Database Users

Huawei P8lite bootloop after update

hy guys,
i got an ALE-L21
after an update it stucks in the boot animation first comes the huawei logo and than the "android" banner - and that is going to stay .
i already tried to factory reset and flash the available stockroms on it
but it always says "software install failed"
it is also rooted what i guess caused the problem in the first place
do you guys have any ideas what else i can try
-can enter fastbootmode
-no custom recovery
Problem Solved :
- download a rom and extract it with Huawei Update Extractor
- enter fastboot mode and flash manually boot.img, recovery.img, system.img and cust.img on your p8 lite
---- afterwards your p8lite should boot normally and if you want you can now reinstall the whole rom normally
---- download a rom
------ extract it
--------- put the 'dload' folder in the root dictionary of your (empty)sd-card
-------------shut it down
----------------press volume up and down - and than the power button til' the update starts
thanks to fooox1 from android-hilfe.de

Reyengine said:
hy guys,
i got an ALE-L21
after an update it stucks in the boot animation first comes the huawei logo and than the "android" banner - and that is going to stay .
i already tried to factory reset and flash the available stockroms on it
but it always says "software install failed"
V100R001C432B052 (Dual SIM / Europe)
V100R001C432B041c (Europe)
V100R001C432B046b (West Europe)
those 3 didnt work - how do i figure out which one i need without starting the device to look for the build number
it is also rooted what i guess caused the problem in the first place
do you guys have any ideas what else i can try
-can enter fastbootmode
-no custom recovery
Problem Solved :
- download a rom and extract it with Huawei Update Extractor
- enter fastboot mode and flash manually boot.img, recovery.img, system.img and cust.img on your p8 lite
---- afterwards your p8lite should boot normally and if you want you can now reinstall the whole rom normally
---- download a rom
------ extract it
--------- put the 'dload' folder in the root dictionary of your (empty)sd-card
-------------shut it down
----------------press volume up and down - and than the power button til' the update starts
thanks to fooox1 from android-hilfe.de
Click to expand...
Click to collapse
Hi Reyengine,
My huawei P8 lite ALE-L21 stuck at boot loop, My phone was rooted, my brother who was not aware of care about rooted phones update and hit the recent update issued by huawei. after update it is not booting anymore.
I tried the following,
Installing stock Rom through SD card but error: first attempt stuck at 90% and after force restart brought it to update over WiFi on startup. Then failed again and after that just gets stuck on logo.
Now I can not update through SD card it gives error: "software install failed" a no update file message blink before error.
Phone is not recognized in adb interface anymore.
Can you guide me in details, I am new to xda and not so good in fixing phones. Your help is appreciated. Thanks.
How to enter in Fastboot...?

shahper1 said:
Hi Reyengine,
My huawei P8 lite ALE-L21 stuck at boot loop, My phone was rooted, my brother who was not aware of care about rooted phones update and hit the recent update issued by huawei. after update it is not booting anymore.
I tried the following,
Installing stock Rom through SD card but error: first attempt stuck at 90% and after force restart brought it to update over WiFi on startup. Then failed again and after that just gets stuck on logo.
Now I can not update through SD card it gives error: "software install failed" a no update file message blink before error.
Phone is not recognized in adb interface anymore.
Can you guide me in details, I am new to xda and not so good in fixing phones. Your help is appreciated. Thanks.
How to enter in Fastboot...?
Click to expand...
Click to collapse
yep thats the problem i had too
... for some reason you have to plug it onto your pc to start fastboot mode
volume down and power button

Reyengine said:
yep thats the problem i had too
... for some reason you have to plug it onto your pc to start fastboot mode
volume down and power button
Click to expand...
Click to collapse
I tried this many times even connected to PC as I am using usb cable connected to PC to keep it's battery up.. but it won't go to fastboot and keeps getting into boot loop. What to do..

shahper1 said:
I tried this many times even connected to PC as I am using usb cable connected to PC to keep it's battery up.. but it won't go to fastboot and keeps getting into boot loop. What to do..
Click to expand...
Click to collapse
ok
when in bootloop hold the powerbutton til it shut off (and now i think it will reboot automatically ) --- so as soon as it vibrates and the reboot beginns hold volume down and power
if it didnt work try this
boot into (e)recovery and try to shut it off and than try to boot into fastboot

Reyengine said:
ok
when in bootloop hold the powerbutton til it shut off (and now i think it will reboot automatically ) --- so as soon as it vibrates and the reboot beginns hold volume down and power
if it didnt work try this
boot into (e)recovery and try to shut it off and than try to boot into fastboot
Click to expand...
Click to collapse
No Luck...It got into boot loader once, but not into fastboot, I tried every way you explained but nothing seems to work...
Any other way...or what I might be doing wrong...!!!
In boot loader it was showing adb interface....It is acting strange some time it takes 4, 5 attempt even to go to e-recovery...
---------- Post added at 05:46 PM ---------- Previous post was at 05:06 PM ----------
shahper1 said:
No Luck...It got into boot loader once, but not into fastboot,...
Click to expand...
Click to collapse
Let me know one thing...What screen it will show in "Fastboot"...? Blank or ......?
Thanks for staying with me...

