NEWBIE @ LG G2 : starting... from what rom... - G2 Q&A, Help & Troubleshooting

Hi all,
as u perhaps already know, after almost 3 years with my beloved LG 2X, I bought the LG G2 D802 32 GB last week
Now... I've installed the LG Drivers onto my Win 8.1... I've rooted the phone and installed TWRP recovery.
It's time to flash my first custom rom on the new little monster
But what rom ? I've seen that some roms are sized 1 GB while others... 200 MB ( as almost all roms of my other android' based devices ). Obvioulsy I've looking for a 4.4.2 rom. From what rom it's better to begin ? Actually, what's most stable 4.4.2 rom ?
Thx in advance

PYCON said:
Hi all,
as u perhaps already know, after almost 3 years with my beloved LG 2X, I bought the LG G2 D802 32 GB last week
Now... I've installed the LG Drivers onto my Win 8.1... I've rooted the phone and installed TWRP recovery.
It's time to flash my first custom rom on the new little monster
But what rom ? I've seen that some roms are sized 1 GB while others... 200 MB ( as almost all roms of my other android' based devices ). Obvioulsy I've looking for a 4.4.2 rom. From what rom it's better to begin ? Actually, what's most stable 4.4.2 rom ?
Thx in advance
Click to expand...
Click to collapse
It depends upon your choice either Stock or AOSP based.
Start with PA4.1 or CyanoGenMOD 11.

waleedshiekh said:
It depends upon your choice either Stock or AOSP based.
Start with PA4.1 or CyanoGenMOD 11.
Click to expand...
Click to collapse
As I can remember, for example, for my 2X... I held the stock original rom for first 4 days Then only cyanogen, paranoid, pacman, kang etc etc rom, I think all cyano's based I've always thought the cyanogen with reduced sizes rather than stock may be slim, lite and fastest than stock... My opinion, my hope.
PS If I use hot reboot or a similar app to reboot into recovery, no problem. TWRP starts, I'm able to backup the system, etc. If I use the vol - & power on button, no way to enter into TWRP

PYCON said:
As I can remember, for example, for my 2X... I held the stock original rom for first 4 days Then only cyanogen, paranoid, pacman, kang etc etc rom, I think all cyano's based
PS If I use hot reboot or a similar app to reboot into recovery, no problem. TWRP starts, I'm able to backup the system, etc. If I use the vol - & power on button, no way to enter into TWRP
Click to expand...
Click to collapse
1. Power off the phone.
2. Hold Vol Down + Power button
3. When LG logo flashes leave power button and hold it again (Don't leave volume down button)
4. You will reach to Hard Reset menu press power button twice
5. Instead of hard resetting you will be moved to TWRP/CWM.

waleedshiekh said:
1. Power off the phone.
2. Hold Vol Down + Power button
3. When LG logo flashes leave power button and hold it again (Don't leave volume down button)
4. You will reach to Hard Reset menu press power button twice
5. Instead of hard resetting you will be moved to TWRP/CWM.
Click to expand...
Click to collapse
I'll try... :fingers-crossed:

PYCON said:
Hi all,
as u perhaps already know, after almost 3 years with my beloved LG 2X, I bought the LG G2 D802 32 GB last week
Now... I've installed the LG Drivers onto my Win 8.1... I've rooted the phone and installed TWRP recovery.
It's time to flash my first custom rom on the new little monster
But what rom ? I've seen that some roms are sized 1 GB while others... 200 MB ( as almost all roms of my other android' based devices ). Obvioulsy I've looking for a 4.4.2 rom. From what rom it's better to begin ? Actually, what's most stable 4.4.2 rom ?
Thx in advance
Click to expand...
Click to collapse
PA 4.1
Nameless rom
cyanogenmod 11
slimkat (but i had an overheating issue)

First, you have to decide between AOSP exeprience or LG Android experience. I tried several AOSP ROM-s cuz KK but went always back to the modified stock ROM's. Why?
a) QuickWindow.
b) There are some LG Apps I like (QuickRemote, SplitView tec)
c) I use my G2 with my corporate exchange mail account and have never used a better email application than the LGEmail before. I can set out of office replies from the application.
d) Not a big deal but I really like the weather animation on my lockscreen.
e) I cannot live without the horizontal quick settings and became frustrated on the classical quick settings on any AOSP ROM (even if there are some 3rd party solutions).
My personal recommendation: do not play with 4.4.2 (LG) ROM-s, try CloudyFlex 1.4 - very nice and stable. As long as there is no official update from LG for open phones and no custom recovery on KK and no Xposed 2.5 I won't switch to 4.4.2.
However, everything is matter of personal taste. Try and decide yourself.

