Hey guys!
so i've been having this problem in which everytime i install the V4A driver on my nexus 6p and reboot to finish installation it asks me to do it again, i've tried everything, i have my SElinux mode set to permissive, i am running stock marshmallow 6.0.1 and i am rooted, i have busybox installed, i have tried several different Versions of V4A (flashable zips & apk files) and still nothing, i have even tried several rooting methods and different custom ROMs and no luck.
PLEASE HELP ME SOMEBODY!!
Duplicate of #1407
Closed.
Related
Hi guys, so recently I flashed the latest factory image MMB29P afresh, and was looking to flash Xposed v79 immediately after rooting my phone. So I flash TWRP, flashed SuperSu v2.66, rebooted to system and installed the Xposed Installer apk then flashed xposed-v79-sdk23-arm64.zip via TWRP. However after that, immediately after booting it up, all my apps started going into a meltdown, with both user and system apps crashing on a loop. I already had the Xposed Installer apk installed beforehand, and I tried enabling SU upon boot, but all my apps still continued crashing. Only after uninstalling Xposed then it went back to normal. Is there something wrong with what I am doing? Or is this new update screwing Xposed up? I didn't have this problem with MMB29M, does any MMB29P Nexus 6P users experience this issue?
Try flashing the xposed uninstaller to remove xposed from your device. Wipe all of the data with titanium backup on all xposed modules you have installed and remove them. Wipe the data to the Xposed installer app and delete that as well. Reflash the Xposed installer script through TWRP. After flashing it then try installing the Xposed installer APK. Do not try to install Xposed through the App, you have to flash the installer script through TWRP. I would try that and report back.
FYI I am running xposed successfully on the latest 29P build.
Might be a issue with the latest factory image. Did you check the xposed forum to see if other 6P users were having issues after updating to the latest factory image?
hello2ew said:
Hi guys, so recently I flashed the latest factory image MMB29P afresh, and was looking to flash Xposed v79 immediately after rooting my phone. So I flash TWRP, flashed SuperSu v2.66, rebooted to system and installed the Xposed Installer apk then flashed xposed-v79-sdk23-arm64.zip via TWRP. However after that, immediately after booting it up, all my apps started going into a meltdown, with both user and system apps crashing on a loop. I already had the Xposed Installer apk installed beforehand, and I tried enabling SU upon boot, but all my apps still continued crashing. Only after uninstalling Xposed then it went back to normal. Is there something wrong with what I am doing? Or is this new update screwing Xposed up? I didn't have this problem with MMB29M, does any MMB29P Nexus 6P users experience this issue?
Click to expand...
Click to collapse
If you had the xposed.apk already installed, I'd try uninstalling it. Boot to recovery and use the xPosed uninstall. Reinstall with xPosed zip. Reboot and install the apk. I had an issue when I updated to MMB29P and realized I had titanium restored the apk before I had the zip installed.
Now it works great
Hi, I am using Viper4android Fx for Magisk (created by ShadySquirrel) on Xiaomi Mi A1 which was rooted systemlessly by Magisk "patched_boot.img" method. I have installed Magisk SELinux permissive script and Busybox through Magisk Manager. Now whenever I am installing V4A Magisk module, it works for some time and then it stops working with a pop up like "Update/install driver". But when I am trying to update or install the driver, it fails with an I/O error. Reboot doesn't solve the problem. I read on Xda that SELinux permissive script needs to be enabled and storage permission needs to be given to V4A. I have both active. But still, the problem persists. If I uninstall V4A module and reinstall it, then it works, but for a few days. Then the problem starts again. Is there any workaround?
Note that, I have stock android 8.0.0 with no custom recovery and no custom kernel.
https://forum.xda-developers.com/apps/magisk/module-viper4android-fx-2-5-0-5-t3577058
I'm not using viper actually, I stay with Dolby on Oreo with my a1.
But I guess you will find working viper and answers on the link.
I guess I have the same problem here. When I try to install Viper4Android or Viper4Arise modules, phone starts crashing with "Dirac Control Services Stopped Working" showing up every few seconds. I really love Viper and I don't want to move from Stock ROM or install any kernel. Any clue on that?
