My Yureka is hardbricked. - YU Yureka Q&A, Help & Troubleshooting

as i was having a bootloop problem when i tried to root my Yureka which was on Lollipop.
So searched for a softbrick fix guide and I used the yureka fastboot tools with cm11 stock by allflash.bat.
the procedure finished and the cmd window closed but when i pressed the power button it won't start.
when i connect it to the PC it won't recognize.
I think I have hardbricked my phone because i flashed a 32bit over a 64bit.
can anyone help me please?
some guide as to revive my phone?
Also my phone is not in the warranty period anymore.
I'll really appreciate if someone gives me a fix for this.

You shouldn't have used a batch file like allflash.bat - Did you notice any errors/issues while flashing the ROM ?
Follow this blog step by step - http ://webtrickz.com/how-to-downgrade-yureka-from-cm12-lollipop-to-cm11-kitkat
All should be good. Best of Luck.

dalvi.nishant9 said:
as i was having a bootloop problem when i tried to root my Yureka which was on Lollipop.
So searched for a softbrick fix guide and I used the yureka fastboot tools with cm11 stock by allflash.bat.
the procedure finished and the cmd window closed but when i pressed the power button it won't start.
when i connect it to the PC it won't recognize.
I think I have hardbricked my phone because i flashed a 32bit over a 64bit.
can anyone help me please?
some guide as to revive my phone?
Also my phone is not in the warranty period anymore.
I'll really appreciate if someone gives me a fix for this.
Click to expand...
Click to collapse
http://forum.xda-developers.com/yureka/help/recover-yu-yureka-softbricks-hardbricks-t3477139

Related

[Q] I Soft bricked my yu yureka,plz help!

Dear sir,
i tried to factory reset my phone and when phone rebooted YU logo shown up but after that nothing happened ,it didn't load up,black screen,shut down again.(SOFT BRICK).
i tried many attempts to install stock recovery using fast boot mode,but in cmd it ends up showing waiting for device.
i think usb debugging was disabled,that's why it is showing waiting for devices,and hence i cannot install stock recovery and reboot my phone. So is there any way to fix "waiting for device" ,is there any way to enable usb debugging even if i cannot start my phone . I need your your help ASAP.
3skanurag said:
Dear sir,
i tried to factory reset my phone and when phone rebooted YU logo shown up but after that nothing happened ,it didn't load up,black screen,shut down again.(SOFT BRICK).
i tried many attempts to install stock recovery using fast boot mode,but in cmd it ends up showing waiting for device.
i think usb debugging was disabled,that's why it is showing waiting for devices,and hence i cannot install stock recovery and reboot my phone. So is there any way to fix "waiting for device" ,is there any way to enable usb debugging even if i cannot start my phone . I need your your help ASAP.
Click to expand...
Click to collapse
yes it is soft brick. i face same problem. but make sure your pc has successfuly installed adb drivers.
if drivers are not working so you will see waiting for device.
It is fixed now i used pdanet+ then adb then flashed cm recovery then removed battery and plugged in and then it started.
3skanurag said:
It is fixed now i used pdanet+ then adb then flashed cm recovery then removed battery and plugged in and then it started.
Click to expand...
Click to collapse
i have solution for soft brick. download fast boot stock images and follow procedure.
Link for fastboot rom
Link for tool and guide in this link you will see procedure also just scroll down in this page
ashish_zarekar said:
i have solution for soft brick. download fast boot stock images and follow procedure.
Link for fastboot rom
Link for tool and guide in this link you will see procedure also just scroll down in this page
Click to expand...
Click to collapse
i tried the method you mentioned following this guide
http://www.thetechnotriad.com/326/ho...oot-yu-yureka/
the phone is working good the only major problem whatsapp is not opening...when clicked opens for 0.01 sec and returns back to previous screen (flashes) ....please somebody help me with this. Thanks in Advance.

My Gionee E7 32 GB soft bricked - no idea what to do

There are a few threads in the forum about how to unbrick a hard bricked device. But only vague directions how to unbrick a soft bricked device.
My phone can be booted into fastboot mode. It is recognized by the PC but when I use command prompt and write fastboot devices nothing happens. I have installed the driver. Also my phone cannot enter any kind of recovery cause it's bricked. Only the red logo appears and nothing else.
I see there are issues with using fastboot on Gionee E7. Did anyone solve them?
I would be grateful if anyone of the members explain how to unbrick the device or show me a proper article or thread.
Thanks
same problem with me... anyone solve this problem? pls. help
plamanov said:
There are a few threads in the forum about how to unbrick a hard bricked device. But only vague directions how to unbrick a soft bricked device.
My phone can be booted into fastboot mode. It is recognized by the PC but when I use command prompt and write fastboot devices nothing happens. I have installed the driver. Also my phone cannot enter any kind of recovery cause it's bricked. Only the red logo appears and nothing else.
I see there are issues with using fastboot on Gionee E7. Did anyone solve them?
I would be grateful if anyone of the members explain how to unbrick the device or show me a proper article or thread.
Thanks
Click to expand...
Click to collapse
Download the Kitkat update, search google or the forum for it. Rename the update to update.zip then switch off your phone and connect it to your computer. It will open up live a flash drive then copy the file to the phone. Unplug the phone and switch off and then on. It should boot into recovery. In recovery, select the option that says update from sd card. It will show you an explorer view, then look for the update.zip, select it and let it install. Once its done switch of your phone and then on back. It should working now. It may take a while to boot for the first time.

Lg G2 Brick Need Help!

My phone was really slow and it was lolipop. When i try to open same apps it stucked. Then i decided to install cm 12.1. I did it before. My phone was rooted and installed TWRP. But idk why i couldn't open the TWRP then i tryed to flash TWRP again. Boom i restart my phone in to recovery and now i can not open it. It is just a black screen, no logo, no download mod and when i plug my phone to pc. Pc gives error that wants me to format partitions.
Pls help. i am using D802TR LG g2
Hi, you've a SECURITY ERROR, it happened also to me, so don't worry. Maybe you've flashed something not fully compatible with your bootstack, or flashing procedure gave a error. Anyway, try to follow these steps:
http://forum.xda-developers.com/showpost.php?p=55490926&postcount=15
Good luck!
it doesnt go download mod or recovery just a black screen and i tried this method
http://forum.xda-developers.com/showthread.php?t=2582142 but in linux it started bootloop. It started a little brighten the screen and complete black again. This procedure continues again again. Little bit brighten and black again again.
And in my device manager and ports . See my phone is seen as Marshall London HS-USB Diagnostics 9006. And bunch of portable devices.
up !
i fixed guys. Thanks for the help anyway. I did a little more research i found out skr method might have success. Tried skr method and it worked.
its the same procedure but in linux my phone keep disconnecting . But on windows it was fine and skr method working on windows. It worked.
Fixed

urgent help lenovo k4 note complete brick

My lenovo k4 note totally dead after installing RR-N-v5.8.5-20180105-k5fpr-Final and Zero and while tried to install TWRP using MarshMallow method my device is dead can't boot , no bootloader ,no recovery ,not even vibrate , and not detecting
can' t connect to pc when
trying to use SP flash tool to recover it,can' detect by flash tool
tried to flash with flash tools ver. 5.1524 but not detecting by pc and shows this error always when try to connect pc with flash tool
please see image : https: // goo . gl / bjndc5
kagadhvi said:
My lenovo k4 note totally dead after installing RR-N-v5.8.5-20180105-k5fpr-Final and Zero and while tried to install TWRP using MarshMallow method my device is dead can't boot , no bootloader ,no recovery ,not even vibrate , and not detecting
can' t connect to pc when
trying to use SP flash tool to recover it,can' detect by flash tool
tried to flash with flash tools ver. 5.1524 but not detecting by pc and shows this error always when try to connect pc with flash tool
please see image : https: // goo . gl / bjndc5
Click to expand...
Click to collapse
My best advice would be to consult to the service center... As far as I know, in your current phone condition, there's nothing that we can do... Even if the service center would cost not little, they would surely know what to do
CandyCone said:
My best advice would be to consult to the service center... As far as I know, in your current phone condition, there's nothing that we can do... Even if the service center would cost not little, they would surely know what to do
Click to expand...
Click to collapse
i did it bro
it took sometime but finally i completed solve k4 note issue
figured out
kagadhvi said:
i did it bro
it took sometime but finally i completed solve k4 note issue
figured out
Click to expand...
Click to collapse
Can you please share the process how to solve dead lenovo k4 note issue? My phone is completely dead, service center people also couldn't do anything, please help me.
gpnth22 said:
Can you please share the process how to solve dead lenovo k4 note issue? My phone is completely dead, service center people also couldn't do anything, please help me.
Click to expand...
Click to collapse
download latest flash tools
download stock rom version marsmallow (you'll find it on foru xda)
than flash it with latest flash tools
done.
kagadhvi said:
download latest flash tools
download stock rom version marsmallow (you'll find it on foru xda)
than flash it with latest flash tools
done.
Click to expand...
Click to collapse
I tried flashing stock rom with SP flash tool but my device is not detecting, all drivers are installed properly tried by pressing volume keys & power button also but still not detecting, please give me a solution.

