Related
There are the following tabs......
Call Barring (this works)
Caller ID (after hittings "Get Settings")
It says Unable to read settings from the network. try viewing settings later, or disconnect data connection and try again"
Call Forwarding (This works)
Call Waiting This Works)
Voice Mail and Text Messages (This works)
Fixed Dialing (This works)
They all work were ever however i do it. but not the Caller ID.....if everything else works why doesnt this one.....(i have it on T-Mobile but everything else works) n yes i have tried it later as it says
yea i still havent figured it out yet i did try to update my netframe to 3.5 just to see if this helped. but it didnt
Are you sure that T-Mobile supports caller ID? I am with them aswell, and I do not, nor can I add it to any of my lines.....
I've just bought a second hand omnia 7, i put my sim card in and went straight on facebook so i assumed it was fine.. i then realised i couldnt make calls or send texts, and none of my calls went through. i tried it on a different sim and had the same problem.. HELP
I also have this problem any help? I cant make/send calls or texts but can get on G and browse the internet, could this be a problem with the setting on the phone? APN's maby? done 2 factory resets and recieved a text from windows phone saying welcome but thats all it will do....
I have the same problem, after some time. Messaging and calls stop working...
Has anyone come up with a fix for this?
I have full signal on an unlocked Omnia 7 but it is a simple case of not being able to make any calls or texts (or receive them for that matter).
Maybe they tamperd in Diagnostic Tools. I messed aroun and had a hard time restoring the radio settings. Look for diagnostic codes here you find a toon if codes to use. Hit this in your dial pad and you install and start the diagnostic tools.
##634#
You need to find the codes (cant remember em im afraid) that gives access to gsm/3G section.
Just had to look =P
- Hit *#32489# and you get to Cyphering. Mine is on
- Hit back once and you can press [5] RRC (HSPA). Mine is set to REL6
- If you back to the side where we could find the above [5]RRC option, you have below a Dual Mode setting. Mine says "Not ACT"
- When you type in *#32489# you can press back 2 times. There you can select option [7] Network settings. In there you can look if stuff is in automatic modes. Like...
[2] Band selection, mine is in automatic.
Well, there you have it. Something to compare to a working device. A hard reset won't put these values to default so you will have to look for your self. Now be carfull in there, you can do more damage if you dont acctully read what the pages says. If you understand what im saying, there should be no problems. Check out your settings and compare to mine. Se any diff just set it like i given advice on. Hope this helps..
Cheers for the advice but it hasn't helped as I have the same settings as you, another thing to add whenever I do try to make a call it comes up "00:00 Call Ended". I hope that may help someone in diagnosing the problem.
Have you tried downloading the Samsung Network Profile tool from Marketplace and then changing the Active profile to your SIM card?
Hvae you tried putting an unbranded ROM on? (even an old one as Zune will update with the unbranded ROM!!)
Same problem tried different ROMS but still have "Emergency Only".
The SIM is OK.
anybody found a fix for this problem ? im also suffering but the phone will receive texts and voice-mail on the orange network, it was on orange before i got it unlocked.
thanks hope there is help out there
I have been trying to get wifi calling with AT&T is working on my International S7 edge. I have made headway.
1. First of all I told AT&T I had their branded S7 edge and gave them an IMEI that will show up that phone. So I can activate my phone.
2. I have narrowed down the required apks to the following, but some are obviously for the Wifi Calling, and other's I am not sure. If people know what some of these apks do, please let me know.
3. I have used the Note 7 Port and flashed TTKG CSC selection and chosen the ATT CSC, we are still working on getting it working in the S7 and Edge CSC.
4. The following APK's I feel are related to Wifi Calling are.... If you can help me eliminate some that aren't. They are deodexed, and I have uploaded them, you will need to change the permissions to match the ones in the system folder.
atfwd
ATTVoWifiSPG
com.quicinc.wbcserviceapp
NSDSWebApp
VolteSettings
vsimservice
WAPPushManager
Wispr_ATT
AppSelect_ATT
5. I am unsure if I need to make Buildprop changes or I am missing other system files. I was able to activate wifi calling and turn it on, but it doesn't work.
