Hello Everyone
Since the G901F Model has only few Roms , thanks to @fawadshah33 we finally are able to port roms from Note 4 device ( 910F ) anyway i was trying to port this Rom : http://forum.xda-developers.com/note-4/snapdragon-dev/norma-n7-port-910g-f-t3458481 i replaced the boot.img with the stock MM of the G901F device , then flashed the rom and after used the MM auto-porter that @fawadshah33 provided and restarted the device
For a second i felt happy when i saw the boot animation then after like 5 seconds the animation stopped , the device vibrated then the screen become black and it was stuck there
I really need the help of expert devs to at least tell me this problem is from what exactly , usually if there is a problem the rom don't boot at all but this one boots for around 5 seconds then the screen turn to black and the device vibrate
i really appreciate your help guys and thank you in advance
Hedi.Karray said:
Hello Everyone
Since the G901F Model has only few Roms , thanks to @fawadshah33 we finally are able to port roms from Note 4 device ( 910F ) anyway i was trying to port this Rom : http://forum.xda-developers.com/note-4/snapdragon-dev/norma-n7-port-910g-f-t3458481 i replaced the boot.img with the stock MM of the G901F device , then flashed the rom and after used the MM auto-porter that @fawadshah33 provided and restarted the device
For a second i felt happy when i saw the boot animation then after like 5 seconds the animation stopped , the device vibrated then the screen become black and it was stuck there
I really need the help of expert devs to at least tell me this problem is from what exactly , usually if there is a problem the rom don't boot at all but this one boots for around 5 seconds then the screen turn to black and the device vibrate
i really appreciate your help guys and thank you in advance
Click to expand...
Click to collapse
So does your device still boot to download mode or odin mode?
Jaistah said:
So does your device still boot to download mode or odin mode?
Click to expand...
Click to collapse
YES the device boot normally to everything , Download Mode and even Recovery
you can't port "n7 for n4" rom for s5 using auto port, if you can then so many n7 port rom are available now, you just can auto port any "s7,n5 for n4" for s5 for now
tavatien86 said:
you can't port "n7 for n4" rom for s5 using auto port, if you can then so many n7 port rom are available now, you just can auto port any "s7,n5 for n4" for s5 for now
Click to expand...
Click to collapse
understood , so its impossible for now i should stop trying ?
and i can for sure port "s7,n5 for n4" for s5 ??
Hedi.Karray said:
understood , so its impossible for now i should stop trying ?
and i can for sure port "s7,n5 for n4" for s5 ??
Click to expand...
Click to collapse
not sure 100% for all but some rom like "dr.ketan", "noble", "s7e for n9100(china forum)" that you can using auto port now, those 3 rom i think would be the best port for now, other than that if you want note7 port rom you need a custom kernel to boot up
tavatien86 said:
not sure 100% for all but some rom like "dr.ketan", "noble", "s7e for n9100(china forum)" that you can using auto port now, those 3 rom i think would be the best port for now, other than that if you want note7 port rom you need a custom kernel to boot up
Click to expand...
Click to collapse
actually i'm now downloading the ''DR.Ketan'' rom hoping that porting will work , so thank you for confirming it , and i will look for that S7e one , and since you clearly knows a lot that i dont , can you try to explain briefly why we need another kernel for the Note 7 roms ?
Hedi.Karray said:
actually i'm now downloading the ''DR.Ketan'' rom hoping that porting will work , so thank you for confirming it , and i will look for that S7e one , and since you clearly knows a lot that i dont , can you try to explain briefly why we need another kernel for the Note 7 roms ?
Click to expand...
Click to collapse
i just like you i'm just a user not a developer so not sure about anything, since there are no developer for g901 and g906 now we can't kown exactly what wrong with port rom, i try 2 rom from 1 developer in china forum, he use 1 kernel(i see in image that is stock kernel) for both of them, the "s7e for n4" rom can auto port for our s5 but the n7 rom can't, so i'm not sure that about kernel, all i know that all the n7 rom port for "normal s5(g900)" using custom kernel
tavatien86 said:
i just like you i'm just a user not a developer so not sure about anything, since there are no developer for g901 and g906 now we can't kown exactly what wrong with port rom, i try 2 rom from 1 developer in china forum, he use 1 kernel(i see in image that is stock kernel) for both of them, the "s7e for n4" rom can auto port for our s5 but the n7 rom can't, so i'm not sure that about kernel, all i know that all the n7 rom port for "normal s5(g900)" using custom kernel
Click to expand...
