Related
Long story short, I need to replace my White D802 G2's digitizer assembly. I dont live in the US but I trust the ebay sellers in the US more than others. No US seller on ebay stocks a white part for the D802. I found this retailer selling digitizers for the G2. I dont know the difference between the D800, D801, D802, D803 when it comes to the digitizer/screen, and the ebay retailers generally don't have 1 part that covers the whole range of models. This retailer has a part LG G2 D800 D801 D802 D803 LS980 LCD Screen Display with Digitizer Black ..., Rev D that claims to be compatible with D802, but it's black. They also have LG G2 D800 D801 D803 LS980 VS980 LCD Screen Display with Digitizer White..., Rev 1.0, compatible with all the models except D802? Should I take a chance on the white one that doesn't list the D802 or should i just stick a black screen on my phone? Note the Rev D and Rev 1. Also, OEM part would be nice, don't know if the above would be, they don't state.
Thanks
I also am in the process of replacing my glass and digitizer but I'm thinking about just getting the lcd with it as well. Is ebay the cheapest route?
---------- Post added at 11:54 PM ---------- Previous post was at 11:51 PM ----------
http://www.etradesupply.com/lg/android-models/lg-g2-d800.html
Has em for 83.21. That's cheaper than your links.
DustinKimble said:
I also am in the process of replacing my glass and digitizer but I'm thinking about just getting the lcd with it as well. Is ebay the cheapest route?
---------- Post added at 11:54 PM ---------- Previous post was at 11:51 PM ----------
http://www.etradesupply.com/lg/android-models/lg-g2-d800.html
Has em for 83.21. That's cheaper than your links.
Click to expand...
Click to collapse
The parts above are digitizer/LCD assemblies. The digitizer and LCD are fused together and it is extremely delicate work to detach them, if even possible. This is also the cheapest i found so far.
fiaskow said:
The parts above are digitizer/LCD assemblies. The digitizer and LCD are fused together and it is extremely delicate work to detach them, if even possible. This is also the cheapest i found so far.
Click to expand...
Click to collapse
Ok. They do have just the glass and digitizer (together or just the glass) listed for slightly cheaper. It's removable with some coaxing from a heat gun and guitar picks, but I would have to purchase some OCA and an inferred lamp (no way would I use double sided tape) so with all that it's gonna negate me trying to do it myself. My frame is a little dented from the fall, but not so bad it has to be replaced. Have you found anything out about the hardware revisions? I've read that the newest d820 have larger speaker/mic holes, maybe the screens have been changed/improved recently?
DustinKimble said:
Ok. They do have just the glass and digitizer (together or just the glass) listed for slightly cheaper. It's removable with some coaxing from a heat gun and guitar picks, but I would have to purchase some OCA and an inferred lamp (no way would I use double sided tape) so with all that it's gonna negate me trying to do it myself. My frame is a little dented from the fall, but not so bad it has to be replaced. Have you found anything out about the hardware revisions? I've read that the newest d820 have larger speaker/mic holes, maybe the screens have been changed/improved recently?
Click to expand...
Click to collapse
Haven't found anything on the revisions. I've sent an enquiry to gounlock earlier this week but no response yet. It could be that speaker/hole configuration is slightly different, but that is on the rest of the casing. I suspect the screen is the same dimensions so it could come down to a electronic difference between the revisions. Do you have a D802? Your previous link to etradesupply links to D800 replacement parts.
fiaskow said:
Haven't found anything on the revisions. I've sent an enquiry to gounlock earlier this week but no response yet. It could be that speaker/hole configuration is slightly different, but that is on the rest of the casing. I suspect the screen is the same dimensions so it could come down to a electronic difference between the revisions. Do you have a D802? Your previous link to etradesupply links to D800 replacement parts.
Click to expand...