Psyscope said:
I have been trying to get wifi calling with AT&T is working on my International S7 edge. I have made headway.
1. First of all I told AT&T I had their branded S7 edge and gave them an IMEI that will show up that phone. So I can activate my phone.
2. I have narrowed down the required apks to the following, but some are obviously for the Wifi Calling, and other's I am not sure. If people know what some of these apks do, please let me know.
3. I have used the Note 7 Port and flashed TTKG CSC selection and chosen the ATT CSC, we are still working on getting it working in the S7 and Edge CSC.
4. The following APK's I feel are related to Wifi Calling are.... If you can help me eliminate some that aren't. They are deodexed, and I have uploaded them, you will need to change the permissions to match the ones in the system folder.
atfwd
ATTVoWifiSPG
com.quicinc.wbcserviceapp
NSDSWebApp
VolteSettings
vsimservice
WAPPushManager
Wispr_ATT
AppSelect_ATT
5. I am unsure if I need to make Buildprop changes or I am missing other system files. I was able to activate wifi calling and turn it on, but it doesn't work.
Click to expand...
Click to collapse
Did you ever get this resolved? So far I can not for the life of me, get WiFi Calling working on my S7 Edge exynos. Basically throws an error stating the activation failed, and never brings up the screen to enter in my emergency contact address like AT&T is supossed to re-direct you to.
The activation fails because AT&T doesn't have an AT&T wifi capable phone on your account which then allows you to activate the wifi. I have two imei's that are linked to AT&T s6 and s7. I can give you the imei. Go to att tech support give them the imei and tell them to update your account to be able to get visual voice mail and wifi calling. After you do this, they will alow you to activate it. However I gave up after a while. If you flash the custom csc, you must do it before your phone boots up after a factory reset and flash a custom rom. I am waiting as I am on Nougat now, so until ATT updates it's apps again.
Psyscope said:
The activation fails because AT&T doesn't have an AT&T wifi capable phone on your account which then allows you to activate the wifi. I have two imei's that are linked to AT&T s6 and s7. I can give you the imei. Go to att tech support give them the imei and tell them to update your account to be able to get visual voice mail and wifi calling. After you do this, they will alow you to activate it. However I gave up after a while. If you flash the custom csc, you must do it before your phone boots up after a factory reset and flash a custom rom. I am waiting as I am on Nougat now, so until ATT updates it's apps again.
Click to expand...
Click to collapse
Thanks, although I'm a bit confused on the steps your outlining here. I assume you're stating that I'll need to somehow modify a ROM (in this case SAC's N7 ROM for S7 Edge Exynos), and inject an IMEI? I'm not entirely sure how to do that to change the IMEI (this would be my first time attempting to do that). Then I would reflash that image, and then re flash the CSC update to AT&T? Maybe I'm not understanding, but my iPhone 6 is on my account and fully capable of wifi calling. In fact we have 2 iPhone 6s on the account. What exactly did you give up on?
Hate to sound like a newb here (although in a way... I am), but can you step me through the process so I can follow your line of thought? Appreciate the help!
So first of all an Android WiFi Calling and IPhone Android WiFi calling are different you will need to tell at&t you have an AT&T branded Android phone that has WiFi calling. This will lead at&t to add the ability to add wifi calling on your account.
Have you rooted your phone and installed a custom rom? If so then you would flash ttkg84's csc package and choose att. Which will flash most if not all the files. I got all the way to confirm my address and enable wifi calling, but it never worked.
Do not insert another phones imei into your phone, you will brick it and will have a expensive paper weight.
I have given up for now and am waiting for a full release of Nougat.
PM my I can give you am imei to give AT&T to enable video calling, visual voice mail and give the ability to activate WiFi Calling, but it's not likely to work. Some things are still missing.
