Database Users

Q:HD2 stop working lcd after crash

Hello, can somebody help me ?, One day my hd2 fall on the floor and my digitizer crash, after that phone works well i had only few cracks on the sreen, 2 months later my phone fall second time but only from low-altitude on the floor. and my lcd stop work phone only vibrate and boot sound works but the lcd is black.do you think is somethink wrong with lcd or with motherboard ??? thanks a lot

It is the LCD, it has stopped working. Your digitizer may have stopped working too but you have no way of knowing this though as the LCD is not working. You can get a replacemeant digitizer and LCD that are already connected to repaiar it with. Do a search or have a good look through the threads in the back pages here and you will find a good bit of threads on people that have done this and go to Youtube and have a search there as it is some great DIY videos on doing this on there.

my digitizer gone away in first crash i dissamble it and best place for buy is ebay ? everything here is CE china export D

Macoko said:
my digitizer gone away in first crash i dissamble it and best place for buy is ebay ? everything here is CE china export D
Click to expand...
Click to collapse
Yeah ebay will probably be the best place to get replacement components. And just a tip the Euroupean HD2 and T-Mobile HD2 replacement digitzer and LCD combos will fitt in either version of the HD2. But the T-Mobile ones do not have to me soldered to the main board and the Euroupean ones do have to be soldered. Now I do not know if the connector on the ribbon of the T-Mobile ones will be able to plug in to the Eroupean ones as i do not know if they have the resiprocating connector on the main board of the Eroupean models.

i have european version(non-us) P/N 60H00295-00P with ribbon wich need soldering digitizer so i look on ebay.but still i have care about motherboard:/

T-Macgnolia said:
Yeah ebay will probably be the best place to get replacement components. And just a tip the Euroupean HD2 and T-Mobile HD2 replacement digitzer and LCD combos will fitt in either version of the HD2. But the T-Mobile ones do not have to me soldered to the main board and the Euroupean ones do have to be soldered. Now I do not know if the connector on the ribbon of the T-Mobile ones will be able to plug in to the Eroupean ones as i do not know if they have the resiprocating connector on the main board of the Eroupean models.
Click to expand...
Click to collapse
Not true!
T-mobile touch is connected to LCD through small connector and European version HD2 touch have to be soldered to LCD, but BOTH versions of 'LCD+touch combo' are connected to M/B through connector, no soldering is needed at all!

pvii said:
Not true!
T-mobile touch is connected to LCD through small connector and European version HD2 touch have to be soldered to LCD, but BOTH versions of 'LCD+touch combo' are connected to M/B through connector, no soldering is needed at all!
Click to expand...
Click to collapse
You may just be right my friend, it does look as if they both have the connector for the Main board. The combos come with the LCD and the digitizer already together, so yes there is no need for soldering. I was under the impression it was not his way. I will do further checking into this later as I just pulled up like 10 different sites but none show a picture that is conclusive enough for me to say for sure but good catch there pvii.

T-Macgnolia said:
You may just be right my friend, it does look as if they both have the connector for the Main board. The combos come with the LCD and the digitizer already together, so yes there is no need for soldering. I was under the impression it was not his way. I will do further checking into this later as I just pulled up like 10 different sites but none show a picture that is conclusive enough for me to say for sure but good catch there pvii.
Click to expand...
Click to collapse
More of that, cable and connectors have the same size and pin nimber, seems that they are interchangeable (LCM+digitizer assembly of course). Motherboards have the same size and shape too, NAND is the only difference I could observe.

[Q] hd2 flex cable

Hello , my volume buttons have stopped working , i have opened it and seen that i need a new flex cable , my hd2 version is tmous 1024mb , on ebay i only have seen T8585 flex cable.
It will be good for my model? because i havent seen different flex for my model anywhere and i think it will be good. Just need to be sure. Sorry for my bad english

i think they use same cables but i'm not sure.just google it

Found nothing on google. Anyone can help with this. i think i will order it , because i cannot found flex for tmous.

Wait! They don't use the same flex cables, the Euro and Tmous versions have different motherboards, cases and flex cables! I work on them ALL THE TIME.

connexion2005 said:
Wait! They don't use the same flex cables, the Euro and Tmous versions have different motherboards, cases and flex cables! I work on them ALL THE TIME.
Click to expand...
Click to collapse
They USE THE SAME flexes!!! I have both Tmo and EU versions, all cables are compatible (bottom buttons, main flex cable, LCM), I've tested all of them. Yes, MoBo of TMo is a little bigger and wont fit in an EU housing, but all connectors are absolutely the same in both phones.