ivanferdino said:
PA 4.1
Nameless rom
cyanogenmod 11
slimkat (but i had an overheating issue)
Click to expand...
Click to collapse
I'm not able to find Paranoid Android for G2... it exists ??? Where ???
Kickoff said:
First, you have to decide between AOSP exeprience or LG Android experience. I tried several AOSP ROM-s cuz KK but went always back to the modified stock ROM's. Why?
...
Click to expand...
Click to collapse
Let me reply :
a) QuickWindow : the possibility of reduce the size of an app, like in windows OS ? Not so usefull, for my usage...
b) There are some LG Apps I like (QuickRemote, SplitView tec) : quick remote is wonderful, I've found the porting of this app for any kind of roms... I've to test it.
c) I use my G2 with my corporate exchange mail account and have never used a better email application than the LGEmail before. I can set out of office replies from the application : I use aqua mail
d) Not a big deal but I really like the weather animation on my lockscreen : not so usefull, for my usage...
e) I cannot live without the horizontal quick settings and became frustrated on the classical quick settings on any AOSP ROM (even if there are some 3rd party solutions) : ya, it's true, really nice
Thx u man
PS I've read that with stock kitkat, there's no way to make usable CWM / TWRP recovery... :-o It's true ?!

PYCON said:
Hi all,
as u perhaps already know, after almost 3 years with my beloved LG 2X, I bought the LG G2 D802 32 GB last week
Now... I've installed the LG Drivers onto my Win 8.1... I've rooted the phone and installed TWRP recovery.
It's time to flash my first custom rom on the new little monster
But what rom ? I've seen that some roms are sized 1 GB while others... 200 MB ( as almost all roms of my other android' based devices ). Obvioulsy I've looking for a 4.4.2 rom. From what rom it's better to begin ? Actually, what's most stable 4.4.2 rom ?
Thx in advance
Click to expand...
Click to collapse
PYCON said:
I'm not able to find Paranoid Android for G2... it exists ??? Where ???
Let me reply :
a) QuickWindow : the possibility of reduce the size of an app, like in windows OS ? Not so usefull, for my usage...
b) There are some LG Apps I like (QuickRemote, SplitView tec) : quick remote is wonderful, I've found the porting of this app for any kind of roms... I've to test it.
c) I use my G2 with my corporate exchange mail account and have never used a better email application than the LGEmail before. I can set out of office replies from the application : I use aqua mail
d) Not a big deal but I really like the weather animation on my lockscreen : not so usefull, for my usage...
e) I cannot live without the horizontal quick settings and became frustrated on the classical quick settings on any AOSP ROM (even if there are some 3rd party solutions) : ya, it's true, really nice
Thx u man
PS I've read that with stock kitkat, there's no way to make usable CWM / TWRP recovery... :-o It's true ?!
Click to expand...
Click to collapse
PA LINK:
http://forum.xda-developers.com/showthread.php?t=2502789
with stock KK you will lose custom recovery

Before to attempt to flash my first rom ( PA ), I've read some topics about to recover a bricked phone...
Not very nice to read 32 GB that become 16 GB
There's a guide / help / how to, in order to avoid ANY problem ? Or a guide to recover the phone with correct rom version ( I've a G2 D802 32 GB Italian ) ?

PYCON said:
Before to attempt to flash my first rom ( PA ), I've read some topics about to recover a bricked phone...
Not very nice to read 32 GB that become 16 GB
There's a guide / help / how to, in order to avoid ANY problem ? Or a guide to recover the phone with correct rom version ( I've a G2 D802 32 GB Italian ) ?
Click to expand...
Click to collapse
I've ran into these issues whilst not paying attention to what I was doing but have recovered from them all, so its pretty safe, if you want to run stock KitKat there will be custom recovery very soon probably in the next few days as well as fixes for the bugs in aosp as KitKat kernel source has been released, I'm currently running Dirty Unicorn and love it
Sent from my g2 using XDA Premium 4 mobile app

Nameless
Sent from my LG-D802 using XDA Premium 4 mobile app

Solved all, without problems. Tried paranoid, droid, liquidsmooth and other 4.4.2 roms without a problem
Miracle phone

Related

[Noob Time] Why FLash To CM 10.1 ?