p8 lite ale-l21
can anyone please guide me how to flash files via fastboot

Problem Solved
I was misunderstanding the Fastboot Screen of it at first but found some more important checks; thought let others know...First thank you for putting me on to right track.
You were right, to get into fastboot phone to be connected to PC with USB cable, I just changed the port to e-SATA and it got into "fastboot"... Just need to change the USB port or PC to get rid of problem of getting into fastboot.
1: I did flash by adb fastboot "Boot.img, Recovery.img, Cust.img" but System.img was giving every time error could not be done by adb fastboot. (may be size reason..!!) and did below.
2: Copied Rom "Update.app" in folder "dload" in SD card, Restarted the phone and by pressing Volume+&- on boot updated the system software...(It got error at 90% as it happened with me earlier too and saw people complaining in other forums as well.) Solution is simple..(Phone to be disconnected from PC during update through SD card..otherwise it get stuck at 90%..) I checked by force shutdown and pulling SD out and kept USB connected, it again start installation on restart but stuck again at 90%...
Updated to latest update with no problems...
Anyway, Thanks a lot for your tips which made my day...kudos..
---------- Post added at 08:13 PM ---------- Previous post was at 08:04 PM ----------
[email protected] said:
can anyone please guide me how to flash files via fastboot
Click to expand...
Click to collapse
Check this: http://forum.xda-developers.com/showthread.php?t=2131284

shahper1 said:
Problem Solved
I was misunderstanding the Fastboot Screen of it at first but found some more important checks; thought let others know...First thank you for putting me on to right track.
You were right, to get into fastboot phone to be connected to PC with USB cable, I just changed the port to e-SATA and it got into "fastboot"... Just need to change the USB port or PC to get rid of problem of getting into fastboot.
1: I did flash by adb fastboot "Boot.img, Recovery.img, Cust.img" but System.img was giving every time error could not be done by adb fastboot. (may be size reason..!!) and did below.
2: Copied Rom "Update.app" in folder "dload" in SD card, Restarted the phone and by pressing Volume+&- on boot updated the system software...(It got error at 90% as it happened with me earlier too and saw people complaining in other forums as well.) Solution is simple..(Phone to be disconnected from PC during update through SD card..otherwise it get stuck at 90%..) I checked by force shutdown and pulling SD out and kept USB connected, it again start installation on restart but stuck again at 90%...
Updated to latest update with no problems...
Anyway, Thanks a lot for your tips which made my day...kudos..
---------- Post added at 08:13 PM ---------- Previous post was at 08:04 PM ----------
Check this: http://forum.xda-developers.com/showthread.php?t=2131284
Click to expand...
Click to collapse
what do you mean by remove from pc through sd card? because when I remove usb cable, update stops and asks to restart the phone .

schahid said:
what do you mean by remove from pc through sd card? because when I remove usb cable, update stops and asks to restart the phone .
Click to expand...
Click to collapse
Phone should not be connected to PC (USB cable) while updating through SD card, that's it.

shahper1 said:
Phone should not be connected to PC (USB cable) while updating through SD card, that's it.
Click to expand...
Click to collapse
The problem is, it never starts updating when not connected to PC. as soon as I conneft it to PC and restart with volume up down and power it starts updating.
Any suggestions ?

[email protected] said:
can anyone please guide me how to flash files via fastboot
Click to expand...
Click to collapse
-first you need platform tools from the android sdk ( a folder with a few files in it)
-start cmd and navigate to that folder
-connect phone to pc and boot into fast boot
-typ in cmd 'fastboot devices' now there should come something like "0102034012011 fastboot " --- which means you phone got recognized
-download a rom and extract it with Huawei Update Extractor
-put the files boot.img, recovery.img, system.img and cust.img into the platformtools folder
-and now typ ''fastboot flash boot boot.img'' press enter and wait til its done and than the next 'fastboot flash recovery recovery.img'' and so on...

Cannot find on fastboot
Did same adb devices showing no yield, did reinstall drivers, remove install clean still not showing.
Able to get into fastboot/recovery , firmware recovery
- i tried copying P8 Lite B044 EMUI 3.1 firmware to SD but running recovery it fails at 0% "Software install failed!" on firmware recovery. FML assist please!
update-
Fastboot working tried flash recovery.img & boot.img. still going back to old recovery and not one on SD. Doing recovery gets stuck on 90% as it did with OTA update.

hey @Reyengine u used any rom for your flash for fastboot? even i dnt know my build no.

rkandroids said:
hey @Reyengine u used any rom for your flash for fastboot? even i dnt know my build no.
Click to expand...
Click to collapse
yea, i think all of them will work as long as you got the same model(ALE-L21 )
but i dont understand why someone are with dualsim and some without

C:\Users\Marek\Desktop\p8ROOT\data>fastboot flash system SYSTEM.img
error: cannot load 'SYSTEM.img'
srsl?!
---------- Post added at 04:49 PM ---------- Previous post was at 04:26 PM ----------
C:\Users\Marek\Desktop\Minimal ADB and Fastboot>fastboot flash system SYSTEM.img
target reported max download size of 471859200 bytes
sending sparse 'system' (460798 KB)...
FAILED (data transfer failure (Too many links))
finished. total time: 8.416s

qverkk said:
C:\Users\Marek\Desktop\p8ROOT\data>fastboot flash system SYSTEM.img
error: cannot load 'SYSTEM.img'
srsl?!
---------- Post added at 04:49 PM ---------- Previous post was at 04:26 PM ----------
C:\Users\Marek\Desktop\Minimal ADB and Fastboot>fastboot flash system SYSTEM.img
target reported max download size of 471859200 bytes
sending sparse 'system' (460798 KB)...
FAILED (data transfer failure (Too many links))
finished. total time: 8.416s
Click to expand...
Click to collapse
i had this problem when i flashed a stock rom on a nexus5 with the bat file ... than i flashed all files manually and it worked
but i cant help you with that one
the only thing i got in mind -- download the newest version of the android sdk to get the newest version of the platform tools
i dont even know if they were updated - maybe complete bull**** - but give it a try

