Database Users

T-mobile (USA) 3G

Hello, I am having trouble getting 3G working on my x10i. I have read through these forums and tried every apn settings I could find but still it only uses edge. T-mobile customer service tells me i have great 3g coverage in my area but that since its a non-tmobile phone it will not use 3G. Is this true or can anyone help? Right now im using epc.tmobile.com as my apn, data roaming on, and MMS & data turned on. Need more info just let me know.Thx for any help

check your sony ericsson xperia x10 box on the side, see if it said UMTS is saying "AWS1/AWS4/AWS8" if you are missing AWS4, then you will not be able to use T-mo USA 3G because T-mobile UMTS (3G) bandwidth frequency is 900 (AWS1) / 1700 (AWS4) / 2100 (AWS8)

i had a similar problem when my T-Mobile 3G constantly switched to Edge even when i had good coverage, i found this solution somewhere and it helped me, since then i was never dropped from 3G unless i had no bars... i would give this a try for your problem too.
1) enter in dialer the following: *#*#4636#*#*
2) select phone Information
3) press the menu button (left bottom hard key)
4) Select Radio Band
5) Select USA Band
6) Reboot Phone
This will narrow down your phone to USA 3G only, (if leaving the country you should switch back to automatic to get international 3G coverage), i found this also helpful for 3G speed and battery performance.

check your sony ericsson xperia x10 box on the side, see if it said UMTS is saying "AWS1/AWS4/AWS8" if you are missing AWS4, then you will not be able to use T-mo USA 3G because T-mobile UMTS (3G) bandwidth frequency is 900 (AWS1) / 1700 (AWS4) / 2100 (AWS8)
Click to expand...
Click to collapse
Thx for your replies , yes it says "UMTS/HSPA band 1/4/8" So should be possible.

1) enter in dialer the following: *#*#4636#*#*
2) select phone Information
3) press the menu button (left bottom hard key)
4) Select Radio Band
5) Select USA Band
6) Reboot Phone
This will narrow down your phone to USA 3G only, (if leaving the country you should switch back to automatic to get international 3G coverage), i found this also helpful for 3G speed and battery performance.
Click to expand...
Click to collapse
thx for your reply, I tried this and i still see the E for edge. Could it have something to do with the fact that where i live is actually using a different tower than tmobile?

thx for your reply, I tried this and i still see the E for edge. Could it have something to do with the fact that where i live is actually using a different tower than tmobile?
Click to expand...
Click to collapse
I doubt cause tmobile told you that your coverage is okay, it might be that you have an old sim card with no support for 3G, or Would say your phone is defective…
-------------------------------------
Sent via the XDA Tapatalk App

try go to setting --->wireless controls --->Mobile Networks ----> Network mode
and select WCDMA only
see if it go back to 3G signal. For my area sometimes i stay on edge due to signal blocked by building walls....
by the way, will you get 3G signal when you are outside of your house or in a wide open area?

When i choose WCDMA i lose my cell signal completely. I have tmobile service but In my area it is always using centennial wireless towers for my signal, centennial was bought out by AT&T which have not yet switched their new towers to 3G yet. Could this be the problem? Thx

devilleather said:
When i choose WCDMA i lose my cell signal completely. I have tmobile service but In my area it is always using centennial wireless towers for my signal, centennial was bought out by AT&T which have not yet switched their new towers to 3G yet. Could this be the problem? Thx
Click to expand...
Click to collapse
Sounds like you found the issue. If WCDMA only shows no signal at all, it means you do not have T-Mobile 3G in your area (I suspect the 1700 spectrum).
It looks like there is a roaming agreement in which T-mobile can "borrow" the AT&T tower. So, all you get is the GSM signal. Don't bother to wait for AT&T to get the tower to 3G...because, you know, it won't be the same 3G signal as T-mobile. AT&T operates 3G on 850 and 1900.
If that is the issue, maybe you have to switch to a X10a.

When i choose US band it says its unsuccessful? any ideas why???

Recent 3g prob: UMTS only, no HSPA any more.

