I installed Euro firmware, on the second flash everything just stay'ed black, and I waited awhile till I decided to power off then power back on. First thing I saw was AT&T connect boot screen, then it went black but I can still hear Samsung's power up theme, also device has a Vertical Line running down the right side. I noticed that If I press power button twice Tab comes on, and everything looks great, so I rooted my device and installed Titanium Backup,Everything seems okay. So my question is how do I get rid of the AT&T Boot logo and to be able to see Samsung logo on boot?
\\\\\\\Exactly what happens on fresh boot/////
-fresh boot- AT&T Connected screen comes up, then screen goes black with the line on the right, then Samsung's power up theme song comes on buttons light up screen stays black line goes away, then screen still black, then to initialize the screen I press power button twice. Comes on and works fine.
****Would love to fix that part, I would be most greatfull for life! Willing to pass on info, to all who want more!****
*need help on pre-installed boot screen*
I installed Euro firmware, on the second flash everything just stay'ed black, and I waited awhile till I decided to power off then power back on. First thing I saw was AT&T connect boot screen, then it went black but I can still hear Samsung's power up theme, also device has a Vertical Line running down the right side. I noticed that If I press power button twice Tab comes on, and everything looks great, so I rooted my device and installed Titanium Backup,Everything seems okay. So my question is how do I get rid of the AT&T Boot logo and to be able to see Samsung logo on boot?
\\\\\\\Exactly what happens on fresh boot/////
-fresh boot- AT&T Connected screen comes up, then screen goes black with the line on the right, then Samsung's power up theme song comes on buttons light up screen stays black line goes away, then screen still black, then to initialize the screen I press power button twice. Comes on and works fine.
****Would love to fix that part, I would be most greatfull for life! Willing to pass on info, to all who want more!****
Install euro firmware with bootloaders. JJ4 is good one since it's bootloader is not signed. Then you can install newer euro firmware over it.
However, so far there is no known way to go back to AT&T bootloaders. So you ca't fully restore to AT&T if needed.
Sent from my GT-P1000 using XDA App
Thanks
Thank you for your reply, I will think about it! Seem's I have to make a choice. But at least there is a way to fix the problem.
Thanks!!!!!!!!!!!!!!
I got a samsung vibrant Tmobile and after flashing a custom Rom
I got AT&T bootup screen! Any answer will be appreciate !
There is a thread for this titled "How to fix at&t black screen with thin white line at boot up". I know you can find it by searching - I wrote it.
Got my S7 Edge for just over a month now, and yesterday it started showing a black screen from time to time when navigating the phone. Note that I haven't dropped the phone, changed anything to it or made it wet. So after the black screen flickering, it only got worse, the black screen appears everytime for like half a second when i touch the screen, and when it gets noticably hot it simply stays black with rainbow lines flashing over the black screen.
Booting in safemode doesn't help. The flickering seems to be reduced just a little when I put it in the charger.. Not sure why.
I feel let down by Samsung (again), and I am bringing it to the service center tomorrow to have it fixed (and trade / sell it when I get it back) but I wanted to make 1 last cry for help on XDA, since maybe someone has a magical solution that will prevent me being without a smartphone for 2 weeks+.
Thanks a lot in advance.
Nothing we can do.
Factory reset phone is your last resort.
Today I got an issue from my phone! it was working fine, I was using youtube app and suddenly crashed and reboot causing to get a red screen, is full screen or partial.
prnt. sc/ f2gkw0
prnt. sc/ f2gkow
I tried to fix it using the *#0#*, but nothing happended.
Pls need help!
red screen problem s8 and s7 edge now?
I have a Samsung Galaxy S6 Edge Plus from Rogers that is not under warranty anymore. Recently, my phone started getting stuck, so I did a factory reset. I tried flashing it using Odin but I think I messed up. Now, whenever I turn my phone on, it remains in the boot screen "......powered by Android" for a bit and then the screen goes blank with the blue static light on top left. I can see that holding down the volume-down+home+power button works as I am able to go into download mode. But if I use volume-up_home+power. The phone stays in the "....powered by Android" screen and then moves to Installing Software Updates (blue screen) and then comes back to ".....powered by Android". Then the screen goes black after a while with the static blue light on top-left and it remains like that until the battery runs out.
I see that I am able to connect to Odin in download mode. Need your help in getting my phone into a working. I am new to this so would need some instructions/links on what and how to install the latest rom on my device and get it to work. I cant use this device anymore and would like to get this phone into a state where I am able to use it and return by friend's old phone which I am using as a loaner.
flash the stock rom using odin
make sure that you're using the LATEST firmware for your phone model. refer to the box
I recently got a 2nd hands S7 Edge. It had a software issue (I'm guessing he tried to install a custom Rom but forgot to unlock the BL...). So I reinstalled stock android 8.0.0 and it went successful. Before I installed android, it already had a glitchy flickering screen. When brightness is MAX and it's on AUTO, most of it disappears. But when the phone gets a little hot, it comes back. This is very annoying since it's on the bottom of the screen and there are a lot of buttons there, so I can't really see where I'm pressing. I have tried master reset via android recovery. Nothing happened. I have also tried via safe mode, still the same. I have checked the Liquid Damage Indicator and it's still good. There aren't any major scratches on the screen. Just a some small scratches on the home button. And the glitch already appears when the Samsung logo comes up. Idk if this is useful but the glitch isn't visible in a SS.
I hope someone can help me with this.
I will post pictures in like an hour, because this is the only phone I have access to.
Thanks in advance!