Related
Hi all,
as u perhaps already know, after almost 3 years with my beloved LG 2X, I bought the LG G2 D802 32 GB last week
Now... I've installed the LG Drivers onto my Win 8.1... I've rooted the phone and installed TWRP recovery.
It's time to flash my first custom rom on the new little monster
But what rom ? I've seen that some roms are sized 1 GB while others... 200 MB ( as almost all roms of my other android' based devices ). Obvioulsy I've looking for a 4.4.2 rom. From what rom it's better to begin ? Actually, what's most stable 4.4.2 rom ?
Thx in advance
PYCON said:
Hi all,
as u perhaps already know, after almost 3 years with my beloved LG 2X, I bought the LG G2 D802 32 GB last week
Now... I've installed the LG Drivers onto my Win 8.1... I've rooted the phone and installed TWRP recovery.
It's time to flash my first custom rom on the new little monster
But what rom ? I've seen that some roms are sized 1 GB while others... 200 MB ( as almost all roms of my other android' based devices ). Obvioulsy I've looking for a 4.4.2 rom. From what rom it's better to begin ? Actually, what's most stable 4.4.2 rom ?
Thx in advance
Click to expand...
Click to collapse
It depends upon your choice either Stock or AOSP based.
Start with PA4.1 or CyanoGenMOD 11.
waleedshiekh said:
It depends upon your choice either Stock or AOSP based.
Start with PA4.1 or CyanoGenMOD 11.
Click to expand...
Click to collapse
As I can remember, for example, for my 2X... I held the stock original rom for first 4 days Then only cyanogen, paranoid, pacman, kang etc etc rom, I think all cyano's based I've always thought the cyanogen with reduced sizes rather than stock may be slim, lite and fastest than stock... My opinion, my hope.
PS If I use hot reboot or a similar app to reboot into recovery, no problem. TWRP starts, I'm able to backup the system, etc. If I use the vol - & power on button, no way to enter into TWRP
PYCON said:
As I can remember, for example, for my 2X... I held the stock original rom for first 4 days Then only cyanogen, paranoid, pacman, kang etc etc rom, I think all cyano's based
PS If I use hot reboot or a similar app to reboot into recovery, no problem. TWRP starts, I'm able to backup the system, etc. If I use the vol - & power on button, no way to enter into TWRP
Click to expand...
Click to collapse
1. Power off the phone.
2. Hold Vol Down + Power button
3. When LG logo flashes leave power button and hold it again (Don't leave volume down button)
4. You will reach to Hard Reset menu press power button twice
5. Instead of hard resetting you will be moved to TWRP/CWM.
waleedshiekh said:
1. Power off the phone.
2. Hold Vol Down + Power button
3. When LG logo flashes leave power button and hold it again (Don't leave volume down button)
4. You will reach to Hard Reset menu press power button twice
5. Instead of hard resetting you will be moved to TWRP/CWM.
Click to expand...
Click to collapse
I'll try... :fingers-crossed:
PYCON said:
Hi all,
as u perhaps already know, after almost 3 years with my beloved LG 2X, I bought the LG G2 D802 32 GB last week
Now... I've installed the LG Drivers onto my Win 8.1... I've rooted the phone and installed TWRP recovery.
It's time to flash my first custom rom on the new little monster
But what rom ? I've seen that some roms are sized 1 GB while others... 200 MB ( as almost all roms of my other android' based devices ). Obvioulsy I've looking for a 4.4.2 rom. From what rom it's better to begin ? Actually, what's most stable 4.4.2 rom ?
Thx in advance
Click to expand...
Click to collapse
PA 4.1
Nameless rom
cyanogenmod 11
slimkat (but i had an overheating issue)
First, you have to decide between AOSP exeprience or LG Android experience. I tried several AOSP ROM-s cuz KK but went always back to the modified stock ROM's. Why?
a) QuickWindow.
b) There are some LG Apps I like (QuickRemote, SplitView tec)
c) I use my G2 with my corporate exchange mail account and have never used a better email application than the LGEmail before. I can set out of office replies from the application.
d) Not a big deal but I really like the weather animation on my lockscreen.
e) I cannot live without the horizontal quick settings and became frustrated on the classical quick settings on any AOSP ROM (even if there are some 3rd party solutions).
My personal recommendation: do not play with 4.4.2 (LG) ROM-s, try CloudyFlex 1.4 - very nice and stable. As long as there is no official update from LG for open phones and no custom recovery on KK and no Xposed 2.5 I won't switch to 4.4.2.