Anyone else please comment, because I need new flex for t-mobile version.
so flex is the same between 2 versions?
Second, anyone have any good tips on how to separate lcd and digitizer without breaking lcd?
because everytime I try to separate lcd from digitizer from touch pro2 they break!!
is the hd2 the same? glue together?

DJ_MiX said:
Second, anyone have any good tips on how to separate lcd and digitizer without breaking lcd?
because everytime I try to separate lcd from digitizer from touch pro2 they break!!
is the hd2 the same? glue together?
Click to expand...
Click to collapse
Try nearly welded together

DJ_MiX said:
Anyone else please comment, because I need new flex for t-mobile version.
so flex is the same between 2 versions?
Click to expand...
Click to collapse
OMG! He doesn't believe me!
These cables have the same contacts and more of that, the same P/N: 50H10116-01M.
I changed one broken in T-mobile model with one from EU HD2 version and it works as needed, camera, BT, WIFI, all as with the original cable.
Other alternative is to solder broken connections if you have eagle eyes
DJ_MiX said:
Second, anyone have any good tips on how to separate lcd and digitizer without breaking lcd?
because everytime I try to separate lcd from digitizer from touch pro2 they break!!
is the hd2 the same? glue together?
Click to expand...
Click to collapse
Did you heated LCM to 60*C before separating them? And YES, in EU version digitizer and LCD also are sticked together with double-sided scotch-like adhesive which looses most of it's stickiness at 60-63*C and digitizer may be separated with thin plastic sheet, I use a half of credit card (they can be very easily separated in two thin sheets).

pvii said:
They USE THE SAME flexes!!! I have both Tmo and EU versions, all cables are compatible (bottom buttons, main flex cable, LCM), I've tested all of them. Yes, MoBo of TMo is a little bigger and wont fit in an EU housing, but all connectors are absolutely the same in both phones.
Click to expand...
Click to collapse
The connectors are the same but there are two different part numbers. I always replace with the correct one so I suppose maybe they are the same size. However many times there can be small changes involved the people are not aware of. A manufacturer I deal with on these has 2 different numbers and has strict writing of which one to use with which phone. So for me, it wasn't worth using a Euro flex on a Tmous HD2 when they are similar in price.

Can you give me a link where to buy usa hd2 flex cable?

connexion2005 said:
The connectors are the same but there are two different part numbers. I always replace with the correct one so I suppose maybe they are the same size. However many times there can be small changes involved the people are not aware of. A manufacturer I deal with on these has 2 different numbers and has strict writing of which one to use with which phone. So for me, it wasn't worth using a Euro flex on a Tmous HD2 when they are similar in price.
Click to expand...
Click to collapse
You did not understand, I did not checked only connectors, I've installed in a TMo HD2 main flex from European version, works perfect, just as the original one. If You want, you can replace only "correct one" but I wrote in my post for those who can buy main flex only for EU version because of shipping limitations or for about 20$ less in price (I didn't found main flex for TMo less than 64$ and for EU version price is 42-43$).
Just for knowledge, It can be repaired if you are able to handle an soldering iron with micro-tip and have a 20x magnifying glass. It will loose it's shining look, of course, but who will see it without opening the phone

How fragile is the Flex cable for the bottom buttons? I've got a HD2 with a broken digitizer that I replaced but the bottom buttons don't work anymore and neither do the lights on it, it was working before I took it apart and I have been careful with it. Same thing happened on another HD2 I tried to fix.
Also the ribbon cable for the LCD screen is very hard to connect again because of the tight angle it bends and goes in and the tab on the connector that locks the cable doesnt seem to lock it properly and the colur looks slightly faded unless I put pressure on it which makes it work normally.
Any ideas?

the connector is pretty fragile and there is a high wire density on that small flex cable tip. I were in your situation yesterday, managed to get the buttons working after some 8 tries at reconnecting that flex cable to the motherboard. Try to insert it as deep as you can get it and try to secure it tightly.
The display connector is fairly easy to connect, i make my connections while keeping the display tilted at about 90 degrees from the mainboard.
Don't worry about that, it isn't the baddest situation you can get (try doing the same thing on a htc herald or some older querty keyboard eten's .. that's a real hell)
ontopic.. ah yes, the flex cables are 100% compatible, one of my tmous hd2's has an eu flex cable. It's working just fine. Electronically speaking.. they contain 100% same components.