Click to collapse
understood , so can you give me the links to those 2 roms that works on the G091F ? cuz i searched all the net looking for roms for that device but i didnt succeed
Hedi.Karray said:
understood , so can you give me the links to those 2 roms that works on the G091F ? cuz i searched all the net looking for roms for that device but i didnt succeed
Click to expand...
Click to collapse
i think that you should use dr.ketan for now because that rom fully english, the rom in china forum has some modify that you can't change it to english easy, but if you want to test then here you are, try some rom if you want and remember n7 port never work for now, other that aurora like v9 not work too, you can test some rom and post here what rom work so everybody can use
http://bbs.gfan.com/forum.php?mod=forumdisplay&fid=1545&page=1&filter=typeid&typeid=11661
you can try "s7e v2" by S5feng that rom can boot up, remember to using auto port too
oh and onething the developer make that auto port from the first 6.0 base so if you in higher base you need to use odin to get back the first 6.0 base of your divice
tavatien86 said:
i think that you should use dr.ketan for now because that rom fully english, the rom in china forum has some modify that you can't change it to english easy, but if you want to test then here you are, try some rom if you want and remember n7 port never work for now, other that aurora like v9 not work too, you can test some rom and post here what rom work so everybody can use
http://bbs.gfan.com/forum.php?mod=forumdisplay&fid=1545&page=1&filter=typeid&typeid=11661
you can try "s7e v2" by S5feng that rom can boot up, remember to using auto port too
oh and onething the developer make that auto port from the first 6.0 base so if you in higher base you need to use odin to get back the first 6.0 base of your divice
Click to expand...
Click to collapse
i didnt understand your last line , i'am now on Stock last rom realesed ''G901FXXU1CPF6_G901FPHN1CPF2_G901FXXU1CPH3_HOME.tar'' do i need to flash other modem and bootloader than that ?
Hedi.Karray said:
i didnt understand your last line , i'am now on Stock last rom realesed ''G901FXXU1CPF6_G901FPHN1CPF2_G901FXXU1CPH3_HOME.tar'' do i need to flash other modem and bootloader than that ?
Click to expand...
Click to collapse
it mean if you in higher base you can't use that auto port perfectly, if you read all 5 page of auto port thread you can see the guy make auto port for higher base rom said it may have some bug so if you want using auto port without any issue you need to get back the lowest 6.0 base
tavatien86 said:
it mean if you in higher base you can't use that auto port perfectly, if you read all 5 page of auto port thread you can see the guy make auto port for higher base rom said it may have some bug so if you want using auto port without any issue you need to get back the lowest 6.0 base
Click to expand...
Click to collapse
if iam on higher base the rom wont boot at all ? or it will boot with problems ?
Hedi.Karray said:
if iam on higher base the rom wont boot at all ? or it will boot with problems ?
Click to expand...
Click to collapse
i don't know, as he said the rom still can boot but he have issue with calling that he can't hear any voice, i never try in higher base before, and if you in higher base and still want to port you need to make a new auto port because the auto port in #1 using every file from lowest 6.0 base
tavatien86 said:
i don't know, as he said the rom still can boot but he have issue with calling that he can't hear any voice, i never try in higher base before, and if you in higher base and still want to port you need to make a new auto port because the auto port in #1 using every file from lowest 6.0 base
Click to expand...
