Database Users

Phone getting power off with low battery dialog

Hi all, I am facing a strange problem, my phone is switching off automatically indicating low battery. However when I plug in charger battery indicator gives battery more than 50% sometimes close to 75%. I've tried a lot of ROM's mostly based on great work by Marcellusbe CM7.2 Alpha 8.3. Following are the list of ROM's I've tried and faced the same issue
GB:
AOSP GINGERBREAD STYLE ROM
CyanogenMod 7.2.0-RC3
Kyrillos' ROM 10.5
Currently Using : Pranjal's ROM
KISADWORX ROM v7.2.1
ICS:
ICS AOSP/CM9 (Alpha)
AOKP/CM9
All ROM's are fast and good, fits my requirement. But this battery off issue is there in all for me.
But battery indicator while charging in power off mode is always always showing battery level higher than 50%.
Help me out here. I need battery backup that can at least work for 1 full day.
Help me. Something is definitely wrong.
P.S. Also tried this with new battery. So no battery issue.
Using Samsung Galaxy 3 - I5801

prateek.m said:
Hi all, I am facing a strange problem, my phone is switching off automatically indicating low battery. However when I plug in charger battery indicator gives battery more than 50% sometimes close to 75%. I've tried a lot of ROM's mostly based on great work by Marcellusbe CM7.2 Alpha 8.3. Following are the list of ROM's I've tried and faced the same issue
GB:
AOSP GINGERBREAD STYLE ROM
CyanogenMod 7.2.0-RC3
Kyrillos' ROM 10.5
Currently Using : Pranjal's ROM
KISADWORX ROM v7.2.1
ICS:
ICS AOSP/CM9 (Alpha)
AOKP/CM9
All ROM's are fast and good, fits my requirement. But this battery off issue is there in all for me.
But battery indicator while charging in power off mode is always always showing battery level higher than 50%.
Help me out here. I need battery backup that can at least work for 1 full day.
Help me. Something is definitely wrong.
P.S. Also tried this with new battery. So no battery issue.
Using Samsung Galaxy 3 - I5801
Click to expand...
Click to collapse
Check the pins whivh connects battery to phone if they are as they should be
Sent from my GT-I5800 using xda premium

turboblaz said:
Check the pins whivh connects battery to phone if they are as they should be
Sent from my GT-I5800 using xda premium
Click to expand...
Click to collapse
Thanks for the help. Not exactly what I am looking for. Everything isn't always simple as it looks to.
I am posting this after trying all possibilities in past 2-3 weeks.

Same happening with me also. Specially when I am taking pictures or videos.. taking into account the battery is quite old .. but calling time is still moderate.. but gallery/camera are consuming enormous charge,,

I've also had this issue for quite some time with different ROMs. Right now I'm using Kyrillos 9.6 OC for daily use and I don't have that battery indicator jumps anymore. Maybe you can try that ROM to check if it's a software or hardware problem.

prateek.m said:
Thanks for the help. Not exactly what I am looking for. Everything isn't always simple as it looks to.
I am posting this after trying all possibilities in past 2-3 weeks.
Click to expand...
Click to collapse
Thats happening to me and i tried other battery as you did and i still had that problem. Now i found out that on of the pin that is connecting my battery is loose and bended :/ so i will wait till my bday and buy myself another phone
Sent from my GT-I5800 using xda premium

How old is ur battery..
Its going to garage.. so wake up... charge it completed on swithoff... dont use it till it is fully charged.. hope u will understand.. if u charge it as u wish at this stage.. u will be in line to purchase a new one...
No offence/defence
Sent from my GT-I5800 using xda premium

Display problem when charging

Hi i have the latest cm-10.1-20130901-NIGHTLY-find5.zip and I have problems when charging while powered off: The display stays on while charging and the telephone overheats. Are there any fixes?
Best Regards ngt

negiot said:
Hi i have the latest cm-10.1-20130901-NIGHTLY-find5.zip and I have problems when charging while powered off: The display stays on while charging and the telephone overheats. Are there any fixes?
Best Regards ngt
Click to expand...
Click to collapse
Have you seen if this is a problem with other users? I'm using PAC ROM and have the same result with the screen being lit to a black screen when powered off and charging. I'm checking now to see if it overheats. It may be(and probably is) the screen on and charging at the same time that is causing it to heat up like that. My suggestion is to not charge while powered off if you can help it. A little warm is ok, but these quad-core phones can cook when that CPU is going.. I've felt mine to the point of needing to power it off with usage in the sun making it unbearably hot. And if it's getting HOT HOT.. than yeah.
3 things you can do.
1.Charge with phone powered on.
2.Go back to stock ROM where this was not an issue.
3.Work with the devs to try and figure out what is causing it. Be prepared to provide a logcat if the problem can't be reproduced on their end.
My phone has been charging off for about 10 minutes now and it still feels a little cool to the touch. Battery is 100% full. Not sure if that makes a difference. I'll keep in on charge for another 10. I'll update this post in a little bit.
**UPDATE** Its been on the charger for 30 minutes.. no heat increase. Note* I'm running PAC ROM AOSP ROM.

