I know on my s4 there was a dialer code that let me choose lte only, because my phone usually doesn't connect to lte (usually hspa+) because lte is only two bars in my area even though it works perfectly fine and its double the speed of my hspa+ (40 mbps avg), so is there anyway i can force my phone to connect only to lte? (there is a 2g only mode and a wcdma only mode but no lte only mode, and i know calls dont work on lte but i dont care)
Sent from my SM-G900T using Tapatalk
*#2263# (*&band#) -> LTE Band Preference -> Any of the item
Dial *#*#4636#*#* on the dial pad, on the top right menu select the option to Select band on the next screen, select Band 6. I am constantly locked on Band 4, after making this change and my internet speeds has jumped significantly.
Please be advised, that you need reboot your phone and it might take about 15 minutes to sync your new settings to VZW servers after you make this change.
Let me know, if this helped anyone else.
I tried this and idk if it helped lol
I know Band 4 is XLTE, but what's Band 6?
Sent from my Nexus 6P using Tapatalk
In the selection band, you dont have Band 4. You need to select Band 6 from the list.
How do you see what band you're currently on?
Use LTE Discovery app.
It says it changed to band 6 but LTE discovery shows band 4 even after a reboot
It is supposed to Show Band 4 on LTE Discovery. That is good. Now do a speed test and see improvements.
no improvement here. same ping and upload speed. dropped 6Mbps on download speed.
how to i change back since there's no option for band 4 in the settings?
If you selected Band 6 in that Menu, that should connect u to Band 4 or Band 13 on Verizon. Open LTE discovery app and see which band you are connected on now.
But if you want to revert back to your previous settings.. You can do a network reset from the backup & menu option under settings.
I don't have any issues with VoLTE or speeds on Verizon.
This worked, very good! I was experiencing slow speeds, especially upload speeds and this fixed it!
How to speed up jio connection?
I am posting pre configuration also as well as in case pre configuration not work you can try at your own hit and trial method.
Pre config -
I am not providing any downloadable files or content. This process needs root and volte supported roms. Custom lineage and its based roms still can have issue. It will work best on eui roms ( stock and customs) .
App need -
Net guru (free) - download
1. Download net guru app. And give root access . It will take some time for configuration.
2. Wait untill it shows LTE testing.
3. Now go to menu and select lock bands.
4. Now select LTE and select "B3 1800+" band.
5. Restart and. Enjoy new speed.
Reason to lock only this band -
Coverage + speed too.
Check speed by trai app.
If above method don't work then follow till 3rd step and now select 3 individual bands at which jio works and check your speed at individual bands and lock them at your most preferable band.
Details about bands:
Jio is using 3 LTE bands for 4G:
Band 3 (1800Mhz),
Band 5 (850Mhz)
and Band 40 (2300Mhz)
If LTE Bands are arranged according to services then
Best 4G coverage*: Band 5 > Band 3 > Band 40
Best 4G Speed*: Band 40 > Band 3 > Band 5
Average 4G speed*: Band 40 : 30mbps+Band 3 : 14mbps+Band 5 : 5mbps+
Extra -
1. After Deleting app band locking still works.
2. Restarting doesn't affect band locking.
3. Updating roms or changing also not affect band locking.
4. It's not necessary band 3 will give you more speed or coverage try according to your area. Mine is most suitable at B3.
Working - Sim - up. Working in Delhi, haryana and up.
Post your results.
Thank you bro
If you will use this trick then you both incoming and outgoing call will not work at the time of data connection ,you have to switch to flight mode to enable again
rockingboy said:
If you will use this trick then you both incoming and outgoing call will not work at the time of data connection ,you have to switch to flight mode to enable again
Click to expand...
Click to collapse
No issue here. Receiving calls and everything working fine.
Hi everyone,
Network signal guru is not working on rooted Oneplus 5. It shows the details and all but i wanted to use its Lte Band Locking functionality. However Lte band option is not visible in the options list.
or else if anyone could point to the correct secret menu code for this phone for native lte band selection?
or some other app which can force lock onto specific lte bands on this phone?
Thanks
Hi guys,
I just got a Nokia X6 on Android One shipped from China and for some reason it defaults continuously to H+ instead of LTE on my Cricket network. On my Network Type option in the Setting In only have 3 options 2G, 3G and 4G and I have 4G selected, but still H+ is being used by default even in areas where I used to get full LTE signal.
I have tried however to get into the Android Testing Menu (by dialing *#*#4636#*#*) and change the Preferred Network Type to a few options like LTE/UMTS auto (PRL), but for some reason is the H+ that is picket all the time. even in areas where I know the LTE signal is strong. If I select "LTE only" from that menu, then I'm getting on LTE but as soon as I go into weak signal region, the signal drops completely, while not the same thing I can say about the other option, when the H+ connection is present in the same weak signal area.