Good Evening Dudes
I'm just introduced on this section and it's first time than i ve had a stuff like this awesome samsung
Smooth Fast Strong And God ! it's the beautifull customisable stock rom (it's really beautifull to compare with htc stock rom)
well the question is not here and the target also
i've never had the oppotunitities to try a CM 10.1 on any device Htc desire x hasnt official CM and not possible to port CM10.1 cauz Htc doesnt provide the kernel source.... damn
(it's was juste for put in situation)
What's the real interest -Gain can i expect with the CM10.1 on the Galaxy S4 ?
Whith this rom it's sound interesting to put a custom kernel also.
what can we do with cm 10.1 than we cannot with a stock rom ?
Yeah a know , i can make a backup on my stock rom , flash the cm 10.1 try and if doesnt like it restore to the backuped stock.
Thanks for your time
If you had any other suggestion better than the CM 10.1 (i know it s on nightlies sound like equal as alpha but
topic is open :s
Well the Stock ROM is pretty much as bloated as a whale. CM is only 200MB in size, so first of all it will save space on your internal memory. Second of all, you won't have a lot of processes running in the background like you do now, your phone will be a LOT more responsive. Ofcourse, as with any custom ROM, there will be some bugs and those ROMs will need testing and updates (that's why nightlies exist). But eventually there will be stable versions and imo, it'll beat the stock any day. On the other hand, the stock ROM has some functions like the IR blaster, the smart-pause, smart-scroll and hover function, etc. If you're a big fan of those things, stick with your Stock ROM. But if you would like to a clean, simple, bloat free and faster experience than you have now, a custom ROM is a great way to achieve it. But that's not the only thing ofcourse, CM also has some extra functions and customization options you won't find in your stock ROM, you can tweak your system quite a lot and there are some things I couldn't live without (for example swapping your menu key for your recent apps switcher, and putting the menu function on the long press ).
Thanks a lot
Sound really interesting
CM 10.1 it's more in touch with i'm looking for
The actual build of CM 10.1 can be used on a basic day usage ? or it's better to wait a few days ?
If i flash the cm now ? need also to flash another kernel or just flash the zip by philw touch recovery ?
can i come back to my stock backuped rom after if i want ? with the restore function of philz touch recovery ?
I'm using Philz Recovery too and yes you can flash CM10.1 from there (I have the latest build from June 12th on it). Before you flash, make your sure you wipe/factory reset your phone in Philz Recovery. You might also need to flash the CM10.1 rom 2 or 3 times (the second time it usually works), on the first try it always gives a Status 7 error (don't worry). Look at the thread for the Offical CM10.1 Nightlies, there's a lot information there!
It's working pretty good for me, I haven't found any major bugs so far. Just make sure you make a Nandroid backup in Philz Recovery first (and store it your external SD card for safety and to save space ofcourse ). You can always return to that backup through the restore function in Philz Recovery yes.
Also, if you update your CM10.1 with a new nightly build (for example next week, or next month), do it manually and flash it in the recovery each time. Updating it from the Settings->About->Cyanogenmod Updates menu bricked my phone today, so I guess there is still a bug there. Besides that, there are no issues what so ever according to me.
PS: You're from Liege? I'm from Genk
last question before the first try
With the original Cm we need to flash gapps separately or it's inside the rom ?
If external suppose to take the last release on goo
If I remember correctly you need to flash it separately
Sent from my GT-I9505 using xda app-developers app
Try This one -> http://forum.xda-developers.com/showthread.php?t=2296266
Yeah after flash the rom 4 times finally she install correctly ( 3 times error7 but no affraid)
Ui is clear, phone running smooth and very well no issue with wifi or 3g
The first bug i ve seen was about the carrier name -- the carrier name is showed like an id on a database (think the code for showed the cells with carrier name is not correct)
For the rest no speciq issue detected
Thanks a lot for your help
PS : i ve also find a answer to one of my question
when use cm you must flsah the gapps separately and link is coming on cyanogen page.
I ve read also than the build for the S4 T-mobile seems to work fine on this phone more bugs corrected on it ?
No trying BT for the moment cauz i dont had BT device
@disturbed : i ll try the rom linked this evening . Thanks a lot