Click to collapse
i just flashed DR.Ketan rom and after it flashed the MM-N4-AutoPorter-for-G906x_G901F.zip and rebooted but the device didnt want to boot , i start to see the boot animation then it restart .. so i flashed another file : Port_G901F_from_G906_K-L-S__FawadShah.zip , and with that file the device didnt reboot it continued booting to rom i waited around 10 minutes then the phone start to vibrate softly after every single 30 seconds
Conlusion : the rom didnt boot i dont know why
Hedi.Karray said:
i just flashed DR.Ketan rom and after it flashed the MM-N4-AutoPorter-for-G906x_G901F.zip and rebooted but the device didnt want to boot , i start to see the boot animation then it restart .. so i flashed another file : Port_G901F_from_G906_K-L-S__FawadShah.zip , and with that file the device didnt reboot it continued booting to rom i waited around 10 minutes then the phone start to vibrate softly after every single 30 seconds
Conlusion : the rom didnt boot i dont know why
Click to expand...
Click to collapse
well as i said if you on lastest base you must build 2 new patch if you want to port, if you use 2 patch in #1 you must on the lowest base 6.0, flash rom->port_901f...->auto porter, reboot recovery after every zip, that should work
Related
im buying the pro version today, and i want to know the compatibility of roms with this device. (diferent snapdragon cpu version)
did any1 try to flash the new device with the custom roms from the original development section?
I just wish to have miui on it
cnv17 said:
im buying the pro version today, and i want to know the compatibility of roms with this device. (diferent snapdragon cpu version)
did any1 try to flash the new device with the custom roms from the original development section?
I just wish to have miui on it
Click to expand...
Click to collapse
+1 here
u8800pro also have BCM4329 wifi solution instead of qualcomm libra one
I have one. I tryed to flash it with official rom and I bricked it. It was my fault. Now I can't recover it. Any suggestions? In every mode it vibrates and nothing happens. Purple screen doesn't work, recovery mode doesn't work, flashing mode doesn't work.
dexxxterito said:
Purple screen doesn't work.
Click to expand...
Click to collapse
without pink mode u f***ed up
dexxxterito said:
I have one. I tryed to flash it with official rom and I bricked it. It was my fault. Now I can't recover it. Any suggestions? In every mode it vibrates and nothing happens. Purple screen doesn't work, recovery mode doesn't work, flashing mode doesn't work.
Click to expand...
Click to collapse
i had bricked mine also. i live in russia but im not russian hardly i could find a tech service coz i cant speak russian. they are going to run jtag on my phone they were asking for rom or something like that. finally i have found a u8800 pro rom on xda. tomorrow i'll se what will happen. and i can share all my experince with it
edit: the guy who was going to run jtag on my phone in moscow now and he'll be back only on 11th of december.. unfortunatelly i'll wait or i'll try to contact with an official service center in other cities. the problem is i can not find any official service center even in other cities
I can access to the pink screen, but i don't have the image folder... can somebody help me?? i have a big problem if i cant fix it.. it reboots every 80 seconds with the unfinished root image file.. if someone can give me the original one for 2.3.5 pleeeeaaaseee send i to [email protected] i really need it, im having a hard time trying to fix it.. help..!
You need different ROMs compared to u8800, as some people discovered (rather painfully). So far, there are 4 ROM options. Stock ROM options include the stock 2.2, the stock 2.3 (no problems as with the 2.3 for the u8800), however they both suck performance wise.
Then there's a MIUI port which I couldn't even get to install on my device and finally comes cyanogenmod which is the best option so far and the one I'd recommend (you will see a tremendous difference in the performance of the UI).
Hi every body, i'm new on the forum so i don't really know where to put my topic so excuse me if i'm at the wrong place.
Here is my problem, i had a galaxy s2 i9100G and i used to put cyanogen on it and come back on android then cyanogen so i know a bit about flashing, root, rom stock, custom etc
Now i bought a galaxy s4 I9505 and when i decided to put cyanogen on it i used cf root for titanium backup and all the stuff, so my phone was rooted, but i noticed that on the start on the up left corner was written in red "kernel is not seandroid enforcing" and in yellow "set warranty bit: kernel ". I thought it was nothing so i continued, i wanted to test the new cyanogen mod installer so every thing worked fine and i had cyanogen. (Im sorry it's long but i prefer to explain everything from the begining).
