I don't have an unlocked bootloader and i flashed the CWM. Now when i try to enter the recovery mode with buttons, nothing happens just turns the phone on normally. I searched for stock recoveries, but didn't found nothing.
I have GRA-L09, B200, Europe Open
Thanks for help!
To get an unlocked bootloader you must go to settings> about phone> build number
and then press build number 7 times
after you did that exit out of about phone then click on the newly-appeared 'developer settings'
there you should find OEM Unlocking and Enable USB Debugging
You'll get it from there.
I have the Dev Ops, but don't have OEM unlock.
But shouldn't you already have an unlocked bootloader to have DevOps?
Don't know. I don't typed any code in to unlock bootloader.
Are you sure you have DevOps?
---------- Post added at 01:58 PM ---------- Previous post was at 01:55 PM ----------
And also try to do it not with buttons, but with your computer
I don't know the script for how to boot into recovery mode but to fastboot, for example, you'd type in >fastboot
when your phone is connected to your PC via USB.
Y'know, just search up 'How to use Recovery Mode' - maybe you just did it wrong
Didn't tryed it w/ adb yet.
ADB didn't worked. I'm trying a full hard reset..
Hard reset didn't do nothing. HELP PLS!!
adb reboot-bootloader worked, but it has a subtitle: Phone Locked (with red). What is it?
TheGolem said:
adb reboot-bootloader worked, but it has a subtitle: Phone Locked (with red). What is it?
Click to expand...
Click to collapse
That means you have a locked bootloader, so CWM didn't install successfully.
In other words, you need to unlock the bootloader first in order to successfully install CWM.
So, 1st step - visit the Huawei unlocking code request page, taking your time to fill in the form accurately & submit it.
[Btw, if you don't already have a Huawei ID, you can register for one here: http://www-file.huawei.com/en/my-huawei/register
Then use these login details in the above link to request for the unlock code]
2nd step: Once you receive the unlock code from them, use it to unlock the bootloader by issuing the following command in fastboot mode [the asterisks (*) represent your 16-digit unlock code]:
Code:
fastboot oem unlock ****************
Now you can attempt to install CWM. Where are you getting the CWM img file from?
GaT7 said:
That means you have a locked bootloader, so CWM didn't install successfully.
In other words, you need to unlock the bootloader first in order to successfully install CWM.
So, 1st step - visit the Huawei unlocking code request page, taking your time to fill in the form accurately & submit it.
[Btw, if you don't already have a Huawei ID, you can register for one here: http://www-file.huawei.com/en/my-huawei/register
Then use these login details in the above link to request for the unlock code]
2nd step: Once you receive the unlock code from them, use it to unlock the bootloader by issuing the following command in fastboot mode [the asterisks (*) represent your 16-digit unlock code]:
Code:
fastboot oem unlock ****************
Now you can attempt to install CWM. Where are you getting the CWM img file from?
Click to expand...
Click to collapse
Sorry, "Phone Unlocked" with red
TheGolem said:
Sorry, "Phone Unlocked" with red
Click to expand...
Click to collapse
Ok, so it appears you may have corrupted the recovery partition.
Is the phone otherwise booting into the system & functioning normally?
Also, can you tell us what you are wanting to ultimately achieve by installing CWM?
Just to confirm the bootloader is unlocked, run this command in fastboot mode & let us know the result:
Code:
fastboot oem get-bootinfo
Ok, I just read your post in the other thread about wanting to update B200 to B370.
TheGolem said:
I have b200 but can't install it [B370]. Why?
Early flashed the CWM with flashify succesfully, but don't have unlocked bootloader. And if i try to enter recovery mode, nothing happens. Is it possible, that i cant' install it because of this?
Click to expand...
Click to collapse
As the guys already said, you do not need to install anything in order to update an official rom.
So, let's leave out CWM, bootloaders, etc for now, & help you update only from B200.
When you try using TopperBG's method to update, what happens?
What is your current FULL firmware version? It will be in this format: GRA-L09CxxxB200 - if everything else is as I've mentioned, I'm interested in the Cxxx part.
GaT7 said:
Ok, I just read your post in the other thread about wanting to update B200 to B370.
As the guys already said, you do not need to install anything in order to update an official rom.
So, let's leave out CWM, bootloaders, etc for now, & help you update only from B200.
When you try using TopperBG's method to update, what happens?
What is your current FULL firmware version? It will be in this format: GRA-L09CxxxB200 - if everything else is as I've mentioned, I'm interested in the Cxxx part.
Click to expand...
Click to collapse
Update succeed, it wroks fine. The problem is with the recovery mode.
When i'm trying the button method to enter recover, the phone just normally turns on. When still hold the buttons, black screen. It's with the abd too.
TheGolem said:
adb reboot-bootloader worked, but it has a subtitle: Phone Locked (with red). What is it?
Click to expand...
Click to collapse
you don't have a unlocked bootloader so you can't have cwm
I said it wrong:
-Android 5 succeed
-If i try to install Android 6
https://forum.xda-developers.com/huawei-p8/how-to/emui4-0-1-p8-official-marshmallow-6-0-t3417212
or enter recovery mode, then happens the black screen.
TheGolem said:
I said it wrong:
-Android 5 succeed
-If i try to install Android 6
https://forum.xda-developers.com/huawei-p8/how-to/emui4-0-1-p8-official-marshmallow-6-0-t3417212
or enter recovery mode, then happens the black screen.