You may never get wifi calling working because at&t uses a slightly different method then everyone else. I think they will standardize with Nougat.
Psyscope said:
You may never get wifi calling working because at&t uses a slightly different method then everyone else. I think they will standardize with Nougat.
Click to expand...
Click to collapse
That's what I thought.... So what about the King of Nougat ROM that's lingering out there currently? I realize Nougat is still beta, but have you tried the beta?
I haven't tried King of Nougat. I am currently using Nougat? Are you on telegram?
Psyscope said:
I haven't tried King of Nougat. I am currently using Nougat? Are you on telegram?
Click to expand...
Click to collapse
So... Interestingly enough. I just got WiFi Calling to work this morning...
Basically, I did the following steps:
1. No SIM Inserted into Galaxy S7 Exynos - SD Card only
2. Reboot to Recovery
3. Wipe
4. Download and Install SAC23's Full n7 ROM located here: http://forum.xda-developers.com/s7-edge/development/rom-n7-rom-port-romcontrol-t3430358 - I did the V8 Debloated version
5. When prompted - Wipe Dalik
6. Insert SIM Card from AT&T iPhone (ensured WiFi Calling was turned OFF on the iPhone prior to removing from iPhone)
7. Reboot first time into N7 ROM
8. Go through the setup and connect to a WiFi location that you know WiFi calling works at.
9. Download a browser (Chrome or whatever) at a minimum
10. Eat a Bacon, Lettuce, and Tomato Sandwich :good:
11. Reboot to Recovery
12. Flash CSC for the N7 located here --> http://forum.xda-developers.com/note-7/development/utility-flashable-csc-selection-v1-0-t3450911 - Grab the CSC snapdragon the Exynos zip
13. Reboot
14. Status bar will indicate VoLTE enabled up at top eventually.
15. Try going to the pull down from the top, and clicking WiFi Calling option a couple times.... no dice.
16. Try going to the phone app --> Click Settings --> Note WiFi Calling is off --> Try clicking it on a few times.... you'll get an adroid app stopped working.
17. After sitting on this sceen for a few minutes, note the VoLTE dissapears, and the icons on the phone app screen (The Call Start Button and the Call End button) switch to WiFi magically.... Try making a call with 0 zero cell reception, and indeed, the call is being made through WiFI on AT&T's network.
Now.... I have absolutely zero idea what's going on with the VoLTE icon disappearing.... and the WiFI calling suddenly working. If you reboot the phone, the same thing occurs. It starts in VoLTE.... and then eventually disappears, and eventually after a couple of minutes being connected to a WIFI connection, switches auto-magically to WifFi calling.
I'll take some screenshots.
Usaf-lt-g said:
So... Interestingly enough. I just got WiFi Calling to work this morning...
Basically, I did the following steps:
1. No SIM Inserted into Galaxy S7 Exynos - SD Card only
2. Reboot to Recovery
3. Wipe
4. Download and Install SAC23's Full n7 ROM located here: http://forum.xda-developers.com/s7-edge/development/rom-n7-rom-port-romcontrol-t3430358 - I did the V8 Debloated version
5. When prompted - Wipe Dalik
6. Insert SIM Card from AT&T iPhone (ensured WiFi Calling was turned OFF on the iPhone prior to removing from iPhone)
7. Reboot first time into N7 ROM
8. Go through the setup and connect to a WiFi location that you know WiFi calling works at.
9. Download a browser (Chrome or whatever) at a minimum
10. Eat a Bacon, Lettuce, and Tomato Sandwich :good:
11. Reboot to Recovery
12. Flash CSC for the N7 located here --> http://forum.xda-developers.com/note-7/development/utility-flashable-csc-selection-v1-0-t3450911 - Grab the CSC snapdragon the Exynos zip
13. Reboot
14. Status bar will indicate VoLTE enabled up at top eventually.
15. Try going to the pull down from the top, and clicking WiFi Calling option a couple times.... no dice.
16. Try going to the phone app --> Click Settings --> Note WiFi Calling is off --> Try clicking it on a few times.... you'll get an adroid app stopped working.
