Hey,
I've tried to flash my lg g2 d802 with CM 11 with TWRP recovery
after 5 minutes is says : "fail"
I selected reboot system the phone stuck on the lg logo and the phone won't boot
then I've wipe everything
tried to boot the phone the phone won't boot
then i read a thread on XDA : http://forum.xda-developers.com/showthread.php?t=2451696
via "terminal command" method and the phone won't boot
then I booted the phone into download mode and downloaded kdz file then i tried to use the flash-tool and I have the "lg drivers" and also "lg-mobile support tool"
then the flash-tool is not responding :/
so what i can do ?
and should I wait for kitkat official update or flash rom ?
and if I want to flash rom which one is better for lg g2 d802 ?
Well did you make a backup b4 you tried flashing the rom to restore it if anything were 2 go wrong ? Its most likely it flashed partially but it wiped your original rom thats why u couldnt boot . if you can still boot into recovery mode try flashing a diffrent rom if you have any downloaded
Hellfire and liquidsmooth are best 4.4 roms...
Try installing these roms..
Hey everyone I'm quite new to android, and I'm currently stuck in Download Mode after trying and failing to install Twrp
I was previously Rooted, tried to install Twrp via Autorec, however when I ran the app it soft-bricked my phone and put me into Fastboot mode.
I followed http://forum.xda-developers.com/show....php?t=2476972 method, and got back to Download Mode.
I am currently in the middle of returning to stock through http://forum.xda-developers.com/show....php?t=2432476 using the .TOT method.
I'm fairly close to repairing it but my only issue is that I cannot get my computer to recognize my phone. Neither in Device management nor adb devices anymore.
Therefore I cannot change the port to COM 41 to flash the .TOT file.
I constantly tried installing drivers for the phone both 3.10 and 3.08 but still no recognition can anybody help?
Some more info about the phone:
it's the D801 variant but its on Wind (Canada) not T-mobile
it was previously Rooted
it did not have any recovery software installed
no roms had been flashed previously.
Rogybear said:
Hey everyone I'm quite new to android, and I'm currently stuck in Download Mode after trying and failing to install Twrp
I was previously Rooted, tried to install Twrp via Autorec, however when I ran the app it soft-bricked my phone and put me into Fastboot mode.
I followed http://forum.xda-developers.com/show....php?t=2476972 method, and got back to Download Mode.
I am currently in the middle of returning to stock through http://forum.xda-developers.com/show....php?t=2432476 using the .TOT method.
I'm fairly close to repairing it but my only issue is that I cannot get my computer to recognize my phone. Neither in Device management nor adb devices anymore.
Therefore I cannot change the port to COM 41 to flash the .TOT file.
I constantly tried installing drivers for the phone both 3.10 and 3.08 but still no recognition can anybody help?
Some more info about the phone:
it's the D801 variant but its on Wind (Canada) not T-mobile
it was previously Rooted
it did not have any recovery software installed
no roms had been flashed previously.
Click to expand...
Click to collapse
Try to restore your phone using the official LGMobile Support Tool. Just switch on normally the phone, plug it to your PC and wait for your kdz to be downloaded. Once it done, it should install the kdz by itself. Then factory reset your phone (if needed) as it should ask you some pin/password.
Hope it'll help you as it did for me!
Guys i need your help, I screwed my phone BADLY. I have D802 from Hong Kong
TOT flashing method starts, flash until 80%, phone restarts, the FlashTool gives meddage FBOOT fail. Flashing fails.
Phone restarts until LG logo and the diode is blinking colors.
There is only download mode available.
Please is there ANY solution? Even guys on IRC #lg-g2 channel couldn't help me.
What i did before:
1. rooted my phone
2. instal autorec, which screwed phone. after that only flashboot mode worked
3. i flashed laf.img to restore download mode, it worked
4. i flashed aboot, tz, rpm, it allowed me to boot into system but screwed touchscreen
5. i flashed TOT with dll from this post http://forum.xda-developers.com/showthread.php?t=2687768
Bricked D802 FlashTool Fail Fix
but then phone freeze at LG logo and nothing happens. No recovery, no fastboot, only download mode.
please! anyone knows what to do?
collller said:
Guys i need your help, I screwed my phone BADLY. I have D802 from Hong Kong
TOT flashing method starts, flash until 80%, phone restarts, the FlashTool gives meddage FBOOT fail. Flashing fails.