Click to expand...
Click to collapse
1. You need to install stock recovery for android 5(unlocked bootloader is required).
2. Then you can use the dload method to update.
3. You can flash TWRP after that because no-one uses CWM.
GaT7 said:
Ok, so it appears you may have corrupted the recovery partition.
Is the phone otherwise booting into the system & functioning normally?
Also, can you tell us what you are wanting to ultimately achieve by installing CWM?
Just to confirm the bootloader is unlocked, run this command in fastboot mode & let us know the result:
Code:
fastboot oem get-bootinfo
Click to expand...
Click to collapse
Phone normally booting, no problem with current system.
I typed in the command, and its <waiting for device>.
GaT7 said:
Where are you getting the CWM img file from?
Click to expand...
Click to collapse
http://www.teamandroid.com/2015/06/07/install-huawei-p8-clockworkmod-recovery/2/
Step 5
cwm-p8-nogui.img
Related
Mod information 2018-07-29
This method described below is outdated and following the guide might end in a bootloop if users are currently using the latest firmware.
This is a guide on how to root the HTC One M9.
Your M9 must have an unlocked bootloader. There is currently not a way to unlock the bootloader, so unless your phone comes with an unlocked bootloader, you will need to wait until HTC updates www.htcdev.com to unlock the M9 bootloader.
Video Guide: Video
Link to the correct TWRP to use thread by Captain_Throwback READ DISCLAIMERS!: http://forum.xda-developers.com/one-m9/orig-development/recovery-twrp-touch-recovery-t3066720
Link to TWRP page in general: http://twrp.me/devices/htconem9.html
Link to correct SuperSU to flash: http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Unlocking the bootloader. (Thanks -markus-)
- Login into HTCdev
- Unlock Bootloader
- Get Started
- On "Select Your Device" Select "All Other Supported Models"
- Begin Unlock Bootloader
- Legal Terms "Proceed to Unlock Instructions
- On Phone pressing Volume Down + press Power to boot in "HTC download mode" (black Background)
- Connect Phone via USB
- CMD: fastboot oem get_identifier_token
- Copy and paste the token in Textfield "My Device Identifier Token:"
- You will receive an Email with "Unlock_code.bin
- CMD: fastboot flash unlocktoken Unlock_code.bin
- Press Volume Button to secelt Yes for Unlock bootloader
If your bootloader is unlocked, follow these steps.
Download and install ADB/Fastboot using 15 second ADB/Fastboot installer.
Plug in the One M9, enable USB debugging.
Open up command prompt, type
Code:
adb devices
Code:
adb reboot download
Code:
fastboot flash recovery C:\Users\XDADev\Downloads\TWRP.img
Replace C:\Users\XDADev\Downloads\TWRP.img with the path where the twrp.img is located for you.
Power off your device. Now, to boot into recovery mode.
Press and hold Volume Down button, then press the Power button to switch on your phone and release it, but keep holding the Volume Down button.
Select boot to recovery on the screen that appears(bootloader)
Download SuperSU.zip
Make sure you have an SD Card in your phone, then do
Code:
adb push C:\Users\XDADev\Downloads\UPDATE-SuperSU-v2.46.zip /sdcard
Once again, replace C:\Users\XDADev\Downloads\UPDATE-SuperSU-v2.46.zip with your path.
On your device, click Install, then at the top of the screen it should say Internal Storage or SDCard. If it does not say SD Card, click it and change it to SD Card.
Now find SuperSU.zip, click on it, and swipe to flash it.
Once SuperSU is done flashing reboot the phone, and open up SuperSU. You are now rooted!
If this helped you, feel free to click Thanks below.
Awesome! Thanks, I'll get a quick tutorial video up once I get my hands on an M9
FYI I'm pretty sure you can't root with the version of TWRP that's currently uploaded. It doesn't have writing to the system partition enabled. If you look in the recovery fstab, system is mounted as emmc.
You'll have to wait until an alternate version is uploaded for this to work. Someone will need to confirm whether rooting will completely break the ability to take an OTA too.
EDIT: There's also this disclaimer on the device page: "NOTE: Installing TWRP can break your ability to receive updates from HTC."
EDIT 2: The other question is whether unlocking the device will allow system to be written to at all in the OS, or only while in recovery. I think once some people have the device in their hands, some of these questions can finally be answered.
Captain_Throwback said:
FYI I'm pretty sure you can't root with the version of TWRP that's currently uploaded. It doesn't have writing to the system partition enabled. If you look in the recovery fstab, system is mounted as emmc.
You'll have to wait until an alternate version is uploaded for this to work. Someone will need to confirm whether rooting will completely break the ability to take an OTA too.
EDIT: There's also this disclaimer on the device page: "NOTE: Installing TWRP can break your ability to receive updates from HTC."
EDIT 2: The other question is whether unlocking the device will allow system to be written to at all in the OS, or only while in recovery. I think once some people have the device in their hands, some of these questions can finally be answered.
Click to expand...
Click to collapse
Test devices are S-OFF.....but bootloader locked. Go figure.
I have a t mobile M9 rooted
Hello I was able to unlock the bootloader from dev site and was able to install TWRP. I was able to install super SU and now i'm rooted!
here is my reddit post. http://www.reddit.com/r/htcone/comments/303ys2/just_got_my_hands_on_a_tmobile_htc_m9/
Worked for me
But to flash successfull recovery you have to boot to "htc download mode", the black background!