[Q] hey guys new to this phone lg L5 E612 need a little help?

ok so im not new to rooting or anything as my last phone was an ace (heaps of cool stuff for that phone)
i have my phone rooted now LG L5 E612 and have supeeruser installed last time i was here i seen that there was people saying no custom roms for this phone as bootloader is locked, now i return and i see a few for this phone just wondering how to install a rom and which one is the best one to use also ones that are eye candy or totally change the GUI
this rom is best in my view with no lags
hey i am using this cm 10.1 (4.2.2)rom since 1 year.its best in my view.it can be overclocked to 1Ghz.and ram can be increased by using ram expander.
chooky536 said:
ok so im not new to rooting or anything as my last phone was an ace (heaps of cool stuff for that phone)
i have my phone rooted now LG L5 E612 and have supeeruser installed last time i was here i seen that there was people saying no custom roms for this phone as bootloader is locked, now i return and i see a few for this phone just wondering how to install a rom and which one is the best one to use also ones that are eye candy or totally change the GUI
Click to expand...
Click to collapse
you need to unlock the bootloader and get a custom recovery, then you can easily install a custom rom
i am on cm11 beta 7.1, oc up to 1100mhz:laugh:
thanks guys i have looked around and all i can find is rooting tuts could anyone link me to a full tut from start to finish please?
ok so i tried several ways got cwm installed but phone keeps resetting
i used these ones
http://forum.xda-developers.com/showpost.php?p=38053729&postcount=1159
http://www.lg-phones.org/cwm-custom-recovery-for-lg-optimus-l5.html
http://www.lg-phones.org/unlock-bootloader-on-lg-optimus-l5-e610e612e615.html
still getting it resetting on me
also didnt back up my bootloader either.....................just tryed the e610 bootunlocker not resetting on me working ok now, now to find a tutorial to flash a rom
got it running the e610 cm10 working ok no reboots ect seems to be working ok now

[Q][L5 II] Touchscreen not working after flashing ROMs

I have an L5 II E615(f) rooted. Last 2 days I tried to flash another rom for the first time.
So, I got latest CWM installed using ROM Manager and tried to flash this ROM:
[L5][E610/E612/E617][ROM][KOT49H][4.4.2][BETA 2] Pure AOSP KITKAT 4.4.2
Followed all the instructions properly, I put the ROM in external SD card, did factory reset, and wiped all caches, then flash the ROM and GApps. After the reboot, I got inside the new ROM but my touchscreen isn't working at all, but the volume and power button works.
Tried this ROM too (I entered the recovery mode by taking the battery off and put it back on, pressed power+volume down > and pressed 'back' button) [L5][E610/E612/E617][ROM][KTU84P][4.4.4][BETA 9.4] Unofficial CyanogenMod 11 Build , still not working. So I thought it's because the ROM doesn't support E615 ([L5][E610/E612/E617]) So I tried to install other ROMs:
[L5][ROM][4.4.4][AOSP] Vanir weeklies, Fast and smooth
[L5/L7][4.4.4][KTU84P][FINAL]Unofficial Paranoid Android 4.4 rom build by Cr3pT
