Hi guys,
Im trying for week to install Cloudy G2 3.3 on my korean F320L model.
I was trying almost everything and all i do was to brick my phone dozen times.
So now i want someone to help me a bit.
What i tried?
1. Lollipop. I updated my stock JB room to Lollipop and then wanted to install This TWRP (f320l_lollipop.apk) but it was not working.
Everytime i was able to see an Android with open stomach and red triangle instead of TWRP. But if i install any other version of TWRP like for f320k or sth i wasnt able to install anything on it, cause my phone was crashing over and over. So i started for looking some other ways to install Cloudy G2.
2. KitKat. I updated stock JB android to KK 4.4. Then after Rooting phone i was able to install this TWRP (f320l_AutoRec.apk ) and go to recovery mode.
But the next step in All guides was to install blastgator from dorimanx and i choosed f320 version and install it. But after reebot to recovery nothing happens just black screen.
So i tried other version but everytime i failed.
Now im totally lost.
Can someone who runs Cloudy G2 3.3 on his korean LG G2 F320l how to do it?
What system i need. Witch TWRP install, Witch blastgator and what next.
Thanks in ADVANCE!
Related
Hi all,
Let me try to walk you through everything that I've done to try and get some help here.
I have an lg g2 sprint (lg-ls980)
1. When I got it I first upgraded to android 4.4.2
2. Then I rooted using stump root
3. I installed xposed and a few xposed modules....I then decided Id rather have a different rom, so
4. I used autorec (which to my understanding changed my kernel in order to workaround boot loader and install twrp? is that accurate?)
5. Booted to twrp, wiped data and installed cyanogenmod and gapps
After this I get stuck and can't boot past the lg logo, so I booted back to recovery and restored my backup. So I did the same and tried pacrom this time with the same results.
I then decided that if I'm going to be stuck with stock rom I at least want my knock on back, so I flashed the patched kernel and same thing- stuck at lg logo....
I know I downloaded the correct zip files and placed them on the root, and always wiped before flashing.
Then I went into download mode on the lg support tool to try to get back to factory, but it says my firmware and recovery is up to date. The odd thing is that the lg support tool shows my phone as ls740 rather than ls980... is this because of something that autorec changed? Do I need to download zip files for ls740 instead? So confused..
About phone in my g2s settings shows android version 4.4.2 and kernel version 3.4.0
Anyways, if anyone could help me to successfully get one of these roms to flash and get back to the kernel that supports the knock code I would really appreciate it.
Thanks in advance!
I recently updated to lollipop! My phone is lg g2 d800. I previously had rooted with twrp on Kk. I used lg flash tool to flash back stock. I got it updated to lollipop ota. I have tried lg root zip. I do everything exact. Everything works until I put phone in download mode. I do the send command to choose correct port and type commands to execute. Nothing happens I just get a flashing cursor. I have Also tried lg one click root script it also freezes at firmware update. Any help would be appreciated. I have searched the forums these Methods seem to work for everyone else. I don't know what the problem is.
Hello fellas, I have a LG G2 that had kitkat 4.4.2 before i start to try change the rom.
After read so many things here and there, i still have problems with the installation of TWRP.
Now i manage to put Lolipop 5.0.2 using the LG Flashtool 2014, because no other method worked, but i want to change for a clenaner one like cloudy or something.
But nothing works on my cellphone relative to TWRP. I made the root using LG One Clic.
I did the upgrade on the room couse I had no other choice and I decided to go stock on my cellphone...turns out that i downloaded a ROM suggested by SDK tool or another program from here (no sure) and it was a Lolipop not a kitkat as I thought it would be.
Now I want to know if anyone has an idea about how to install the TWRP so I can flash other roms easily.
---Autorec no worked;
---TWRP Manager says it doesn't have busybox and dont have my model on the list, i think I should use d802 as I read around;
---SDK Tool not worked;
I have no idea what to do next. Please, help me.
This is my first post, so I want to say "Hello" for everybody!
I need Your help. I bought a month ago smartphone LG G2 in korean version F320S. Now, I want install new soft CloudyG3 3.3 on my phone. But i can't update it to Android 5..It "says", android is newest. But it's stupid, i have KitKat on phone, and in net wrote, newest is Lollipop. When i trying installing Cloudy on KitKat, it write that file with CloudyRom is broken (i downloaded it two times). If i could download stock ROM from net, there isn't any problem, but link to stock soft on XDA for my version on F320S are "dead". For F320K and F320L are good, for my F320S isn't work. Can anyone will be so good and share with me an active link to my stock Lollipop firmware? Or will put it in share hosting, like a rapidshare.com or similar?
Well, don't install stock Lollipop, you don't need it in order to install Cloudy.
Assuming that you are on stock KitKat, unrooted - follow these steps:
1) Enable USB debugging and root the phone using DP tools
2) Find KitKat Autorec for F320S and blastagator TWRP 3.0.2-0 - copy the files to the phone, install and run Autorec like a normal app - if everything is successful it will boot TWRP 2.7 for you.
3) When you are in recovery mode - install TWRP 3.0.2-0, reboot the recovery.
4) Make a backup of the EFS and copy it to your computer, just in case.
5) Highly recommended - wipe data, cache, system, internal storage and reboot the recovery.
6) Copy the Cloudy ROM and the hybrid bootstack for F320S to your device and install them.
You're all set. It shouldn't take you more than 15 minutes.
Hi All,
I've been trying to install Cloudy G2 3.3 into my LS980 for the last probably 15 hours with no success. Each time Cloudy finish installation through TWRP and reboot, it goes into LG logo for a second and goes black screen. Can't get back into TWRP after. I can only go back into download screen. I know how to tot it back to stock but not sure what the approach is to get Cloudy 3.3 installed.
Below are the instructions I followed:
- Start with Stock rom (I've tried, 4.4.2 ZVC and 5.02 ZVH)
- Rooted with ioroot
- installed TWRP 2.7.0.0
- Installed Quickboot app
- Downloaded these in the sdcard: Cloudy 3.3, TWRP 2.8.6.0 , KK bootloader ( simpleBootstacks-ls980-nevax-KK--signed.zip )
- Reboot into recovery using Quickboot app
- Wipe davick, cache, data, system
- Update TWRP to 2.8.6.0 (also tried 3.1.1.0)
- Flashed KK bootloader simpleBootstacks-ls980-nevax-KK--signed.zip
- Press reboot into recovery
- Most of the time I will get the 1 second LG logo and goes black screen here.
- 1 time i was able to get pass that part and Flashed Cloudy 3.3 in recovery. But afterwards same thing, 1 second LG logo and goes black screen.
I can still tot it back stock but not sure what the approach is to get Cloudy 3.3 installed. (I've also tried CM13 with same results) I've looked into this quite a bit and couldn't find a solution. I read heavy emphasis on using KK boatloader and I feel like that's where my problem is but not sure what it is. It seems like the LS980 KK Bootloader is much more harder to find than the other variants. The one I found I don't know if it is correct since I haven't read many feedback on that piece.
I've also tried flashing the Boot Changer and ran into the same issue.
Any help would be much appreciated.
Really wanted to get this ROM or any battery efficient rom in my G2 since this phone dies on me very quickly being that it was bought used.