pvii said:
They USE THE SAME flexes!!! I have both Tmo and EU versions, all cables are compatible (bottom buttons, main flex cable, LCM), I've tested all of them. Yes, MoBo of TMo is a little bigger and wont fit in an EU housing, but all connectors are absolutely the same in both phones.
Click to expand...
Click to collapse
Right.
LCD screens are different bu you can change them only if you change as an assembly of digitizer-lcd.
housing, chasis and mother boards are different, the rest can be exchanged.

HTC Leo screen replacement

Recently, my son dropped my HTC HD2(Europe/Greece version). The result was a broken screen. As I found out later, only the cover glass(digitizer) was broken and the LCD was OK.It even worked over the broken glass but it was dangerous to cut yourself anytime.
I looked in ebay and found a new digitizer at about $15. I also found a guide on youtube on how to open the HD2 and replace the digitizer. I followed all this steps (difficult and tricky but possible) just to find out that the ribbon cable of the old digitizer was welded(soldered) on the LCD. I found out after that, that there are 2 types of HD2. The one like mine and the (I think) T-mobile version which is with a connector.
I had no luck trying to mannually solder the ribbon cable on the LCD. I am not so good on that.
The next is to order a preassembled LCD with a digitizer. It costs about $40-$70 on ebay. It is a litle expensive, so I 'I try to keep it safe. Has anyone else experienced this situation? Are there different types of LCD as it is for the Digitizer?
Can anyone help me on making a corect decision?
Thank you

dentalan said:
Recently, my son dropped my HTC HD2(Europe/Greece version). The result was a broken screen. As I found out later, only the cover glass(digitizer) was broken and the LCD was OK.It even worked over the broken glass but it was dangerous to cut yourself anytime.
I looked in ebay and found a new digitizer at about $15. I also found a guide on youtube on how to open the HD2 and replace the digitizer. I followed all this steps (difficult and tricky but possible) just to find out that the ribbon cable of the old digitizer was welded(soldered) on the LCD. I found out after that, that there are 2 types of HD2. The one like mine and the (I think) T-mobile version which is with a connector.
I had no luck trying to mannually solder the ribbon cable on the LCD. I am not so good on that.
The next is to order a preassembled LCD with a digitizer. It costs about $40-$70 on ebay. It is a litle expensive, so I 'I try to keep it safe. Has anyone else experienced this situation? Are there different types of LCD as it is for the Digitizer?
Can anyone help me on making a corect decision?
Thank you
Click to expand...
Click to collapse
You should buy The T8585 model.
Don't worry if Tmobile is written on the screen.

concabeza said:
You should buy The T8585 model.
Don't worry if Tmobile is written on the screen.
Click to expand...
Click to collapse
OK, thanks I 'll post the results

Difference between D800 and LS980 frame?

I did a search and I couldn't find what I was looking for....so can I install all of the D800's internals (motherboard, battery, etc.) into an LS980 frame/housing?

chicoyam said:
I did a search and I couldn't find what I was looking for....so can I install all of the D800's internals (motherboard, battery, etc.) into an LS980 frame/housing?
Click to expand...
Click to collapse
Yes. The LS980 actually has the D800 part number for the midframe parts. I realize that if you look around, the D800/D801 and LS980/VS980 parts are usually listed separately, but for the housing/midframe, the LS980 uses the D800/D801 parts and not the VS980 parts.
Source: I have been repairing phones for 10 years and made a business out of it. I have a LS980 in the shop right now and have had several D801 and VS980 over the past couple of months. When I replace the display assembly on the LS980, I order the D800/D801 parts. The VS980 (usually cross-listed as LS980) have fitment issues. Daniel

Yeah I agree with networkdaemon, I've got all 3 and the vs980 has the vibrator motor slightly higher than the ls980 and the d800 series. The bottom charging port will fit... if you force it.