Phone restarts until LG logo and the diode is blinking colors.
There is only download mode available.
Please is there ANY solution? Even guys on IRC #lg-g2 channel couldn't help me.
What i did before:
1. rooted my phone
2. instal autorec, which screwed phone. after that only flashboot mode worked
3. i flashed laf.img to restore download mode, it worked
4. i flashed aboot, tz, rpm, it allowed me to boot into system but screwed touchscreen
5. i flashed TOT with dll from this post http://forum.xda-developers.com/showthread.php?t=2687768
Bricked D802 FlashTool Fail Fix
but then phone freeze at LG logo and nothing happens. No recovery, no fastboot, only download mode.
please! anyone knows what to do?
Click to expand...
Click to collapse
First double check that you can enter recovery. Hold the power button until the phone completely shuts down. Wait 5 seconds. Then hold power + volume down until it vibrates and LG logo shows up. Release both buttons. Then press them again quickly and hold them. You will enter recovery. Or the phone my offer to do a factory reset which btw won't happen since it will go to recovery by pressing the power button 2 more times. If you have TWRP then you are good. Install ADB on your PC and the LG drivers. When you have ADB, Download (check everything) related to JB and KK. Reboot the PC. Connect your phone with the cable. The PC will not recognize the phone. You have to use a little trick in the device manager first:
Press the windows key + pause/break and click on device manager. Right click on the faulty device with the yellow exclamation mark and hit properties then update driver. Click on the second option then from the list search for ADB or ADB device or something along those lines. Select the LG driver and hit OK. Unplug the phone. The phone must be in recovery still. Inside recovery hit advanced and look for ADB sideload. Check both checkboxes on what to wipe. If you don't already have a rom you want to flash, then use this one. It is a very stable and fast one and I only recommend it because I had the same issue as you and it worked for me. Download that rom and rename the zip file to rom.zip and copy it to the location where your adb.exe file is. You will also need the KK baseband modem otherwise auto rotation won't work. Search for it on the D802 dev thread. Now on your PC, open a command prompt inside the directory you copied the rom.zip (shift + right click) and hit "open command prompt here". Type in:
adb devices (this will ensure that your connection with the phone is alive. If you see some weird string then it works. That is the name of the phone btw)
adb sideload rom.zip
Click to expand...
Click to collapse
Installation will now begin. You are saved.
Of course all the above only applies if you have acces to recovery. But I wonder how could you screw that one up. It's literally a simple apk installation and a 1 button solves everything app. If you don't have recovery you can still try to save your phone with download mode. Here is a link that maybe helps but I havent tested it
And one last thing: Don't use Flashtool.
thanks man. But unfortunately no recovery. The phone ONLY goes to download mode.
I will try to flash .kdz because tot method didn't work. If .kdz fails then i don;t know.... expensive paper holder
collller said:
thanks man. But unfortunately no recovery. The phone ONLY goes to download mode.
I will try to flash .kdz because tot method didn't work. If .kdz fails then i don;t know.... expensive paper holder
Click to expand...
Click to collapse
I have the same problem as you, my PC don't recognize the phone.
try resetting it with combo keys
Guys plz help
D802 flashed with wrong laf.img now i have this error in lg flash tool.
Same problem here only download mode is working and it gives error when I am trying to install tot LAF retrieveGPT() Failed. is there any solution for it?
if its from hong kong are you sure its a d802 and not a ls980 or d800? maybe its a refurbished phone.
raptorddd said:
if its from hong kong are you sure its a d802 and not a ls980 or d800? maybe its a refurbished phone.
Click to expand...
Click to collapse
when mine use to work fine it showed d802 but mother board is writen ls980 ...
what should i do ?
devil ££ sama said:
when mine use to work fine it showed d802 but mother board is writen ls980 ...
what should i do ?
Click to expand...
Click to collapse
then your phone is refurbished, if motherboard shows ls980 then you must go back to stock. and from now on use ls980 stuff thats your variant.
flash original LG firmware going back to stock to wipe all and start fresh and new..
how to on link below.
http://forum.xda-developers.com/showthread.php?t=2432476
raptorddd said:
then your phone is refurbished, if motherboard shows ls980 then you must go back to stock. and from now on use ls980 stuff thats your variant.
flash original LG firmware going back to stock to wipe all and start fresh and new..
how to on link below.