If you see white background you are on bootloader, here you are not able to flash TWRP Recovery, you will get the message "FAILED (remote: cannot flash this partition in s-on state)"
So boot to "download mode" an it work
trying this tomorrow.
Is there any way to virginize the device if I don't want it to be rooted anymore ?
DroidShift79 said:
trying this tomorrow.
Is there any way to virginize the device if I don't want it to be rooted anymore ?
Click to expand...
Click to collapse
Pull the stock recovery image before you flash TWRP. I neglected to do so (but I do have my Verizon device rooted with TWRP.
One problem, TWRP can't read or write to encrypted sdcards, either internal or removable.
My name is Harold and I'm a flashaholic.....
-markus- said:
Worked for me
But to flash successfull recovery you have to boot to "htc download mode", the black background!
If you see white background you are on bootloader, here you are not able to flash TWRP Recovery, you will get the message "FAILED (remote: cannot flash this partition in s-on state)"
So boot to "download mode" an it work
Click to expand...
Click to collapse
Markus, what device do you have.. international, verizon?
k1moe said:
Markus, what device do you have.. international, verizon?
Click to expand...
Click to collapse
I got it from O2 Germany CID is O2_102
Three questions:
1. Do I really have to buy an SD card to do this?
2. How do you boot to download mode?
3. Should the bootloader be unlocked before or after installing TWRP and rooting, or does it not matter?
1. Every XDA developer has one..
2. Choose REBOOT from the shut down menu, then when display turns black - press and hold hardware button volume - ..
3. That will save you from frustration..
jauhien said:
3. That will save you from frustration..
Click to expand...
Click to collapse
Thanks. You mean unlock bootloader first right?
-markus- said:
I got it from O2 Germany CID is O2_102
Click to expand...
Click to collapse
Um.. how do you have unlocked your bootloader? I got my M9 from Vodafone Germany (retail unit) and via HTCdev im not able to unlock BL
This will work on the u.s. m9 versions? Thanks
Sent from my SM-N910T using XDA Free mobile app
xda23 said:
This will work on the u.s. m9 versions? Thanks
Sent from my SM-N910T using XDA Free mobile app
Click to expand...
Click to collapse
The TWRP *should* work on all variants. Only way to know for sure is to try it .
k1moe said:
Um.. how do you have unlocked your bootloader? I got my M9 from Vodafone Germany (retail unit) and via HTCdev im not able to unlock BL
Click to expand...
Click to collapse
- Login into HTCdev
- Unlock Bootloader
- Get Started
- on "Select Your Device" i used "All Other Supported Models"
- Begin Unlock Bootloader
- Legal Terms "Proceed to Unlock Instructions
- On Phone pressing Volume Down + press Power to boot in "HTC download mode" (black Background)
- Connect Phone via USB
- CMD: fastboot oem get_identifier_token
- Copy and paste the token in Textfield "My Device Identifier Token:"
- You will receive an Email with "Unlock_code.bin
- CMD: fastboot flash unlocktoken Unlock_code.bin
- Press Volume Button to secelt Yes for Unlock bootloader
- thats it
I hope i could help you
Unlocked the bootloader and flashed TWRP...
SuperSU 2.46 isn't getting root...
When flashing it appears to be successful...
But then when the phone reboots there is no root access...
SuperSU - gives this error
If you just upgraded to Android 5.0, you need to manually re-root - consult the relevant forums for your device!
Anyone else have this problem or know a workaround.
jbm76 said:
Unlocked the bootloader and flashed TWRP...
SuperSU 2.46 isn't getting root...
When flashing it appears to be successful...
But then when the phone reboots there is no root access...
SuperSU - gives this error
If you just upgraded to Android 5.0, you need to manually re-root - consult the relevant forums for your device!
Anyone else have this problem or know a workaround.
Click to expand...
Click to collapse
How did you install SuperSU?
I put the Zip-File on internal Storage and boot from recovery and installed it.
I did not use the way about "adb push SuperSU-v2.46.zip /sdcard" because i don't have an SD-Card at moment.
-markus- said:
How did you install SuperSU?
I put the Zip-File on internal Storage and boot from recovery and installed it.
I did not use the way about "adb push SuperSU-v2.46.zip /sdcard" because i don't have an SD-Card at moment.
Click to expand...
Click to collapse
same as you did...
Hello guys. Before you proceed, I'll let you know that I don't own this device. Theoretically these steps should work.
1. Unlock bootloader
Go to settings>about, tap build number 7 times. This enables developer options. Here, select allow OEM unlock and USB debugging. Reboot in fastboot mode (power+vol down). Then go to this site
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
And follow the instructions. They are pretty straightforward.
2. Install TWRP
Go to
http://lenovo-forums.ru/topic/22535-moto-m-kastomnoe-rekaveri-twrp-otklyuchenie-shifrovaniya/
And download TWRP_Moto_M.img and boot_M_S124.img
In fastboot mode type fastboot flash boot <the name of the latter file image, just drag it into the CMD window from adb and fastboot folder> then type fastboot flash recovery <TWRP file>
Then type fastboot boot <TWRP file> and voila, you are booted in custom recovery.