Click to collapse
I have a d800 (usa att). I was referring to the d820 (nexus 5) speaker holes
http://bgr.com/2013/12/13/google-nexus-5-hardware-issues/
The 800 and 802 should be the same screen wise, or at least I hope, but that's what I'm looking to find out. It may be cheaper to buy the international g2 screen if it's compatible. (Literally just bought the broken phone hours ago so I'm still trying to explore all my options)
---------- Post added at 05:56 AM ---------- Previous post was at 05:36 AM ----------
I cant find anything from lg with hardware revisions, and the only people mentioning it are like 2 sites. The rest of the sites selling screens sell either a white or a black one for all models. I hope someone else can chime in here and say something, in not, I'm just gonna risk it and buy one monday. I still plan on taking a Dremel to those speaker holes in the bottom though....
DustinKimble said:
I have a d800 (usa att). I was referring to the d820 (nexus 5) speaker holes
http://bgr.com/2013/12/13/google-nexus-5-hardware-issues/
The 800 and 802 should be the same screen wise, or at least I hope, but that's what I'm looking to find out. It may be cheaper to buy the international g2 screen if it's compatible. (Literally just bought the broken phone hours ago so I'm still trying to explore all my options)
Click to expand...
Click to collapse
Ahh, my bad. I think you'll be fine with either of the assemblies (rev 1 or D). I on the other hand don't know if the Rev 1 will work on the D802.
fiaskow said:
Ahh, my bad. I think you'll be fine with either of the assemblies (rev 1 or D). I on the other hand don't know if the Rev 1 will work on the D802.
Click to expand...
Click to collapse
Well let us know what you find out. Send an email to lg and see if they can send you an answer.
I also was curios about why they are different, it seems that the LCD is the same on both models but the connector from the top of the digitizer is different.
Some sellers on ebay sell the same product for US and International variants so be careful when you order.
Sorry to re open the discussion here, but I am on a similar dilemma and would be helpful to know which models have compatible Displays. I have a D800, but I am currently in Argentina, and the model here is the D806. I cant get the D800 spare part, so I looks like I will have to try with the D806 Display.
If anyone can shed some light on the difference, will appreciate.
I broke my D802 digitizer a while back and ended up ordering a whole new LCD/Digitizer set labelled "ePartSolution-OEM LG G2 D801 D802 LCD Display Touch Digitizer Screen Assembly Black Replacement Part" on Amazon (sorry, n00b so not allowed to post links). Now that it finally arrived, it seems that they sent me the wrong part - the top digitizer ribbon-cable's connector is larger than the socket on the flex cable board.
Does anyone know if it's possible to just replace the ribbon-cable part, eg with lg-g2-d800-charging-port-flex-cable-ribbon-with-earphone-jack per etradesupply.com rather than going through the hassle of getting a different screen all over again?
Thanks.
Had exactly same problem...
Anyone can say if we can just replace the ribbon?
ThatDeadDude said:
I broke my D802 digitizer a while back and ended up ordering a whole new LCD/Digitizer set labelled "ePartSolution-OEM LG G2 D801 D802 LCD Display Touch Digitizer Screen Assembly Black Replacement Part" on Amazon (sorry, n00b so not allowed to post links). Now that it finally arrived, it seems that they sent me the wrong part - the top digitizer ribbon-cable's connector is larger than the socket on the flex cable board.
Does anyone know if it's possible to just replace the ribbon-cable part, eg with lg-g2-d800-charging-port-flex-cable-ribbon-with-earphone-jack per etradesupply.com rather than going through the hassle of getting a different screen all over again?
Thanks.
Click to expand...
Click to collapse
Same thing just happened to me... *sigh*
Did either of you come up with a solution with the D800 screen replacement on your D802?
Or did you bite the bullet and order a D802 screen just because of that one connector?
pastry said:
Same thing just happened to me... *sigh*
Did either of you come up with a solution with the D800 screen replacement on your D802?
Or did you bite the bullet and order a D802 screen just because of that one connector?
Click to expand...
Click to collapse
I am in the situation that I have installed the D800 screen over an D802 hardware. I could not see the different size of the connectors, because it was not. But after installation the touch is not all the time responsive, and Drop Down menu is not working.
Have anyone tried to change that ribbon-cable part? Is working after that?