They don't mention the exact type of the phone, but none are working still. Now I'm stuck with the first ROM forever in the lockscreen LOL. I'm pretty sure I followed the instructions properly.
Where's the problem? is it the ROM or another things? Or maybe can you suggest me some ROMs that might work with my device? I really want 4.4.x ROMs though Your helps are all appreciated. Thank you very much!!
Tried to flash
[L5][L7][UNOFFICIAL]SlimKat[OPTIMA TEAM][4.4.4] and CM 10 for E610
still same problem, touch screen not working. Someone please tell me what ROM should i use :crying:
You have installed a L5 E610/E612 ROM on L5 E615 which is dual sim?
Try a ROM meant for E615, like BhekBhek and check if touch works there..
Also, do you have sim card inserted? Because for me, despite having E612, touch didn't work without sim..
skyinfo said:
You have installed a L5 E610/E612 ROM on L5 E615 which is dual sim?
Try a ROM meant for E615, like BhekBhek and check if touch works there..
Also, do you have sim card inserted? Because for me, despite having E612, touch didn't work without sim..
Click to expand...
Click to collapse
Yes, I installed the ROM, only touchscreen not working. Those ROMs for E615 still have 'ugly' animation I think I'll use it temporary because my phone's been disabled for the last 2 days haha.
And yeah, I had my sim card inserted.
rangecrate said:
Yes, I installed the ROM, only touchscreen not working. Those ROMs for E615 still have 'ugly' animation I think I'll use it temporary because my phone's been disabled for the last 2 days haha.
And yeah, I had my sim card inserted.
Click to expand...
Click to collapse
Replacing some files might help too..
Use porting guide by Caliban (in general section) (Guide is for porting from P700 to E610) .. There there will be some files listed, replace those files with a ROM designed for E615.. Hopefully should work..
Battery will be (most probably) pathetic though, you need a E615 kernel ..
skyinfo said:
Replacing some files might help too..
Use porting guide by Caliban (in general section) (Guide is for porting from P700 to E610) .. There there will be some files listed, replace those files with a ROM designed for E615.. Hopefully should work..
Battery will be (most probably) pathetic though, you need a E615 kernel ..
Click to expand...
Click to collapse
That would be really cool, I can't find the guide though, and if it's really complicated I won't be able to do that because I'm still a beginner haha. Maybe I should wait for another months for someone to do it. For now I'll try this one
Looks cool, too bad it's discontinued. Wanted to try BhekBhek but the download link is broken (or is it me?). I'm really obsessed of KitKat's UI though :silly:
Another Topic
Another thing, does anyone know how to hide SIM 2 icon and/or tint them to white? Because they look ugly when I'm using Tinted Status Bar, thanks.
Here this is the guide
http://forum.xda-developers.com/showthread.php?t=2428797
Let me know the result
Replace the files mentioned there with the ones from a E615
Hopefully should work, good luck!
Sent from my Galaxy Note 3 using Tapatalk