Then when i wanted to return to android stock rom but when i start the flash with odin, 10 secondes after i click start, odin stops and don't respond, then i need to close it so the flash dont work. I searched every thing i could on internet about the knox system and every body seems to say that i can re flash a rom without problem, but i can't, i found on a forum that if i use triangle away then i can flash a rom but triangle away don't work it turn off my phone then nothing.
Please does any boby have an idea ?
Thank you in advance!
I Have I9505 with CM11
try to change the pc or the USB Cable
Also, make sure you are using one of your USB 2.0 ports when flashing.
I have an USB 3.0 on my laptop and whenever i tried to flash with the phone connected to that port, Odin would froze.
You need the right firmware for your bootloader. If you flash an older firmware than your last stock firmware was, it fails because you can not downgrade the bootloader. And triangle away doesn't work anyway on knox bootloaders. Means: if you now have knox on your phone and it's 0x1, what i think it is, there's no chance to reset it to 0x0. But you can flash the latest available firmware for your country, or, if you want, a custom ROM.
4ltair said:
Also, make sure you are using one of your USB 2.0 ports when flashing.
I have an USB 3.0 on my laptop and whenever i tried to flash with the phone connected to that port, Odin would froze.
Click to expand...
Click to collapse
I tried on my new laptop (by the way it's also a samsung) who have a USB 3.0 port with the original USB cable, i also tried on my computer with a USB 2.0 and an old USB cable and i think also the new one. but i will try again and focus on that on that point . thank you
speedwayfan75 said:
You need the right firmware for your bootloader. If you flash an older firmware than your last stock firmware was, it fails because you can not downgrade the bootloader. And triangle away doesn't work anyway on knox bootloaders. Means: if you now have knox on your phone and it's 0x1, what i think it is, there's no chance to reset it to 0x0. But you can flash the latest available firmware for your country, or, if you want, a custom ROM.
Click to expand...
Click to collapse
Thank you for your detailed answer. When i flashed cyanogen 11 i was on the last official firmware, and it's that firmware that i tried to flash via odin so i don't understand. Do i need to flash a different kernel or something like that? also for triangle away, it put a message on the start of the app that i need a official kernel (samsung) else it will bootloop or soft-brick. With cyanogen, wich kernel it is ? (i've seen on internet that CM11 works with triangle away.)
And what custom rom could advise me ? With the custom roms can have the air gesture and the stuff like that? Or do i need to be on an official firmware ?
Thank you again for your help.
kynan94 said:
Thank you for your detailed answer. When i flashed cyanogen 11 i was on the last official firmware, and it's that firmware that i tried to flash via odin so i don't understand. Do i need to flash a different kernel or something like that? also for triangle away, it put a message on the start of the app that i need a official kernel (samsung) else it will bootloop or soft-brick. With cyanogen, wich kernel it is ? (i've seen on internet that CM11 works with triangle away.)
And what custom rom could advise me ? With the custom roms can have the air gesture and the stuff like that? Or do i need to be on an official firmware ?
Thank you again for your help.
Click to expand...
Click to collapse
CM 11 is under testing. Why u don't install the CM 10 stable version: HERE?. I dont understand the people asking for solutions that have problems in ROMs that are full of bugs. What did u expect in "nightly" custom roms?
My post wasn't about cm11 rom problems it was about flashing the stock rom, not because the cyanogen one is "full of bugs" wich is not really true. So do you have an idea for my real question?
Wich custom rom would you recommand me ? Is there anyone who have the air gesture and mouvement functions?
kynan94 said:
My post wasn't about cm11 rom problems it was about flashing the stock rom, not because the cyanogen one is "full of bugs" wich is not really true. So do you have an idea for my real question?
Wich custom rom would you recommand me ? Is there anyone who have the air gesture and mouvement functions?
Click to expand...
Click to collapse
- About your first sentence in wikipedia: CyanogenMod tries to build a new, fresh "nightly" version every 24 hours for each of the devices it supports, which includes the most up-to-date changes to the source code, provided from all over the Internet. Of course, the nightly builds may also contain newly-introduced bugs, but hey- if you feel adventurous, you can help make CyanogenMod better by trying these experimental builds and reporting back bugs to the developers.