Now it works, i downloaded minimal adb and fastboot 1.3.1 and flashed everything again thanks

Throws me a message ADB unauthorized devices...
I got the "update" ,Now the phone is entered in boo-tloop and can not get away from him. I tried everything .... I noticed that the problem is in the connections. My computer does not recognize the phone is in your Task Manager. Throws me a message ADB unauthorized devices... Can someone please help me ??

StrawShack said:
Did same adb devices showing no yield, did reinstall drivers, remove install clean still not showing.
Able to get into fastboot/recovery , firmware recovery
- i tried copying P8 Lite B044 EMUI 3.1 firmware to SD but running recovery it fails at 0% "Software install failed!" on firmware recovery. FML assist please!
update-
Fastboot working tried flash recovery.img & boot.img. still going back to old recovery and not one on SD. Doing recovery gets stuck on 90% as it did with OTA update.
Click to expand...
Click to collapse
Hi StrawShack, I have the same problem, I can't see the device in adb. I think I've disabled the USB debugging mode and now I don't know how to enable with the phone still bootloop.
Can't flash anything, tried to update via SD but doesn't work.
How did you get fastboot working?
---
update: Done!
connect to the PC via USB and enter in eRecovery mode (hold power button and volume up) then shutdown
disconnect USB cable, then hold volume down and plug again the USB.
at this point I still can't see the device in adb, but if you flash with fastboot it will work!

LG LGMS550 Stylo 2 Plus?

Just delete this if it's considered in the wrong place. If and when is the the Stylo 2 Plus getting its own forum and has anyone come up with an exploit for rooting this phone yet?

Hiya
Yes this is the wrong place. This is for the g stylo not the stylo 2 plus as can be seen in the name of the forum.
No there is not an exploit yet. Kingroot, kangoroot, one clove root, etc all do not work yet. Soon i would imagine
I even have trouble looking on the web for things because it seems we share a model number ms550 with the lg optimus m. Weird

You think my signature would say I probably know this. Granted, I haven't worked for them in a while, for XDA, even longer. I was talking to the mods of the forum, sorry, if I confused you.

Reserved

Root recovery and boot loader unlock have been achieved on the Gsm Variants . you can find the link if you look for it .
---------- Post added at 04:31 PM ---------- Previous post was at 04:14 PM ----------
mustangtim49 said:
You think my signature would say I probably know this. Granted, I haven't worked for them in a while, for XDA, even longer. I was talking to the mods of the forum, sorry, if I confused you.
Click to expand...
Click to collapse
http://forum.xda-developers.com/android/development/recovery-twrp-v3-lg-stylo-2-plus-t3482169/page6

Remote: unknown command
Rmontoya83 said:
Root recovery and boot loader unlock have been achieved on the Gsm Variants . you can find the link if you look for it .
---------- Post added at 04:31 PM ---------- Previous post was at 04:14 PM ----------
http://forum.xda-developers.com/android/development/recovery-twrp-v3-lg-stylo-2-plus-t3482169/page6
Click to expand...
Click to collapse
I am new here and I have also googled and searched extensively about this problem with no success.
C:\Users\Darin\Downloads\twrp>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.566s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.575s
I can't boot TWRP by command line or by recovery key sequence. I have flashed recovery with this TWRP image that I got directly from @messi2050 today, 1/18/2017. If I "adb reboot recovery", I get the Android crash screen - the android laying down, red triangle. My phone is a t-mobile stylo 2 plus K-550. I'm sure I followed every step in the process correctly. If there is another thread that addresses this problem, can you direct me to it please? I can't start my own thread because I'm too new, but the most relevant recent thread regarding this is locked. Yes I have rooted another phone before without a problem(Samsung). Thanks in advance for your help.

[email protected] said:
I am new here and I have also googled and searched extensively about this problem with no success.
C:\Users\Darin\Downloads\twrp>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.566s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.575s
I can't boot TWRP by command line or by recovery key sequence. I have flashed recovery with this TWRP image that I got directly from @messi2050 today, 1/18/2017. If I "adb reboot recovery", I get the Android crash screen - the android laying down, red triangle. My phone is a t-mobile stylo 2 plus K-550. I'm sure I followed every step in the process correctly. If there is another thread that addresses this problem, can you direct me to it please? I can't start my own thread because I'm too new, but the most relevant recent thread regarding this is locked. Yes I have rooted another phone before without a problem(Samsung). Thanks in advance for your help.
Click to expand...
Click to collapse
Install the android sdk tools with adb fastboot and drivers.
Click build number 5 times to unlock developer options
Enable usb debugging
Enable allow oem unlock
Navigate to the platform tools directory paste the recovery.img in that folder.
Hold shift key right click mouse in the said folder to open command window
Plug in the phone type adb devices
Should say lgsomthing
If it does adb reboot bootloader
Fastboot devices
Should say lg something
If it does fastboot oem unlock
Reboot the phone
Enable developer options again in the settings menu by clicking build number
Go back to command window put it back in boot loader screen type fastboot flash recovery recovery.img
Unplug phone Pull battery out once done hold vol down and power until you we the lg screen release power while holding vol down then re hold power again release both buttons
Select yes and yes to wipe phone.
Flash dm verify and super user zips
Click reboot recovery
Don't forget to format data type yes and prevail
Now click thanks!!! If I helped.