IMPORTANT: FOR ALL THAT IS GOOD AND FAIR, MAKE A BACKUP OF EVERY FOLDER. IF YOU MESS UP SOMEWHERE, I WON'T BE ABLE TO HELP YOU!!
Now you may proceed to rooting procedures.
Tell me if this works. And before asking any questions in this thread, use the DAMN INTERNET; Google or Bing or Yahoo, whatever floats your boat
Reserved
If you are unsure of any step, and Google does not help, ask it in this thread and wait for my reply
Hi can u pls tell how to do this in XT 1663... Tried to enter bootloader mode but no luck
nanchilanto said:
Hi can u pls tell how to do this in XT 1663... Tried to enter bootloader mode but no luck
Click to expand...
Click to collapse
Search in google `lenovo forum 772 moto m`
jcanilkumarjc said:
Search in google `lenovo forum 772 moto m`
Click to expand...
Click to collapse
I tried tat but it boots normally only , OEM unlocking is switched on too , USB debugging is also turned on. Will give a shot connecting thrh PC . Anyways tnx for the response
Can we enable Mediatek Clear Motion feature in Moto M XT1663 ? Please kindly help me
Thanks!
If someone has been able to root the device successfully, do share with me the system and boot backup made in twrp. I will try bringing up a ROM.
For unlocking just enable it in developers and then
fastboot oem unlock
Guys, I'm I did a ****ty thing and my M got locked up. I did 'fastboot oem lock'. It said press volume up to lock/ volume down to cancel, pressed volume up. It said lock success. I can't even open recovery mode/ fastboot mode to flash something. Please help!
It keeps on rebooting after the 'Lenovo' logo.
sreenivas134 said:
Guys, I did a ****ty thing and my M got locked up. I did 'fastboot oem lock'. It said press volume up to lock/ volume down to cancel, pressed volume up. It said lock success. I can't even open recovery mode/ fastboot mode to flash something. Please help!
It keeps on rebooting after the 'Lenovo' logo.
Click to expand...
Click to collapse
I've flashed the stock ROM using sp flash tool. It has resolved the issue. Thanks...
---------- Post added at 11:04 AM ---------- Previous post was at 11:03 AM ----------
sreenivas134 said:
Guys, I did a ****ty thing and my M got locked up. I did 'fastboot oem lock'. It said press volume up to lock/ volume down to cancel, pressed volume up. It said lock success. I can't even open recovery mode/ fastboot mode to flash something. Please help!
It keeps on rebooting after the 'Lenovo' logo.
Click to expand...
Click to collapse
I've flashed stock ROM using sp flash tool. It has resolved the issue. Thanks...
sreenivas134 said:
I've flashed the stock ROM using sp flash tool. It has resolved the issue. Thanks...
---------- Post added at 11:04 AM ---------- Previous post was at 11:03 AM ----------
I've flashed stock ROM using sp flash tool. It has resolved the issue. Thanks...
Click to expand...
Click to collapse
Can you pls gimme the download link and the steps to flash the stock firmware ? I updated to nougat and flashed the wrong version of boot.IMG and the phone stays at your phone will reboot in 5 seconds
nanchilanto said:
Can you pls gimme the download link and the steps to flash the stock firmware ? I updated to nougat and flashed the wrong version of boot.IMG and the phone stays at your phone will reboot in 5 seconds
Click to expand...
Click to collapse
You can find the stock firmware here!
https://mega.nz/#!fcoS2SII!ipO0YBudxaTnF7XVdqjEMwByJmn95p-K4A2mHrY-DvE
sreenivas134 said:
You can find the stock firmware here!
https://mega.nz/#!fcoS2SII!ipO0YBudxaTnF7XVdqjEMwByJmn95p-K4A2mHrY-DvE
Click to expand...
Click to collapse
Password ?????????????????????
Moto M - Unlock bootloader
mrinmaydhar said:
Hello guys. Before you proceed, I'll let you know that I don't own this device. Theoretically these steps should work.
1. Unlock bootloader
Go to settings>about, tap build number 7 times. This enables developer options. Here, select allow OEM unlock and USB debugging. Reboot in fastboot mode (power+vol down). Then go to this site
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
And follow the instructions. They are pretty straightforward
Click to expand...
Click to collapse
The wrong way to go.
Follow these steps:
In Windows command prompt write adb reboot bootloader. The device will reboot into fastboot.
The following command - fastboot oem unlock. You will be prompted on the phone screen, volume up to confirm, down to refuse. Who decided to change his mind
I waited a few seconds and at the command prompt, I got the answer - OK.
Disconnect the cable from the phone and hold the power button reboot the phone and put aside. He will restart another 2 times, will go to the drain recovery and erase all data from your phone. Therefore, I recommend to make a backup.
You just have to wait to boot the phone. approximately 5-7 minutes.
The bootloader is unlocked.
BOPOH'Ok said:
The wrong way to go.
Click to expand...
Click to collapse
So what's wrong with what I posted? Just wanted to know, so that I can update the OP.
mrinmaydhar said:
So what's wrong with what I posted? Just wanted to know, so that I can update the OP.
Click to expand...
Click to collapse
That's just the point, that you give the wrong information.
You give a link to the unlocking of MOTO devices on the Qualcomm processor, and that method is not suitable for MTK.