Batteries always get hot if you use them while they are charging. This is slightly harmful to the battery too, but if it only happens once or twice I wouldnt worry about it.
All AOSP roms on this device so far are afflicted by this problem. Just turn your phone on first and as soon as you see the boot logo you can plug it in. You'll get used to it.

shawnbon206 said:
Batteries always get hot if you use them while they are charging. This is slightly harmful to the battery too, but if it only happens once or twice I wouldnt worry about it.
All AOSP roms on this device so far are afflicted by this problem. Just turn your phone on first and as soon as you see the boot logo you can plug it in. You'll get used to it.
Click to expand...
Click to collapse
Yeah for sure. It wasn't me with the issue but the OP.

Coreym said:
Yeah for sure. It wasn't me with the issue but the OP.
Click to expand...
Click to collapse
Sorry I didn't mean to quote you

all good my man
Sent from my Find 5 using Tapatalk 4

cyano forever
Hi have problem with the microphone and display while charnging... but I don't want go back!!! Bye ngt

Use cm10.2
Sent from my Find 5 using xda app-developers app

maxwen said:
Use cm10.2
Sent from my Find 5 using xda app-developers app
Click to expand...
Click to collapse
maxwen, does cm10.2 for find5 have deadlocks like nexus 4 does?
I am waiting for the deadlocks to stop before I upgrade.

Galaxy Note 4 extended battery incorrect reading

Hello everybody,
I own a Samsung Galaxy Note 4 N910H and an extended 9600mah battery on it.
But the issue I'm facing is that the phone does not give me the correct value of the current battery level, which can be sometimes very annoying like being stuck on 1% for a little while with no brightness.
The extended battery I have is the Kranich 9600mah Extended battery you can find its review here
I've already tried quite a few times calibrating the battery, run more than the recommended 5 cycles but I can't have the correct value of it.
So I would like to know is there a method to manually change the default value of battery capacity from stock one (3220 mah) to the correct one.
Any help would be appreciate.
My configuration
ROM : eRobot ROM v.7 (Android MM)
Kernel : H-Vitamin (3.10.9)
Battery: Kranich For Samsung Galaxy Note 4 Smart 9600mAh Extended Battery Replacement
Hope you guys can help me fix this.
Regards,

Here is the battery stats from the last cycles.
You can see more than 5 peaks on it.
For each one, the phone went down to 1% stuck there for a moment (that moment decreases progressively).
Everytime the phone turned itself off, I pulled out the battery and put it back in before restarting the it.
For the first time (meaning the second peak) the battery was at 26% after the phone boot up, the third it was at 19% etc. Until it shows 1% during the last one.
See below screenshot.

I have same phone with Kranich 9600mah Extended battery =))
I make kernel with support Extended battery
https://github.com/LukasAddon/SpaceLemon-N910H-Kernel/releases
5 days on one charge ))
View attachment 3868501

LukasAddon said:
I have same phone with Kranich 9600mah Extended battery =))
I make kernel with support Extended battery
https://github.com/LukasAddon/SpaceLemon-N910H-Kernel/releases
5 days on one charge ))
Click to expand...
Click to collapse
Woooowww this is absolutely incredable. At this moment I can only use mine for 2 days, I will flash this kernel ASAP and let fou know after using it.
Thanks a lot.

After one hour of usage with this kernel, it's not accurate yet and shows 88% after I pull out the battery and put it back in and it shows 94% which is quite a lot for an extended battery.
I'm currently on eRobot Custom ROM which is a S7 ported ROM and I plan to go back to stock ROM like Hani Base ROM maybe it will make a difference.