However, everything is matter of personal taste. Try and decide yourself.
ivanferdino said:
PA 4.1
Nameless rom
cyanogenmod 11
slimkat (but i had an overheating issue)
Click to expand...
Click to collapse
I'm not able to find Paranoid Android for G2... it exists ??? Where ???
Kickoff said:
First, you have to decide between AOSP exeprience or LG Android experience. I tried several AOSP ROM-s cuz KK but went always back to the modified stock ROM's. Why?
...
Click to expand...
Click to collapse
Let me reply :
a) QuickWindow : the possibility of reduce the size of an app, like in windows OS ? Not so usefull, for my usage...
b) There are some LG Apps I like (QuickRemote, SplitView tec) : quick remote is wonderful, I've found the porting of this app for any kind of roms... I've to test it.
c) I use my G2 with my corporate exchange mail account and have never used a better email application than the LGEmail before. I can set out of office replies from the application : I use aqua mail
d) Not a big deal but I really like the weather animation on my lockscreen : not so usefull, for my usage...
e) I cannot live without the horizontal quick settings and became frustrated on the classical quick settings on any AOSP ROM (even if there are some 3rd party solutions) : ya, it's true, really nice
Thx u man
PS I've read that with stock kitkat, there's no way to make usable CWM / TWRP recovery... :-o It's true ?!
PYCON said:
Hi all,
as u perhaps already know, after almost 3 years with my beloved LG 2X, I bought the LG G2 D802 32 GB last week
Now... I've installed the LG Drivers onto my Win 8.1... I've rooted the phone and installed TWRP recovery.
It's time to flash my first custom rom on the new little monster
But what rom ? I've seen that some roms are sized 1 GB while others... 200 MB ( as almost all roms of my other android' based devices ). Obvioulsy I've looking for a 4.4.2 rom. From what rom it's better to begin ? Actually, what's most stable 4.4.2 rom ?
Thx in advance
Click to expand...
Click to collapse
PYCON said:
I'm not able to find Paranoid Android for G2... it exists ??? Where ???
Let me reply :
a) QuickWindow : the possibility of reduce the size of an app, like in windows OS ? Not so usefull, for my usage...
b) There are some LG Apps I like (QuickRemote, SplitView tec) : quick remote is wonderful, I've found the porting of this app for any kind of roms... I've to test it.
c) I use my G2 with my corporate exchange mail account and have never used a better email application than the LGEmail before. I can set out of office replies from the application : I use aqua mail
d) Not a big deal but I really like the weather animation on my lockscreen : not so usefull, for my usage...
e) I cannot live without the horizontal quick settings and became frustrated on the classical quick settings on any AOSP ROM (even if there are some 3rd party solutions) : ya, it's true, really nice
Thx u man
PS I've read that with stock kitkat, there's no way to make usable CWM / TWRP recovery... :-o It's true ?!
Click to expand...
Click to collapse
PA LINK:
http://forum.xda-developers.com/showthread.php?t=2502789
with stock KK you will lose custom recovery
Before to attempt to flash my first rom ( PA ), I've read some topics about to recover a bricked phone...
Not very nice to read 32 GB that become 16 GB
There's a guide / help / how to, in order to avoid ANY problem ? Or a guide to recover the phone with correct rom version ( I've a G2 D802 32 GB Italian ) ?
PYCON said:
Before to attempt to flash my first rom ( PA ), I've read some topics about to recover a bricked phone...
Not very nice to read 32 GB that become 16 GB
There's a guide / help / how to, in order to avoid ANY problem ? Or a guide to recover the phone with correct rom version ( I've a G2 D802 32 GB Italian ) ?
Click to expand...
Click to collapse
I've ran into these issues whilst not paying attention to what I was doing but have recovered from them all, so its pretty safe, if you want to run stock KitKat there will be custom recovery very soon probably in the next few days as well as fixes for the bugs in aosp as KitKat kernel source has been released, I'm currently running Dirty Unicorn and love it
Sent from my g2 using XDA Premium 4 mobile app
Nameless
Sent from my LG-D802 using XDA Premium 4 mobile app
Solved all, without problems. Tried paranoid, droid, liquidsmooth and other 4.4.2 roms without a problem
Miracle phone
hi hello so i wanna install CyanogenMod 11.0 | Android 4.4.4 KitKat
or lolipop 5.0 that support my S5 i dont know which one to choose from many links that i see on forums
anyone can guide me and help me
i will tell my phone info
model: Sm-900F
G900FXU1ANG7
newman2015 said:
hi hello so i wanna install CyanogenMod 11.0 | Android 4.4.4 KitKat
or lolipop 5.0 that support my S5 i dont know which one to choose from many links that i see on forums
anyone can guide me and help me
i will tell my phone info
model: Sm-900F
G900FXU1ANG7
Click to expand...