I recently purchased an un-sub N1 for T-Mobile in the Melbourne, FL area. It has been painful moving from AT&T because the speeds that I've been getting on HSPA SpeedTest.net have been 700kbps down and 300kbps up consistently. As to my issue now, I noticed that my phone never switches from UMTS(3g indicated in the notification area) to HSPA any more. It used to stay in UMTS until data was used and then switch to HSPA. All over the area over multiple towers this has happened.
Can anyone think of a reason on my end that this could happen? My wife has a stock N1 so I'll check her phone and see if it uses HSPA at all although with the stock radio she stays on EDGE most of the time while my phone, in the same car is on 3g but that's another problem.
Rick

Open your dialer and key in *#*#4636#*#*
Go to "Phone Information"
Scroll down to "Set preferred network type:"
and select "WCDMA only".
That should force ur phone to receive HSDPA only. Might need to switch back to "GSM only" every now and then if you're not getting signals and stuff.

Network dies when I turn off 2g

Anyone have this problem? It happens ever time
Sent from my T-Mobile G2 using XDA App

Hmm.... seems like your phone might be in WCDMA mode only... It should be in WCDMA-Preferred since you plan on using 3G and 2G
Go to your phone dialer and dial *#*#4636#*#*
and Diagnostics Menu should come up..... Go to PHONE INFORMATION.... Scroll down and Set Network Type to: WCDMA Preferred
see if that helps...

Thanks for the reply i am on tmobile and it is defaulted to GSM. Will changing it be any different than GSM?

my phone does that as well right now at home even though i have it on WCDMA preferred, t-mo has been having issues with their 4G towers and their DNS servers lately that has been affecting many people with newer phones/SIM cards and in 4G areas, t-mo has not released an ETA on a fix but i have been dealing with it for a month now at my home and i am about ready to switch carriers

tvdang7 said:
Thanks for the reply i am on tmobile and it is defaulted to GSM. Will changing it be any different than GSM?
Click to expand...
Click to collapse
Nope, it'll still be the same. WCDMA-Preferred means that then phone will Prioritize 3G/4G signal over an EDGE signal. So If you are in a decent 4G/3G coverage the phone will set itself into 3G/4G mode... and when you move into an area where you have a weaker 3G/4G signal...t han the phone will be in EDGE mode.

Keep in mind that if you're referring about using WCDMA Preferred in a 3G/4G coverage area - but only 2G works - then you have a network issue. This isn't so much a device issue as it is a MSISDN issue on the network or a potential tower issue.
If you get no signal on 3G/4G and signal is there on 2G - check your coverage first - then if coverage shows you should have 3G/4G, call TMO and let them know, they'll need to do a service request or trouble ticket based on the location and breadth of the issue you're having.

[Q] HSPA

I am a noob to the world of android phones (as an owner) however I have an android tablet. Currently i am warming up to android so i purchased a Samsung Galaxy Y. I am currently in Jamaica and the provider I had purchased the phone from is a 2g, 4g provider knowing i could not legitimately get 4G I was given a 4G none the less but my phone would say H during data transfers, I have never tested the speed though. My internal memory was full and after hours and days of trying link2SD and other programs to create a psedo-extended internal drive i decided to try Creeds rom V4 however it was a memory hog and i decided to try another ROM, this caused my phone to "brick" i was able to unbrick itexcept now i am seeing E for my data transfers instead of H. I have no HSPA menu since noticing that i have tried several other ROMs and stock OS however none gave me back the H please help :'(

*#*#4636#*#* push Phone Information and push WCDMA Preferred on the drop down.