- Second sentence: Learn how use Triangle Away (more info: HERE) and flash again Stock ROM.
I know that nightly versions have some bugs but what i was trying to say is that they are not as much as you seems to say, and i like this rom and it worth one or two little bugs, any way you didn't answer my last question about custom roms, do you know some great one ?
For the video on triangle away i already searched for informations about it and it doesn't work, when i open triangle away uder current status there are the counter the binary and the device for him in the video but i have one the more : "System : modified" is it a problem ?
And also when i go si my status in the phone informations (in french) "Etat SELinux" is "Application" what does it mean ?
and is the kernel of cyanogen a stock (samsung) kernel like they say on the app ?
Any custom rom is great. Try it out for yourself which one suits you.
Lennyz1988 said:
Any custom rom is great. Try it out for yourself which one suits you.
Click to expand...
Click to collapse
Okay then
And for my problem i finally found a solution using odin mobile
In this Thread I will port the Iron Rom from the Tab S to our Note 2014
Thanks to Tkkg1994 for making the awsome Iron Rom and xluco for the Kernel
Just to be clear: I didn't developed the Iron Rom (http://forum.xda-developers.com/galaxy-tab-s/development/prerooted-stock-touchwiz-rom-t2973107) nor the xluco Kernel (http://forum.xda-developers.com/showthread.php?t=2725193. I just put them together.
Ok, first how you install the Iron Rom: Download the Iron Rom for the T800 and the xluco Kernel for SM-P600 first and put them on external SD Card. After that go into Recovery and wipe EVERYTHING exept external storage. Maby you can also wipe system only but i highly recommend yout to wipe everything. Install now the Iron Rom and DO NOT CHECK REBOOT AFTER THE IRON ROM INSTALLATION, when it has finished, install the xluco kernel. Than do a Reboot. for me, the Rom took some time to boot, and often did some random reboots. when you see the assistant, you have to be very fast, dont configure anything, as I already said before, it will very likely crash after some time.
So, now why I opned this Thread: I'm not a developer, so I cannot do this by myself. Hope I will get some help, I know everybody is waiting for a Lollipop Custom Rom
good point mate ... Maybe I'm going to give other CRs of that a Try ... have you tried that with other Custom ROMs like AOSP ones or others ?
Yes, I did. In the past I could get a KitKat Rom from our big brother P900 running on my device using the same method as I used here.
wulkanat said:
In this Thread I will port the Iron Rom from the Tab S to our Note 2014
Thanks to Tkkg1994 for making the awsome Iron Rom and xluco for the Kernel
Just to be clear: I didn't developed the Iron Rom (http://forum.xda-developers.com/galaxy-tab-s/development/prerooted-stock-touchwiz-rom-t2973107) nor the xluco Kernel (http://forum.xda-developers.com/showthread.php?t=2725193. I just put them together.
Ok, first how you install the Iron Rom: Download the Iron Rom for the T800 and the xluco Kernel for SM-P600 first and put them on external SD Card. After that go into Recovery and wipe EVERYTHING exept external storage. Maby you can also wipe system only but i highly recommend yout to wipe everything. Install now the Iron Rom and DO NOT CHECK REBOOT AFTER THE IRON ROM INSTALLATION, when it has finished, install the xluco kernel. Than do a Reboot. for me, the Rom took some time to boot, and often did some random reboots. when you see the assistant, you have to be very fast, dont configure anything, as I already said before, it will very likely crash after some time.
So, now why I opned this Thread: I'm not a developer, so I cannot do this by myself. Hope I will get some help, I know everybody is waiting for a Lollipop Custom Rom
Click to expand...
Click to collapse
@wulkanat @hitman1376 were either of you able to get this ROM running on your device? If so, which build did you use? I've tried at least a dozen different configurations via Aroma Installer on both the 2.4.5 and 2.5 builds, but the SystemUI crashes on me within seconds of booting up every time.
raneym305 said:
@wulkanat @hitman1376 were either of you able to get this ROM running on your device? If so, which build did you use? I've tried at least a dozen different configurations via Aroma Installer on both the 2.4.5 and 2.5 builds, but the SystemUI crashes on me within seconds of booting up every time.