Click to collapse
Hi newman2015:
First of all, that can void you warranty since you will root and install a custom recovery on the S5 (Of course it depends on your region).
If you want a more stable and mature ROM, then go for Kitkat, some ROMS out there have great MODs like the Dragon KK CM11 rom.
On the other hand if you want to try something new and new capabilities then go for Lollipop, there are great variants out there and they are getting more stable each day, but expect issues.
I have tried several of them but the best for LP are Bliss, Dragon, CM12 from albino887 (UNNOFICIAL)... For KK i recomend Dragon ROM, Liquid Smooth and Vanir, all of them with great customization, but that's my personal suggestion.
I hope this helped.
Best! :highfive:
there r alot options i need know which one support my phone cuz if i am not wrong in need rom with G900FXU1ANG7
right? to support Sanpdragon galaxy
newman2015 said:
there r alot options i need know which one support my phone cuz if i am not wrong in need rom with G900FXU1ANG7
right? to support Sanpdragon galaxy
Click to expand...
Click to collapse
Hi newman2015:
Since you have the International variant of S5, you can flash any of those ROMs that I mentioned earlier, if you need further assistance don't hesitate to ask.
Best! :good:
i would like Dragon KK CM11 rom ,. i wanna the latest stable Rom out there not 5.0 cuz atm its not stable
would u tell me how install it so it will not **** up my phone. and is it possible there choose country:israel
so i will have hebrew option and it will support my mobile company
newman2015 said:
i would like Dragon KK CM11 rom ,. i wanna the latest stable Rom out there not 5.0 cuz atm its not stable
would u tell me how install it so it will not **** up my phone. and is it possible there choose country:israel
so i will have hebrew option and it will support my mobile company
Click to expand...
Click to collapse
Hi newman2015:
Of course. IF YOU WANT FIND A GUIDE WITH IMAGES, just google it. But the basic steps are as follow.
- Always do a backup!!, since you can lost everything (CONTACTS, FILES, PHOTOS, ETC.)
- Download a stock image in case that anything goes wrong, that way you can boot you S5 once again
- Download ODIN, that way you can boot you S5 once again and just in case
- Download your desired ROM to your PC
- Download GAPPS to your PC (remember to download KK GAPPS)
- First of all follow the guide to root and install a custom recovery (Chainfire CF-Root, don't do anything extra FOLLOW THE GUIDE and you will be safe)
- Once you have root and a custom recovery and you booted into ANDROID OS, transfer the ROM and GAPPS to your phone
- Remember to do a backup!!
- Find your APN settings in your current ROM and take note of then, back up them, etc.
- Turn off your phone and press HOME, POWER and VOLUME UP button to boot into RECOVERY
- Find the option WIPE
- Swipe to do a Factory Reset (you will start clean... )
- Once it finish, select the option BACK (DON'T SELECT FORMAT DATA OR ADVANCED WIPE)
- Select the OPTION INSTALL
- Navigate to the directory where you saved the ROM and GAPPS
- First select THE ROM FILE
- Select the OPTION ADD MORE ZIPs
- Select GAPPS file
- Swipe to begin...
- Wait a little... a little more...
- If you don't receive errors select the OPTION FLASH DALVIK and CACHE (Just to be safer)
- Select the option REBOOT
- Enjoy your new ROM
- Restore your APN settings, contacts, etc.
Hope it helps
Best!
P.D. To be honest I can't remember if the hebrew option is there, but my guess is that it is
Hi you did not tell how I get exactly rom I need for my phone
newman2015 said:
Hi you did not tell how I get exactly rom I need for my phone
Click to expand...
Click to collapse
Hi newman2015:
Just go to this thread Fusion ROM
And download the klte version.