I also laid out 100% working instructions.
problem
bro i am unlocking the bootloader it boots to bootloader then it asks for yes to unlocking the bootloader in phone it says volume up to yes or volume down to NO i press volume but it automatically cancelled what to do man
I installed Android O DP2 update via OTA yesterday. The phone updated, rebooted to the new build and restarted abruptly and since then has been stuck in a boot loop. The Google logo shows up, goes to the android animation step and then Google logo appears again.
I don't have bootloader unlocked, don't have TWRP and have done OTA updates. I am able to get into the stock recovery mode.
How do I fix this, i.e. make it work in any way without erasing the user data? I don't mind extreme steps (without erasing user data) because I was planning to reflash 7 with unlocking & rooting today.
Try to wipe cache from recovery - in recovery hold volume-down and select "Wipe cache partition". Should do the trick
I tried, didn't work. Had to factory reset in the end. Also opted out of beta
I just read that some people that took the update from certain builds had boot loops due to the update only replacing part of the OS but leaving the 7.x.x system in place causing it to boot loop. I think it was like on android authority or something like that.
Sent from my Nexus 6P using XDA-Developers Legacy app
I have similar problem. Phone became stuck at Google logo and bootloop. I didn't have OEM unlock and debugged enable when phone was working. Now I'm stuck because It cannot flash with any factory image rom. Anyone with solution, please help. Thanks
citifone said:
I have similar problem. Phone became stuck at Google logo and bootloop. I didn't have OEM unlock and debugged enable when phone was working. Now I'm stuck because It cannot flash with any factory image rom. Anyone with solution, please help. Thanks
Click to expand...
Click to collapse
You can unlock your bootloader to flash a stock ROM. Do you need the steps?
---------- Post added at 09:54 AM ---------- Previous post was at 09:38 AM ----------
citifone said:
I have similar problem. Phone became stuck at Google logo and bootloop. I didn't have OEM unlock and debugged enable when phone was working. Now I'm stuck because It cannot flash with any factory image rom. Anyone with solution, please help. Thanks
Click to expand...
Click to collapse
To flash a system image:
Download the latest system image for your Nexus 6p, then unzip it to a safe directory.
https://dl.google.com/dl/android/aosp/angler-n2g47o-factory-dc258043.zip
or Download any of your choice from here
https://developers.google.com/android/images
Connect your device to your computer over USB.
Start the device in fastboot mode with one of the following methods:
adb tool
http://developer.android.com/tools/help/adb.html
Using a key combo: Turn the device off, then turn it on and immediately hold down the relevant key combination for your device.
POWER BUTTON + VOLUME DOWN BUTTON
Click to expand...
Click to collapse
If necessary, unlock the device's bootloader using one of the following methods:
Code:
fastboot flashing unlock
If you are updating an older device, run this command:
Code:
fastboot oem unlock
The target device will show you a confirmation screen. (This erases all data on the target device.)
Open a terminal and navigate to the unzipped system image directory or Open a command prompt from within your System image folder (navigate to where you have flash-all.bat located on your PC, shift + right click anywhere within that folder, select open command prompt here
Execute the flash-all script.
Code:
fastboot flash-all.bat
This script installs the necessary bootloader, baseband firmware(s), and operating system.
Once the script finishes, your device reboots. You should now lock the bootloader for security:
Start the device in fastboot mode again, as described above.
Execute:
Code:
fastboot flashing lock
or, for older devices, run:
Code:
fastboot oem lock
Locking bootloader will wipe the data on some devices. After locking the bootloader, if you want to flash the device again, you must run fastboot oem unlock again, which will wipe the data.
Mavelos said:
You can unlock your bootloader to flash a stock ROM. Do you need the steps?
---------- Post added at 09:54 AM ---------- Previous post was at 09:38 AM ----------
To flash a system image:
Download the latest system image for your Nexus 6p, then unzip it to a safe directory.
https://dl.google.com/dl/android/aosp/angler-n2g47o-factory-dc258043.zip
or Download any of your choice from here
https://developers.google.com/android/images
Connect your device to your computer over USB.
Start the device in fastboot mode with one of the following methods:
adb tool
http://developer.android.com/tools/help/adb.html
Using a key combo: Turn the device off, then turn it on and immediately hold down the relevant key combination for your device.
If necessary, unlock the device's bootloader using one of the following methods:
Code:
fastboot flashing unlock
If you are updating an older device, run this command:
Code:
fastboot oem unlock
The target device will show you a confirmation screen. (This erases all data on the target device.)
Open a terminal and navigate to the unzipped system image directory or Open a command prompt from within your System image folder (navigate to where you have flash-all.bat located on your PC, shift + right click anywhere within that folder, select open command prompt here
Execute the flash-all script.
Code:
fastboot flash-all.bat
This script installs the necessary bootloader, baseband firmware(s), and operating system.
Once the script finishes, your device reboots. You should now lock the bootloader for security:
Start the device in fastboot mode again, as described above.
Execute:
Code:
fastboot flashing lock
or, for older devices, run:
Code:
fastboot oem lock
Locking bootloader will wipe the data on some devices. After locking the bootloader, if you want to flash the device again, you must run fastboot oem unlock again, which will wipe the data.
Click to expand...
Click to collapse
Thanks for your reply..But you can only do this only if you have an unlocked bootloader and debugged mode on. I didn't have either so it won't allow to flash with locked bootloader.
citifone said:
Thanks for your reply..But you can only do this only if you have an unlocked bootloader and debugged mode on. I didn't have either so it won't allow to flash with locked bootloader.