Click to expand...
Click to collapse
To be honest , I didn't try it out ... but , as the devices have so many things in common , it wasn't so odd ... but , does it happen the same on the MM ROM ?
With Best Wishes
Hitman1376
hitman1376 said:
To be honest , I didn't try it out ... but , as the devices have so many things in common , it wasn't so odd ... but , does it happen the same on the MM ROM ?
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
You would think so. A couple years ago, it seemed like most apps/features were interchangeable between the Note 2014, Note Pro, Tab Pro, and Tab S on Kitkat. I distinctly remember my go-to ROM was originally designed for the Note Pro.
As far as IronROM V3.0 (MM) goes, the Aroma installer detected my device right away and put the kibosh on that experiment... not that it would have worked anyway seeing as how we don't have a 6.0.1 kernel... I was just hoping to get enough of the ROM installed so I could use TWRP's file manage to extract the files I want while still in recovery.
Anyway, now that my Note7 will be stuck with a non-rootable, unsupported, firmware for eternity; I figured it'd be fun to grab my old SM-P600 and see what havoc I can wreak on it.
raneym305 said:
You would think so. A couple years ago, it seemed like most apps/features were interchangeable between the Note 2014, Note Pro, Tab Pro, and Tab S on Kitkat. I distinctly remember my go-to ROM was originally designed for the Note Pro.
As far as IronROM V3.0 (MM) goes, the Aroma installer detected my device right away and put the kibosh on that experiment... not that it would have worked anyway seeing as how we don't have a 6.0.1 kernel... I was just hoping to get enough of the ROM installed so I could use TWRP's file manage to extract the files I want while still in recovery.
Anyway, now that my Note7 will be stuck with a non-rootable, unsupported, firmware for eternity; I figured it'd be fun to grab my old SM-P600 and see what havoc I can wreak on it.
Click to expand...
Click to collapse
Well , if you just want to play around , you can try out the stock Lollipop with my Prime Kernel and get better Performance and Battery or even CM13 / CM14 ... about the aroma , you can disable the device verification ... also I guess you can force the TW MM boot with Lollipop Kernel like it boots CM13 and CM14 ( I don't mean booting without any problems and also don't forget T-805's MM Kernels !! ) the Biggest problem is that we don't have a MM Bootloader which is the biggest problem ... anyway , this device is still so powerful to play newest games and OSs ... It's not fair to abandon it :laugh: ... You know ? I had a very busy day and I have been awake since around 6 AM when I woke for salat till now which is 12:41 AM :crying: !! so , My brain doesn't have any more juice and I need to get some sleep ... I hope you like my kernel ( esp. In case you'd like to test it out :laugh: ) ... I Updated it just some minutes ago
With Best Wishes
Hitman1376
my jiayu s3 sometimes every day sometimes in 2 or 3 days power off and vibrate continuously. i must to remove battery , put again and then power on.
what's the problem?
sorry for my bad english
Gabryell321980 said:
my jiayu s3 sometimes every day sometimes in 2 or 3 days power off and vibrate continuously. i must to remove battery , put again and then power on.
what's the problem?
sorry for my bad english
Click to expand...
Click to collapse
YOu give very little information
Say everything about your phone ...
Does it have stock rom or custom rom and if so which ? Say everything you have done to install the rom and the things you did after you installed the rom
Is it rooted ? How ? (the program you used to root)
Give every information in detail and then we will anser you
pfavayi said:
YOu give very little information
Say everything about your phone ...
Does it have stock rom or custom rom and if so which ? Say everything you have done to install the rom and the things you did after you installed the rom
Is it rooted ? How ? (the program you used to root)
Give every information in detail and then we will anser you
Click to expand...
Click to collapse
i tryed many roms , rooted and no rooted. now i have RC 5 from jiayu.de without root.
but is the same problem whith any rom
the phone just power off and vibrate continuously
My random poweroffs stopped after I replaced the battery.