Hope it helps
Best!
and i can write in hebrew there? i mean israel keyboard ?
which one this -->
Fusion Rom
Features KitKat 4.4.4_r2:
OR
Download Fusion 4.6 KitKat
so i downloaded
1. Fusion-v4.6-2014-11-09-klte
2. pa_gapps-stock-4.4.4-20150125-signed
and i rooted my phone.
i copy those 2 files to my SD card right
what next install >?
i did not work.. it says failed to verfie the whole file signature .
it fails to install.
and then it just logback to 4.4.2 i had
Hello Everyone
Since the G901F Model has only few Roms , thanks to @fawadshah33 we finally are able to port roms from Note 4 device ( 910F ) anyway i was trying to port this Rom : http://forum.xda-developers.com/note-4/snapdragon-dev/norma-n7-port-910g-f-t3458481 i replaced the boot.img with the stock MM of the G901F device , then flashed the rom and after used the MM auto-porter that @fawadshah33 provided and restarted the device
For a second i felt happy when i saw the boot animation then after like 5 seconds the animation stopped , the device vibrated then the screen become black and it was stuck there
I really need the help of expert devs to at least tell me this problem is from what exactly , usually if there is a problem the rom don't boot at all but this one boots for around 5 seconds then the screen turn to black and the device vibrate
i really appreciate your help guys and thank you in advance
Hedi.Karray said:
Hello Everyone
Since the G901F Model has only few Roms , thanks to @fawadshah33 we finally are able to port roms from Note 4 device ( 910F ) anyway i was trying to port this Rom : http://forum.xda-developers.com/note-4/snapdragon-dev/norma-n7-port-910g-f-t3458481 i replaced the boot.img with the stock MM of the G901F device , then flashed the rom and after used the MM auto-porter that @fawadshah33 provided and restarted the device
For a second i felt happy when i saw the boot animation then after like 5 seconds the animation stopped , the device vibrated then the screen become black and it was stuck there
I really need the help of expert devs to at least tell me this problem is from what exactly , usually if there is a problem the rom don't boot at all but this one boots for around 5 seconds then the screen turn to black and the device vibrate
i really appreciate your help guys and thank you in advance
Click to expand...
Click to collapse
So does your device still boot to download mode or odin mode?
Jaistah said:
So does your device still boot to download mode or odin mode?
Click to expand...
Click to collapse
YES the device boot normally to everything , Download Mode and even Recovery
you can't port "n7 for n4" rom for s5 using auto port, if you can then so many n7 port rom are available now, you just can auto port any "s7,n5 for n4" for s5 for now
tavatien86 said:
you can't port "n7 for n4" rom for s5 using auto port, if you can then so many n7 port rom are available now, you just can auto port any "s7,n5 for n4" for s5 for now
Click to expand...
Click to collapse
understood , so its impossible for now i should stop trying ?
and i can for sure port "s7,n5 for n4" for s5 ??
Hedi.Karray said:
understood , so its impossible for now i should stop trying ?
and i can for sure port "s7,n5 for n4" for s5 ??
Click to expand...
Click to collapse
not sure 100% for all but some rom like "dr.ketan", "noble", "s7e for n9100(china forum)" that you can using auto port now, those 3 rom i think would be the best port for now, other than that if you want note7 port rom you need a custom kernel to boot up
tavatien86 said:
not sure 100% for all but some rom like "dr.ketan", "noble", "s7e for n9100(china forum)" that you can using auto port now, those 3 rom i think would be the best port for now, other than that if you want note7 port rom you need a custom kernel to boot up
Click to expand...
Click to collapse
actually i'm now downloading the ''DR.Ketan'' rom hoping that porting will work , so thank you for confirming it , and i will look for that S7e one , and since you clearly knows a lot that i dont , can you try to explain briefly why we need another kernel for the Note 7 roms ?
Hedi.Karray said:
actually i'm now downloading the ''DR.Ketan'' rom hoping that porting will work , so thank you for confirming it , and i will look for that S7e one , and since you clearly knows a lot that i dont , can you try to explain briefly why we need another kernel for the Note 7 roms ?
Click to expand...
Click to collapse
i just like you i'm just a user not a developer so not sure about anything, since there are no developer for g901 and g906 now we can't kown exactly what wrong with port rom, i try 2 rom from 1 developer in china forum, he use 1 kernel(i see in image that is stock kernel) for both of them, the "s7e for n4" rom can auto port for our s5 but the n7 rom can't, so i'm not sure that about kernel, all i know that all the n7 rom port for "normal s5(g900)" using custom kernel
tavatien86 said:
i just like you i'm just a user not a developer so not sure about anything, since there are no developer for g901 and g906 now we can't kown exactly what wrong with port rom, i try 2 rom from 1 developer in china forum, he use 1 kernel(i see in image that is stock kernel) for both of them, the "s7e for n4" rom can auto port for our s5 but the n7 rom can't, so i'm not sure that about kernel, all i know that all the n7 rom port for "normal s5(g900)" using custom kernel
Click to expand...