Click to expand...
Click to collapse
Exactly why i posted that. You can unlock your bootloader without turning USB debugging ON. Just Boot up with the POWER + VOLUME down Combination and use the bootloader unlock command in my previous post.
FAILED (remote: OEM unlock is not allowed)
Mavelos said:
Exactly why i posted that. You can unlock your bootloader without turning USB debugging ON. Just Boot up with the POWER + VOLUME down Combination and use the bootloader unlock command in my previous post.
Click to expand...
Click to collapse
What I think he is telling you and the same problem I have, when We try the unlock command we are getting this error :
FAILED (remote: OEM unlock is not allowed)
any suggestions ?
Regards.
Lord Aguacate said:
What I think he is telling you and the same problem I have, when We try the unlock command we are getting this error :
FAILED (remote: OEM unlock is not allowed)
any suggestions ?
Regards.
Click to expand...
Click to collapse
Yes, I got the same error. Again, it's because of bootloader locked and debug is off. Any other ways to unlock or flash this phone?
citifone said:
Yes, I got the same error. Again, it's because of bootloader locked and debug is off. Any other ways to unlock or flash this phone?
Click to expand...
Click to collapse
To unlock you first need to have ticked the allow OEM unlock from developer menu within the OS. It won't work otherwise.
Lord Aguacate said:
What I think he is telling you and the same problem I have, when We try the unlock command we are getting this error :
FAILED (remote: OEM unlock is not allowed)
any suggestions ?
Regards.
Click to expand...
Click to collapse
You'll have to use a Rescue OTA
Download the latest Nexus 6P OTA from here https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
STEPS TO FOLLOW
To apply an OTA update image:
Download the appropriate update image for your device below.
https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
Boot into your recovery from fastboot
use the key combination for your device
Code:
POWER + VOLUME DOWN
and then select the Recovery option from the bootloader menu. The device is now in recovery mode and an Android logo with red exclamation mark should appear on screen.
Hold the Power button and press Volume Up once, and a menu will appear. Select the option Apply update from ADB.
Run the following command on your PC:
Code:
adb devices
and check that your device shows up with "sideload" next to its name.
Run the following command:
Code:
adb sideload ota_file.zip
where ota_file.zip is the name of the file you have downloaded and verified.
Once the update finishes, reboot the phone by choosing Reboot system now.
Mavelos said:
You'll have to use a Rescue OTA
Download the latest Nexus 6P OTA from here [="https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip"]https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
STEPS TO FOLLOW
To apply an OTA update image:
Download the appropriate update image for your device below.
="https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip"]https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
Boot into your recovery from fastboot
use the key combination for your device
Code:
POWER + VOLUME DOWN
and then select the Recovery option from the bootloader menu. The device is now in recovery mode and an Android logo with red exclamation mark should appear on screen.
Hold the Power button and press Volume Up once, and a menu will appear. Select the option Apply update from ADB.
Run the following command on your PC:
Code:
adb devices
and check that your device shows up with "sideload" next to its name.
Run the following command:
Code:
adb sideload ota_file.zip
where ota_file.zip is the name of the file you have downloaded and verified.
Once the update finishes, reboot the phone by choosing Reboot system now.
Click to expand...
Click to collapse
Dear Mavelos,
I already tried that and the installation was successful, but my first problem still there, when I installed the Android O Beta, the touch of my screen stop working after the 2nd day of installation.
Now I don't know if this is a problem with Android O or just a coincidence and the hardware its broken.
I went to a lot of forums but nobody its talking about that (Touch Screen not working)
Did You guys hear anything about it?
Mavelos said:
You'll have to use a Rescue OTA
Download the latest Nexus 6P OTA from here https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
STEPS TO FOLLOW
To apply an OTA update image:
Download the appropriate update image for your device below.
https://dl.google.com/dl/android/aosp/angler-ota-n2g47o-ec3f4df1.zip
Boot into your recovery from fastboot
use the key combination for your device
Code:
POWER + VOLUME DOWN
and then select the Recovery option from the bootloader menu. The device is now in recovery mode and an Android logo with red exclamation mark should appear on screen.
Hold the Power button and press Volume Up once, and a menu will appear. Select the option Apply update from ADB.
Run the following command on your PC:
Code:
adb devices
and check that your device shows up with "sideload" next to its name.
Run the following command:
Code:
adb sideload ota_file.zip
where ota_file.zip is the name of the file you have downloaded and verified.
Once the update finishes, reboot the phone by choosing Reboot system now.
Click to expand...
Click to collapse
I have the same problem as others, stuck in a bootloop and had not enabled unlock in dev options. I can get to bootloader but not recovery mode (bootloops when I select this). I would love to try this OTA side load, but I can't see my device in adb. I can see it however in fastboot. Not sure how to get it up in adb....
Any help would be much appreciated.
scorneil said:
I have the same problem as others, stuck in a bootloop and had not enabled unlock in dev options. I can get to bootloader but not recovery mode (bootloops when I select this). I would love to try this OTA side load, but I can't see my device in adb. I can see it however in fastboot. Not sure how to get it up in adb....
Any help would be much appreciated.
Click to expand...
Click to collapse
If you get a bootloop when selecting recovery, try rebooting to recovery with fastboot
Code:
fastboot reboot recovery
if that doesn't work, then i think your device is bricked.