THX
nec11 said:
I am in the situation that I have installed the D800 screen over an D802 hardware. I could not see the different size of the connectors, because it was not. But after installation the touch is not all the time responsive, and Drop Down menu is not working.
Have anyone tried to change that ribbon-cable part? Is working after that?
THX
Click to expand...
Click to collapse
I'm also using the D800 screen on D802 device, but my top ribbon connector did not fit.
The screen displays everything fine with only the bottom connectors, and there is SOME touch input.
But because the top connector isn't in, touch input is not reliable. (With "Show touch" enabled in developer settings it shows the white touch area jumping all over the screen when I try to touch)
I'm currently only able to use the device with an OTG cable and a small USB wireless touchpad/keyboard.
with OTG & Mouse mine works too, but I intent to do not use it like that.
Is strange because before starting to replace the screen I compared the old connectors with the new ones and they ware matching. I was really surprised by the end when I realize that is not working. What should be different?
My screen replacement was 90 Euro, so I would spend another 30 for that Ribbon Cable Part if I would know that is the solution.
nec11 said:
I am in the situation that I have installed the D800 screen over an D802 hardware. I could not see the different size of the connectors, because it was not. But after installation the touch is not all the time responsive, and Drop Down menu is not working.
Have anyone tried to change that ribbon-cable part? Is working after that?
THX
Click to expand...
Click to collapse
nec11 said:
with OTG & Mouse mine works too, but I intent to do not use it like that.
Is strange because before starting to replace the screen I compared the old connectors with the new ones and they ware matching. I was really surprised by the end when I realize that is not working. What should be different?
My screen replacement was 90 Euro, so I would spend another 30 for that Ribbon Cable Part if I would know that is the solution.
Click to expand...
Click to collapse
I wish I knew a solution too for the connector too, if theres is one...
Else maybe just bear with this way of interacting with the device and post a local online ad, to buy someone's bricked/non-functional D802 for cheap as long as the screen is intact. Then harvest it
This is what i'm doing, still just waiting.
Guys i have the same problem but i maybe found an solution.
The deal is the DOCK USB JACK flex cable. If you can notice on the pictures
the up side on the digitizer connector are to small on the D802 variant otherwise the
LS980 varian have the ''big'' up digitizer connector.
Now i have an issue on this flex cable of my LS980 and need an new one.
The thing here are that i also have an broken glass and the replacement for the D802 variant.
I sent the questions to a couple of Chinese sellers on ebay and lets see if
anyone have the knowledge to answer this question.
I will post any news...
henrique.h12 said:
Guys i have the same problem but i maybe found an solution.
The deal is the DOCK USB JACK flex cable. If you can notice on the pictures
the up side on the digitizer connector are to small on the D802 variant otherwise the
LS980 varian have the ''big'' up digitizer connector.
Now i have an issue on this flex cable of my LS980 and need an new one.
The thing here are that i also have an broken glass and the replacement for the D802 variant.
I sent the questions to a couple of Chinese sellers on ebay and lets see if
anyone have the knowledge to answer this question.
I will post any news...
Click to expand...
Click to collapse
good night, it worked using the flex cable LG G2 G2 LG D800 in D802/805?? I'm from Brazil and I'm having the same problem, I buy the flex cable LG G2 D800, but need to know if it works. thank you
ThatDeadDude said:
I broke my D802 digitizer a while back and ended up ordering a whole new LCD/Digitizer set labelled "ePartSolution-OEM LG G2 D801 D802 LCD Display Touch Digitizer Screen Assembly Black Replacement Part" on Amazon (sorry, n00b so not allowed to post links). Now that it finally arrived, it seems that they sent me the wrong part - the top digitizer ribbon-cable's connector is larger than the socket on the flex cable board.
Does anyone know if it's possible to just replace the ribbon-cable part, eg with lg-g2-d800-charging-port-flex-cable-ribbon-with-earphone-jack per etradesupply.com rather than going through the hassle of getting a different screen all over again?
Thanks.