I followed all of these steps. Fastboot flash recovery recovery.img from the directory where the tools are. When I get to the part of pressing volume down, power, then releasing power, and pressing again, and releasing both this is what happens:
Factory data reset screen
Erase all user data & restore default settings?
No
Yes
I've already been through that and TWRP doesn't load if I pick Yes, it just wipes my phone data, fresh Android, start over.
Please help
Rmontoya83 said:
Install the android sdk tools with adb fastboot and drivers.
Click build number 5 times to unlock developer options
Enable usb debugging
Enable allow oem unlock
Navigate to the platform tools directory paste the recovery.img in that folder.
Hold shift key right click mouse in the said folder to open command window
Plug in the phone type adb devices
Should say lgsomthing
If it does adb reboot bootloader
Fastboot devices
Should say lg something
If it does fastboot oem unlock
Reboot the phone
Enable developer options again in the settings menu by clicking build number
Go back to command window put it back in boot loader screen type fastboot flash recovery recovery.img
Unplug phone Pull battery out once done hold vol down and power until you we the lg screen release power while holding vol down then re hold power again release both buttons
Select yes and yes to wipe phone.
Flash dm verify and super user zips
Click reboot recovery
Don't forget to format data type yes and prevail
Now click thanks!!! If I helped.
Click to expand...
Click to collapse

[email protected] said:
I followed all of these steps. Fastboot flash recovery recovery.img from the directory where the tools are. When I get to the part of pressing volume down, power, then releasing power, and pressing again, and releasing both this is what happens:
Factory data reset screen
Erase all user data & restore default settings?
No
Yes
I've already been through that and TWRP doesn't load if I pick Yes, it just wipes my phone data, fresh Android, start over.
Please help
Click to expand...
Click to collapse
Then Twrp didn't flash

Flashing
Rmontoya83 said:
Then Twrp didn't flash
Click to expand...
Click to collapse
Fastboot said it flashed successfully. It copies the file, says it's ok. I would think if it didn't flash, it would fail the fastboot flash command. So is my phone jacked? I've read about how Android can rewrite the recovery partition as a security measure, or disable flashing by other means. Some kind of added security possibly?
Why would it say OK when I flash recovery, but NOT actually flash it?

[email protected] said:
Fastboot said it flashed successfully. It copies the file, says it's ok. I would think if it didn't flash, it would fail the fastboot flash command. So is my phone jacked? I've read about how Android can rewrite the recovery partition as a security measure, or disable flashing by other means. Some kind of added security possibly?
Why would it say OK when I flash recovery, but NOT actually flash it?
Click to expand...
Click to collapse
What software version are you running?

[email protected] said:
I am new here and I have also googled and searched extensively about this problem with no success.
C:\Users\Darin\Downloads\twrp>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.566s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.575s
Wrong command your trying to boot twrp
The correct command is "fastboot flash recovery recovery.img"
Click to expand...
Click to collapse

It was something I found in another tutorial when I started trying other things, since the "fastboot flash recovery recovery.img" was not getting me past the standard Android recovery. I'm about to try the file you sent me last night. I'll let you know the result.
---------- Post added at 10:25 PM ---------- Previous post was at 10:13 PM ----------
Rmontoya83 said:
What software version are you running?
Click to expand...
Click to collapse
Android version 6.0.1
Android security patch level 2016-08-01
Kernel version 3.18.20
Windows 7 Pro x64
The recovery.img you sent also said it flashed, but I got to the same Android factory reset screen after the key press procedure (volume down, power, release power, repress power, release all)
Here's the latest:
C:\Users\Darin\Downloads\platform-tools-latest-windows\platform-tools>fastboot f
lash recovery recovery.img
target reported max download size of 536870912 bytes
sending 'recovery' (15518 KB)...
OKAY [ 0.495s]
writing 'recovery'...
OKAY [ 0.362s]
finished. total time: 0.865s

Once you boot into recovery, let the screen fully dim, do not touch it... once the screen is completely blacked out, turn it back on and all touch features will be up and running... and don't mess with the adoptable storage feature..migrating data.. because TWRP will not recognise any data if you have this enabled.

[email protected] said:
I am new here and I have also googled and searched extensively about this problem with no success.
C:\Users\Darin\Downloads\twrp>fastboot boot recovery.img
downloading 'boot.img'...
OKAY [ 0.566s]
booting...
FAILED (remote: unknown command)
finished. total time: 0.575s
I can't boot TWRP by command line or by recovery key sequence. I have flashed recovery with this TWRP image that I got directly from @messi2050 today, 1/18/2017. If I "adb reboot recovery", I get the Android crash screen - the android laying down, red triangle. My phone is a t-mobile stylo 2 plus K-550. I'm sure I followed every step in the process correctly. If there is another thread that addresses this problem, can you direct me to it please? I can't start my own thread because I'm too new, but the most relevant recent thread regarding this is locked. Yes I have rooted another phone before without a problem(Samsung). Thanks in advance for your help.
Click to expand...
Click to collapse
You have to push the ing to and directory. Fastboot push img
Sent from my LG-K550 using Tapatalk

