Hi I purchased a Xtrons TD618AS 5.1 head unit and installed into my ford galaxy no problem, worked fine.
However I now want to swap this into a VW T32 Transporter. This is a full canbus vehicle so I will probably need a canbus adapter which I'm looking for as xtrons can't supply what I need.
What I really need to know is what do the canbus settings in the password protected factory menu do? What do they enable? Will they only work with a dedicated canbus adapter.
Would be most grateful for any help.
Thanks.
Sent from my HTC One M9 using Tapatalk
Related
Hi, I need help
I bought an android Px5 unit, from aliexpress, specifically from the brand Cusp model HY272L, for my hyundai i20 (2018). I did not know what it was because I actually bought this:
https://es.aliexpress.com/item/IPS-DSP-Android-8-0-4G-android-7-1-2-DIN-CAR-Multimedia-reproductor-de-DVD/32966026399.html[/url]
In different messages with the seller I told him that I wanted to keep all the functions of my original car radio, Steering wheel control, original mic, rear camera with dynamic guidelines (the guides move when turning the steering wheel) etc ... the seller told me that for that I had to buy canbus aswell. So I bought the unit and the canbus.
When the package arrived, only the device arrived and not the canbus. When I got in touch with the seller, he told me that the canbus is internal. Is this possible? I have connected the px5 to my car and the dyinamic guidelines do not turn with the steering wheel. I have also seen that pins A1 (can_rx) and A2 (can_tx) are empty, but it has a USB that comes out of the harness of the car. I did not connect it, it scared me. Could it be that it somehow connects there?
Can someone help me? Can the canbus be internal? If so, do I have to configure something? Have i been ripped off?
Please help me.
Thanks.
Hi, I need help
I bought an android Px5 unit, from aliexpress, specifically from the brand Cusp model HY272L, for my hyundai i20 (2018). I did not know what it was because I actually bought this:
https://es.aliexpress.com/item/IPS-DSP-Android-8-0-4G-android-7-1-2-DIN-CAR-Multimedia-reproductor-de-DVD/32966026399.html[/url]
In different messages with the seller I told him that I wanted to keep all the functions of my original car radio, Steering wheel control, original mic, rear camera with dynamic guidelines (the guides move when turning the steering wheel) etc ... the seller told me that for that I had to buy canbus aswell. So I bought the unit and the canbus.
When the package arrived, only the device arrived and not the canbus. When I got in touch with the seller, he told me that the canbus is internal. Is this possible? I have connected the px5 to my car and the dyinamic guidelines do not turn with the steering wheel. I have also seen that pins A1 (can_rx) and A2 (can_tx) are empty, but it has a USB that comes out of the harness of the car. I did not connect it, it scared me. Could it be that it somehow connects there?
Can someone help me? Can the canbus be internal? If so, do I have to configure something? Have i been ripped off?
Please help me.
Thanks.
Hello...
Not sure if this is the correct forum for this or not so apologies.
I've just bought and installed a chinese Android Auto head unit into my Ford S Max. I think the unit is an XY Auto 3.1 8227L, nothing on the box but this is what is specced in the system info. I've purchased a Connects2 Canbus adapter to use with this so that i can retain steering controls etc.
Everything is all wired up correctly and working but I can't find Connects2 in the Canbus setup list or a Ford S Max under any of the other canbus manufacturers. Does anyone know how I can sort this out?
Other issue is that I no longer get my parking sensor beeps - does this go through the canbus as well?
Not fitted a aftermarket unit in years so no real experience with canbus setup.
Thanks
You need to have a look at the right forum... I asked a mod to move your posting to the right one: https://forum.xda-developers.com/android-auto/android-head-units
Hi There,
I've just grabbed a PX6 Android head unit for my Renault Clio 4 2017 from AliExpress and all seems well with exception to the steering controls.
I've tried all the WheelKey/JoyKey/SteeringKey apps and settings on the tablet with no progress, doest even register the keys. My guess is there is a Canbus issue as I can't seem to get any car info on the tablet (car info show no info on engine/battery/doors etc) and the tablet seems to work exactly the same with or without the canbus fitted. The factory settings appear to be all fine but im not sure if there's a good resource out there for correct settings.
Canbus is RN-SS-06 20191206 SW: v1.020004BYPS
Any help would be super appreciated.
Sam
I bought Klyde unit for my 2015 Clio RS about two years ago. Couldn't get steering wheel buttons work. I bought new canbox. No joy. I know other guys that have the same unit and they have it all working.
I hope that someone can find ways to get it done.
Please share if you find resolution.
Sent from my Nokia 7 plus using Tapatalk
good morning ,
I have a problem getting the canbus to work on a junsun android 11 radio with 4g ram and 64g memory. I have Renault Clio 4 from 2017 . I already managed to enter the 8888 from the factory, but I can't add the canbus in my Renault Clio 4 2017, I've already made several settings and nothing and I've also done a reset several times and nothing...can someone help me? thanks
Hi all just fitted a Sinosmart head unit for a Nissan quashqui j10 but the steering wheel buttons will not program any ideas how to fix this ? Purchased from Ali Express. Info supplied not great.
What does seller suggest
what has been tried
what is head unit - post android system head unit including MCU version
Said they are sending ma a new cable but not sure that’s going to work as canbus not recognising
Have you connected to power to the canbus unit. Mine hasa separate power connector. Took me weeks to realise I had not connected it.
Mike Tigerman said:
Hi all just fitted a Sinosmart head unit for a Nissan quashqui j10 but the steering wheel buttons will not program any ideas how to fix this ? Purchased from Ali Express. Info supplied not great.
Click to expand...
Click to collapse
Hii, first check canbus if connected right, then when in Androisd go to car settings / infotainment - info of device and enter factory settings with pin 123456 or 8888, find canbus menu for updating (not system !) and update online (choose your model of your car and year, canbus name must be exact as says at the background of the canbus box - raise, general, hiworld etc.) or offline (via USB DRIVE if seller sent you to import correct files into unit).
When downloaded correct settings for canbus , updated and restarted with correct settings car functions will work.