc again , the no command prompt disappear telling NO SINGLE SKU SUPPORT and dm-verity error...., then when i reboot it , the phone boots normally but keeps on crashing the applications and force closed and sometimes reboot.
The imei is normal and signals of sim works fine. On PHONE INFO application it shows that the csc is missing . The hidden codes are not working like *#0*# , *#06# etc etc .
plz someone tell me whats the issue is ? is it a hardware or software ? will jtag resolve the issue ? i dont even know about wat is jtag , i have just heard about it . Long time passed the device price decreased in the market about 200 dollars and no solution , kept in the cupboard. I hope i can get info atleast ,i have many posts here but nobody responses . maybe i am the only one who is facing this issue .
Click to expand...
Click to collapse
anybody got the same issue , plz ?

Huawei bricked

today i want to share my sad story with u guys , i got my phone huawe mla-al10 , i flash custom rom lineage os 13.1 from xda for huawei can-11 then it got bootloop , before this i succesfully install it without bootloop , so i decide to reset , then i go to the recovery , idk how my recovery become the stock one ,then i click format data , suddenly its stuck at 61% then keep reboot , i open fastboot then get frp locked , im start panic , then i do a research how to get rid frp locked , they said relock the bootloader , then i relock booatlader , haa its getting more worse , now icant even go to fastboot or update mood , its only goes to factory reset lowlevel.... then screen becomes black with blue led , i connect to pc , i found hs-usb diagnostic 9006 ( com 3 ) thats mean i can unbrick only with 1 way , with Snapdragoon flashtool , but i cant find nowhere for the firmware that make to unbrick using flashtool for my devices , hmmm im so sad right now , is there any way i can make my own flashtool file for snapdragon flashtool ? i hope i can fix this as soon as possible

If ADB is working,just flash your original (firmware) RECOVERY,BOOT and SYSTEM.img from the update.app zip file...after flashing those 3 img file,just reboot via adb...fastboot reboot
Phone should be like new

virusdunil said:
If ADB is working,just flash your original (firmware) RECOVERY,BOOT and SYSTEM.img from the update.app zip file...after flashing those 3 img file,just reboot via adb...fastboot reboot
Phone should be like new
Click to expand...
Click to collapse
to make adb working i need to enable usb debugging bla4 but my phone is totally dead , no fastboot nothing i can do except go to edl modee

shazlieyazizan1 said:
to make adb working i need to enable usb debugging bla4 but my phone is totally dead , no fastboot nothing i can do except go to edl modee
Click to expand...
Click to collapse
same problem adb is also not working did you find any solution?
I am having a problem i didnt do anything with my phone its huawei nova plus just 1 or 2 day ago open the boxed and try to update it using firmware finder app after downloading the full ota phone automatically restart and stuck on installing update 5% and its still on boot loop am not able to flash any firmware using sd card or update.app just because it always failed on 5 % even though am not able to wipe factory/reset it also failing. Can you guys please help me? to solve the problem?

abuapka said:
same problem adb is also not working did you find any solution?
I am having a problem i didnt do anything with my phone its huawei nova plus just 1 or 2 day ago open the boxed and try to update it using firmware finder app after downloading the full ota phone automatically restart and stuck on installing update 5% and its still on boot loop am not able to flash any firmware using sd card or update.app just because it always failed on 5 % even though am not able to wipe factory/reset it also failing. Can you guys please help me? to solve the problem?
Click to expand...
Click to collapse
try get correct model from huawei updater finder ..
if dload method not work then try to go to fastboot mode by tgis way >> Turn off your mobile and just click and hold on DOWN vol then connect it with usb it should work !

My Xiaomi Redmi 7A Can't Boot After TWRP Install

Hello , i wanted to use some root apps so , i did what everyone does , unlocked the bootloader , then install twrp recovery , but after doing that , my phone can't boot , even to go to fastboot , its stuck on redmi by xiaomi page , i know i did a fault , can you help me , btw i know the phone is 80% will not work anymore , thanks , btw my phone is Xiaomi Redmi 7A 32/2

MTahaL said:
Hello , i wanted to use some root apps so , i did what everyone does , unlocked the bootloader , then install twrp recovery , but after doing that , my phone can't boot , even to go to fastboot , its stuck on redmi by xiaomi page , i know i did a fault , can you help me , btw i know the phone is 80% will not work anymore , thanks , btw my phone is Xiaomi Redmi 7A 32/2
Click to expand...
Click to collapse
You need flash vbmeta img.
Download from gsi rom .

Maybe MiFlashPro tool can fix your Phone. It has more options than standard MiFlash and even works on phones with locked bootloader.