[email protected] said:
Fastboot said it flashed successfully. It copies the file, says it's ok. I would think if it didn't flash, it would fail the fastboot flash command. So is my phone jacked? I've read about how Android can rewrite the recovery partition as a security measure, or disable flashing by other means. Some kind of added security possibly?
Why would it say OK when I flash recovery, but NOT actually flash it?
Click to expand...
Click to collapse
Are you on the newest firmware for that phone?
If you are downgrade that could be a fix to lock down the recovery

I have successfully enabled usbotg on the LG Stylo 2 plus who wants to know how I did it? Usbhost mode..mount
Usb pendrive-
Mouse
Usb hub
Keyboard...etc
They say LG STYLO 2 PLUS DOES NOT SUPPORT OTG...LIES....LIES....THEY JUST DISABLED IT...WHY?...WELL..
FOLLOW THESE STEPS TO ENABLE FULL OTG SUPPORT
1-in root explorer go to:
-/sys/devices/soc/78db000.usb/power_supply/usb/usb_otg and edit from =0 to 1save
then-/sys/devices/soc/78db000.usb/dpdm_pulldown_enable edit disabled to enable.. plug in otg cable..
Done

WoodEe23 said:
I have successfully enabled usbotg on the LG Stylo 2 plus who wants to know how I did it?
Click to expand...
Click to collapse
You enabled it by adding it to the build prop lol

Dig waaayyyy deeper ..like
/sys/devices/soc/78db000.usb/power_supply/usb/ scroll to usb_otg and edit it from disabled to enable.
Then /sys/devices/soc/78db000.usb/dpdm_pulldown_enable edit it to enabled..
VOILA!!!"PLUGIN OTG CABLE AND UR IN THERE LIKE SWIMWEAR

Need help

Hi,, I need help, don't now what to do, I run King root on my phone, xt1562, and **** up everything.... you can see in the pics.. I search, and I can find solution, so please somebody give me the solution for this problem. I tray with adb, mfasboot, rds life to refresh on lollipop without results.

Not sure if i understand your problem, but have you tried to flash twrp to be able to boot in recovery and then flash a rom

you need to unlock your device first then flash twrp recovery , and install supersu to root the device.
try this: http://forum.xda-developers.com/moto-x-play/general/untested-how-to-root-moto-x-play-t3211941

I tray that, but don't work for me, before I start with King root I alow OEM unlock on the developer settings on the phone, and now Adb don't recognize that and ask for OEM unlock, and it impossible now cos phone don't work

lapena said:
I tray that, but don't work for me, before I start with King root I alow OEM unlock on the developer settings on the phone, and now Adb don't recognize that and ask for OEM unlock, and it impossible now cos phone don't work
Click to expand...
Click to collapse
Flash factory firmware, it's pretty much the only thing you can do with locked bootloader. And don't use kingroot any more

minimale_ldz said:
Flash factory firmware, it's pretty much the only thing you can do with locked bootloader. And don't use kingroot any more
Click to expand...
Click to collapse
I try that last 7days with no success, that's why I'm posting this, if you now some link that will be great. Tnx

lapena said:
I try that last 7days with no success, that's why I'm posting this, if you now some link that will be great. Tnx
Click to expand...
Click to collapse
Did you originally have Lollipop or MM. Here's MM firmware:
If it's european XT1562, single sim, try this one:
http://www.filefactory.com/file/1ub...MPD24.107-52_cid7_subsidy-DEFAULT_CFC.xml.zip
If it's asian, dual sim, this one:
http://www.filefactory.com/file/49g...MPD24.107-70_cid7_subsidy-DEFAULT_CFC.xml.zip
(double check it, for you own safety)
Make sure you've got moto drivers and use fastboot or mfastboot.
What messages did you get when flashing before, what did it say exactly after executing fastboot commands?

Tnx
Before, phone was originally on lollipop, and receive Ota update on MM6. 0.1.
I tried to root this phone through this bull**** Kingroot.. And it failed.. Later on when i restarted the phone it got bootlooped and is totally bricked! i get this error- Startup Failed: Your device didn't start up successfully. use the software repair assistant on computer to repair your device. Connect your device to your computer to get the software repair assistant.
AP Fastboot flashmode (secure)
Fastboot Reason: Last time flashing failed
hab check failed for boot
failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation. backup to fastboot
Boot Up failed
I try with fastboot, and rds lite, computer show connection like adb devices, but when I try to flash, said failed, and rds don't show anethyng, don't recognize phone.

lapena said:
Before, phone was originally on lollipop, and receive Ota update on MM6. 0.1.
I tried to root this phone through this bull**** Kingroot.. And it failed.. Later on when i restarted the phone it got bootlooped and is totally bricked! i get this error- Startup Failed: Your device didn't start up successfully. use the software repair assistant on computer to repair your device. Connect your device to your computer to get the software repair assistant.
AP Fastboot flashmode (secure)
Fastboot Reason: Last time flashing failed
hab check failed for boot
failed to verify hab image boot
failed to validate boot image
ERROR: Failed to pass validation. backup to fastboot
Boot Up failed
I try with fastboot, and rds lite, computer show connection like adb devices, but when I try to flash, said failed, and rds don't show anethyng, don't recognize phone.
Click to expand...
Click to collapse
If you installed MM OTA you can't flash Lollipop firmware, it must be MM (generally speaking). Get into bootloader and try to flash MM with fastboot.