help me its now working
MrObvious said:
*#*#4636#*#* push Phone Information and push WCDMA Preferred on the drop down.
Click to expand...
Click to collapse
WCDMA prefered was the first thing selected on the drop down
You must have a 3G/4G mobile compatible device such as a smartphone, BlackBerry, tablet or dongle and a Digicel SIM to access Digicel 4G Mobile.
Our 4G network supports any device with the 850MHz band. Any such 3G, 4G, HSPA, HSDPA and HSPA+ capable device can enjoy the fastest download, upload and browsing speeds available on Digicel 4G Mobile.
Change your phone settings for 4G:
Customers must ensure that the device settings are properly set up to connect to 4G Mobile.
Here is how to change your phone Network Settings:
STEP 1 - Device Settings:
· 4G Phones/Smartphones: Adjust your phone network settings in “Network Settings” or “Network Connection” to 3G & 2G, 4G & 2G, GSM/WCDMA or dual mode depending on your phone type.
· BlackBerry Smartphones: Adjust your phone network settings in “Manage Connections” or “Mobile Network Option” to 3G & 2G or 4G & 2G depending on your phone type.
STEP 2 - Remove and replace the phone battery or power off and on your phone.
STEP 3 - Once you have successfully connected to 4G Mobile the icon on your home screen should successfully change to 3G+, 4G, H, H+, HSPA+ etc. The icon displayed is dependent on the device model. The icon will change if you are in a 4G coverage area.
Taken from my mobile provider's website
i mean its no working

Disable GSM, use LTE/WCDMA only

I tried searching however could not find anything. Perhaps I may be using the wrong wording.
What I am trying to accomplish is to disable the GSM mode. What I find is the phone likes to jump to the GSM network and with that the internet connection just doesn't move at all. If I force the phone to WCDMA mode it work just fine standing in the same spot, so the phone is still picking GSM over WCDMA even when there is a good signal for WCDMA.
Current modes:
LTE/WCDMA/GSM (auto connect)
WCDMA/GSM (auto connect)
WCDMA Only
GMS only
Is it possible to have a LTE/WCDMA option?

MrDerrickC said:
I tried searching however could not find anything. Perhaps I may be using the wrong wording.
What I am trying to accomplish is to disable the GSM mode. What I find is the phone likes to jump to the GSM network and with that the internet connection just doesn't move at all. If I force the phone to WCDMA mode it work just fine standing in the same spot, so the phone is still picking GSM over WCDMA even when there is a good signal for WCDMA.
Current modes:
LTE/WCDMA/GSM (auto connect)
WCDMA/GSM (auto connect)
WCDMA Only
GMS only
Is it possible to have a LTE/WCDMA option?
Click to expand...
Click to collapse
I miss this option. The Xperia Z had this mode, I loved it. It was reachable via the common code *#*#4636#*#*. But this code doesn't work on the GT-I9505 with stock Samsung ROMs. But even with custom ROM, and working code. This special mode is missing. There are 2 switches for "LTE only" and "WCDMA only" but not both

Try this:
https://play.google.com/store/apps/details?id=com.tapbase.LTEswitcher&hl=de

MrSpiceGuy said:
Try this:
https://play.google.com/store/apps/details?id=com.tapbase.LTEswitcher&hl=de
Click to expand...
Click to collapse
App doesn't seem to work, when I hit "Select Radio Band" it comes up with "Set GSM/UMTS Band" and nothing else.

MrDerrickC said:
App doesn't seem to work, when I hit "Select Radio Band" it comes up with "Set GSM/UMTS Band" and nothing else.
Click to expand...
Click to collapse
You have to use "prefered network type" as seen here
https://lh5.ggpht.com/y1CQbSg9Wf8J3q3klA3GNi_IgVtluML2jwhW38ldPpExSPTQ_SEu6iWJa3kRNaiSfcg
This should work

Here is my screenshot. It only has "LTE/CDMA", which only allows me to use LTE. There is no "LTE/WCDMA" option.
Perhaps, this might be an idea for rom creators?

also interested in this.

yes, please add this function LTE/WCDMA only into ROM CYANOGENMOD.
because LTE/GSM auto (PRL) connect to 2G/3G/4G, and i'm not interested for 2G.