Click to collapse
understood , so can you give me the links to those 2 roms that works on the G091F ? cuz i searched all the net looking for roms for that device but i didnt succeed
Hedi.Karray said:
understood , so can you give me the links to those 2 roms that works on the G091F ? cuz i searched all the net looking for roms for that device but i didnt succeed
Click to expand...
Click to collapse
i think that you should use dr.ketan for now because that rom fully english, the rom in china forum has some modify that you can't change it to english easy, but if you want to test then here you are, try some rom if you want and remember n7 port never work for now, other that aurora like v9 not work too, you can test some rom and post here what rom work so everybody can use
http://bbs.gfan.com/forum.php?mod=forumdisplay&fid=1545&page=1&filter=typeid&typeid=11661
you can try "s7e v2" by S5feng that rom can boot up, remember to using auto port too
oh and onething the developer make that auto port from the first 6.0 base so if you in higher base you need to use odin to get back the first 6.0 base of your divice
tavatien86 said:
i think that you should use dr.ketan for now because that rom fully english, the rom in china forum has some modify that you can't change it to english easy, but if you want to test then here you are, try some rom if you want and remember n7 port never work for now, other that aurora like v9 not work too, you can test some rom and post here what rom work so everybody can use
http://bbs.gfan.com/forum.php?mod=forumdisplay&fid=1545&page=1&filter=typeid&typeid=11661
you can try "s7e v2" by S5feng that rom can boot up, remember to using auto port too
oh and onething the developer make that auto port from the first 6.0 base so if you in higher base you need to use odin to get back the first 6.0 base of your divice
Click to expand...
Click to collapse
i didnt understand your last line , i'am now on Stock last rom realesed ''G901FXXU1CPF6_G901FPHN1CPF2_G901FXXU1CPH3_HOME.tar'' do i need to flash other modem and bootloader than that ?
Hedi.Karray said:
i didnt understand your last line , i'am now on Stock last rom realesed ''G901FXXU1CPF6_G901FPHN1CPF2_G901FXXU1CPH3_HOME.tar'' do i need to flash other modem and bootloader than that ?
Click to expand...
Click to collapse
it mean if you in higher base you can't use that auto port perfectly, if you read all 5 page of auto port thread you can see the guy make auto port for higher base rom said it may have some bug so if you want using auto port without any issue you need to get back the lowest 6.0 base
tavatien86 said:
it mean if you in higher base you can't use that auto port perfectly, if you read all 5 page of auto port thread you can see the guy make auto port for higher base rom said it may have some bug so if you want using auto port without any issue you need to get back the lowest 6.0 base
Click to expand...
Click to collapse
if iam on higher base the rom wont boot at all ? or it will boot with problems ?
Hedi.Karray said:
if iam on higher base the rom wont boot at all ? or it will boot with problems ?
Click to expand...
Click to collapse
i don't know, as he said the rom still can boot but he have issue with calling that he can't hear any voice, i never try in higher base before, and if you in higher base and still want to port you need to make a new auto port because the auto port in #1 using every file from lowest 6.0 base
tavatien86 said:
i don't know, as he said the rom still can boot but he have issue with calling that he can't hear any voice, i never try in higher base before, and if you in higher base and still want to port you need to make a new auto port because the auto port in #1 using every file from lowest 6.0 base
Click to expand...
Click to collapse
i just flashed DR.Ketan rom and after it flashed the MM-N4-AutoPorter-for-G906x_G901F.zip and rebooted but the device didnt want to boot , i start to see the boot animation then it restart .. so i flashed another file : Port_G901F_from_G906_K-L-S__FawadShah.zip , and with that file the device didnt reboot it continued booting to rom i waited around 10 minutes then the phone start to vibrate softly after every single 30 seconds
Conlusion : the rom didnt boot i dont know why
Hedi.Karray said:
i just flashed DR.Ketan rom and after it flashed the MM-N4-AutoPorter-for-G906x_G901F.zip and rebooted but the device didnt want to boot , i start to see the boot animation then it restart .. so i flashed another file : Port_G901F_from_G906_K-L-S__FawadShah.zip , and with that file the device didnt reboot it continued booting to rom i waited around 10 minutes then the phone start to vibrate softly after every single 30 seconds
Conlusion : the rom didnt boot i dont know why
Click to expand...