minimale_ldz said:
If you installed MM OTA you can't flash Lollipop firmware, it must be MM (generally speaking). Get into bootloader and try to flash MM with fastboot.[/QUOTE
Thats the problem..look at adeded pictures in first post...
Click to expand...
Click to collapse

lapena said:
Hi,, I need help, don't now what to do, I run King root on my phone, xt1562, and **** up everything.... you can see in the pics.. I search, and I can find solution, so please somebody give me the solution for this problem. I tray with adb, mfasboot, rds life to refresh on lollipop without results.
Click to expand...
Click to collapse
Check this out, this guy had the same problem and report here if it worked, it'll help others.
http://forum.xda-developers.com/showpost.php?p=68813881&postcount=43

lapena said:
minimale_ldz said:
If you installed MM OTA you can't flash Lollipop firmware, it must be MM (generally speaking). Get into bootloader and try to flash MM with fastboot.[/QUOTE
Thats the problem..look at adeded pictures in first post...
Click to expand...
Click to collapse
I can see it boots in fastboot mode, which is good, but your firmware is messed. Is your phone sim-free or carrier branded? If it's sim-free you should be able to flash the firmware I linked.
Click to expand...
Click to collapse

Tnx
Yes it's Sim free xt1562, model SM4232AD1T1, belive me I try everything, adb, or rds, or mfasboot., don't recognize device, in device list on comp. It's listed something like Fastbot lux... Windows 7.
Tnx, one more time for you will to help.

lapena said:
Yes it's Sim free xt1562, model SM4232AD1T1, belive me I try everything, adb, or rds, or mfasboot., don't recognize device, in device list on comp. It's listed something like Fastbot lux... Windows 7.
Tnx, one more time for you will to help.
Click to expand...
Click to collapse
OK, I guess you installed drivers for it, but maybe reinstall. They're here:
https://motorola-mobility-en-xp.custhelp.com/app/answers/detail/a_id/89880
Can you tell what exactly it says when you enter
Code:
fastboot devices
in command window?

Tnx
When I type that command just display some numbers... Am not at home now, so I can't post number

lapena said:
When I type that command just display some numbers... Am not at home now, so I can't post number
Click to expand...
Click to collapse
if it displays something like this:
Code:
30D41467 FASTBOOT
Then I guess you're good to go with flashing firmware

That's number and text what I got on display, but when I tray next kommand, Fastbot failed.. What to do...for example I typed command fastbot OEM fb_mode_set. On display have this line
(bootloader) slot-count:notfound
(bootloader) slot-suffix:not found
(bootloader) slot-suffix:not found
FAED(remote failure)

lapena said:
That's number and text what I got on display, but when I tray next kommand, Fastbot failed.. What to do...
Click to expand...
Click to collapse
what's the next command you try?
---------- Post added at 20:44 ---------- Previous post was at 20:32 ----------
lapena said:
That's number and text what I got on display, but when I tray next kommand, Fastbot failed.. What to do...for example I typed command fastbot OEM fb_mode_set. On display have this line
(bootloader) slot-count:notfound
(bootloader) slot-suffix:not found
(bootloader) slot-suffix:not found
FAED(remote failure)
Click to expand...
Click to collapse
Did you try to skip this one and start with flashing gpt.bin and then just do the minimum, like here:
http://forum.xda-developers.com/showpost.php?p=62708260&postcount=5
(you may have more sparsechunks to flash, so check their number)

Tnx
Of course I am, and same thing happened... I'm going crazy...

lapena said:
Of course I am, and same thing happened... I'm going crazy...
Click to expand...
Click to collapse
Did you try to skip first 2 commands (gpt and bootloader) and start from
Code:
fastboot flash logo logo.bin
?

How to uninstall CWM from Huawei P8, B200, rolled back from MM

I don't have an unlocked bootloader and i flashed the CWM. Now when i try to enter the recovery mode with buttons, nothing happens just turns the phone on normally. I searched for stock recoveries, but didn't found nothing.
I have GRA-L09, B200, Europe Open
Thanks for help!

To get an unlocked bootloader you must go to settings> about phone> build number
and then press build number 7 times
after you did that exit out of about phone then click on the newly-appeared 'developer settings'
there you should find OEM Unlocking and Enable USB Debugging
You'll get it from there.

I have the Dev Ops, but don't have OEM unlock.

But shouldn't you already have an unlocked bootloader to have DevOps?

Don't know. I don't typed any code in to unlock bootloader.

Are you sure you have DevOps?
---------- Post added at 01:58 PM ---------- Previous post was at 01:55 PM ----------
And also try to do it not with buttons, but with your computer
I don't know the script for how to boot into recovery mode but to fastboot, for example, you'd type in >fastboot
when your phone is connected to your PC via USB.
Y'know, just search up 'How to use Recovery Mode' - maybe you just did it wrong

Didn't tryed it w/ adb yet.

ADB didn't worked. I'm trying a full hard reset..

Hard reset didn't do nothing. HELP PLS!!

adb reboot-bootloader worked, but it has a subtitle: Phone Locked (with red). What is it?