17. After sitting on this sceen for a few minutes, note the VoLTE dissapears, and the icons on the phone app screen (The Call Start Button and the Call End button) switch to WiFi magically.... Try making a call with 0 zero cell reception, and indeed, the call is being made through WiFI on AT&T's network.
Now.... I have absolutely zero idea what's going on with the VoLTE icon disappearing.... and the WiFI calling suddenly working. If you reboot the phone, the same thing occurs. It starts in VoLTE.... and then eventually disappears, and eventually after a couple of minutes being connected to a WIFI connection, switches auto-magically to WifFi calling.
I'll take some screenshots.
Click to expand...
Click to collapse
Followed the method above using Superman 1.16 and CSC selector 1.86.
Haven't been able to test wifi calling since I haven't found an area with wifi and no cell reception, but so far everything looks like it's working.
Important to note that the AT&T account probably does need to be provisioned for a G935A rather than G935F, which is done by reporting a G935A IMEI to AT&T (and not changing it on the device itself) as mentioned previously.
aramisathei said:
Followed the method above using Superman 1.16 and CSC selector 1.86.
Haven't been able to test wifi calling since I haven't found an area with wifi and no cell reception, but so far everything looks like it's working.
Important to note that the AT&T account probably does need to be provisioned for a G935A rather than G935F, which is done by reporting a G935A IMEI to AT&T (and not changing it on the device itself) as mentioned previously.
Click to expand...
Click to collapse
Hmmm, gotcha.... but if you report a G935A they typically want you to power off and power on the phone to check the provisioning while on the phone with them. And what happens if someone calls in and then tries to re-provision the same IMEI on another account? What happens to my SIM in my G935FD? Thanks!
Usaf-lt-g said:
Hmmm, gotcha.... but if you report a G935A they typically want you to power off and power on the phone to check the provisioning while on the phone with them. And what happens if someone calls in and then tries to re-provision the same IMEI on another account? What happens to my SIM in my G935FD? Thanks!
Click to expand...
Click to collapse
Far as I can tell they don't check IMEIs against different accounts.
I can't say for sure, but I haven't had an issue as my phone has a different IMEI (or IMEIs--G935FD) than the one listed on my account (which reads as a G935A).
In short, asking AT&T to change the IMEI on the account hasn't affected or changed the IMEIs on my phone, or caused any problems.
As far as provisioning, I told them I was on the phone, so they called me back a few minutes later and didn't report any issues or discrepancies to me.
It'd be just as easy to tell the rep the phone isn't available though, so just ask them to change the IMEI and you can call them back later if there are issues if that's a concern.
Looks like great news. I was happy I was able to activate my 935F via AT&T (I gave them the actual IMEI and they activated it). I'm on Superman ROM and flashed ATT CSC. I get visual voicemail and the WiFi calling button, but it doesn't actually work. I'll see if I can get a valid 935A IMEI and ask them to activate again. Hopefully that will do the trick. I get a horrible signal at home, and the 4G/LTE icon is constantly flickering on and off... AT&T Video call option shows up in settings, but won't turn on... no wifi calling setting in the settings menu, just the quick settings button.
Any guidance appreciated!
mike
aramisathei said:
Far as I can tell they don't check IMEIs against different accounts.
I can't say for sure, but I haven't had an issue as my phone has a different IMEI (or IMEIs--G935FD) than the one listed on my account (which reads as a G935A).
In short, asking AT&T to change the IMEI on the account hasn't affected or changed the IMEIs on my phone, or caused any problems.
As far as provisioning, I told them I was on the phone, so they called me back a few minutes later and didn't report any issues or discrepancies to me.
It'd be just as easy to tell the rep the phone isn't available though, so just ask them to change the IMEI and you can call them back later if there are issues if that's a concern.
Click to expand...
Click to collapse
Hello all,
Got my G955N in my hands. Followed the threads here to get TWRP installed, used it to install Batman ROM, then used TWRP to flash the AT&T CSC as my provider is AT&T.