i have a VS980
networkdaemon said:
Yes. The LS980 actually has the D800 part number for the midframe parts. I realize that if you look around, the D800/D801 and LS980/VS980 parts are usually listed separately, but for the housing/midframe, the LS980 uses the D800/D801 parts and not the VS980 parts.
Source: I have been repairing phones for 10 years and made a business out of it. I have a LS980 in the shop right now and have had several D801 and VS980 over the past couple of months. When I replace the display assembly on the LS980, I order the D800/D801 parts. The VS980 (usually cross-listed as LS980) have fitment issues. Daniel
Click to expand...
Click to collapse
I need screen / lcd/ digitizer for my verizon VS980. i ordered one and the P/N was 6841L-0365A {assy} 6850L-1071A {bare} arrived , it didnt work and idk if its because my P/N ends with a "B" not an "A" Can u help me?? Pleaseeeee haha i even grounded myself with the wrist strap thing and im very careful with it. it took me all day cause i didnt wanna break it.
-Damon

Hi.
Please tell me, what is the difference between LS980/D800 and VS980 screen modules?
Sellers says VS980 is especial and not compatible with all others, including D800/LS980 etc.
Who knews what is the difference and how many types of screens for G2 exists

yogi-4 said:
Yeah I agree with networkdaemon, I've got all 3 and the vs980 has the vibrator motor slightly higher than the ls980 and the d800 series. The bottom charging port will fit... if you force it.
Click to expand...
Click to collapse
networkdaemon said:
Yes. The LS980 actually has the D800 part number for the midframe parts. I realize that if you look around, the D800/D801 and LS980/VS980 parts are usually listed separately, but for the housing/midframe, the LS980 uses the D800/D801 parts and not the VS980 parts.
Source: I have been repairing phones for 10 years and made a business out of it. I have a LS980 in the shop right now and have had several D801 and VS980 over the past couple of months. When I replace the display assembly on the LS980, I order the D800/D801 parts. The VS980 (usually cross-listed as LS980) have fitment issues. Daniel
Click to expand...
Click to collapse
I am interested to get my D800 screen replaced. I have found a good deal for a VS980 device that has a dead motherboard and want to purchase it to repair my phone. Does the VS980 screen fit the D800 ?
Your advices would be greatly appreciated. Thanks in advance!

artnau said:
I am interested to get my D800 screen replaced. I have found a good deal for a VS980 device that has a dead motherboard and want to purchase it to repair my phone. Does the VS980 screen fit the D800 ?
Your advices would be greatly appreciated. Thanks in advance!
Click to expand...
Click to collapse
Yeah if I remember correctly, I have my ls980 screen on my vs980. You just can't use any other frame with the VS980 because of the vibrator motor. Good luck and take your time!!

networkdaemon said:
Yes. The LS980 actually has the D800 part number for the midframe parts. I realize that if you look around, the D800/D801 and LS980/VS980 parts are usually listed separately, but for the housing/midframe, the LS980 uses the D800/D801 parts and not the VS980 parts.
Source: I have been repairing phones for 10 years and made a business out of it. I have a LS980 in the shop right now and have had several D801 and VS980 over the past couple of months. When I replace the display assembly on the LS980, I order the D800/D801 parts. The VS980 (usually cross-listed as LS980) have fitment issues. Daniel
Click to expand...
Click to collapse
Yep, it does have fitting issues. The vibrator is too far off to even use, the proximity sensor and a grounding support is different/missing. Mobo for LS980 is about 0.5mm too large to seat and the dock port board on bottom is slightly different, board only goes if forced and the port is off-center and not parallel to the case.
The LCD assembly will work, but the frame/chassis is incompatible.

hi i wanted to make sure if i buy LCD screen display touch digitizer with frame bezel assembly for LG G2 D800 would it be compatible with LG G2 LS980? i wonder if screens and the connectors are same and the frame would fit?