Click to expand...
Click to collapse
Hi, I ordered a replacement lcd with touch inc. frame but my top touch/screen connector is too small for my board.
Sounds like I have what you need and you what I need. I'm in UK, if you are also and still have your replacement, swap?
Hi guys, any update about this?
Thanks !
Hello,
Any news about just replacing the flex cable ?
Thanks.
It seems that the longer flex connectors (for the digitizers) are for the LG G2 versions VS980 and LS980 which are Verizon and Sprint phones. Now remains the question if the main flex (like this http://www.ebay.com/itm/USB-Chargin...or-LG-VS980-/311384590958?hash=item487ff7ca6e )is changed will it work to place touch for VS980 in D802 phone?
I bought a D800 flex cable with a d800 screen and replaced my broken d802screen+usb flex cable.
The phone doesnt work properly after replacing those parts :/ It charges very slow ( 20% in 1 hour)
The Touchscreen doesnt really work, its just some random input when i touch it, you cant use the screen like this at all.
I guess theyre just not compatible...or perhaps my replacement screen is broken?
Lets assume its compatible, why would they go through the effort of making different screen/flex cables connector?
ThatDeadDude said:
I broke my D802 digitizer a while back and ended up ordering a whole new LC
Thanks.
Click to expand...
Click to collapse
Hi, For all of you still in confusion lg g2 has 2 kinds of displays with different pins. d802 and D805 have different pins than every other g2. so if u have any other G2 (variszon att&t t mobile of korean) dont buy display for D802 and D805.
Hope it helps
I have LS980 and I also bought LCD for D802 by mistake. Next I bouhght the flex cable for D802 (with smaller connector) and put those parts in LS980. Phone is starting but display not working. So.... for those that are confused to buy flex cable... it's not working.
michal.kuchtar said:
I have LS980 and I also bought LCD for D802 by mistake. Next I bouhght the flex cable for D802 (with smaller connector) and put those parts in LS980. Phone is starting but display not working. So.... for those that are confused to buy flex cable... it's not working.
Click to expand...
Click to collapse
hey. if i understood you correctly, i'm in the reverse predicament. i have an 802 and bought the LCD with the longer connector. wanna trade?
Ran into this problem with my glass only repair for the g2.
Repaired the digitizer using LOCA got everything ready to reassemble only to find out the seller sent the wrong glass digitizer for the d802 vs the d801 I have.
Was so pissed off especially after all the screen issues I had in my formal thread.
You would think I'd confirm the flex before I began...go figure lol
Small price to pay for not confirming up front.
Moral of the story... d801's screens are not compatible with d802
I did a search and I couldn't find what I was looking for....so can I install all of the D800's internals (motherboard, battery, etc.) into an LS980 frame/housing?
chicoyam said:
I did a search and I couldn't find what I was looking for....so can I install all of the D800's internals (motherboard, battery, etc.) into an LS980 frame/housing?
Click to expand...
Click to collapse
Yes. The LS980 actually has the D800 part number for the midframe parts. I realize that if you look around, the D800/D801 and LS980/VS980 parts are usually listed separately, but for the housing/midframe, the LS980 uses the D800/D801 parts and not the VS980 parts.
Source: I have been repairing phones for 10 years and made a business out of it. I have a LS980 in the shop right now and have had several D801 and VS980 over the past couple of months. When I replace the display assembly on the LS980, I order the D800/D801 parts. The VS980 (usually cross-listed as LS980) have fitment issues. Daniel
Yeah I agree with networkdaemon, I've got all 3 and the vs980 has the vibrator motor slightly higher than the ls980 and the d800 series. The bottom charging port will fit... if you force it.
i have a VS980
networkdaemon said:
Yes. The LS980 actually has the D800 part number for the midframe parts. I realize that if you look around, the D800/D801 and LS980/VS980 parts are usually listed separately, but for the housing/midframe, the LS980 uses the D800/D801 parts and not the VS980 parts.
