My Gionee E7 32 GB soft bricked - no idea what to do - GiONEE Elife E7

There are a few threads in the forum about how to unbrick a hard bricked device. But only vague directions how to unbrick a soft bricked device.
My phone can be booted into fastboot mode. It is recognized by the PC but when I use command prompt and write fastboot devices nothing happens. I have installed the driver. Also my phone cannot enter any kind of recovery cause it's bricked. Only the red logo appears and nothing else.
I see there are issues with using fastboot on Gionee E7. Did anyone solve them?
I would be grateful if anyone of the members explain how to unbrick the device or show me a proper article or thread.
Thanks

same problem with me... anyone solve this problem? pls. help

plamanov said:
There are a few threads in the forum about how to unbrick a hard bricked device. But only vague directions how to unbrick a soft bricked device.
My phone can be booted into fastboot mode. It is recognized by the PC but when I use command prompt and write fastboot devices nothing happens. I have installed the driver. Also my phone cannot enter any kind of recovery cause it's bricked. Only the red logo appears and nothing else.
I see there are issues with using fastboot on Gionee E7. Did anyone solve them?
I would be grateful if anyone of the members explain how to unbrick the device or show me a proper article or thread.
Thanks
Click to expand...
Click to collapse
Download the Kitkat update, search google or the forum for it. Rename the update to update.zip then switch off your phone and connect it to your computer. It will open up live a flash drive then copy the file to the phone. Unplug the phone and switch off and then on. It should boot into recovery. In recovery, select the option that says update from sd card. It will show you an explorer view, then look for the update.zip, select it and let it install. Once its done switch of your phone and then on back. It should working now. It may take a while to boot for the first time.

Related

[Q] I Soft bricked my yu yureka,plz help!

Dear sir,
i tried to factory reset my phone and when phone rebooted YU logo shown up but after that nothing happened ,it didn't load up,black screen,shut down again.(SOFT BRICK).
i tried many attempts to install stock recovery using fast boot mode,but in cmd it ends up showing waiting for device.
i think usb debugging was disabled,that's why it is showing waiting for devices,and hence i cannot install stock recovery and reboot my phone. So is there any way to fix "waiting for device" ,is there any way to enable usb debugging even if i cannot start my phone . I need your your help ASAP.
3skanurag said:
Dear sir,
i tried to factory reset my phone and when phone rebooted YU logo shown up but after that nothing happened ,it didn't load up,black screen,shut down again.(SOFT BRICK).
i tried many attempts to install stock recovery using fast boot mode,but in cmd it ends up showing waiting for device.
i think usb debugging was disabled,that's why it is showing waiting for devices,and hence i cannot install stock recovery and reboot my phone. So is there any way to fix "waiting for device" ,is there any way to enable usb debugging even if i cannot start my phone . I need your your help ASAP.
Click to expand...
Click to collapse
yes it is soft brick. i face same problem. but make sure your pc has successfuly installed adb drivers.
if drivers are not working so you will see waiting for device.
It is fixed now i used pdanet+ then adb then flashed cm recovery then removed battery and plugged in and then it started.
3skanurag said:
It is fixed now i used pdanet+ then adb then flashed cm recovery then removed battery and plugged in and then it started.
Click to expand...
Click to collapse
i have solution for soft brick. download fast boot stock images and follow procedure.
Link for fastboot rom
Link for tool and guide in this link you will see procedure also just scroll down in this page
ashish_zarekar said:
i have solution for soft brick. download fast boot stock images and follow procedure.
Link for fastboot rom
Link for tool and guide in this link you will see procedure also just scroll down in this page
Click to expand...
Click to collapse
i tried the method you mentioned following this guide
http://www.thetechnotriad.com/326/ho...oot-yu-yureka/
the phone is working good the only major problem whatsapp is not opening...when clicked opens for 0.01 sec and returns back to previous screen (flashes) ....please somebody help me with this. Thanks in Advance.

Lenovo a6000 doesnt boot .Nothing shows up .HELP PLEASE!!!

My Phone doesnt boot .not even in recovery mode.help me pleasee
there was an option of installing the os in the twrp recovery mode but i didnt do it. i thought of switching off. now it doesnt even turn on.not even in recovery mode.what shoulld i do???. HELP
i tried opening it in adb but it shows "waiting for devices".
Plug it in your pc it should ve found as qualcom something device.Then you can unbrick it by some of the tutorials on web.With qualcom flasher or something like that
ikevin96x said:
My Phone doesnt boot .not even in recovery mode.help me pleasee
there was an option of installing the os in the twrp recovery mode but i didnt do it. i thought of switching off. now it doesnt even turn on.not even in recovery mode.what shoulld i do???. HELP
i tried opening it in adb but it shows "waiting for devices".
Click to expand...
Click to collapse
Always first do a complete search on xda, because there's always someone else who had the same problem earlier. This question has been asked a gazillion times. Thats not too big a problem. If you follow correctly, you'll be able to unbrick it in no time. Follow this tutorial and first try the third method. If that doesn't work then try the second one.
ikevin96x said:
My Phone doesnt boot .not even in recovery mode.help me pleasee
there was an option of installing the os in the twrp recovery mode but i didnt do it. i thought of switching off. now it doesnt even turn on.not even in recovery mode.what shoulld i do???. HELP
i tried opening it in adb but it shows "waiting for devices".
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=Aejq4DW4XOA
follow this tutorial, dont worry itll fix up its not a big issue - happened with me too
you might try this tutorial
my phone once was brick like that, but it solved after tried that tutorial.
hope it worked with you as well.
good luck

My Yureka is hardbricked.

as i was having a bootloop problem when i tried to root my Yureka which was on Lollipop.
So searched for a softbrick fix guide and I used the yureka fastboot tools with cm11 stock by allflash.bat.
the procedure finished and the cmd window closed but when i pressed the power button it won't start.
when i connect it to the PC it won't recognize.
I think I have hardbricked my phone because i flashed a 32bit over a 64bit.
can anyone help me please?
some guide as to revive my phone?
Also my phone is not in the warranty period anymore.
I'll really appreciate if someone gives me a fix for this.
You shouldn't have used a batch file like allflash.bat - Did you notice any errors/issues while flashing the ROM ?
Follow this blog step by step - http ://webtrickz.com/how-to-downgrade-yureka-from-cm12-lollipop-to-cm11-kitkat
All should be good. Best of Luck.
dalvi.nishant9 said:
as i was having a bootloop problem when i tried to root my Yureka which was on Lollipop.
So searched for a softbrick fix guide and I used the yureka fastboot tools with cm11 stock by allflash.bat.
the procedure finished and the cmd window closed but when i pressed the power button it won't start.
when i connect it to the PC it won't recognize.
I think I have hardbricked my phone because i flashed a 32bit over a 64bit.
can anyone help me please?
some guide as to revive my phone?
Also my phone is not in the warranty period anymore.
I'll really appreciate if someone gives me a fix for this.
Click to expand...
Click to collapse
http://forum.xda-developers.com/yureka/help/recover-yu-yureka-softbricks-hardbricks-t3477139

