My device Lg E615 is in bootloop i am trying to reflash the stock rom on it...with proper usb drivers and flash tool everything is going well but at the start of flash tool it shows phone was not found
1. The phone wasn't rooted
2. USB debugging wasn't enabled
Guyz is there any way to enable usb debugging when device is bricked and its not rooted....plz help
Unfortunately, No. If there's a way to get into fastboot mode or firmware update, you could have hope of flashing a .kdz or .zip file, but otherwise no.
Related
Hi, you may all be so used to this, however, this is my first time. I rooted my LG G2 F320S and installed custom recovery (CWM). Well, I thought I followed the instructions to the letter. However, my phone is now stuck at the LG boot logo. Anyway, I am now just planning on going back to stock. However, after installing the LG drivers, my PC detects the phone (while in download mode) as unknown device. I don't know what to do. I tried to right-click the item in the device manager and update drivers, but window's can't find the appropriate drivers. I can't boot to recovery, but while in download mode, PC can't recognize the device? Anyone can help me out? It would be greatly appreciated. Thanks.
1. Uninstall LG drivers
2. If u have Windows 8, put it in mode which allows to install unsigned drivers, just to make sure (hold Shift and choose to reboot in this thingy on the right)
3. Plug it in with download mode and install THESE http://tool.xcdn.gdms.lge.com/dn/downloader.dev?fileKey=UW00120120425 drivers
Hi reas0n, thanks for your reply. I did follow your suggestion, however, it's still the same case.
Any help, guys?
I have a new and unique problem with my set Ls980 (LG G2). I dig down all xda and other forums from last week. But no use till now. So i need some good help from experts . Ok here is the situation . I have Lg g2 ls980 (sprint) i rooted it to flash some LP custom rom in it. i installed RECURRECTION REMIX LOLLIPOP ROM in it successfully along with it's gapps. After reboot i got my phone in boot loop. now the current situation is that
1- I have nothing on my phone everything wiped out. no rom backup or anything else on my phone memory.
2- I have stock recovery (pictures attached).
3- I have broken download mode. ( so i can't attach my phone to lg flash tool) picture attached.
4- I am stuck on boot loop with cm11 M5 ( last rom installed using adb sideload option from stock rom)
5- No fastboot mode.
Please guide me to recover my soft bricked phone.
Did you try Tot method? What happens when you plug your phone to pc? Does adb recognize your device?
ceza1380 said:
Did you try Tot method? What happens when you plug your phone to pc? Does adb recognize your device?
Click to expand...
Click to collapse
How can i try tot method without going to download mode ? as i said phone only have stock recovery , Yes there is an option in stock recovery "Apply update from ADB" by selecting that i can run adb sideload commands. And i can flash any zip rom from that option . I tried several rom's using this option but installation aborted in middle .
Does device manager in Windows recognize your device? In Tot method you do port settings to flash kdz. Also you can give it a try for LG pc suite.
My LG G2 d802 is stuck in the download mode and has no recovery. It happened when i flashed Miui 6 by gtbluesky after full wipe of data and system. Previously it was on cloudy 3.2 . After flashing the miui it wont boot and is in a bootloop on mi bootscreen. I tried but cannot boot into recovery seems like it doesnt have a recovery.
However, I can boot into download mode but it is not recognised in ADB nor Lg flash tool. I tried flashing kdz with the lg flash tool but it wont detect the device. I tried installing various drivers to the pc and also tried two different pc with windows 7. However, adb wont detect the device.
Regarding the drivers, the windows installs all the drivers but fails to install the LGE Androidnet usb modem drivers. If i manually try to install it from the lg drivers, it would keep installing and returns an error of timeout period expired.
So, i am stuck in the download mode with a bricked device.
If Someone could help me with this problem, i'll be much obliged. Thanks
SOLVED
[SOLVED] I downloaded the .tot file for my phone and extracted .dll from one of the .kdz & flashed it using the lg flash tool . It flashed good and now my g2 is up and running. :good:
So when i put the phone in download mode, nothing happens.. it's like nothing is attached to the PC. No unrecognized device in device manager, nothing at all..!!
MTP is working fine, LG drivers are installed on PC too. USB OTG works while in recovery too.
I am on a Win 8.1 operating system. My phone has a custom rom and recovery. Blisspop v4.0.1 and TWRP v2.8.7.1 to be exact.
Anything that could fix this Download Mode issue? I really wanna flash the stock ROM. Or should i go ahead and flash the flashable zip of the stock kdz?
1. Try a different USB Port, USB Cable or PC/Laptop.
2. Uninstall Drivers ,download & install latest drivers if Verizon use the Verizon drivers. (If you were previously on Stock lillipop you really need to do this)
3. if none of above helps try the Custom Zip file...
Maybe try a different os?
Hello
I'm new here, I've been modding my lg a few times, always when bricked, kdz or tot files were saving me.
But now I've got real problem.
I was changing ROM from Cyanogen 13 to Cloudy 3.3. I thought I just need to flash rom via recovery (2.8.7.3 bump blastagator). Flashed fine, without any troubles, but when it came to reboot, phone just got stuck on LGs logo.
I knew i f*ed up.
Recovery isn't working, but Download Mode is turning on normally, at least it seems to.
So i tried to flash KDZ, but LG Flash Tool immedently shuts down giving "lg user...." error (don't remember what exacly it was saying).
Then i tried via tot files. But after installing drivers from tutorials, device isn't showed as "LGE AndroidNet USB Serial Port", but as few positions like MTP device or usb serial port(but not in Com ports) and all are marked as devices without drivers. Flash tool for tot also didn't worked here, because it did't found device.
What can i do now? Please help me.
[Edit]
So now, using different drivers somehow Jelly Bean installed by tot method (device didn't appeared as tutorial said, but it worked) phone is booting normally, but i can't again install lollipop with kdz files.
I was trying 3 different drivers, every giving instant error of flash tool.
What can I do now?
[EDIT2] LGUSERCSTool.exe is crashing. How can I install lollipop now?
Are there tot files for lollipop?