Does any firmware works? - Samsung Galaxy S7 Edge Questions and Answers

Hi!
I got a 935fd S7 Edge it was shipped with the G935FXXS1APG3 firmware. It seems this one is from Egypt. Can I flash any 935F or FD firmware (from any country) or must be this and only this one?
Tnx

alehawk said:
Hi!
I got a 935fd S7 Edge it was shipped with the G935FXXS1APG3 firmware. It seems this one is from Egypt. Can I flash any 935F or FD firmware (from any country) or must be this and only this one?
Tnx
Click to expand...
Click to collapse
I have the G935F edge and it shipped with Egypt csc too. I'm trying to flash to AMO (spain) firmware with my mac using jodin but I have a few questions before I start. When I extracted the firmware, inside the firmware file is a BL and AP file. On jodin there is a BL option but no AP option to click. so im stuck. anyone out there who knows how to flash using jodin on mac could you please help?

Related

Flashing BTU on edge+ ?

Hi, my csc is XSC. If I flash the UK G928F BTU firmware will my edge+ still work like normal? My edge plus was from dubai and is the G928C model. And which odin should I use? Thanks
Nevermind
Sent from my SM-G928F using Tapatalk
bump- any suggestions/advice? thanks
hayat55 said:
Hi, my csc is XSC. If I flash the UK G928F BTU firmware will my edge+ still work like normal? My edge plus was from dubai and is the G928C model. And which odin should I use? Thanks
Click to expand...
Click to collapse
yes it will work normal
If You run into the problems while flashing firmware from other carrier it may happen that on Galaxy s6 edge plus + You will get error during flashing hidden.img file.
In that case take out hidden.img from firmware file with winrar/7zip and extract it somewhere else and rename it from hidden.img to hidden.img.tar and then restart odin and restart phone to
download mode again and select AP from Odin and choose hidden.img.tar and flash it.
It worked for me so my SM-G928C is SM-G928F.
Actualy only difference between this two phones is supported LTE bands and SM-G928C supports LTE Cat6 700/800/850/900/1700/1800/1900/2100/2600 (Bands 1,2,3,4,5,7,8,12,17,18,19,20,26) and
SM-G928F supports LTE Cat6 700/800/850/900/1700/1800/1900/2100/2600 (Bands 1,2,3,4,5,7,8,12,17,20,25,26,28).
You can find exact list of LTE bands and their frequencies at http://niviuk.free.fr/lte_band.php
It's sure to say that difference is only band 19,25,28 which is used in Japan and NAR countries.
P.S. After flashing You might need to reset to factory defaults phone at least one more time in order that CSC get's applied and 4G starts working

Bricked S7 edge! Help

Hello There , yesterday i got myself a Samsung Galaxy S7 edge and when i was trying to root it , something went wrong.I can boot in to the download mode.My model number is SM-G935FD so can i flash the firware which is made for SM-G935F?
Model-SM-G935FD
Regards,
Ranjit
Geekyranjit said:
Hello There , yesterday i got myself a Samsung Galaxy S7 edge and when i was trying to root it , something went wrong.I can boot in to the download mode.My model number is SM-G935FD so can i flash the firware which is made for SM-G935F?
Model-SM-G935FD
Regards,
Ranjit
Click to expand...
Click to collapse
Flash your same device model and CSC firmware, you could get on sammobile.com
or use samsung smart switch step by step https://www.youtube.com/watch?v=9QhJngOuLQ4
sa3d12 said:
Flash your same device model and CSC firmware, you could get on sammobile.com
Click to expand...
Click to collapse
Via Odin? Can i flash the SM-G935F firmare on SM-G35FD?
Yes, via Odin. Use the latest version of Odin.
Flash FD firmware only on your FD variant phone.

[Update: Galaxy S7 edge too!] Full Android 7.0 firmware for the Galaxy S7 now availab