I have the phone in my signature (N910F) and now I'm using Emotion kernel for Zerolemon variant.
I mount a IBestwin large battery and the gauge is not accurate yet.
Probably I need to calibrate better the battery.
How is it work this kernel you made?
Sent from Note 4 device - Rome - Italy

After one day of usage starting from 65% it's pretty accurate.
I'm charging up to 100% and see how it works.
You can definitely try it.
But do remember it's d'or N910C/H and it's seems like Emotion kernel is for N910F.

@LukasAddon 87% on battery 19h remaining. This is weird.
Do I need to complete some cycles before it starts to show correct infos ?

The screen-on time has been very poor for me on spacelemon kernel but thé standby time is incredible.
If there is another kernel i'm willing to test it too.

kernel not need cycles before it starts to show correct.
when i charge buttery , it very long write on display "charging 100%" , but it is not 100%.
i wait some hours and then it write "charging complete" on lock screen and then battery is full charged
and DISABLE FAST CHARGE option in settings !!!!
try new version 2.1.0 on git hub.
https://github.com/LukasAddon/SpaceLemon-N910H-Kernel/releases/download/V2.1.0/SpaceLemon_v2.1.0.zip with Zerolemon Path
do not load SpaceLemon_Standart_Battery_v2.1.0.zip - its for standart battery
you need to install Synapse from goole play and tune kernel

LukasAddon said:
kernel not need cycles before it starts to show correct.
when i charge buttery , it very long write on display "charging 100%" , but it is not 100%.
i wait some hours and then it write "charging complete" on lock screen and then battery is full charged
and DISABLE FAST CHARGE option in settings !!!!
try new version 2.1.0 on git hub.
https://github.com/LukasAddon/SpaceLemon-N910H-Kernel/releases/download/V2.1.0/SpaceLemon_v2.1.0.zip with Zerolemon Path
do not load SpaceLemon_Standart_Battery_v2.1.0.zip - its for standart battery
you need to install Synapse from goole play and tune kernel
Click to expand...
Click to collapse
That is the version I've downloaded the 2.1.0 but I will download that Synapse application and tune the kernel. I didn't notice that the fast charging was unabled, so I will charge it again and will let you know.
Is your scrren-on time good enough ?
And is it possible to use it on custom ROM ? I was on eRobot ROM v.7 and due to overheating I flashed back a custom stock (Hani Base ROM).
One last thing, which settings do you consider the best with synapse for your Kernel ?
Thanks again for you efforts.

you can use custom rom, try first full charge buttery. and then test it.
my battery charging min 6-8 hours when i sleep )))
my 5 days on battery if i use 1.5 hours screen every day.
all default settings in synapse i put in kernel.

LukasAddon said:
you can use custom rom, try first full charge buttery. and then test it.
my battery charging min 6-8 hours when i sleep )))
my 5 days on battery if i use 1.5 hours screen every day.
all default settings in synapse i put in kernel.
Click to expand...
Click to collapse
That's what I thought for the screen-on time I will test it for this week and I will report to you how it works with screenshots.
If everything is fine and hopefully it will, I'll then try it on eRobot ROM and report again.
Thanks a lot mate for this piece of magic.

it must be fine =)))

This is what I got from the last 2 cycles, as I said previously, the standby time is absolutely incredible when the phone is idle, there is no battery pourcentage drop. But while using it, you can see the screenshots below it's a real fast drop.

I just ordered kranich 9600 mAh . My n910c is running on Erobot v11.1 MM can anyone please recomend me a good kernel to show exactly the battery percentage?

sacaitu said:
I just ordered kranich 9600 mAh . My n910c is running on Erobot v11.1 MM can anyone please recomend me a good kernel to show exactly the battery percentage?
Click to expand...
Click to collapse
You Can use SpaceLemon the dev shared the link here. I'm on eRobot 7 because the 11.1 was overheating.
As of now it has been the most accurate kernel I've used, btw the h_vitamin kernel dev said that it Will have extended battery support soon.

danecr7 said:
You Can use SpaceLemon the dev shared the link here. I'm on eRobot 7 because the 11.1 was overheating.
As of now it has been the most accurate kernel I've used, btw the h_vitamin kernel dev said that it Will have extended battery support soon.
Click to expand...
Click to collapse
Thank you m8 . I still want to not downgrade.. i think i ll wait for h- Vitamin after i try zero lemon of course.

sacaitu said:
Thank you m8 . I still want to not downgrade.. i think i ll wait for h- Vitamin after i try zero lemon of course.
Click to expand...
Click to collapse
It was the Rom that was causing overheating not the kernel, so you Can try it on eRobot v.11.1 and see how it works. Knowing that you Can go back to h_vitamin suemax etc. whenever you want.

danecr7 said:
It was the Rom that was causing overheating not the kernel, so you Can try it on eRobot v.11.1 and see how it works. Knowing that you Can go back to h_vitamin suemax etc. whenever you want.
Click to expand...
Click to collapse
No overheating here... using spacelemon with erobot v11.1 on kranich 9600

Best ROM for battery life?