---------- Post added at 06:19 AM ---------- Previous post was at 06:16 AM ----------
Lord Aguacate said:
Dear Mavelos,
I already tried that and the installation was successful, but my first problem still there, when I installed the Android O Beta, the touch of my screen stop working after the 2nd day of installation.
Now I don't know if this is a problem with Android O or just a coincidence and the hardware its broken.
I went to a lot of forums but nobody its talking about that (Touch Screen not working)
Did You guys hear anything about it?
Click to expand...
Click to collapse
If your touch screen isn't working, it might be related to the Android O Beta you flashed. Can you boot the phone up? If you have an OTG cable, connect a mouse to your phone. Turn on OEM unlocking in developer options. Do a factory reset.
i have the same problem with this, and i cannot unlock it too, is there anyway to unlock this phone?
OTG works Perfect! But.....
Mavelos said:
If you get a bootloop when selecting recovery, try rebooting to recovery with fastboot
Code:
fastboot reboot recovery
if that doesn't work, then i think your device is bricked.
---------- Post added at 06:19 AM ---------- Previous post was at 06:16 AM ----------
If your touch screen isn't working, it might be related to the Android O Beta you flashed. Can you boot the phone up? If you have an OTG cable, connect a mouse to your phone. Turn on OEM unlocking in developer options. Do a factory reset.
Click to expand...
Click to collapse
So I Follow your suggestion and I bought the OTG adapter, works perfectly I unlocked the bootloader from the developers options, did a factory restore with a previous image, etc.... Touch still not working, I'm starting to believe this a hardware problem with the screen.... Bad Luck maybe, I don't know! ..... I will have to buy that expensive screen ($140).
Anyway thanks for the help...
Regards
Lord Aguacate said:
So I Follow your suggestion and I bought the OTG adapter, works perfectly I unlocked the bootloader from the developers options, did a factory restore with a previous image, etc.... Touch still not working, I'm starting to believe this a hardware problem with the screen.... Bad Luck maybe, I don't know! ..... I will have to buy that expensive screen ($140).
Anyway thanks for the help...
Regards
Click to expand...
Click to collapse
You're welcome. Get your phone fixed and return to the flashing community.
last night i my phone inside my freezer hehehe and this morning i tried to turn it on, and it pass the google logo boot normally but it only lasted for a few minute and then turn off and bootloop again. so i guess my 6p has a hardware faulty
Hi, I'm new to this phone. Just got it 1 week ago. I tried to find any related information on the bootloader unlock and custom recovery, but it is very limited. I think maybe this phone is not well known. I would appreciate if someone can provide me the way to unlock bootloader, flash TWRP and roots. I can't live without magisk and viper4android. Thanks.
Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !
thanks
dantonuci said:
Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !
Click to expand...
Click to collapse
Hi, I've tried numerous timed and it always won't pick up the command of unlocking bootloader. It always stay in the fastboot menu. I've toggled the 'OEM Unlock' function in the developer setting, as well as the USB debugging. Any idea why the device won't pick up that command?
Is it changing to unlock after you enter the command?
If so flash twrp then boot into recovery ...
dantonuci said:
Is it changing to unlock after you enter the command?
If so flash twrp then boot into recovery ...
Click to expand...
Click to collapse
Nope. It doesn't respond to the command in the fastboot. It just shows the fastboot menu. My adb is written 'waiting for device.... '.
Drivers , uninstall all other drivers and try please
dantonuci said:
Drivers , uninstall all other drivers and try please
Click to expand...
Click to collapse
Okay will try again
storytellerz said:
Okay will try again
Click to expand...
Click to collapse
I am also finding this message, what is its solution ???
the same recovery
dantonuci said:
Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !
Click to expand...
Click to collapse
Hi there, when I flashed the recovery that is always the stock recovery, why?
vins84 said:
Hi there, when I flashed the recovery that is always the stock recovery, why?
Click to expand...
Click to collapse
Not sure what you're asking, did you want to flash TWRP or stock? I was just giving tutorial for how to install TWRP
dantonuci said:
Here ya go,
1. Download and install minimal fastboot adb
2.Download TWRP rename it Recovery and move it to minimal fastboot adb folder
3. Unlock bootloader, in fastboot enter the following code : fastboot oem nubia_unlock NUBIA_NX595J
4. then also in fastboot: fastboot flash recovery recovery.img
5. you may need to format data in TWRP to get it to boot up !
Enjoy your new life !
Click to expand...
Click to collapse
I'm having the problem. Unlock is not sticking to unlock. The unlock works and the flash works but as soon as you try and reboot into recovery it hangs at a blank screen no twrp. Console says waiting for device and stuck. next time I go into bootloader it says locked. The count is 3 for unlock count is there a limit? 7-6-18 Nubia Z17 NX591J WIn 10.
bmaz121 said:
I'm having the problem. Unlock is not sticking to unlock. The unlock works and the flash works but as soon as you try and reboot into recovery it hangs at a blank screen no twrp. Console says waiting for device and stuck. next time I go into bootloader it says locked. The count is 3 for unlock count is there a limit? 7-6-18 Nubia Z17 NX591J WIn 10.
Click to expand...
Click to collapse
Trouble shoot and experiment with the process it will work, even if it appears not locked after reboot
dantonuci said:
Trouble shoot and experiment with the process it will work, even if it appears not locked after reboot
Click to expand...