The firmware are available for two regions: UK (BTU) and the Czech Republic (O2C). You can download these Nougat-based firmware files and flash your compatible Galaxy S7 models manually (you should also be able to update your device through Samsung Smart Switch on your PC). Galaxy S7 edge firmware shouldn’t be far behind, and we will be sure to let you know once those show up in our database.
For S7 Edge : https://www.sammobile.com/firmwares/download/120208/G935FXXU1DPLT_G935FOXA1DPLT_BTU/
For S7 : https://www.sammobile.com/firmwares/download/120140/G930FXXU1DPLT_G930FOXA1DPLT_BTU/
Source: sammobile.com
will it work on dual sim s7 edge (sm-g935f)
sagor1 said:
will it work on dual sim s7 edge (sm-g935f)
Click to expand...
Click to collapse
Yes
Right .. I've been reading and researching this .. but can't find a definitive answer. Perhaps one of you gurus can assist. According to Phone INFO I have the following setup:
Bootloader/PDA/Baeband Version: G935FXXU1DPLT
CSC Version: G935FOXA1DPLT
When I try to use/install the Galaxy Gear VR, I keep getting "network error". From my research, this is linked to the CSC. Question is, how do I restore it to base CSC - without rooting?
Any help would be appreciated.
Cheers.
nice. can somebody upload the firmware somewhere else cuz i have to w8 9 hours to dld from sammobile
antenehnile said:
Yes
Click to expand...
Click to collapse
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?
sagor1 said:
Thanx...
so i read on the other thread 1st i have to download mm btu rom...than i can flash this is it true?
or i just download this and flash it via odin?
Click to expand...
Click to collapse
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.
naryraza said:
The other thread was created when the full firmware was not available yet, the workaround was to flash mm btu then update to nougat. These are the nougat firmwares as they are now available, not the mm ones. so you just have to flash them and you'll have nougat on your phone.
Click to expand...
Click to collapse
Thanks Brother.
https://drive.google.com/drive/folders/0BzXXEylDgfZ0MU1EVnh3YnAtc0k
now i am downloading this (2.15gb!)....is it legit? (find it on other xda thread)
Instructions
Extract (unzip) the firmware file
Download Odin v3.11.1
Extract Odin ZIP file
Open Odin v3.11.1
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
is this right instruction?(sammobile)
Because i am so confused about cse,csx,btu......etc on the other thread
I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?
daLareid said:
I haven't flashed a different CSC cause I don't want to lose features such as the Mobile data toggle, currently on the Arab firmware since my phone is a Duos, anyone know if BTU has the Mobile data toggle even on 7.0?
Click to expand...
Click to collapse
I didn't try yet another SIM but duos options are there... so Insuppose you wont have any problem with it
Sent from SM-G935FD w/ TapaTalk

official nougat Rom not released for the duos

Hi I got the 935fd. Can i download the Rom from sammobile for 935f and flash using Odin on my 935fd?
Thanks
cyrarchy said:
Hi I got the 935fd. Can i download the Rom from sammobile for 935f and flash using Odin on my 935fd?
Thanks
Click to expand...
Click to collapse
Yes you can .Basically firmwares on sammobile for 935FD are just 935F firmwares and they can also be flashed on 935F. All these firmwares just detects for dual sim on boot and enables dual sim functions. So there is no difference between F and FD firmware they can be flashed on each other.

Sm g935u firmware on sm g935a

I have sm g935A with baseband version G935AUCU4CRE4 which i had flashed from odin months ago , i wanted to ask that can i flash g935U firmware in it and if so then which firmware i should flash it into in sammobile under the section of g935U firmware there are many firmware like USA , USA(T-MOBILE) , USA(AT&T) etc so which one should i flash it and which odin software should i use?
Beckchaos said:
I have sm g935A with baseband version G935AUCU4CRE4 which i had flashed from odin months ago , i wanted to ask that can i flash g935U firmware in it and if so then which firmware i should flash it into in sammobile under the section of g935U firmware there are many firmware like USA , USA(T-MOBILE) , USA(AT&T) etc so which one should i flash it and which odin software should i use?
Click to expand...
Click to collapse
Yes you can flash G935U on G935A using the latest version of odin. you can select any firmware of G935U. they all are same
hasni1 said:
Yes you can flash G935U on G935A using the latest version of odin. you can select any firmware of G935U. they all are same
Click to expand...
Click to collapse
So what is the difference between USA , USA(AT&T) , USA(VERIZON)
None. It's what channel they got released that file on.
hasni1 said:
Yes you can flash G935U on G935A using the latest version of odin. you can select any firmware of G935U. they all are same
Click to expand...
Click to collapse
helli mate sorry for just poping up here..
my s7edge original firmware is sm-g935a at&t 6.0 marshmallow. and then i flash it to sm-g935u 7.0 nougat..unlocked version via odin.. how can i root it now? im totally confuse.please help and give some tutorial how can i root it..thank you so much!

Categories

Resources