Did anyone ever find a solution to this?

fergietime said:
Did anyone ever find a solution to this?
Click to expand...
Click to collapse
Solution please ! I have the same problem also

True. I am able to use the following:
LTE/GSM (prl)
WCDMA (prl)
GSM Only (prl)
I am unable to use LTE/WCDMA/GSM
I am using XXUGNG8 modem, and I am unable to use 2G (network won't connect).
3G works in most cases, but it is still dropping. Only technology which works correctly is LTE...stable and fast.
I am unable to switch the network band to any other one. I tried it with service menu tool, but it does not work either (allows me to change to defined items above, and reverts back to LTE/GSM if I'll select anything else).
Is there a way to add support for more network modes? I am confident that my issues are not related to HW, as both bootloader, GSM modem and LTE modem are all of the same version - XXUGNG8, and I do have very good reception for whole band. I am just unable to switch over to 2G, and 3G is still dropping.
I live in Prague, Czech Republic, and I own GT-9505i variant

Any solutions guys?

any solution to this date? im interested in the same thing.

I finally found a solution that works on my Samsung Galaxy S5. Enter code *#2263# into your dialer. An option menu will open with "LTE/WCDMA Mode" only as an option. Works like a charm!

Wrong posted.

Hi,
Sorry to bump this but I have the same issue. I have a Galaxy S4 and it is very weird with its network selection.
The default setting is LTE/GSM auto, which I believe is LTE combined with the GSM Auto mode that everyone knows about - this being, prefer 2G instead of 3G in weak signal areas.
I have the following options:
LTE Only
LTE/GSM Auto
GSM Auto
WCDMA Only
GSM Only
WCDMA Preferred
Plus a load of other stuff about CDMA and EvDo (I'm sure that the GT-I9505 doesn't support CDMA or EvDo?).
The problem I am having is as follows:
Immediately when I got the S4, I realized that it was preferring GSM over WCDMA/HSPA. This was confirmed when compared with a Samsung Galaxy Ace Plus, on the same network, in the same location, and the Ace Plus (S7500) was choosing 3G, whilst the S4 chose 2G. Doing a bit of Googling led me to find the WCDMA setting, and after choosing that, the S4 chose 3G.
So all was good for the last 2 years, using WCDMA Only mode on my S4, as my mobile operator (Virgin Mobile) didn't have 4G access. Losing LTE wasn't a problem.
However, now I have switched to the EE network, I now face a problem. As mentioned above, there is the WCDMA Only mode, and the LTE Only mode - meaning that I am unable to have both 3G (WCDMA) and 4G (LTE) without also having GSM, and there is no way that I want to ever use GSM again, especially since that EDGE/GPRS are barely usable as data connections, GSM has sub-standard voice quality, and the S4 is choosing GSM over WCDMA.
A couple of examples, once on my way home, the S4 dropped from 4G to 2G and completely ignored 3G - despite being right next to a 3G mast operated by EE (albeit on the old Orange code). On WCDMA mode, the phone always connects to the Orange 3G mast. Thankfully, a bit later on, it did pick up 4G again, but if I was streaming Tunein Radio, that would have been a disaster (it would have dropped the stream).
A bit later on, on the same journey, the phone also went to 2G, from 4G - despite being in a reasonable signal area for 3G. Why didn't the phone choose 3G? I'd had enough by then and switched to WCDMA Only mode; result? 28% 3G signal (3 bars)!
It's also happened on my local mast, until a few weeks ago. The S4 was choosing 4G from a more distant mast (strength 50%), instead of 3G from the local mast (strength 60%). When I went downstairs, to the kitchen, the signal strength dropped and the phone went straight to GPRS! GPRS is likely to give about 30kbps max, so I don't know why the phone was doing this - although about 20-30 seconds later, it did then go to the 3G from the local mast.
I can't use LTE Only mode as (a) the 4G rollout isn't complete, and (b) the S4 does not support Voice Over LTE (VOLTE), meaning that in 4G only mode, I have no way of accepting or receiving calls.
I need a 3G/4G mode (LTE/WCDMA) on my S4, that doesn't use 2G at all, because 3G/4G signals are present virtually everywhere on the EE network, and it would stop the S4's crazy behavior.
Any suggestions to remedy this would be appreciated. I am not rooted, though if someone knew how to root the phone for me, it could be a possibility, as it is out of warranty.