Finally i found the solution !!!
the solution is keep pressing power button a lot till the phone completly shut down then boot to the bootloader flash the miui official rom then the phone is , working , but if i want to root how to do it ? it's easy just follow me :
1. flash miui 10.2.5 globale rom on your phone
2. install magisk
3. then install a custom rom because the miui with root sometimes it stucks on second reboot after system setup
4. flash magisk using twrp
your done , now you have root on your xiaomi redmi 7a phone ! have a great day , if someone interested on how to do this steps with more description , just reply and ill help you , have a great day !!

MTahaL said:
Finally i found the solution !!!
the solution is keep pressing power button a lot till the phone completly shut down then boot to the bootloader flash the miui official rom then the phone is , working , but if i want to root how to do it ? it's easy just follow me :
1. flash miui 10.2.5 globale rom on your phone
2. install magisk
3. then install a custom rom because the miui with root sometimes it stucks on second reboot after system setup
4. flash magisk using twrp
your done , now you have root on your xiaomi redmi 7a phone ! have a great day , if someone interested on how to do this steps with more description , just reply and ill help you , have a great day !!
Click to expand...
Click to collapse
My case is similar with yours. After install twrp, redmi reboot and stucks by xiaomi page. I can only go to fastboot mode or xiaomi recovery mode. However, my computer still can't connect with my phone.
After shut down the phone, can you tell me step by step how to boot to bootloader mode? Thanks!

Please Help - Bricked - Stuck at Recovery - Big Problem - LeRee Le 3 C106 - LeEco Coolpad Cool1

Hello. While i tried flash twrp for newest ver and after reboot then cant go in again more to twrp.
I tried already thro MiFlash but PC doesnt recognize qualcom device, i have only "Coolpad Android Bootloader Interface" in device manager.
I also tried flash previous twrp CUOCO92 thro Windows CMD but i got error "unknown command".
I also tried with QFIL and QGDP/YGDP witch cpb file from here
and also doesnt work.
I also tried with Coolpad Download Assistant with this tutorial
https://forum.xda-developers.com/t/...-to-android-9-from-jui-or-nougat-rom.3954064/
but also doesn work, frozen at room upgrading for at least 1 hour and more, after that disconnected cable phone.
This phone is LeRee Le 3 C106
Please help me to recover my brick ;/
EDIT: FIXED!!!

miki666643 said:
Hello. While i tried flash twrp for newest ver and after reboot then cant go in again more to twrp.
I tried already thro MiFlash but PC doesnt recognize qualcom device, i have only "Coolpad Android Bootloader Interface" in device manager.
I also tried flash previous twrp CUOCO92 thro Windows CMD but i got error "unknown command".
I also tried with QFIL and QGDP/YGDP witch cpb file from here
and also doesnt work.
I also tried with Coolpad Download Assistant with this tutorial
https://forum.xda-developers.com/t/...-to-android-9-from-jui-or-nougat-rom.3954064/
but also doesn work, frozen at room upgrading for at least 1 hour and more, after that disconnected cable phone.
This phone is LeRee Le 3 C106
Please help me to recover my brick ;/
EDIT: FIXED!!!
Click to expand...
Click to collapse
HI, how do you have fixed? Please explain me....

dave21272 said:
HI, how do you have fixed? Please explain me....
Click to expand...
Click to collapse
thro YGDP_Tool_V4.0.6 installed original rom
1.52 GB file on MEGA
mega.nz
1. C1回退EUI刷机包 thro YGDP
2. TWRP_3.1.0_Cuoco92 thro mi flash
3. recovery from 4pda
4. ArrowOS Android 11 from 4pda
5. gapps
4pda helped me a lot

miki666643 said:
thro YGDP_Tool_V4.0.6 installed original rom
1.52 GB file on MEGA
mega.nz
1. C1回退EUI刷机包 thro YGDP
2. TWRP_3.1.0_Cuoco92 thro mi flash
3. recovery from 4pda
4. ArrowOS Android 11 from 4pda
5. gapps
4pda helped me a lot
Click to expand...
Click to collapse
Thanks!!! I try now!!!!

Can I flash if my pc recognized Coolpad Android Bootloader Interface wirh YGDP tool?

Great!!!!!!!!!!
my coolpad is alive !!!!!!!
The password for rar MEGA is : coolpadJUI2017
first flash init.cpb
second flash rom.cpb
and your phone is turn on !!!!!!!!!!!

yea exactly

However, I have another way.
1.Shut down your phone.
2.Hold Volume+ and Volume- , but WITHOUT power.
3.Connect it to computer.
4.If your phone's LED is flashing red lights, congratulations. You're now at 9008(EDL).
5.Download "C106-TWRP-需解压使用.zip“ from https://pan.baidu.com/s/1kdgu2YUstL...rentPath=/sharelink2927266148-452227205909178 .
6.Add a rom into the unzip folder.
7.Use QFIL(Miflash Public edition is okay,if you like) to flash it.
8.It should boot up.