agreeta said:
hi i wanted to make sure if i buy LCD screen display touch digitizer with frame bezel assembly for LG G2 D800 would it be compatible with LG G2 LS980? i wonder if screens and the connectors are same and the frame would fit?
Click to expand...
Click to collapse
Hi ,I will buy a Full LCD with frame and digitizer d800 does it compatible on Lg g2 d801 t-mobile ??? and thanks

chicoyam said:
I did a search and I couldn't find what I was looking for....so can I install all of the D800's internals (motherboard, battery, etc.) into an LS980 frame/housing?
Click to expand...
Click to collapse
Hello, my vs980 is broked
¿what display lg g2 compatibility vs980?
tnk your response

chicoyam said:
I did a search and I couldn't find what I was looking for....so can I install all of the D800's internals (motherboard, battery, etc.) into an LS980 frame/housing?
Click to expand...
Click to collapse
Found this thread when searching for the same answer.
I just swapped the logic board from an ls980 to a d800. The ls980 had a bad screen and battery. The d800 had a bad logic board.
All of the parts are interchangeable but they are not identical. The layout of the logic board is a little different in each model(gsm vs cdma) so when you swap it, you must also keep the two ribbons/connectors that go across the battery as well as the small lower pcb(since it's all connected). Everything else can be mixed and matched.
Also, if you do not need to remove the camera or battery, then don't it. They are glued to the midframe but everything else around them can be removed and swapped so there is no need to touch them if you don't have to.
Fyi, the diy repair vids on youtube such as "LG G2 Screen Repair & Disassemble" by fixez are helpful but only use them as a rough guide and use your own judgement on where and how hard to pry and with what tool. For example, in the aforementioned vid he used an exacto knife to take the back cover off. That seemed like it would be easy to mess up. I found a better way is to take out the sim tray and use a thin piece of plastic(I used my thinnest guitar pick) to catch the edge of the back cover through the hole of the sim tray and then just simply slide it around the border. Leave the bottom for last.
Be ridiculously careful when lining all of the connectors up during reassembly since they are easy to damage and/or not be fully seated. Triple check to make sure they are all solidly connected. Take your time.
Hope this helps someone in the future. Good luck.

Need a video proof
Hi guys,
Can someone please help me? Recently I have ordered a new screen with frame for my VS980. But when it arrived I realized that internals of my VS980 doesn't fit to the frame arrived. Seller sent me frame for D800. I've tried to pull the screen out of frame but broken everything down So I throwed the broken screen with frame to the trash... After some time I realized that I should ask seller for at least partial refund b/c he sent me the screen the frame that doesn't fit.
I have told seller that frame for D800 doesn't fit for VS980 motherboard, but he wrote me that:
"In China, d800=ls980=vs980=d801, while only d802 is not the same. So that is why we need a video for confirm first please. "
Can someone who has D800 frame and VS980 motherboard film a video that they do not fit and send me the link?
Thank you!

luberello said:
Hi guys,
Can someone please help me? Recently I have ordered a new screen with frame for my VS980. But when it arrived I realized that internals of my VS980 doesn't fit to the frame arrived. Seller sent me frame for D800. I've tried to pull the screen out of frame but broken everything down So I throwed the broken screen with frame to the trash... After some time I realized that I should ask seller for at least partial refund b/c he sent me the screen the frame that doesn't fit.
I have told seller that frame for D800 doesn't fit for VS980 motherboard, but he wrote me that:
"In China, d800=ls980=vs980=d801, while only d802 is not the same. So that is why we need a video for confirm first please. "
Can someone who has D800 frame and VS980 motherboard film a video that they do not fit and send me the link?
Thank you!
Click to expand...
Click to collapse
D800 frame will not fit the VS980. I know because I just replaced the frame and screen on my LS980 and it was the D800 that fit it. I ordered from etradesupply and the listings are different parts for the VS980 and the LS980.
Sent from my LG-LS980 using Tapatalk

Qi charger for LS980
I have a LS980 and I want to get a qi charger working on it. I understand that the LS980 sprint model does not come with the receiver, so I was thinking if I could change the back cover with a one with the receiver? I found a link on amazon:
amazon.com/VS980-Verizon-Wireless-Charging-Battery/dp/B014OEU0MK/ref=sr_1_19?s=electronics&ie=UTF8&qid=1463201008&sr=1-19&keywords=lg+g2+wireless+charger+ls980
it is for the VS980, can someone please tell me if this would work on my LS980?
Thanks....

tahii said:
I have a LS980 and I want to get a qi charger working on it. I understand that the LS980 sprint model does not come with the receiver, so I was thinking if I could change the back cover with a one with the receiver? I found a link on amazon:
amazon.com/VS980-Verizon-Wireless-Charging-Battery/dp/B014OEU0MK/ref=sr_1_19?s=electronics&ie=UTF8&qid=1463201008&sr=1-19&keywords=lg+g2+wireless+charger+ls980
it is for the VS980, can someone please tell me if this would work on my LS980?
Thanks....
Click to expand...
Click to collapse
The difference is on the midframe. vs980 vibrator is to the left about 1.5mm and metal tab holding mb on bottom right is about 1mm higher. IR camera sensor is different but interchangeable. If it's just the back cover there are no differences there.