help install CyanogenMod on Samsung s5

hi hello so i wanna install CyanogenMod 11.0 | Android 4.4.4 KitKat
or lolipop 5.0 that support my S5 i dont know which one to choose from many links that i see on forums
anyone can guide me and help me
i will tell my phone info
model: Sm-900F
G900FXU1ANG7
newman2015 said:
hi hello so i wanna install CyanogenMod 11.0 | Android 4.4.4 KitKat
or lolipop 5.0 that support my S5 i dont know which one to choose from many links that i see on forums
anyone can guide me and help me
i will tell my phone info
model: Sm-900F
G900FXU1ANG7
Click to expand...
Click to collapse
Hi newman2015:
First of all, that can void you warranty since you will root and install a custom recovery on the S5 (Of course it depends on your region).
If you want a more stable and mature ROM, then go for Kitkat, some ROMS out there have great MODs like the Dragon KK CM11 rom.
On the other hand if you want to try something new and new capabilities then go for Lollipop, there are great variants out there and they are getting more stable each day, but expect issues.
I have tried several of them but the best for LP are Bliss, Dragon, CM12 from albino887 (UNNOFICIAL)... For KK i recomend Dragon ROM, Liquid Smooth and Vanir, all of them with great customization, but that's my personal suggestion.
I hope this helped.
Best! :highfive:
there r alot options i need know which one support my phone cuz if i am not wrong in need rom with G900FXU1ANG7
right? to support Sanpdragon galaxy
newman2015 said:
there r alot options i need know which one support my phone cuz if i am not wrong in need rom with G900FXU1ANG7
right? to support Sanpdragon galaxy
Click to expand...
Click to collapse
Hi newman2015:
Since you have the International variant of S5, you can flash any of those ROMs that I mentioned earlier, if you need further assistance don't hesitate to ask.
Best! :good:
i would like Dragon KK CM11 rom ,. i wanna the latest stable Rom out there not 5.0 cuz atm its not stable
would u tell me how install it so it will not **** up my phone. and is it possible there choose country:israel
so i will have hebrew option and it will support my mobile company
newman2015 said:
i would like Dragon KK CM11 rom ,. i wanna the latest stable Rom out there not 5.0 cuz atm its not stable
would u tell me how install it so it will not **** up my phone. and is it possible there choose country:israel
so i will have hebrew option and it will support my mobile company
Click to expand...
Click to collapse
Hi newman2015:
Of course. IF YOU WANT FIND A GUIDE WITH IMAGES, just google it. But the basic steps are as follow.
- Always do a backup!!, since you can lost everything (CONTACTS, FILES, PHOTOS, ETC.)
- Download a stock image in case that anything goes wrong, that way you can boot you S5 once again
- Download ODIN, that way you can boot you S5 once again and just in case
- Download your desired ROM to your PC
- Download GAPPS to your PC (remember to download KK GAPPS)
- First of all follow the guide to root and install a custom recovery (Chainfire CF-Root, don't do anything extra FOLLOW THE GUIDE and you will be safe)
- Once you have root and a custom recovery and you booted into ANDROID OS, transfer the ROM and GAPPS to your phone
- Remember to do a backup!!
- Find your APN settings in your current ROM and take note of then, back up them, etc.
- Turn off your phone and press HOME, POWER and VOLUME UP button to boot into RECOVERY
- Find the option WIPE
- Swipe to do a Factory Reset (you will start clean... )
- Once it finish, select the option BACK (DON'T SELECT FORMAT DATA OR ADVANCED WIPE)
- Select the OPTION INSTALL
- Navigate to the directory where you saved the ROM and GAPPS
- First select THE ROM FILE
- Select the OPTION ADD MORE ZIPs
- Select GAPPS file
- Swipe to begin...
- Wait a little... a little more...
- If you don't receive errors select the OPTION FLASH DALVIK and CACHE (Just to be safer)
- Select the option REBOOT
- Enjoy your new ROM
- Restore your APN settings, contacts, etc.
Hope it helps
Best!
P.D. To be honest I can't remember if the hebrew option is there, but my guess is that it is
Hi you did not tell how I get exactly rom I need for my phone
newman2015 said:
Hi you did not tell how I get exactly rom I need for my phone
Click to expand...
Click to collapse
Hi newman2015:
Just go to this thread Fusion ROM
And download the klte version.
Hope it helps
Best!
and i can write in hebrew there? i mean israel keyboard ?
which one this -->
Fusion Rom
Features KitKat 4.4.4_r2:
OR
Download Fusion 4.6 KitKat
so i downloaded
1. Fusion-v4.6-2014-11-09-klte
2. pa_gapps-stock-4.4.4-20150125-signed
and i rooted my phone.
i copy those 2 files to my SD card right
what next install >?
i did not work.. it says failed to verfie the whole file signature .
it fails to install.
and then it just logback to 4.4.2 i had