TheGolem said:
adb reboot-bootloader worked, but it has a subtitle: Phone Locked (with red). What is it?
Click to expand...
Click to collapse
That means you have a locked bootloader, so CWM didn't install successfully.
In other words, you need to unlock the bootloader first in order to successfully install CWM.
So, 1st step - visit the Huawei unlocking code request page, taking your time to fill in the form accurately & submit it.
[Btw, if you don't already have a Huawei ID, you can register for one here: http://www-file.huawei.com/en/my-huawei/register
Then use these login details in the above link to request for the unlock code]
2nd step: Once you receive the unlock code from them, use it to unlock the bootloader by issuing the following command in fastboot mode [the asterisks (*) represent your 16-digit unlock code]:
Code:
fastboot oem unlock ****************
Now you can attempt to install CWM. Where are you getting the CWM img file from?

GaT7 said:
That means you have a locked bootloader, so CWM didn't install successfully.
In other words, you need to unlock the bootloader first in order to successfully install CWM.
So, 1st step - visit the Huawei unlocking code request page, taking your time to fill in the form accurately & submit it.
[Btw, if you don't already have a Huawei ID, you can register for one here: http://www-file.huawei.com/en/my-huawei/register
Then use these login details in the above link to request for the unlock code]
2nd step: Once you receive the unlock code from them, use it to unlock the bootloader by issuing the following command in fastboot mode [the asterisks (*) represent your 16-digit unlock code]:
Code:
fastboot oem unlock ****************
Now you can attempt to install CWM. Where are you getting the CWM img file from?
Click to expand...
Click to collapse
Sorry, "Phone Unlocked" with red

TheGolem said:
Sorry, "Phone Unlocked" with red
Click to expand...
Click to collapse
Ok, so it appears you may have corrupted the recovery partition.
Is the phone otherwise booting into the system & functioning normally?
Also, can you tell us what you are wanting to ultimately achieve by installing CWM?
Just to confirm the bootloader is unlocked, run this command in fastboot mode & let us know the result:
Code:
fastboot oem get-bootinfo

Ok, I just read your post in the other thread about wanting to update B200 to B370.
TheGolem said:
I have b200 but can't install it [B370]. Why?
Early flashed the CWM with flashify succesfully, but don't have unlocked bootloader. And if i try to enter recovery mode, nothing happens. Is it possible, that i cant' install it because of this?
Click to expand...
Click to collapse
As the guys already said, you do not need to install anything in order to update an official rom.
So, let's leave out CWM, bootloaders, etc for now, & help you update only from B200.
When you try using TopperBG's method to update, what happens?
What is your current FULL firmware version? It will be in this format: GRA-L09CxxxB200 - if everything else is as I've mentioned, I'm interested in the Cxxx part.

GaT7 said:
Ok, I just read your post in the other thread about wanting to update B200 to B370.
As the guys already said, you do not need to install anything in order to update an official rom.
So, let's leave out CWM, bootloaders, etc for now, & help you update only from B200.
When you try using TopperBG's method to update, what happens?
What is your current FULL firmware version? It will be in this format: GRA-L09CxxxB200 - if everything else is as I've mentioned, I'm interested in the Cxxx part.
Click to expand...
Click to collapse
Update succeed, it wroks fine. The problem is with the recovery mode.
When i'm trying the button method to enter recover, the phone just normally turns on. When still hold the buttons, black screen. It's with the abd too.

TheGolem said:
adb reboot-bootloader worked, but it has a subtitle: Phone Locked (with red). What is it?
Click to expand...
Click to collapse
you don't have a unlocked bootloader so you can't have cwm

I said it wrong:
-Android 5 succeed
-If i try to install Android 6
https://forum.xda-developers.com/huawei-p8/how-to/emui4-0-1-p8-official-marshmallow-6-0-t3417212
or enter recovery mode, then happens the black screen.

TheGolem said:
I said it wrong:
-Android 5 succeed
-If i try to install Android 6
https://forum.xda-developers.com/huawei-p8/how-to/emui4-0-1-p8-official-marshmallow-6-0-t3417212
or enter recovery mode, then happens the black screen.
Click to expand...
Click to collapse
1. You need to install stock recovery for android 5(unlocked bootloader is required).
2. Then you can use the dload method to update.
3. You can flash TWRP after that because no-one uses CWM.

GaT7 said:
Ok, so it appears you may have corrupted the recovery partition.
Is the phone otherwise booting into the system & functioning normally?
Also, can you tell us what you are wanting to ultimately achieve by installing CWM?
Just to confirm the bootloader is unlocked, run this command in fastboot mode & let us know the result:
Code:
fastboot oem get-bootinfo
Click to expand...
Click to collapse
Phone normally booting, no problem with current system.
I typed in the command, and its <waiting for device>.

GaT7 said:
Where are you getting the CWM img file from?
Click to expand...
Click to collapse
http://www.teamandroid.com/2015/06/07/install-huawei-p8-clockworkmod-recovery/2/
Step 5
cwm-p8-nogui.img

p9 lite locked in fastboot mode "Your device is booting now..."

Good evening, my device (huawei p9 lite vns l31) with PHONE Unlocked and FRP Unlock got stuck in fastboot and the firmware does not start nor goes into recovery .. the pc with adb sees the phone in fastboot mode .. how can I solve? Thanks!

domenico.velardo said:
Good evening, my device (huawei p9 lite vns l31) with PHONE Unlocked and FRP Unlock got stuck in fastboot and the firmware does not start nor goes into recovery .. the pc with adb sees the phone in fastboot mode .. how can I solve? Thanks!
Click to expand...
Click to collapse
Hello dude,
sorry if i wrote this but you posted in a wrong place.
You should have posted in questions&answers main thread,
as you can see this is guides, news and discussion thread.
Ask some moderator to move it to the correct thread ..
You could, perhaps, add some information on how the device ended up in this condition ..
What firmware was the last working?
Do you have a twrp recovery? if yes which version?