Can someone tell, is vs980 main frame compatible with d800 or others parts like back cover and back housing with lens buttons and antenas or it is vs980 only?
I see, buttons are different, so if i need to change back cover i need to change some corresponding parts? but is they fit with frame? Someone try?

Lessmore said:
Can someone tell, is vs980 main frame compatible with d800 or others parts like back cover and back housing with lens buttons and antenas or it is vs980 only?
I see, buttons are different, so if i need to change back cover i need to change some corresponding parts? but is they fit with frame? Someone try?
Click to expand...
Click to collapse
As mentioned before, VS980 frame is not identical to any other frame..

What was mentioned is that vs980 main frame is incompatible with others motherboard and second board, but nothing about buttons and back cover. I know they are different, but interesting if i could eliminate these differences and make kind of "vs800 frankenstein".

networkdaemon said:
Yes. The LS980 actually has the D800 part number for the midframe parts. I realize that if you look around, the D800/D801 and LS980/VS980 parts are usually listed separately, but for the housing/midframe, the LS980 uses the D800/D801 parts and not the VS980 parts.
Source: I have been repairing phones for 10 years and made a business out of it. I have a LS980 in the shop right now and have had several D801 and VS980 over the past couple of months. When I replace the display assembly on the LS980, I order the D800/D801 parts. The VS980 (usually cross-listed as LS980) have fitment issues. Daniel
Click to expand...
Click to collapse
My d801 motherboard is not working on the ls980 frame.
Last time it worked was when it blinked the red led 2x and then would cut off.
It's battery went dead. Now I have an ls980, swapped the motherboard but the d801 motherboard will not power on using the ls980 frame.
Swapped back the ls980 board and it works perfect.
Is there any difference between the d800/801 frame and the ls980 frame preventing the d801 motherboard from working?

G2 Replacement Screen - Some oddity - Mismatching parts

Hi I have a D802 that i brought a while back from Aliexpress running awesome flashed cm13 all good, then i dropped it and the front glass cracked but touchscreen was still working. After a few days the touch response got worse i put it down to maybe all the pressing on the cracked glass was causing this, so I ordered a replacement screen+frame D802.
Heres my problem one of the screen connectors is too short - doesn't fit flush to the connector on the motherboard
Please see attached photos and the last screenshot photo is i think my problem - My screen is D800 screen and my motherboard a D802
So I might order a D800 Screen and Frame, but will that work? Im thinking yes as mine is currently
Has anyone else had this? i think the screens should be compatible :-0
I did force that small connector in booted the phone but no touch response so i think thats the connector for touch.

Then you bought the wrong lcd display

Zero_Rik said:
Then you bought the wrong lcd display
Click to expand...
Click to collapse
I brought the one that corresponded to my model number D802
I was only aware after the fact when fixing the screen that my phone has a D800 screen and D802 motherboard !

u bought the wrong lcd.. the connectors varies . the lcd u bought supports only for d800 801 f320 versions

gnaneshwar.v1 said:
u bought the wrong lcd.. the connectors varies . the lcd u bought supports only for d800 801 f320 versions
Click to expand...
Click to collapse
Trust me...listen to these guys!
Been down this road before...search my G2 screen replacement thread if you want more details.
It's better to get the right one vs forcing it. You Definitely Don't Want To Break Your connectors

Guys I understand, Maybe your not getting me...... My D802 has a motherboard from a D802 and a D800 Screen !! - So i brought a D802 screen and it didnt fit
I brought the correct LCD and it didnt fit - My phone is D802 but the motherboard fits a D800 screen ? Ive been running D802 Roms on it for several months
On some roms id have to change the lcd model to JDP maybe this would yeild some answers ?
So to clarify I have a D802 and when i brought the D802 replacment screen etc the connector would not fit - So according to the last photo i posted my connector is from a D800 so im assuming my phone has a D802 insides and the connector and screen is D800.......

This is an easy fix.
Return the 802 screen your bought and buy the d800 screen.
Its the one with the longer connector which is what matches your old one