In my pull down menu I do have the option for WIFI calling, however whenever I hit it, it fails (seems I can't post pics, so here is the text I get: "Loading, this may take a few moments" then it blinks a few seconds in and repeats. Then it goes to "Please try to set up WIFI calling again later."
I know it's an issue with my phone specifically because my wife's AT&T iPhone7 has WIFI calling working fine (not an ISP issue at home) and I swapped her SIM into my phone and I still got the same error. So it's something with the phone and not likely an account level issue (although maybe? Who knows at this point?)
Also, when I enter the testing menu, I see that "Data Service: Disconnected" which I'm not sure is right? Also, VOLTE Provisioned is not selected, however each time I do select it, it immediately goes back to deselected the moment I navigate away from the testing menu. I can reselect it all day and it still goes back to deselected the moment I move out of the screen.
I've read until my eyes bleed and tried just about everything I could find to try and no joy.
Any ideas?
P.S. got pics if anyone wants me to email them to you for clarity. Guess I'm too new here to be allowed to post pics
To follow up:
Turns out it was an account based issue. Seems AT&T tries to verify the IMEI when attempting to use Wifi calling. So unless registered in the network, it isn't going to work.
And the kicker is, AT&T won't allow Wifi calling or other services with any phone they didn't sell. You can toss in your SIM and use calling, but they won't activate other features if you try to bring your own phone.
So I spent yesterday switching to T-mobile and am now fully functional with all the features of my phone working as they should. AT&T lost me as a customer.
I received a new pixel 4a 5g on Friday. I have spectrum mobile and I can't get wifi calling to work. I have called spectrum twice and have gone to the local spectrum store. I have also chatted with a Google tech. No one can get it to work.
No issues with WiFi calling. Have you tried switching to airplane mode and re-eanable Wifi only? This switches on Wifi calling quickly on my 3a and 4a5g
v said:
No issues with WiFi calling. Have you tried switching to airplane mode and re-eanable Wifi only? This switches on Wifi calling quickly on my 3a and 4a5g
Click to expand...
Click to collapse
Yes, I tried that. It didn't work.
It just started working this morning.
There seem to be problems with WiFi Calling on T-Mobile:
T-Mobile WiFi Calling one way audio
After the connection switches between mobile and Wifi Calling, there is only one way audio, the other party can hear me but I cannot hear the other party. The only fix seems to be to reboot the phone, but after a while the problem is back. It...
forum.xda-developers.com
sirxdroid said:
There seem to be problems with WiFi Calling on T-Mobile:
T-Mobile WiFi Calling one way audio
After the connection switches between mobile and Wifi Calling, there is only one way audio, the other party can hear me but I cannot hear the other party. The only fix seems to be to reboot the phone, but after a while the problem is back. It...
forum.xda-developers.com
Click to expand...
Click to collapse
Yes, I had this exact issue. Fix was to reset Wi-Fi, mobile & Bluetooth. Hope it doesn't return, but we'll see.
Hello all,
I also have a 4a 5g phone that I've been trying like hell to get working. Started with just seeing if I could find it myself. Found something in the settings (gone now), but it said something about WiFi calling. It happened to be grayed out.
Next step was calling tech support. They could help me and they convinced me that I have to change the sim card. OK change the sim card for using wifi calling. Whatever, the sim card arrived today and I swapped it out. Now I don't have phone service and I still can't get wifi calling.
My question is where is the setting for turning wifi calling off and on? I follow these directions;
How to Enable WiFi Calling on Android 11 Stock OS
Step 1: Pull down the notification panel at the top and touch the “Settings gear (Cog)” icon.
Step 2: Touch on “Network and internet”.
Step 3: Touch “Mobile network”.
Step 4: Scroll down and touch on “Advanced”.
Step 5: Tap on “Wi-Fi calling” in the calling section.