Source: I have been repairing phones for 10 years and made a business out of it. I have a LS980 in the shop right now and have had several D801 and VS980 over the past couple of months. When I replace the display assembly on the LS980, I order the D800/D801 parts. The VS980 (usually cross-listed as LS980) have fitment issues. Daniel
Click to expand...
Click to collapse
I need screen / lcd/ digitizer for my verizon VS980. i ordered one and the P/N was 6841L-0365A {assy} 6850L-1071A {bare} arrived , it didnt work and idk if its because my P/N ends with a "B" not an "A" Can u help me?? Pleaseeeee haha i even grounded myself with the wrist strap thing and im very careful with it. it took me all day cause i didnt wanna break it.
-Damon
Hi.
Please tell me, what is the difference between LS980/D800 and VS980 screen modules?
Sellers says VS980 is especial and not compatible with all others, including D800/LS980 etc.
Who knews what is the difference and how many types of screens for G2 exists
yogi-4 said:
Yeah I agree with networkdaemon, I've got all 3 and the vs980 has the vibrator motor slightly higher than the ls980 and the d800 series. The bottom charging port will fit... if you force it.
Click to expand...
Click to collapse
networkdaemon said:
Yes. The LS980 actually has the D800 part number for the midframe parts. I realize that if you look around, the D800/D801 and LS980/VS980 parts are usually listed separately, but for the housing/midframe, the LS980 uses the D800/D801 parts and not the VS980 parts.
Source: I have been repairing phones for 10 years and made a business out of it. I have a LS980 in the shop right now and have had several D801 and VS980 over the past couple of months. When I replace the display assembly on the LS980, I order the D800/D801 parts. The VS980 (usually cross-listed as LS980) have fitment issues. Daniel
Click to expand...
Click to collapse
I am interested to get my D800 screen replaced. I have found a good deal for a VS980 device that has a dead motherboard and want to purchase it to repair my phone. Does the VS980 screen fit the D800 ?
Your advices would be greatly appreciated. Thanks in advance!
artnau said:
I am interested to get my D800 screen replaced. I have found a good deal for a VS980 device that has a dead motherboard and want to purchase it to repair my phone. Does the VS980 screen fit the D800 ?
Your advices would be greatly appreciated. Thanks in advance!
Click to expand...
Click to collapse
Yeah if I remember correctly, I have my ls980 screen on my vs980. You just can't use any other frame with the VS980 because of the vibrator motor. Good luck and take your time!!
networkdaemon said:
Yes. The LS980 actually has the D800 part number for the midframe parts. I realize that if you look around, the D800/D801 and LS980/VS980 parts are usually listed separately, but for the housing/midframe, the LS980 uses the D800/D801 parts and not the VS980 parts.
Source: I have been repairing phones for 10 years and made a business out of it. I have a LS980 in the shop right now and have had several D801 and VS980 over the past couple of months. When I replace the display assembly on the LS980, I order the D800/D801 parts. The VS980 (usually cross-listed as LS980) have fitment issues. Daniel
Click to expand...
Click to collapse
Yep, it does have fitting issues. The vibrator is too far off to even use, the proximity sensor and a grounding support is different/missing. Mobo for LS980 is about 0.5mm too large to seat and the dock port board on bottom is slightly different, board only goes if forced and the port is off-center and not parallel to the case.
The LCD assembly will work, but the frame/chassis is incompatible.
hi i wanted to make sure if i buy LCD screen display touch digitizer with frame bezel assembly for LG G2 D800 would it be compatible with LG G2 LS980? i wonder if screens and the connectors are same and the frame would fit?
agreeta said:
hi i wanted to make sure if i buy LCD screen display touch digitizer with frame bezel assembly for LG G2 D800 would it be compatible with LG G2 LS980? i wonder if screens and the connectors are same and the frame would fit?
Click to expand...
Click to collapse
Hi ,I will buy a Full LCD with frame and digitizer d800 does it compatible on Lg g2 d801 t-mobile ??? and thanks
chicoyam said:
I did a search and I couldn't find what I was looking for....so can I install all of the D800's internals (motherboard, battery, etc.) into an LS980 frame/housing?