LG G3 F400S/L/K Owners Thread

Hello to All
I am creating this thread because I can't find a thread on XDA dedicated to G3's Korean version F400S/L/K and I think it's worth having a dedicated thread.
Here are some goals I would like us to achieve on this thread
1 Gather information about the Customs ROMs/Kernel/MODs for F400 variant scattered around on XDA or any other forum like Lgviet etc.
2 Share your experience with the ROMs you tried on F400.
3 Try to find out a stable ROM for F400 by sharing your experience.
4. Share you experience with different experiments you did on your F400 e.g trying a ROM not intended for Korean G3.
etc etc etc
Please go on and share your thoughts
I have personally used these ROMs on F400L
Cloudy 2.2
CM 12 and CM 12.1
Resurrection Remix LP
BlissPop 2.0 and 3.2
In my experience I found Blisspop have most customization options in particular the capability to change screen dpi. On other AOSP based the font appears to be too small for me.
Another noticeable thing is that you have the option to change animation level to .75 which I think is not available in other custom ROMKs.
About performance, this ROM runs very smooth because default animation scale is set to .75.
ROM has awesome stand by battery timing but currently I'm only getting 3 to 3.5 hours of screen on time.
I had a small Question/Doubt
I recently purchased LG G3 F400K from ebay in India.
Was wondering if i can install the stock D855 (International Version) Stock ROM on this?
[NOOB Question] What could i gain/loose possibly?
Also, How can i make the Korean fonts at some places to appear in english/ How can i make the ROM appear FULLY in english (everything in Eng)?
Thanks in advance.
i have F400s version ....
i am on cloudyg3 2.2 for now ...
i tried blisspop, cm12 , Resurrection remix ...
and all working v.good for me ...
.....
in recent weeks i tried dualboot patcher ... and i installed AOSP rom beside my primary rom (cloudyg3) ... and it was very good ...
be careful with flashing any rom that is not listed for out korean version (self opinion) ...
if you have a question ask me ...
.....
but ...
i have a question : how can i reach recovery mode without app nor ADB ... ( like using vol. down + power key in D855 versions ) ??
---------- Post added at 01:10 PM ---------- Previous post was at 01:08 PM ----------
anmolkakkar said:
I had a small Question/Doubt
I recently purchased LG G3 F400K from ebay in India.
Was wondering if i can install the stock D855 (International Version) Stock ROM on this?
[NOOB Question] What could i gain/loose possibly?
Also, How can i make the Korean fonts at some places to appear in english/ How can i make the ROM appear FULLY in english (everything in Eng)?
Thanks in advance.
Click to expand...
Click to collapse
flash a custom ROM like "cloudyg3 2.2" it is such a great rom with fully english support ...
anmolkakkar said:
I had a small Question/Doubt
I recently purchased LG G3 F400K from ebay in India.
Was wondering if i can install the stock D855 (International Version) Stock ROM on this?
[NOOB Question] What could i gain/loose possibly?
Also, How can i make the Korean fonts at some places to appear in english/ How can i make the ROM appear FULLY in english (everything in Eng)?
Thanks in advance.
Click to expand...
Click to collapse
I will recommend you to use cloudy ROM. It will solve all the problems you are having with Korean stuff and this ROM is based on stock G3 ROM.
But before doing this you have to root your G3.
If you try to flash D855 ROM on your Korean model you will end up probably with no signal, Wifi and Bluetooth will not work. You can even end up soft bricking your device.
osa993ma said:
i have F400s version ....
i am on cloudyg3 2.2 for now ...
i tried blisspop, cm12 , Resurrection remix ...
and all working v.good for me ...
.....
in recent weeks i tried dualboot patcher ... and i installed AOSP rom beside my primary rom (cloudyg3) ... and it was very good ...
be careful with flashing any rom that is not listed for out korean version (self opinion) ...
if you have a question ask me ...
.....
but ...
i have a question : how can i reach recovery mode without app nor ADB ... ( like using vol. down + power key in D855 versions ) ??
---------- Post added at 01:10 PM ---------- Previous post was at 01:08 PM ----------
flash a custom ROM like "cloudyg3 2.2" it is such a great rom with fully english support ...
Click to expand...
Click to collapse
Well I'm also tried numerous times to enter recovery using Hardware keys but no luck till now.
mohsin.android said:
I will recommend you to use cloudy ROM. It will solve all the problems you are having with Korean stuff and this ROM is based on stock G3 ROM.
But before doing this you have to root your G3.
If you try to flash D855 ROM on your Korean model you will end up probably with no signal, Wifi and Bluetooth will not work. You can even end up soft bricking your device.
Click to expand...
Click to collapse
Quick Question,
Since i am new with G3 (Although I have Xperia Z1 Compact and Nexus 6), I searched for the Root methods and got surprised to see so many. Could you please provide me the link to the rooting method which worked for you guys for F400K.
Also, For updating to Cloudy G3 2.2, is it ok to root on kitkat rom (stock which came out of the box), install TWRP, take full backup and then install?
Or should i install Stock Korean Lollipop firmware first? (If yes, request you to please point me to that as well, sorry for being demanding though)