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
so i force inter qsusb_ bluck and use skrtool to flash ls980 partition then flash sprint stock rom ?
(in case i wanted to install twrp and install cloudy rom i should use autorec for ls980 varaint ? )
devil ££ sama said:
so i force inter qsusb_ bluck and use skrtool to flash ls980 partition then flash sprint stock rom ?
(in case i wanted to install twrp and install cloudy rom i should use autorec for ls980 varaint ? )
Click to expand...
Click to collapse
when i had QUSB_BULK error and many drives all i did was go back to stock.. using flashtools. and stock firmware..TOT method.
sprint is ls980 then yes, and yeap, from now on use autorec for ls980.. all that you use should be for ls980. goo luck
on the QHUSB i just went into download mode and flash then it worked okey.
raptorddd said:
when i had QUSB_BULK error and many drives all i did was go back to stock.. using flashtools. and stock firmware..TOT method.
sprint is ls980 then yes, and yeap, from now on use autorec for ls980.. all that you use should be for ls980. goo luck
on the QHUSB i just went into download mode and flash then it worked okey.
Click to expand...
Click to collapse
i did every thing right fone stared am i updated to lolipop but nfc and network or sim card don't work ( any fix ? i use algerian operator sim card )
devil ££ sama said:
i did every thing right fone stared am i updated to lolipop but nfc and network or sim card don't work ( any fix ? i use algerian operator sim card )
Click to expand...
Click to collapse
was it working before.?
http://forum.xda-developers.com/showpost.php?p=66244741&postcount=6567
raptorddd said:
was it working before.?
http://forum.xda-developers.com/showpost.php?p=66244741&postcount=6567
Click to expand...
Click to collapse
Yes it was but on the old software witch reconized the phone as d802.....+ am getting activation message every time am connected
devil ££ sama said:
Yes it was but on the old software witch reconized the phone as d802.....+ am getting activation message every time am connected
Click to expand...
Click to collapse
post your question here explan in detail all you did and where are you now , i hope you get help here.. then when fix post back with the fix.
http://forum.xda-developers.com/showthread.php?t=2432476
huzaifaas said:
D802 flashed with wrong laf.img now i have this error in lg flash tool.
Click to expand...
Click to collapse
Have the same issue on D802 G2 here. How'd you solve it?
Hi my G2 D802 does not go in donwload mode, i tried with adb too. It's stock with v20h (updated evrytime via OTA), It's not bricked, i just want to update to v30d with flash tool.
I tried with 2 pcs.
EDIT: FIXED with LG PC SUITE!
paolotheking said:
Hi my G2 D802 does not go in donwload mode, i tried with adb too. It's stock with v20h (updated evrytime via OTA), It's not bricked, i just want to update to v30d with flash tool.
I tried with 2 pcs.
EDIT: FIXED with LG PC SUITE!
Click to expand...
Click to collapse
How exactly did you fix that with LG PC Suite? I've been facing the same problem - No Download mode while I'm completely stock.
I can give you the laf.img file from the AutoRec, or you can do it yourself, use 7zip to extract the APK file then reflash laf.img, it will get you into download mode.
DON'T boot /system or you may very well lose your entire internal memory as I'm not sure if this damages the loki'd bootloader. In that case you'll have to manually boot a TWRP recovery.img to reflash your ROM.
My LG G2 d802 is stuck in the download mode and has no recovery. It happened when i flashed Miui 6 by gtbluesky after full wipe of data and system. Previously it was on cloudy 3.2 . After flashing the miui it wont boot and is in a bootloop on mi bootscreen. I tried but cannot boot into recovery seems like it doesnt have a recovery.
However, I can boot into download mode but it is not recognised in ADB nor Lg flash tool. I tried flashing kdz with the lg flash tool but it wont detect the device. I tried installing various drivers to the pc and also tried two different pc with windows 7. However, adb wont detect the device.
Regarding the drivers, the windows installs all the drivers but fails to install the LGE Androidnet usb modem drivers. If i manually try to install it from the lg drivers, it would keep installing and returns an error of timeout period expired.
So, i am stuck in the download mode with a bricked device.
If Someone could help me with this problem, i'll be much obliged. Thanks
SOLVED
[SOLVED] I downloaded the .tot file for my phone and extracted .dll from one of the .kdz & flashed it using the lg flash tool . It flashed good and now my g2 is up and running. :good: