Good morning, sorry if i open a post it from nowhere, I searched for many forums but i did not find any match, i have a ze500kl with original rom that after a simple reboot has not turned on anymore, i do not charge and there is no way To be able to .access the fastboot.
I tried to use QFIL considering I see the processor driver in my pc but unfortunately I do not have the QFIL firmware for this model (ZE500KL) and unfortunately can not find it, does any of you have a copy of it?
Hi.
My Leeco le s3 x626, helio x20 is bricked with red light.
I Just work with win7, Windows 10, but don't work.
It is recognised like
Mtk usb and with mtk preloaded.
Flashtool, with download give back error or doesn't start.
I see guide for mediateck x6...
b1gb1ng said:
Hi.
My Leeco le s3 x626, helio x20 is bricked with red light.
I Just work with win7, Windows 10, but don't work.
It is recognised like
Mtk usb and with mtk preloaded.
Flashtool, with download give back error or doesn't start.
I see guide for mediateck x6...
Click to expand...
Click to collapse
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
bricked my Leeco le s3 x626
AxtExpos said:
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
Click to expand...
Click to collapse
Hi, i am new to this and i just bricked my Le s3 x626. please help me. the phone is just showing a red blinking light when i connect the usb cable to charger or pc. tahnks
I have the same problem...
leeco le x626 red light brick
AxtExpos said:
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
Click to expand...
Click to collapse
Please what is the solution i need help mine also bricked while trying to root
Hi,
i have the same problem - stuck on red light.
Its recommended to use SP Flashtool to flash Stock.
Before, installing correct VCOM drivers. I've done that successfully.
But now...
I need the Stock ROM for this LeEco Le S3 X626 WITH the scatter file (MT6797_Android_scatter) that is needed for SP Flashtool.
None of the downloadable Stock ROMs i could get contain this scatter file. These Stock ROMs are all for devices that can still access fastboot.
This brick, stuck on red light can't access fastboot anymore..........
Any help? i need this ROM with the scatter file... please!
majo334 said:
Hi,
i have the same problem - stuck on red light.
Its recommended to use SP Flashtool to flash Stock.
Before, installing correct VCOM drivers. I've done that successfully.
But now...
I need the Stock ROM for this LeEco Le S3 X626 WITH the scatter file (MT6797_Android_scatter) that is needed for SP Flashtool.
None of the downloadable Stock ROMs i could get contain this scatter file. These Stock ROMs are all for devices that can still access fastboot.
This brick, stuck on red light can't access fastboot anymore..........
Any help? i need this ROM with the scatter file... please!
Click to expand...
Click to collapse
I have the files you need.
blueasteroid said:
I have the files you need.
Click to expand...
Click to collapse
Hey, i also recently bricked my phone, it has the red light problem and i have the flash tool installed, i am looking for a rom with the scatter files or the files themselves since i can't access fastboot, could you send them over?
Here you have some.
https://www.leakite.com/2017/09/download-letv-le-s3-x622-stock-firmware-flash-file.html
https://bbs.le.com//zt/eui/le_2.html
https://mega.nz/#F!MI9w3T6L
password: !YMutE59mUDbdOs9BoYY59Q
https://www.youtube.com/watch?v=xOKFI_eFq9o
blueasteroid said:
Here you have some.
https://www.leakite.com/2017/09/download-letv-le-s3-x622-stock-firmware-flash-file.html
https://bbs.le.com//zt/eui/le_2.html
https://mega.nz/#F!MI9w3T6L
password: !YMutE59mUDbdOs9BoYY59Q
https://www.youtube.com/watch?v=xOKFI_eFq9o
Click to expand...
Click to collapse
i am panicked
so so so panicked
i tried everything i could already but it is giving me errors and the red led persists, i followed https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937 but it doesn't work at all, just gives me a lot of errors that when i google nothing turns up, when i try to flash only the preloader alone it gets me somewhat through the process but gets stuck and there pops up the same error as always, i will try your files (as i was using the ones provided in the tutorial) tomorrow and report back, thanks for posting them so quickly.
marksklava said:
i am panicked
so so so panicked
i tried everything i could already but it is giving me errors and the red led persists, i followed https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937 but it doesn't work at all, just gives me a lot of errors that when i google nothing turns up, when i try to flash only the preloader alone it gets me somewhat through the process but gets stuck and there pops up the same error as always, i will try your files (as i was using the ones provided in the tutorial) tomorrow and report back, thanks for posting them so quickly.
Click to expand...
Click to collapse
Read the last post in that thread. 2 days ago I was like you. Read carefully.
i don't know at all, but it actually sounds like u didn't have the correct files before... i hope at least! things should work out with tutorials and instructions, i mean we're not that dumb right? but if we don't have the exact matching files..........
i will also try the same procedure with the new files thanks ALOT to blueasteroid, and write my results here.......
marksklava, are u actually on a L3 x626 aswell? cause most seem to operate with a x622
majo334 said:
i don't know at all, but it actually sounds like u didn't have the correct files before... i hope at least! things should work out with tutorials and instructions, i mean we're not that dumb right? but if we don't have the exact matching files..........
i will also try the same procedure with the new files thanks ALOT to blueasteroid, and write my results here.......
marksklava, are u actually on a L3 x626 aswell? cause most seem to operate with a x622
Click to expand...
Click to collapse
i am on an x626, it has a 21 mp camera and i bought it from china, sorry for not replying for 4 days.
---------- Post added at 02:14 PM ---------- Previous post was at 01:50 PM ----------
I get errors still, i believe it is a drivers issue but i don't really know how to fix it, i have tried uninstalling the drivers and installing the ones needed but they do not work at all. What do i do now? Am i out of options? What are the drivers supposed to look and how do i install them? i installed the ones that were provided in the inf file, those give me error 10 and my phone keeps disconnecting and connecting on a different COM port, although the driver seems to be installed, can someone help? If anyone is kind enough to screenshare with me i can do that via skype, discord and teamviewer, i also found a 5 year old camera here so i can catch any errors on video with my phone in the frame now which could be useful. Thanks for reading this, please help me any way you can, every bit helps.
marksklava said:
i am on an x626, it has a 21 mp camera and i bought it from china, sorry for not replying for 4 days.
Click to expand...
Click to collapse
Don't panic, i figured out this thing yesterday with my x626, it was successful and was not too hard in the end! don't worry much about the drivers, its completely normal that u lose connection all the time, it happens to all of us with bricked LeEco. The drivers won't keep still for the procedure, its normal...... I worked with the drivers in the Unbrick LeEco folder from blueasteroid. I installed all the stuff there was, and Windows said: Preloader VCOM 10 - it still switched but this is normal!
It is necessary to have the correct files, the correct paths in SPFlashtool and it only worked (for me) with DA_PL_HIGH and the pressing of buttons on the phone (Pow and Vol- holding it all the time). There was no BROM Error anymore and it all worked out.
All i can say don't give up, i have been at this point since beginning of December and now i finally got it unbricked! as much BROM errors u get, don't lose patience, keep on doing... u will finally find the right timing by happenstanc and it will work. The part after it is not that problematic then.
Check this thread, its very active at the moment and imo very very helpful: https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937/page5
Read the last pages...
leeco s3 x626 bricked
i also have the same problem with 4gb-32gb from the first day . Bricked after "fastboot reboot" command.
I tried to repair with flash_tools.exe but without success. I also tried various drivers.
Hello.
If anyone can help me... LeEco X625, blocked on red led, not charging, not connecting on PC, just red led when connect.
NOT seen in device manager.
jonyx87 said:
Hello.
If anyone can help me... LeEco X625, blocked on red led, not charging, not connecting on PC, just red led when connect.
NOT seen in device manager.
Click to expand...
Click to collapse
Same problem with mine. I once hard bricked mine, but whenever i connect to PC it gives sound, i was able to restore the phone @Long run. Few weeks after, i went to charge the phone and the phone went off, ever since then, not charging, no signs nor sounds when connected to PC... Took it to Engineers and all they say is dat i need to change the board... I'm so sad because i used all the money in my account to get the phone. The phone is still enjoying inside my wardrobe
Please help, so i just bought this phone, the LeEco Le s3, and i bricked it while installing TWRP, now every method i have tried i got some kind of error, the SPFT method just gave me endless errors and failed to upload even when tweaking settings and even having the correct folders, feel free to ask anything and i will respond, but ask a lot, because my phone is bricked and i really need it but can't figure out how to fix it at all, for the record, the phone has a Helios X20 and is the x626 version, i can't even use fastboot on it, it doesn't recognise the device. I will edit this with every question asked and post the results, if my problem is fixed this can act as a thread for x626 users trying to fix the same problem, thanks.
Try to uninstall all drivers of your device , use USBDeview to uninstall hidden and follow this
USBDeview
http://www.nirsoft.net/utils/usb_devices_view.html
https://forum.xda-developers.com/android/help/guide-leeco-le-s3-x626-x622-unbrick-t3705542
marksklava said:
Please help, so i just bought this phone, the LeEco Le s3, and i bricked it while installing TWRP, now every method i have tried i got some kind of error, the SPFT method just gave me endless errors and failed to upload even when tweaking settings and even having the correct folders, feel free to ask anything and i will respond, but ask a lot, because my phone is bricked and i really need it but can't figure out how to fix it at all, for the record, the phone has a Helios X20 and is the x626 version, i can't even use fastboot on it, it doesn't recognise the device. I will edit this with every question asked and post the results, if my problem is fixed this can act as a thread for x626 users trying to fix the same problem, thanks, i am sorry for this frantic language, i am just really panicked.
Click to expand...
Click to collapse
you need flash it at MTK SP tools. it will unbrick it .
My LeEcho S3 X626 did the same thing, but not while installing anything. I put it on the charger overnight and now it only shows the red charging light when plugged in, it won't boot and and it won't do anything. Win 10 computer doesn't recognize it, so how can I get into it? There's no android boot screen, nothing. I've tried power and volume up volume down, there is no response at all!
Pls my letvleeco is dead it only shows a red notification light when it's plug in with d cable and my pc does not detect it and it won't boot up or display anything on d screen
Unfortunately I have flash wrong Img to my Black shark 2 Global (SKW-HO) ,Now device have no screen , hardbracked, PC recognize under Com port as HS_USB Diagnostics 9008 mode, how to get back alive please
I realy want back to life, I have another working phone in hand as will, Need Help to get backup and restore to my bracked device. can some one guid me how to backup EDL mode Flashable Rom,
thanks in advance
I'm sorry mate but unfortunately, there's no official ROM available to flash via EDL mode. Even fastboot ROM is not available. Even their Chinese forum is useless. Their dev team is trash.
batuken said:
I'm sorry mate but unfortunately, there's no official ROM available to flash via EDL mode. Even fastboot ROM is not available. Even their Chinese forum is useless. Their dev team is trash.
Click to expand...
Click to collapse
opps,
So can we make our own flashable rom from backup. i have twrp backup all partitions, I dont know how to Make loader file , if u can i have working phone in hand,
I can do Jtag opration too , but there is no pinout also , must need to open Emmc and then get isp pinout itself, it's long process and hard to disassemble device is will. :|
If you have Pro Tools,like miracle, umt , ufi you take a full firmware backup of the other Black Shark 2 and flash it in your Black Shark 2, your problem will be fixed.