osa993ma said:
i have F400s version ....
i am on cloudyg3 2.2 for now ...
i tried blisspop, cm12 , Resurrection remix ...
and all working v.good for me ...
.....
in recent weeks i tried dualboot patcher ... and i installed AOSP rom beside my primary rom (cloudyg3) ... and it was very good ...
be careful with flashing any rom that is not listed for out korean version (self opinion) ...
if you have a question ask me ...
.....
but ...
i have a question : how can i reach recovery mode without app nor ADB ... ( like using vol. down + power key in D855 versions ) ??
---------- Post added at 01:10 PM ---------- Previous post was at 01:08 PM ----------
flash a custom ROM like "cloudyg3 2.2" it is such a great rom with fully english support ...
Click to expand...
Click to collapse
To enter recovery mode, you have to press vol.down + powerkey. When the LG logo appears, quickly press vol.down + vol.up. Before you do, make sure the power is shutdown completely (by remove battery). And note that you need to do very quick it very quick. I often success in one third of time.
---------- Post added at 03:19 AM ---------- Previous post was at 03:10 AM ----------
anmolkakkar said:
Quick Question,
Since i am new with G3 (Although I have Xperia Z1 Compact and Nexus 6), I searched for the Root methods and got surprised to see so many. Could you please provide me the link to the rooting method which worked for you guys for F400K.
Also, For updating to Cloudy G3 2.2, is it ok to root on kitkat rom (stock which came out of the box), install TWRP, take full backup and then install?
Or should i install Stock Korean Lollipop firmware first? (If yes, request you to please point me to that as well, sorry for being demanding though)
Click to expand...
Click to collapse
I use this for rooting: http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
And yes, you can upgrade straight from kitkat rom. Btw, I'm not responsible if you brick your device or your girl friend broke up with you because you destroy her phone.
I use this for rooting: http://forum.xda-developers.com/lg-g3/general/guide-root-lg-firmwares-kitkat-lollipop-t3056951
And yes, you can upgrade straight from kitkat rom. Btw, I'm not responsible if you brick your device or your girl friend broke up with you because you destroy her phone.
Click to expand...
Click to collapse
Thanks a lot . That made my life a lot easier.
Another thing i had in mind is, can we use system.img from the D855 (International version) and mix with "Radio.img and boot.img" of our F400K version's, so that it is completely stock and it boots up fine with Radios also working well?
anmolkakkar said:
Thanks a lot . That made my life a lot easier.
Another thing i had in mind is, can we use system.img from the D855 (International version) and mix with "Radio.img and boot.img" of our F400K version's, so that it is completely stock and it boots up fine with Radios also working well?
Click to expand...
Click to collapse
Theoretically it seems correct but this won't work.
You will still face problems with Radio.
I tried the same with AOSP rom but it didn't work
If we've spent so much, we can try, u never know - maybe its worth the try
But, for that, what files will we need and from where? And how do we de-compile/re-compile
it is wooooooooooooork thanX br0 ^_^
@2e6
Hi.
I've had the g3 for about 2 weeks now and I'm loving every bit of it. I've had a few questions regarding mine.
My device is F400s running v20f (lollipop) and I've been thinking of flashing cloudyG3 on it. The procedure would be this right,
1. Backup internal storage
2. Flash .tot of v10e (KitKat)
3. Root it using purpledrake
4. Flash twrp
5. Flash cloudyG3
Now what I don't know is, how do I flash twrp and how to enter recovery mode? By pressing power+vol down button nothing happens.
Thank you.
PS: sorry for being a noob. Never used an lg device before.
ishanbhatnagr96 said:
Hi.
I've had the g3 for about 2 weeks now and I'm loving every bit of it. I've had a few questions regarding mine.
My device is F400s running v20f (lollipop) and I've been thinking of flashing cloudyG3 on it. The procedure would be this right,
1. Backup internal storage
2. Flash .tot of v10e (KitKat)
3. Root it using purpledrake
4. Flash twrp
5. Flash cloudyG3
Now what I don't know is, how do I flash twrp and how to enter recovery mode? By pressing power+vol down button nothing happens.
Thank you.
PS: sorry for being a noob. Never used an lg device before.
Click to expand...
Click to collapse
1- you can flash TWRP using twrp manager app (you must be have root)
2-if you want to get in recovery mode press vol. down + power key till you see LG logo then press ((((vol down+ vol. up))) " but use this step after intalling TWRP ...
note : you can root your mobile using 'towelroot.apk" good and easy one
if you have any other question just ask
osa993ma said:
1- you can flash TWRP using twrp manager app (you must be have root)
2-if you want to get in recovery mode press vol. down + power key till you see LG logo then press ((((vol down+ vol. up))) " but use this step after intalling TWRP ...
note : you can root your mobile using 'towelroot.apk" good and easy one
if you have any other question just ask
Click to expand...
Click to collapse
thanks dude ... u saved my life
HelpG3 F400s issue
Help LG g3 facing problem after resetting the phone according to the previous owner.
the phone asking for pin/code.
the box was thrown away.
Hope someone could help
TIA :angel:

Categories

Resources