Click to collapse
well as i said if you on lastest base you must build 2 new patch if you want to port, if you use 2 patch in #1 you must on the lowest base 6.0, flash rom->port_901f...->auto porter, reboot recovery after every zip, that should work
Hello all, can u help ? What is the Best rom for battery life ? Based on s7 nougat, S8 port or other port ? Or maybe i need to revert back on MM ? What is your experience ? Thx u
Nyzoka said:
Hello all, can u help ? What is the Best rom for battery life ? Based on s7 nougat, S8 port or other port ? Or maybe i need to revert back on MM ? What is your experience ? Thx u
Click to expand...
Click to collapse
Same question. Can anybody clarify it. Please.
Batman s8 port and notoriuos kernel 1.8.1
It depends, now I´m using Superman ROM 2.6 with Notorius kernel... It´s fine, but the difference is using any Doze force app like Naptime, and disabling wakelocks with MTweaks (in my case, all except BT wakelock for the Gear S3) .
Other thing I´m testing is Ice Box, an app that emulate a folder of disabled apps, It´s pretty cool solution for apps not used every day to avoid backgroud activity, auto start, etc... working well for now
Hello friends . My all hardkeys are broken. So i need double tap to wakeup devices to control my device without having any problem..
I was using android pie which has that feature but nowadays IPL is being broadcast n i want to watch it on my TV using cast feature but there is no any pie rom available for our device which can cast. So i switched to nought so friends please tell me which nougat rom supports double tap to wakeup feature or any other Android rom which has this feature as well as cast feature
My needs double tap wakeup + cast that's all
....
Sam Ruxx said:
Hello friends . My all hardkeys are broken. So i need double tap to wakeup devices to control my device without having any problem..
I was using android pie which has that feature but nowadays IPL is being broadcast n i want to watch it on my TV using cast feature but there is no any pie rom available for our device which can cast. So i switched to nought so friends please tell me which nougat rom supports double tap to wakeup feature or any other Android rom which has this feature as well as cast feature
My needs double tap wakeup + cast that's all
....
Click to expand...
Click to collapse
Choose a ROM of your choice and flash it, get a compatible kernel for the ROM which has wake gestures (eg. Raging beast) and flash it over the ROM, use a kernel manager app to configure it with your needs.
ssaikia3 said:
Choose a ROM of your choice and flash it, get a compatible kernel for the ROM which has wake gestures (eg. Raging beast) and flash it over the ROM, use a kernel manager app to configure it with your needs.
Click to expand...
Click to collapse
I have already installed raging beast on my device... Currently I'm using rr rom of android n....... Tried to enable wakeup feature through karnal adiutor but when I restart my device it disables itself.. N without restarting it doesn't work??
Sam Ruxx said:
I have already installed raging beast on my device... Currently I'm using rr rom of android n....... Tried to enable wakeup feature through karnal adiutor but when I restart my device it disables itself.. N without restarting it doesn't work??
Click to expand...
Click to collapse
If u want using RR naugat rom then i will show u how to using double tap to wake up device follow:
1- If flash RR rom and Gapp
2- U flash The ragging beast kernel a6000
3- Dowload Tapswitch app on internet and install it. ( Rom had to rooted to using tapswitch, because RR rom rooted should U don't flash magic or super su after flash rom and gapps.....)
But every boot device then u had to turn on tapswith to turn on bouble tap to wake feature.
My Idea You should choose Pie rom because It have availabe feature that.( Any Pie rom for lenovo A6000)
Good look.
longnhong said:
If u want using RR naugat rom then i will show u how to using double tap to wake up device follow:
1- If flash RR rom and Gapp
2- U flash The ragging beast kernel a6000
3- Dowload Tapswitch app on internet and install it. ( Rom had to rooted to using tapswitch, because RR rom rooted should U don't flash magic or super su after flash rom and gapps.....)
But every boot device then u had to turn on tapswith to turn on bouble tap to wake feature.
My Idea You should choose Pie rom because It have availabe feature that.( Any Pie rom for lenovo A6000)
Good look.
Click to expand...
Click to collapse
Bro i have tried on pie rom to cast the screen but i didn't work at all that's why I had to switch to nought rom....
But if u tried casting n worked very well on pie rom please tell me the rom name