Another thing that I see in the Android Testing Menu is that my VoLTE provisioned option is Off and I can turn it on.
Do you guys have any ideas on how can I get this device connected to LTE when the signal is strong?
I have a Nokia X6. I put two SIMs into it, both show 4G.
I have some problem to connect data or mobile internet. Grammen phone provider.
I was ready to purchase one, however, was curious if this would work on t-mobile. If so, would the Wi-Fi calling work?
Did you already checked if your 4g network band compatible with your phone?
Gin.Or.Juice said:
Hi guys,
I just got a Nokia X6 on Android One shipped from China and for some reason it defaults continuously to H+ instead of LTE on my Cricket network. On my Network Type option in the Setting In only have 3 options 2G, 3G and 4G and I have 4G selected, but still H+ is being used by default even in areas where I used to get full LTE signal.
I have tried however to get into the Android Testing Menu (by dialing *#*#4636#*#*) and change the Preferred Network Type to a few options like LTE/UMTS auto (PRL), but for some reason is the H+ that is picket all the time. even in areas where I know the LTE signal is strong. If I select "LTE only" from that menu, then I'm getting on LTE but as soon as I go into weak signal region, the signal drops completely, while not the same thing I can say about the other option, when the H+ connection is present in the same weak signal area.
Another thing that I see in the Android Testing Menu is that my VoLTE provisioned option is Off and I can turn it on.
Do you guys have any ideas on how can I get this device connected to LTE when the signal is strong?
Click to expand...
Click to collapse
Android One TA-1099 or TA-1103?
For TA-1099
Network 900MHz, 1800MHz, 850MHz, 1900MHz, 800MHz, 2GHz, Band 38, Band 39, Band 40, Band 41 (2555-2575 MHZ, 2575-2635 MHZ, 2635-2655 MHZ), Band 1, Band 3, 1.9GHz, I , II, V, VIII
Data Service LTE Cat. 4, 150Mbps DL/50Mbps UL
Could someone upload the bands for this phone? I'm not sure about get it, I need to know if TA-1103 have the LTE B4, in some sites said yes and other no.
brunonemer said:
Could someone upload the bands for this phone? I'm not sure about get it, I need to know if TA-1103 have the LTE B4, in some sites said yes and other no.
Click to expand...
Click to collapse
TA-1103 LTE Band 1, 3, 5, 7, 8, 28, 34, 38, 39, 40, 41
https://imgur.com/a/SqSj1Tg
https://imgur.com/a/oDBAiOe
https://imgur.com/a/QAnFBVG
https://imgur.com/a/glcUhMc
https://imgur.com/a/SXYMKfM
Gin.Or.Juice said:
Hi guys,
I just got a Nokia X6 on Android One shipped from China and for some reason it defaults continuously to H+ instead of LTE on my Cricket network. On my Network Type option in the Setting In only have 3 options 2G, 3G and 4G and I have 4G selected, but still H+ is being used by default even in areas where I used to get full LTE signal.
I have tried however to get into the Android Testing Menu (by dialing *#*#4636#*#*) and change the Preferred Network Type to a few options like LTE/UMTS auto (PRL), but for some reason is the H+ that is picket all the time. even in areas where I know the LTE signal is strong. If I select "LTE only" from that menu, then I'm getting on LTE but as soon as I go into weak signal region, the signal drops completely, while not the same thing I can say about the other option, when the H+ connection is present in the same weak signal area.
Another thing that I see in the Android Testing Menu is that my VoLTE provisioned option is Off and I can turn it on.
Do you guys have any ideas on how can I get this device connected to LTE when the signal is strong?
Click to expand...
Click to collapse
So, have you solved your problem?
If the ROM of your phone is "CN" you could try to flash the phone to the global ROM 2_29(WW) or wait for a new update of the firmware. You haven't noticed the firmware's version. Have the phone got any updates?
I just returned the phone and got an LG G7 instead. The X6 that I was using also had a problem with Bluetooth as I was never able to turn it on.
Manually switch the preferred network type.
I am using the latest Stock Android version on Nokia 8 and struggled with this issue too. I tried everything I could possibly do.
The simplest answer is to go into network settings and select 2G, give it a minute to find it. Do it for 3G too. Give it a minute to find it. Then 4G, same thing. Finally select 4G as preferred network type and that should do it.
It looks like the default preferred network type is 3G from the factory.
guys i cant even access my mobile data connection can anyone tell how access it
thanks
By salah