Maybe Try selinux switcher and viper4android by viper520, zhuhang and others (i Click Three Times Volume Up)
stock ROM, installed viper4android both ways:
standard apk for nougat from viper homepage
zip guitarhero modified through twrp
both ends in driver install loop at every startup
google says linux should be set to permissive (due to writing rights?) and then modify an audio effects file in vendor...dev...tree with root explorer
even after trying to change linux to permissive with selinux chnager app, the discontinued one, i never get that entry audio effects in vendor dev etc somewhat
so whenever i reboot the phone, restart viper4android it wants to install the driver, says success, re same thing.
never had these problems on custom but on stock ROM, how to solve the issue please on p10 lite?
thanks ;D
Did you find a fix?
I recently rooted my samsung s8 and installed & updated magisk manager. I tried installing a few modules from magisk but despite the fact that everything seemed to work in the magisk terminal and the app saying that the modules were ok, nothing works. By doesn't work i mean that it doesn't show up,doesn't apply any fonts or boot animations etc. Any ideas?
SteliosPapamichail said:
I recently rooted my samsung s8 and installed & updated magisk manager. I tried installing a few modules from magisk but despite the fact that everything seemed to work in the magisk terminal and the app saying that the modules were ok, nothing works. By doesn't work i mean that it doesn't show up,doesn't apply any fonts or boot animations etc. Any ideas?
Click to expand...
Click to collapse
Try reflashing the zip from the recovery. When I was updating magisk by the recommended method it breaks, and I had to reflash every time I installed a module. Then i started using the soldier9312's custom ROM and magisk Here: www soldier9312 de (cant post links)
Hi guys!
First of all, please do not send me to somwhere on forum because I have tried dozen of ways do deal with problem. My phone is LG G6 running on android pie. TWRP installed, Magisk installed. Im trying to instal viper4droid. I have tried download module from Magisk itself, I have tried to download .apk file from different sources, I have tried to download .zip file, I have tried to installed as apk itself and grant root accesss, tried by TWRP, tried unify installers and **** knows what else. Trouble is, First few times it was installed but status was "not running", Today after many attempts to deal with that viper4droid installing drivers and.......after each reboot its doing it again. Moreover i have found that sometimes Magisk did not show up the newest version of v4a as a module to download. So......is somebody for the love of god know what the **** is wrong? thank you.
marcin3595p said:
Hi guys!
First of all, please do not send me to somwhere on forum because I have tried dozen of ways do deal with problem. My phone is LG G6 running on android pie. TWRP installed, Magisk installed. Im trying to instal viper4droid. I have tried download module from Magisk itself, I have tried to download .apk file from different sources, I have tried to download .zip file, I have tried to installed as apk itself and grant root accesss, tried by TWRP, tried unify installers and **** knows what else. Trouble is, First few times it was installed but status was "not running", Today after many attempts to deal with that viper4droid installing drivers and.......after each reboot its doing it again. Moreover i have found that sometimes Magisk did not show up the newest version of v4a as a module to download. So......is somebody for the love of god know what the **** is wrong? thank you.
Click to expand...
Click to collapse
Hi man, there are three versions of viper4ndroid on magisk, try the viper4android fx legacy materialized as normal app after disabling play protect on google playstore. hope this helps
I will try that in a minute mate.
didnt work.
I have the same problem. I switched to viper hifi and now after reboot it is working but after some time it stops till i reboot it again. I think it is because of the pie version, on oreo everything works fine. After every reboot every mofule in magisk reinstalls. For example youtube vanced instals like new and i have to set it up after the reboot.
IIRC it required me to install viperfx (the new version, not legacy or xhifi), audio modification library and audio compatibility patch, have you done that?
I have tried all three version of viper. I have isntalled it as a apk and modules in Magisk. All possible audio patches and compatibilies mods from magisk are intalled as well.
marcin3595p said:
I have tried all three version of viper. I have isntalled it as a apk and modules in Magisk. All possible audio patches and compatibilies mods from magisk are intalled as well.
Click to expand...
Click to collapse
if you still have this problem, try installing viper4android 2.7 as apk from xda lab, I was downgrading back to pie sometimes ago and couldn't get viper to work, besides the 2.7