I'm looking for the best ROM for battery life, I prefer android Oreo please. Any ideas? Thanks!

Friendlyx355 said:
I'm looking for the best ROM for battery life, I prefer android Oreo please. Any ideas? Thanks!
Click to expand...
Click to collapse
Aicp 13.1 , Maybe you can try stay on stock setting for few days I heard people say it's pretty good.
Another option is if you want more battery use Kernel adiutor to lower cpu max speed down for big and little core. For Aicp 13.1 there is guide from the dev (Mosimchah) on the first page of his kernel tread how to tweak for battery or performance.
LineAge 15.1 also coming together but less customization with stock kernel but it's good too for battery/performance. If you are not on your phone all day should have enough battery.

The best battery life will be with AOKP 6.1 their no ROM better!
The higher you in android the worse your battery life will be I have tried every one.
Sent from my LEX727 using xda premium

The original stock is still the best, but you are asking about ROMS.
AICP 13.1 (Oreo 8.1) is by far the best battery life for all the ROMS out of the box that still gives you proper notifications. In the past I have had to install greenify and other power saving tools. I do not have to do that with AICP.
On average I am getting 0.7%/hour drain when screen is off. Screen on time average is around 7 hours.
The ROM is still in testing stages, but it is pretty close to release.

slgooding said:
The original stock is still the best, but you are asking about ROMS.
AICP 13.1 (Oreo 8.1) is by far the best battery life for all the ROMS out of the box that still gives you proper notifications. In the past I have had to install greenify and other power saving tools. I do not have to do that with AICP.
On average I am getting 0.7%/hour drain when screen is off. Screen on time average is around 7 hours.
The ROM is still in testing stages, but it is pretty close to release.
Click to expand...
Click to collapse
Not to get in fight over this but I have test all and AOKP has battery life I have test all .
Orea still had battery drain I have tried them all.
These are from AOPK 6.1 if you have better stats post.them
The battery on AOKP is even better than stock.
Sent from my LEX720 using xda premium

mchlbenner said:
Not to get in fight over this but I have test all and AOKP has battery life I have test all .
Orea still had battery drain I have tried them all.
These are from AOPK 6.1 if you have better stats post.them
The battery on AOKP is even better than stock.
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
Hi! Can you give the aokp link you are using?

Pa77er said:
Hi! Can you give the aokp link you are using?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=70904507
Sent from my LEX720 using xda premium

Why is there still no perfect rom.
I tried all of them, none of them fit me ...
I do not want to disrespect the developers.
Aicp and omni are too slow for me. I feel like I'm using a medium and an entry-level phone when I use the device.
The paranoid rom is too fast.
But I have problems. Fingerprints do not work when I'm asleep. I have to try it all the time.
Lineageos aicp and omni talk too bad. (At the time of the call)

mchlbenner said:
Not to get in fight over this but I have test all and AOKP has battery life I have test all .
Orea still had battery drain I have tried them all.
These are from AOPK 6.1 if you have better stats post.them
The battery on AOKP is even better than stock.
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
I have seen results similar to yours depending on my usage. However, averages are much more realistic than just one time results. I have attached an image of mine over 26 sessions.

Results can different with different users but I have used every ROM plus I have experience in kernel hacking .
I should said I'm not running stock kernel it came with.
Why don't post over night sleep usage mine will go down 1% to 0% 8 hours.
You can't get that in 8.1.
My performance is the same to 8.1.
I miss flew thing that 8.1 has but I'm good performance and battery newer is not always better.
Sent from my LEX720 using xda premium

mchlbenner said:
Results can different with different users but I have used every ROM plus I have experience in kernel hacking .
I should said I'm not running stock kernel it came with.
Why don't post over night sleep usage mine will go down 1% to 0% 8 hours.
You can't get that in 8.1.
My performance is the same to 8.1.
I miss flew thing that 8.1 has but I'm good performance and battery newer is not always better.
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
Most roms are similar for functions, for Android 8.1 people like new stuff and the crazy hyped about it. For me personally I just want to try Oreo, want to know what it is like to use it. Aicp 13.1 and LigeAge 15.1 work very well, battery is plenty if you are not on your phone all day.
For battery, it means to be use/discharge that's why phone have it, how long it last just depends how you use the phone. You can't really get two days battery life with Sd820/821, you can get it with Sd625 like Redmi Note4 with 4000mAh battery. Most people carry more than one phone with them nowadays I think so no problem.