Click to expand...
Click to collapse
Hello, my vs980 is broked
¿what display lg g2 compatibility vs980?
tnk your response
chicoyam said:
I did a search and I couldn't find what I was looking for....so can I install all of the D800's internals (motherboard, battery, etc.) into an LS980 frame/housing?
Click to expand...
Click to collapse
Found this thread when searching for the same answer.
I just swapped the logic board from an ls980 to a d800. The ls980 had a bad screen and battery. The d800 had a bad logic board.
All of the parts are interchangeable but they are not identical. The layout of the logic board is a little different in each model(gsm vs cdma) so when you swap it, you must also keep the two ribbons/connectors that go across the battery as well as the small lower pcb(since it's all connected). Everything else can be mixed and matched.
Also, if you do not need to remove the camera or battery, then don't it. They are glued to the midframe but everything else around them can be removed and swapped so there is no need to touch them if you don't have to.
Fyi, the diy repair vids on youtube such as "LG G2 Screen Repair & Disassemble" by fixez are helpful but only use them as a rough guide and use your own judgement on where and how hard to pry and with what tool. For example, in the aforementioned vid he used an exacto knife to take the back cover off. That seemed like it would be easy to mess up. I found a better way is to take out the sim tray and use a thin piece of plastic(I used my thinnest guitar pick) to catch the edge of the back cover through the hole of the sim tray and then just simply slide it around the border. Leave the bottom for last.
Be ridiculously careful when lining all of the connectors up during reassembly since they are easy to damage and/or not be fully seated. Triple check to make sure they are all solidly connected. Take your time.
Hope this helps someone in the future. Good luck.
Need a video proof
Hi guys,
Can someone please help me? Recently I have ordered a new screen with frame for my VS980. But when it arrived I realized that internals of my VS980 doesn't fit to the frame arrived. Seller sent me frame for D800. I've tried to pull the screen out of frame but broken everything down So I throwed the broken screen with frame to the trash... After some time I realized that I should ask seller for at least partial refund b/c he sent me the screen the frame that doesn't fit.
I have told seller that frame for D800 doesn't fit for VS980 motherboard, but he wrote me that:
"In China, d800=ls980=vs980=d801, while only d802 is not the same. So that is why we need a video for confirm first please. "
Can someone who has D800 frame and VS980 motherboard film a video that they do not fit and send me the link?
Thank you!
luberello said:
Hi guys,
Can someone please help me? Recently I have ordered a new screen with frame for my VS980. But when it arrived I realized that internals of my VS980 doesn't fit to the frame arrived. Seller sent me frame for D800. I've tried to pull the screen out of frame but broken everything down So I throwed the broken screen with frame to the trash... After some time I realized that I should ask seller for at least partial refund b/c he sent me the screen the frame that doesn't fit.
I have told seller that frame for D800 doesn't fit for VS980 motherboard, but he wrote me that:
"In China, d800=ls980=vs980=d801, while only d802 is not the same. So that is why we need a video for confirm first please. "
Can someone who has D800 frame and VS980 motherboard film a video that they do not fit and send me the link?
Thank you!
Click to expand...
Click to collapse
D800 frame will not fit the VS980. I know because I just replaced the frame and screen on my LS980 and it was the D800 that fit it. I ordered from etradesupply and the listings are different parts for the VS980 and the LS980.
Sent from my LG-LS980 using Tapatalk
Qi charger for LS980
I have a LS980 and I want to get a qi charger working on it. I understand that the LS980 sprint model does not come with the receiver, so I was thinking if I could change the back cover with a one with the receiver? I found a link on amazon:
amazon.com/VS980-Verizon-Wireless-Charging-Battery/dp/B014OEU0MK/ref=sr_1_19?s=electronics&ie=UTF8&qid=1463201008&sr=1-19&keywords=lg+g2+wireless+charger+ls980
it is for the VS980, can someone please tell me if this would work on my LS980?