Gabryell321980 said:
i tryed many roms , rooted and no rooted. now i have RC 5 from jiayu.de without root.
but is the same problem whith any rom
the phone just power off and vibrate continuously
Click to expand...
Click to collapse
Change battery , buy a konspon (about 3700mah)
(You like shot explanations , you get shot answers)
ok, thank you, i will try to change battery
the business is as follows DEV'S, I tested the ROM CM 13 of E5 on my GALAXY E7 (E700M) modifying the updater-script file and managed to make the ROM work seemingly, the problem is in the touch that does not work and the screen if I press the power button and it turns off, it does not turn on again the screen, the cellphone only makes normal noises and sounds with volume keys) without bootloop or anything, I tried to restore the original boot.img of the Galaxy E7 to see if it works the touch but then it was in bootloop! Do you think it would be possible to make it work? because it already works really! only not 100% hahahah
I WANT GALAXY E7 ANDROID 6.0+! HELP :crying:
you have to build a cm13 kernel for galaxy e7, then touch will work, but still bug in back camera
RioFebrian said:
you have to build a cm13 kernel for galaxy e7, then touch will work, but still bug in back camera
Click to expand...
Click to collapse
Where can I find source files to compile? They have managed to make recovery for e7, I think someone has kernel source files so ...
SOURCE KERNEL CM12.1 GALAXY E7
LudwigFerdinand said:
Where can I find source files to compile? They have managed to make recovery for e7, I think someone has kernel source files so ...
Click to expand...
Click to collapse
CM 13 on E7 is incredible
Thanks
I would like to port Lineage or TW from J5 to E7 but i cant find device tree and vendors for this device
Tisenoiazei100 said:
I would like to port Lineage or TW from J5 to E7 but i cant find device tree and vendors for this device
Click to expand...
Click to collapse
Does the Galaxy E5 Lineage can not be? because I tested it here and everything worked, until the chip sim 4g ... only the touch that did not work and I wanted to see this about the kernel to see if it would work, I could not compile or make a kernel that works the touch
Tisenoiazei100 said:
I would like to port Lineage or TW from J5 to E7 but i cant find device tree and vendors for this device
Click to expand...
Click to collapse
tested and worked for me! less the touch was this: https://forum.xda-developers.com/galaxy-e-series/orig-development/rom-lineageos-14-1-t3585887
I modified the scripts and installed and worked with twrp ( less the touch, image Ok)
image works but when I turn off and turn on the screen, the image does not return
Less Touch please devs help us
hacker812c said:
Less Touch please devs help us
Click to expand...
Click to collapse
For user Galaxy E7
I will build a special kernel for galaxy e700xx (3g-4g)
and compatible with rom cm12-14
but you should try it
Please give custom kernal for e700h
No roms is available
please i dream to see working custom rom 6.0 or 7.1.1 on my galaxy E700H before i die .
this phone hasn't any working custom rom in any site , why all careless about it .
please we need to change poor performance of kitkat and poor appearance on it , lollipop update on this phone have lot's of bugs like videos lag in youtube and poor battery usage .
we need good rom with 6.0 M Or 7.1.1 N TW Or Mi rom.
please make kernel for this rom to be able to build custom roms
Please for e700h
AhmedNinja said:
please i dream to see working custom rom 6.0 or 7.1.1 on my galaxy E700H before i die .
this phone hasn't any working custom rom in any site , why all careless about it .
please we need to change poor performance of kitkat and poor appearance on it , lollipop update on this phone have lot's of bugs like videos lag in youtube and poor battery usage .
we need good rom with 6.0 M Or 7.1.1 N TW Or Mi rom.
please make kernel for this rom to be able to build custom roms
Click to expand...
Click to collapse
couldn't find anywhere, few tried after changing build script which didn't work properly.
few had issues like touch and screen lights.
LudwigFerdinand said:
tested and worked for me! less the touch was this: https://forum.xda-developers.com/galaxy-e-series/orig-development/rom-lineageos-14-1-t3585887
I modified the scripts and installed and worked with twrp ( less the touch, image Ok)
image works but when I turn off and turn on the screen, the image does not return
Click to expand...
Click to collapse
Please do it bro