My device Lg E615 is in bootloop i am trying to reflash the stock rom on it...with proper usb drivers and flash tool everything is going well but at the start of flash tool it shows phone was not found
1. The phone wasn't rooted
2. USB debugging wasn't enabled
Guyz is there any way to enable usb debugging when device is bricked and its not rooted....plz help
Unfortunately, No. If there's a way to get into fastboot mode or firmware update, you could have hope of flashing a .kdz or .zip file, but otherwise no.
hi all
For some models I can find qpst firmware, but for some models it seems there is not such a file. Is it possible to create it from a stock rom (kdz/dz) ? I find some tools and tutorials to extract kdz/dz , but it does not create required files for qpst.
have a lg e405 with qloader 9008 on device manager.
Tnx
Hello everyone :good: ,
someone has the CSC file for Asus zenfone 3 ZE552KL?
I need to repair the IMEI for this I need to check the diag mode.
I've been researching and it seems that the only way is to install the CSC firmware and root.
actually, I have already unlocked the bootloader, I have rooted,I have enabled the USB debugging and I tried to enable the diag mode from adb commands but it didn't work ! ( my computer has installed the phone drivers and QDLoader HS-USB Driver ).
I had Android 7 but now I downgrade to Android 6 but it doesn't work either .
note: I've tried everything but nothing works, I need is to install the CSC firmware but I cant find it on the internet.
you can get back your imei simply upgrading to a latest marshmallow firmware. if not work try to flash raw firmware with asus flash tool and upgrade to latest mm firmware (UL-ASUS_Z012D-WW-13.20.10.152-user.zip)
Hi all.
I´m still searching some way to solve my problem.
What´s happaned:
was on AEX OREO, make downgrade to SLIM stock 7.1 from raystef66 = all ok. But after a couple days made magisk upgrade to 17 via twrp and after that is "death"...when I try to start my phone I can see first ZTE logo, than 3x red led, that´s all, I think after flash stockrom I lost customrecovery......?.....t I can not start to TWRP, FASTBOOD...maybe EDL working but:
When I try combo+pwr I see DFU/com4 port. So I tried guidef from raystef66 with ZTE DFU_MultiDL_A2017X_Tool = apk see my phone but still in disconect mode(conect stat) but WIN see my phone as HS USB QDlouder 9008 com 8, now I run edl tool from djkuz.
Tool see my phone, name QUALCOM HS=USB QDlouader 9008 and I tried flash edl or recovery with error = from log:
Did not receive Sahara hello packet from device miflash says can not recivie hallo pocaked.
Any new idea how to fix...?
Thx!!
trying on WIN7 pro
kraljan66 said:
Hi all.
I´m still searching some way to solve my problem.
What´s happaned:
was on AEX OREO, make downgrade to SLIM stock 7.1 from raystef66 = all ok. But after a couple days made magisk upgrade to 17 via twrp and after that is "death"...when I try to start my phone I can see first ZTE logo, than 3x red led, that´s all, I think after flash stockrom I lost customrecovery......?.....t I can not start to TWRP, FASTBOOD...maybe EDL working but:
When I try combo+pwr I see DFU/com4 port. So I tried guidef from raystef66 with ZTE DFU_MultiDL_A2017X_Tool = apk see my phone but still in disconect mode(conect stat) but WIN see my phone as HS USB QDlouder 9008 com 8, now I run edl tool from djkuz.
Tool see my phone, name QUALCOM HS=USB QDlouader 9008 and I tried flash edl or recovery with error = from log:
Did not receive Sahara hello packet from device miflash says can not recivie hallo pocaked.
Any new idea how to fix...?
Thx!!
trying on WIN7 pro
Click to expand...
Click to collapse
First: did the DFU see a com port in the config?
You do have to select the com port manually.
Second: can you boot to FTM?
Third: try another Edl package, some Edl have to be installed as a backup restore not via a straight flashing.
thx for quick answer!
1 see pic pls, in DFU com4
2 no can not get to FTM
3 tried 3x another packages...see log/pic from ZTE EDL tool...
kraljan66 said:
thx for quick answer!
1 see pic pls, in DFU com4
2 no can not get to FTM
3 tried 3x another packages...see log/pic from ZTE EDL tool...
Click to expand...
Click to collapse
Use the latest MiFlash. I've been having trouble with EDL Tool lately. Maybe it'll work. z
I'm guessing the red LED turns off as soon as you connect MultiDL correctly?
Make sure Edl tool is in the root directory of you PC or laptop drive.
EG: C:\ or D:\ as per the instructions.
Make sure you run it as admin too.
If I remember correctly the full Edl package had to be placed into the appropriate folder as per instruction (via the tool) and on the post.
@Syberclone:
I have all as you write...in root, edl package is correct/about edl package edl tool says "success = tried 4different edl package for my phone"/
I´m convinced about a port problem, log from edl tool is:
15:47:25: INFO: User wants to talk to port '\\.\COM8'
ERROR
15:47:25: {ERROR: OpenPort:5198 Failed to open com port '\\.\COM8'
I´ll try another miflash but dont believe ...:-/
just used another PC with WIN7 and now.....CHEEEEERS!!!!!!
Thx to all!
Hello. Does anyone know how to enable diag mode on V35?
Thanks.