Thanks....
tahii said:
I have a LS980 and I want to get a qi charger working on it. I understand that the LS980 sprint model does not come with the receiver, so I was thinking if I could change the back cover with a one with the receiver? I found a link on amazon:
amazon.com/VS980-Verizon-Wireless-Charging-Battery/dp/B014OEU0MK/ref=sr_1_19?s=electronics&ie=UTF8&qid=1463201008&sr=1-19&keywords=lg+g2+wireless+charger+ls980
it is for the VS980, can someone please tell me if this would work on my LS980?
Thanks....
Click to expand...
Click to collapse
The difference is on the midframe. vs980 vibrator is to the left about 1.5mm and metal tab holding mb on bottom right is about 1mm higher. IR camera sensor is different but interchangeable. If it's just the back cover there are no differences there.
Can someone tell, is vs980 main frame compatible with d800 or others parts like back cover and back housing with lens buttons and antenas or it is vs980 only?
I see, buttons are different, so if i need to change back cover i need to change some corresponding parts? but is they fit with frame? Someone try?
Lessmore said:
Can someone tell, is vs980 main frame compatible with d800 or others parts like back cover and back housing with lens buttons and antenas or it is vs980 only?
I see, buttons are different, so if i need to change back cover i need to change some corresponding parts? but is they fit with frame? Someone try?
Click to expand...
Click to collapse
As mentioned before, VS980 frame is not identical to any other frame..
What was mentioned is that vs980 main frame is incompatible with others motherboard and second board, but nothing about buttons and back cover. I know they are different, but interesting if i could eliminate these differences and make kind of "vs800 frankenstein".
networkdaemon said:
Yes. The LS980 actually has the D800 part number for the midframe parts. I realize that if you look around, the D800/D801 and LS980/VS980 parts are usually listed separately, but for the housing/midframe, the LS980 uses the D800/D801 parts and not the VS980 parts.
Source: I have been repairing phones for 10 years and made a business out of it. I have a LS980 in the shop right now and have had several D801 and VS980 over the past couple of months. When I replace the display assembly on the LS980, I order the D800/D801 parts. The VS980 (usually cross-listed as LS980) have fitment issues. Daniel
Click to expand...
Click to collapse
My d801 motherboard is not working on the ls980 frame.
Last time it worked was when it blinked the red led 2x and then would cut off.
It's battery went dead. Now I have an ls980, swapped the motherboard but the d801 motherboard will not power on using the ls980 frame.
Swapped back the ls980 board and it works perfect.
Is there any difference between the d800/801 frame and the ls980 frame preventing the d801 motherboard from working?
Ok, my screen ended up with lines after flashing like many people have, now I don't want to end up buying a crappy knockoff screen from eBay for around $30-50, but I am thinking of buying a frame and screen from a sprint ls980 but I own a d801.
Does anyone know if I can use the frame and lcd with digitizer from a sprint phone for the LG g2 and use the guts from the d801?
Is there other options too? Need to replace screen and already got burned from a knockoff from eBay, any other options?
Ok, so Santa brought me a nice crack on my D801 G2 display and the entire portion below the crack does not respond to touch (unlike Samsungs where you can literally have a completely shattered digitizer and still have full touchscreen control).
Now, I live in Romania and my G2 is a Tmobile D801 and I found out that there are various hardware differences between LG G2 models... however on local shops or websites here they sell the International G2 D802 displays and digitizer or they are incorrectly specifying for what models of G2 the displays they sell are suitable. Many of these vendors even advertise that the display they sell is compatible with D800, D801, D802, D803, LS980, VS980... but after a bit of search I realised that this is impossible because there are some differences between the connectors of these devices. If I got this right D800, D801 and D803 have the same connector and the D802 uses a different one.
Can someone please provide me the part code for the D801 LCD/digitizer? I don't want to order the wrong part....
As a side note, this is a great device but the screen got cracked too easily after a light drop... also the digitizer started to unglue from the bezel and I imagine that this happens because my phone often overheats around the camera and volume keys... thus progressively melting the glue of the double side tape that holds the screen.