Aicp 13.1 is my preferred ROM. Graph starts at 60%. Only mobile data used, and cpu is set to 1.4 for little and 1.9 for big.

@Ace42
Performance at Aicp is much worse with hele CPU underclock.

mchlbenner said:
http://forum.xda-developers.com/showthread.php?p=70904507
Sent from my LEX720 using xda premium
Click to expand...
Click to collapse
you mean 6.0 rom or 7.1 rom ?

CuDem said:
you mean 6.0 rom or 7.1 rom ?
Click to expand...
Click to collapse
6.01 rom.
Aopk.
Sent from my SM-A730F using xda premium

I've just installed 6.01 rom Aopk on my x720 but doesen't go in 4G
I returned to my girom rom 26s-stock-based just after 1 hour
https://forum.gizchina.it/index.php?/topic/1307-gizrom-14-26s-per-leeco-le-pro-3-x720/
(i think that stock stock stock 20s in maybe better than 23s , 26s rom based ...)
I may be understood why ''6.01 rom Aopk marshmallow battery'' is good ... ,
with kernel adiutor,
I noticed that maximum high frequency was about 1800Mhz of big core ecc ecc with balance profile.
thanks by k54 (from italy)

I use miui9, and I get about 6 to 7 he screen on time easily. I had few screen shot, but ended up wiping the entire storage because of recovery issue.

Best ROM by far
Hey guys. I have been using this ROM for a month now and believe its the latest and most stable based off Leeco stock rom. I get around 5-6 hours SOT on medium to heavy use. That's with both sims on with 4G+ on all day. I have apps running all day like facebook, messenger, instagram, snapchat, skype, whatsapp, google+, outlook, gmail, aliexpress, expressvpn, spotify, teatv, youtube. Also play around 30mins of plants vs zombies and unkilled everyday.
All the features on this Cuoco92 VR4 ROM works flawlessly. Its based off the latest 28s chinese stock rom but all chinese bloatware and text has been removed. Also google playstore is preinstalled and it works without an issue.
Changelog:
- Based on official 28S
- Gapps minimal (02/2018)
- Cuoco Settings with new features
- User-Interface with toggles (check cuoco/Advanced settings)
- Dialer with large caller picture, call recording enabled for all regions, Yellopages removed (check cuoco/Advanced settings)
- Screen colors adjustments to be comfortable under the sunlight
- Updated Magisk to version 5.6.0
- New weather widget
- V4Android preinstalled
- Xposed installer
- DolbyAtmos
- Performance and battery optimizations
- New TWRP RECOVERY 3.2.1
- Removed ads from LeEco apps
- Other fixes
oint_right:__LeEco services are disabed from default. You can Enable it again from my settings.
: If you have any kind of issues, please backup your applications with TitaniumBackup and reset your device (factory reset) from TWRP.__
Factory reset required!
Install instructions
- You need to install rom via TWRP recovery. I am using version 3.0.2.0
https://forum.xda-developers.com/le-pro3/how-to/leeco-le-pro-3-root-t3476560
- make a full backup of existing rom and modem via TWRP before flashing new rom
- i installed my new rom through a usb drive using a OTG connector. Works best for me
http://4pda.ru/forum/index.php?showtopic=783366&st=2780#entry69580146
- i am also using this modem configuration as i do not get dropouts and has good signal coverage
http://4pda.ru/forum/index.php?showtopic=783366&st=2780#entry69580146
Hope this helps. Please give me some feedback. Enjoy!

Baterry of 4xl

Problem reading your battery meter

Using Bliss rom + stock kernel that comes with it. Zero tweaks on my end, day 4 on August Bliss v14.6.9. Far as I know my battery is the original OEM battery. I purchased my phone used about 11 months ago for 240 USD. Pretty good battery in my opinion.

Re
vinhmit said:
Problem reading your battery meter
Click to expand...
Click to collapse
Reboot. Should fix this I would think..

Check
https://twitter.com/i/web/status/1478404055651082247
#GoogleScam
#GoogleHarassment
#IrresponsibleGoogle
#Harassment
#Scam