I tried to install twrp but I messed around. i tried several firmware but they didn't boot. I can't get into recovery, it just goes into fastboot

domenico.velardo said:
I tried to install twrp but I messed around. i tried several firmware but they didn't boot. I can't get into recovery, it just goes into fastboot
Click to expand...
Click to collapse
Ok Domenico,
fastboot commands should be sufficient to restore the device,
but you should say which was the last stock / custom working firmware,
(ex. VNS-L31C432B380 or ex. LineageOS 14.1) or at least the android version.... 6 / 7.
Cheers

Dadditz said:
Ok Domenico,
fastboot commands should be sufficient to restore the device,
but you should say which was the last stock / custom working firmware,
(ex. VNS-L31C432B380 or ex. LineageOS 14.1) or at least the android version.... 6 / 7.
Cheers
Click to expand...
Click to collapse
I remember VNS-L31C432B130 Android 7.0 Stock

domenico.velardo said:
I remember VNS-L31C432B130 Android 7.0 Stock
Click to expand...
Click to collapse
Domenico, this is not possible.
B130 is a basic version of android 6.
Android 7 starts from B3xx and above...
Is your device single or dual sim ?
I can provide you a firmware, but it's a bit dangerous
to use without right knowledge of actual firmware version.
Make a little effort and try to remember ..

Dadditz said:
Domenico, this is not possible.
B130 is a basic version of android 6.
Android 7 starts from B3xx and above...
Is your device single or dual sim ?
I can provide you a firmware, but it's a bit dangerous
to use without right knowledge of actual firmware version.
Make a little effort and try to remember ..
Click to expand...
Click to collapse
I have find a file in my notebook: SERVICE FULL REPAIR VNS-L31 C432B389
It could be?
My device is single sim and android 7.0 update

domenico.velardo said:
I have find a file in my notebook: SERVICE FULL REPAIR VNS-L31 C432B389
It could be?
My device is single sim and android 7.0 update
Click to expand...
Click to collapse
Hi Dom,
yes it could be, then try to download and install
twrp 3.1.1-1 by HassanMirza via fastboot commands...
fastboot flash recovery (nameofrecovery).img
Reply me when you done and keep your bootloader code handy...

Dadditz said:
Hi Dom,
yes it could be, then try to download and install
twrp 3.1.1-1 by HassanMirza via fastboot commands...
fastboot flash recovery (nameofrecovery).img
Reply me when you done and keep your bootloader code handy...
Click to expand...
Click to collapse
C:\adb\platform-tools>adb fastboot devices
adb.exe: unknown command fastboot
C:\adb\platform-tools>fastboot devices
4TE0216A22001682 fastboot
C:\adb\platform-tools>fastboot flash recovery Elite_TWRP_3.1.1.img
Sending 'recovery' (24436 KB) OKAY [ 0.768s]
Writing 'recovery' OKAY [ 0.619s]
Finished. Total time: 1.427s
Recovery correctly installed!
I have a bootloader code

domenico.velardo said:
C:\adb\platform-tools>adb fastboot devices
adb.exe: unknown command fastboot
C:\adb\platform-tools>fastboot devices
4TE0216A22001682 fastboot
C:\adb\platform-tools>fastboot flash recovery Elite_TWRP_3.1.1.img
Sending 'recovery' (24436 KB) OKAY [ 0.768s]
Writing 'recovery' OKAY [ 0.619s]
Finished. Total time: 1.427s
Recovery correctly installed!
I have a bootloader code
Click to expand...
Click to collapse
Ok Domenico, good news then...
Now between a few minutes i will provide you some links to download files
and a link with a guide to flash the firmware...

Dadditz said:
Ok Domenico, good news then...
Now between a few minutes i will provide you some links to download files
and a link with a guide to flash the firmware...
Click to expand...
Click to collapse
Thanks my friend!

Dadditz said:
Ok Domenico, good news then...
Now between a few minutes i will provide you some links to download files
and a link with a guide to flash the firmware...
Click to expand...
Click to collapse
As you told me you probably had the B389 firmware,
so i will provide you that one...
From your PC download those three files..
1 - update.zip
2 - update_data_full_public.zip
3 - update_full_VNS-L11_hw_eu.zip
Rename file 2 from update_data_full_public TO update_data_public.
Rename file 3 from update_full_VNS-L11_hw_eu TO update_all_hw.
Let file 1 the same name.
Download THIS SCRIPT (HuRUpdater0.4zip file).
Create a folder and rename it VNSL31C432B389.
Copy all 4 file you downloaded into the folder you created (VNSL31C432B389)
If you want keep TWRP (now recommended),
copy the .img file of the recovery into that folder, otherwise proceed with instruction...
Copy your VNSL31C432B389 folder into the SD card of the phone..
Reboot into the twrp, hit install, find out your folder (VNSL31C432B389),
choose only HuRUpdater0.4.zip file and let it flash.
You may have to follow some instructions on screen if needed, flashing could take many minutes, keep calm...
When rebooting, device could go in a bootloop !!!
If after 20 minutes it hadn't booted, press vol+ and power till it reboot into recovery.
Make a factory reset and everything should be good. Good luck...
I would recommend to read at least a couple of times before do... take your time...