Hardbricked to Qualcomm USB 9008

Really hoping someone can help me out here. I have a Nexus 6P, Non-BLOD. Yesterday, after clean flashing the latest version of EvoX, while setting some things up, device randomly crashed. No Shut down animation or anything. Just black screen. Tried turning it on via Power Button and then Power And Volume Buttons but nothing works. Connected it to PC and see it's Detected as Qualcomm USB Bulk (9008) in Coms and Ports. Did some research and found out I have to flash via QFIL. And this is where I am stuck. I tried several versions, but it doesn't flash/gives Shara error. I tried reinstalling driver. I also read a guide here. But the Firmware link is dead and it says to flash via MiFlash, something I can't even try since the Link in the OP is dead. I tried some different versions of QFIL but all of them give a Sahara Communication error. Now I'm pretty much at a loss on what to do. I'd really like to fix my 6P. And I would appreciate anyone taking the time to point me in the right direction, or help me fix it. Thanks in Advance.
DarthVader said:
Really hoping someone can help me out here. I have a Nexus 6P, Non-BLOD. Yesterday, after clean flashing the latest version of EvoX, while setting some things up, device randomly crashed. No Shut down animation or anything. Just black screen. Tried turning it on via Power Button and then Power And Volume Buttons but nothing works. Connected it to PC and see it's Detected as Qualcomm USB Bulk (9008) in Coms and Ports. Did some research and found out I have to flash via QFIL. And this is where I am stuck. I tried several versions, but it doesn't flash/gives Shara error. I tried reinstalling driver. I also read a guide here. But the Firmware link is dead and it says to flash via MiFlash, something I can't even try since the Link in the OP is dead. I tried some different versions of QFIL but all of them give a Sahara Communication error. Now I'm pretty much at a loss on what to do. I'd really like to fix my 6P. And I would appreciate anyone taking the time to point me in the right direction, or help me fix it. Thanks in Advance.
Click to expand...
Click to collapse
Same thing happened to me in the same ROM (Weird) .. but i managed to flash the qfil successfully .. but still phone doesnt boot up .. here's what you should do ... try to hard reset the phone until you hear the disconnecting sound from pc . Ready all the necessary flash in the qfil and as soon as u hear the device connected hit the download button .. it will flash without the sahara protocol error . Be quick ! tell me if that fixed ur problem . Peace
hk1271 said:
Same thing happened to me in the same ROM (Weird) .. but i managed to flash the qfil successfully .. but still phone doesnt boot up .. here's what you should do ... try to hard reset the phone until you hear the disconnecting sound from pc . Ready all the necessary flash in the qfil and as soon as u hear the device connected hit the download button .. it will flash without the sahara protocol error . Be quick ! tell me if that fixed ur problem . Peace
Click to expand...
Click to collapse
Thanks. Can you share the files you used please? I can't for the life of me, find the correct download files. There was a Nexus6P_Unbrick by TenFar but all the links are down.
DarthVader said:
Thanks. Can you share the files you used please? I can't for the life of me, find the correct download files. There was a Nexus6P_Unbrick by TenFar but all the links are down.
Click to expand...
Click to collapse
I used another qfil firmware
https://drive.google.com/file/d/1PixuumVVzxBKUsQ88X3AJ21Hsi2mV3Zq/view
Here is the link .. you can find the firehose and all files in the firmare folder . Best of Luck
I have a similar situation where I am unable to power on the phone in any way, and I am only able to communicate with the qualcom USB 9008 driver.
I am following your instructions using the firmware files you provided (thank you!) and I can see an attempt is being made to download the files before sahara error occurs.
I don't think I enabled developer options when my Nexus 6P was working and wondered if sahara error is due to that.
I was wondering if you had previously enabled developer options by tapping on the build number several times, once the operating system booted and if that is a critical step in being able to recover the Nexus 6p from this hard bricked state where I am stuck in EDL 9008 mode, and unable to access bootloader, and volume+power keys do not do anything...I feel like I'm screwed (and already moved on) but using time these days to learn about android devices!
thanks!

Categories

Resources