Click to collapse
I don't understand? Appears not locked? It is locked. Now I remember when I flashed my Star N997 the developer said that there is a unlock bit that has to be turned on in the process of unlocking. I think this may be the case here since it unlocks until a reboot. I am deep concerned that after a unlock count of 3 the phone will not boot anymore. Do you know anything about these things? Another thought is does the USB C need different drivers and should it be plugged into a USB 3.0 outlet?
TWRP will flash only when it's unlocked so even if it's saying it's locked go by what you can do with TWRP
---------- Post added at 12:25 AM ---------- Previous post was at 12:24 AM ----------
I did it several times and never had a problem
i was looking for camera.apk file from Nubia Z17S phone from Stock ROM, can anyone upload it here..it should be located in system / app or app-pvt folder, you can copy using Root Explorer tool.
pls. let me know...
I'm having problems unlocking the bootloader. Has anyone got the proper TWRP for this phone? I can't find it. The one I have says FAILED (remote: Requested download size is more than max allowed). Thanks
hello links no longer works. Someone could give me back the TWRP and minimalb fastboot adb
For anyone's information, TWRP will not boot in recovery while the phone is being charged. Unplug first. You will just get a black screen.
i am also experiencing the same issue.. where can i find the drivers for this phone nx595j? or how do i uninstall the drivers for it?
---------- Post added at 01:21 AM ---------- Previous post was at 01:17 AM ----------
yo can somebody help me install a custom rom on my z17s via team viewer?? im willing to pay for your time
Hello, I was curious if anyone could help me with unbricking my phone, my phone has no custom recovery installed, the bootloader is apparently unlocked (OEM unlocking is disabled), FRP lock is enabled, I cannot flash anything (Command not allowed), relock bootloader (Root type is at risk), Unlock bootloader (Command not allowed), any help would be appreciated.
Edit: I also cannot boot a from a recovery img locally using fastboot (Command not allowed)
EDIT: Fixed it using DC Pheonix and flashing VNS-L22C636B140 OEMINFO and flashing B160
Hi, try my way. https://forum.xda-developers.com/showpost.php?p=77307223&postcount=30 Just pick CxxxBxxx that suits your model. Try to unlock bootloader again via SRKTool, I think FRP must be unlocked too...
Check this also: https://forum.xda-developers.com/huawei-p9lite/help/p9-lite-bricked-please-help-t3415275
4uvak91 said:
Hi, try my way. https://forum.xda-developers.com/showpost.php?p=77307223&postcount=30 Just pick CxxxBxxx that suits your model. Try to unlock bootloader again via SRKTool, I think FRP must be unlocked too...
Check this also: https://forum.xda-developers.com/huawei-p9lite/help/p9-lite-bricked-please-help-t3415275
Click to expand...
Click to collapse
I cannot flash anything, so any of these do not help, thanks for trying I guess
wheellzzz said:
I cannot flash anything, so any of these do not help, thanks for trying I guess
Click to expand...
Click to collapse
Are you sure you run from inside the folder where adb.exe and fastboot.exe is? Boot to bootloader and use terminal pointed to fastboot.exe. Shift+right click -> open command line here. Make sure your devices is listed: adb devices. If device is shown: adb reboot bootloader, to reboot to bootloader. If not, install adb drivers / huawei drivers.
4uvak91 said:
Are you sure you run from inside the folder where adb.exe and fastboot.exe is? Boot to bootloader and use terminal pointed to fastboot.exe. Shift+right click -> open command line here. Make sure your devices is listed: adb devices. If device is shown: adb reboot bootloader, to reboot to bootloader. If not, install adb drivers / huawei drivers.
Click to expand...
Click to collapse
Yes I am sure, also, I have no way to access ADB since there is no recovery on the phone.
Only thing I can do is boot to that eRecovery screen with the option to download, reboot or shutdown. (Automatticly goes to here), or boot to bootloader
wheellzzz said:
Yes I am sure, also, I have no way to access ADB since there is no recovery on the phone.
Only thing I can do is boot to that eRecovery screen with the option to download, reboot or shutdown. (Automatticly goes to here), or boot to bootloader
Click to expand...
Click to collapse
Well if you can access to bootloader then you able to use fastboot commands. ADB is not related to recovery anyhow, you use windows command prompt to use adb and fastboot. IF FRP is locked, unlock bootloader again. I quiet don't understand how the command are not allowed or so. You are definitely doing something wrong.
4uvak91 said:
Well if you can access to bootloader then you able to use fastboot commands. ADB is not related to recovery anyhow, you use windows command prompt to use adb and fastboot. IF FRP is locked, unlock bootloader again. I quiet don't understand how the command are not allowed or so. You are definitely doing something wrong.
Click to expand...
Click to collapse
The problem is I cannot unlock bootloader again, flash anything or boot into any image in fastboot mode, I always get "ERROR: (Command not allowed)", attempting to relock the bootloader shows "ERROR: (Root type is at risk)"
EDIT: I have done some research for the dload method, If I want to dload to hopefully fix it, I'll need VNS-L22C636B381, but the official link from the hicloud is dead, if anyone could help me with that, that'd be great.
Last EDIT: Ended up scratching the above idea as it didn't work, gritted my teeth as I bought DC Phoenix and will update if it works out with the .APP from the latest package I found on firmware finder.