I follow the steps and it states my wifi calling is on. Yet when I call, it's is calling tech support. I've spent way too much time with dodgy tech support. Not sure what I can try at this point. Fortunately I have other telephone options, but not my main.
Any help would be greatly appreciated.
Us3r_1,
I followed your steps 1-5 on my 4a5G and on T-Mobile and Vodafone it works for me.
What do you mean by
> Yet when I call, it's is calling tech support.
?
v said:
Us3r_1,I followed your steps 1-5 on my 4a5G and on T-Mobile and Vodafone it works for me.What do you mean by> Yet when I call, it's is calling tech support.?
Click to expand...
Click to collapse
Sorry for the confusion here. and thanks for the reply. OK it shows that my wifi calling is on, I don't have any phone service at the moment. Regardless of what number I call, it goes to the step through for getting to different options, like activate phone, change number, and so on. It seems like I have to turn off the phone connection to get wifi calling to step in. BTW, this SafeNet which I think they use Tracpone.
EDIT: My service is not SafeNet, nor SafeLink, but is Net10 on Tracpone. Not for long though.
You're welcome.
BTW: On my 3a I had to restart the phone from time to time. Perhaps this helps in your case.
Double check with your provider that WiFi is switched on for your account.
Yeah I reboot several times through all this. Just did now too. I did see an option to preference wifi calling over phone service. I did that and still it goes to stepping through to options in the phone service when I try to make a call.
You could try switching to airplane mode and then enable wifi only. Keep airplane mode, don't switch it off. Try calling then. This forces Wifi calling.
Finally got the option and my phone working. You are not going to believe what the problem was. It ended up that the service, BTW the service is Net10 Wireless, anyways they had the old sim card number on my account and they were using the the old number! The directions on the new sim card sent, stated to put the new card in the phone and call the number provided, which I did. I gave them the new sim card number and I assumed everyone was working with the new sim card. After well over 6 hrs with "tech support", some with a roster clearly calling out in the background. At the end I was demanding upper management right when I contacted someone. Finally had this tech support go through all the records and she figured out the sim card number was screwed up with the parties.
I'm pissed, it shouldn't take over 6 hrs and 2 days to get this resolved. I pointed out that this was the stupidity of "tech support" that caused practically this whole delay and I would say this people started the whole thing! I called up to get wifi calling up and running. The "tech support" stated that I need a new sim card. Which was the start of this mess. More than 23 calls to them regarding this!
In the end, I put the old sim card in and everything works! Even wifi calling works!
Great!
Looks as if I was close when I wrote:
>Double check with your provider that WiFi is
>switched on for your account.
v said:
Great!
Looks as if I was close when I wrote:
>Double check with your provider that WiFi is
>switched on for your account.
Click to expand...
Click to collapse
Sure would like to learn and know how and why the sim card plays a roll when you are trying to get wifi calling working. In my simple world, it's a working unlocked phone, a wifi connection, and the software on your phone to get this working.
Holly crap! Been using wifi calling successfully for the last day. OK so now I want to go back to regular phone service with phone providers. And you would think you could follow the steps at #7 and stumble your way to getting regular phone service, right. Nope, following the steps laid out will not do the trick. Now I got to figure out how to do it.
Any help on this? The Mobile Network option in Network & Internet is grayed out. Also the + sign does nothing. Turning off Wi-Fi does nothing to.
(Hoping the Hotspot & tethering is easier than wifi calling. I'll be in trouble if it's not.)
i don't have wifi calling on this phone but do on my note 10 plus,is it just in usa?
Us3r_1 said:
..
.OK so now I want to go back to regular phone service with phone providers. And you would think you could follow the steps at #7 and stumble your way to getting regular phone service, right.
...
Click to expand...
Click to collapse
All I had to do was enabling Wifi-Calling in my phone and call the phone company to enable Wifi-Calling.
As soon as I am out of reach of my Wifi, it switches automatically to GSM or LTE (my contract does not provide me with 5G).
In other words: No need to change any settings.
Same if I disable Wifi manually. The phone shows LTE the same second.