Phone Bricked. PLEASE HELP

I will try to explain everything from the beginning. I was about to install a custom rom install (it was in 7.1.1 stock, unlocked bootloader) so when I was going to do full wipe with lastest TWRP there was an error. Wait for about 15 minutes just in case, but nothing happened so I decided to restart it to try again. But the phone stuck in the ZTE logo and if it tried to enter TWRP was stuck in the logo too, I tried with all versions of TWRP and no one works. Find a post that said I could use TWRP tenfars tool to recover my phone and had to enter the EDL mode. I managed to put the phone in edl mode but now I can not get out of it. I press and hold the power button for a minute and nothing happens (no vibration, no led, no ZTE logo) my pc just does the unplug windows sound. My pc recognizes the phone as QUSB_BULK. When I try to use the tenfars tool I get this message:
C:\Users\Alejandro Saavedra\Downloads\minimal_adb_fastboot_1.4.1_portable>axon7tool -w recovery
Connecting to device...
S: failed to read command
S: Failed to receive hello
terminate called after throwing an instance of 'std::runtime_error'
what(): error: Unknown error
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Also try using the xiaomi MiFlash tool (even change the drivers from QUSB_BULK to COM COM 5) but something similar happens, also tells me can not recive hello package.
I'm a little new to this so I beg you a little patience
Please work very hard to buy this phone, there has to be some way to unbrick it. :crying:
If you need any additional information just tell me
If you use axon7tool :
check in Devices Manager if is called QLIBSD.
rename recovery.img to recovery.bin.
If you use MiFlash :
get latest version : https://www.androidfilehost.com/?fid=673368273298954241
check in Devices Manager if is called Qualcomm 8004.
CelesteBlue said:
check in Devices Manager if is called QLIBSD.
rename recovery.img to recovery.bin.
Click to expand...
Click to collapse
You need two files, recovery.img and recovery.bin in same folder. (Don't forget to unzip tenfars TWRP and after that rename and make a copy)
Please read: https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379
Best regards
Smedslund
Smedslund said:
You need two files, recovery.img and recovery.bin in same folder. (Don't forget to unzip tenfars TWRP and after that rename and make a copy)
Please read: https://forum.xda-developers.com/axon-7/how-to/guide-install-twrp-unlock-bl-flash-t3517379
Best regards
Smedslund
Click to expand...
Click to collapse
anyway :
https://ab-exclusive.us/fileserver/uploads/twrp_rec_tenfar.zip
404 Not Found...
To flash a recovery file (STOCK or TWRP) with axon7tool, the file has to be called recovery.bin.
CelesteBlue said:
anyway :
https://ab-exclusive.us/fileserver/uploads/twrp_rec_tenfar.zip
404 Not Found...
To flash a recovery file (STOCK or TWRP) with axon7tool, the file has to be called recovery.bin.
Click to expand...
Click to collapse
You will find tenfar 3.0.2-2 TWRP at download center:
https://forum.xda-developers.com/axon-7/how-to/download-center-factory-images-ota-t3606547
Once unzipped, copy it to recovery.bin:
copy twrp_rec_tenfar.img recovery.bin
Thanks to everyone for your answers, I was able to recover my phone using miflash, qualcom usb drivers and this ROM https://build.nethunter.com/misc/axon7/A2017U_B15-NEW_FULL_EDL.zip I put my phone in EDL mode and then flash the mentioned rom. It took me like 20-30 tries to finally get it. The last attempt I made was to unplug the device from the computer, I kept the power button for 10 seconds and connect it to the computer without ever releasing the power button. It was seen as always (black screen, not led) but for some reason this time works. I hope everyone can solve this problem. Can pm me if you need help, maybe i can help with something
ale0796 said:
Thanks to everyone for your answers, I was able to recover my phone using miflash, qualcom usb drivers and this ROM https://build.nethunter.com/misc/axon7/A2017U_B15-NEW_FULL_EDL.zip I put my phone in EDL mode and then flash the mentioned rom. It took me like 20-30 tries to finally get it. The last attempt I made was to unplug the device from the computer, I kept the power button for 10 seconds and connect it to the computer without ever releasing the power button. It was seen as always (black screen, not led) but for some reason this time works. I hope everyone can solve this problem. Can pm me if you need help, maybe i can help with something
Click to expand...
Click to collapse
That's because you reset the EDL that way. the method is weird but seemed to work...
If you hold the 3 buttons for ~10 secs while the device is in EDL it will reset it
@Choose an username... I am out of context, but I wonder if I can remove the ugly message on each startup telling it can't check if the device is not corrupted... I think this message is caused by the unlocked bootloader. A solution ? Thank you.
CelesteBlue said:
@Choose an username... I am out of context, but I wonder if I can remove the ugly message on each startup telling it can't check if the device is not corrupted... I think this message is caused by the unlocked bootloader. A solution ? Thank you.
Click to expand...
Click to collapse
Actually, it is a nice feature for the few seconds it lasts, but read HERE if you must. Be careful!
Good luck
CelesteBlue said:
@Choose an username... I am out of context, but I wonder if I can remove the ugly message on each startup telling it can't check if the device is not corrupted... I think this message is caused by the unlocked bootloader. A solution ? Thank you.
Click to expand...
Click to collapse
I'd advice against doing it... I had no trouble with it but a bunch of people now have paperweights. But yeah, the link is the one provided by the other guy above me
Thank you so much @Choose an username... and @amphi66 : that worked !
Anyway I am on G B04 (Nougat).
Do you know some cool mods I should do ?
Like debloat, remove the boot message (done), etc...

MI 9T Brick, need help for EDL steps

Hello guys, how are you today ?
I will do my best to write properly (french, sad)
So, i unlocked my phone with no problem. I tried to install a working TWRP. The ADB command to install was easy, but impossible to boot in twrp with the boot command on ADB.
I understood that i just needed to press up and power to open TWRP.
I putted on my OTG USB KEY the xiaomi.eu weekly ROM for my phone.
I formated only DATA, and i began the installation.
I had an error, and after my OTG was not recognize.
I just putted up and power to reboot the phone and try again.
But i dont know what happened, black screen, impossible to boot on something, i tryed to hold power 15 sec and nothing work, impossible to go to fastboot mode.
The phone is recognized on windows but nothing more.
I searched on the net and my phone is bricked. I need to open it to press ELD.
I found someone who has ELD permission for 12$.
Now i just want to know if someone can explain me how to open without damage the phone and how to be in ELD mode.
Thanks you and have a nice day.
I guess you could try to buy an EDL cable instead.
How you see phone in device manager?
newhope81 said:
Hello guys, how are you today ?
I will do my best to write properly (french, sad)
So, i unlocked my phone with no problem. I tried to install a working TWRP. The ADB command to install was easy, but impossible to boot in twrp with the boot command on ADB.
I understood that i just needed to press up and power to open TWRP.
I putted on my OTG USB KEY the xiaomi.eu weekly ROM for my phone.
I formated only DATA, and i began the installation.
I had an error, and after my OTG was not recognize.
I just putted up and power to reboot the phone and try again.
But i dont know what happened, black screen, impossible to boot on something, i tryed to hold power 15 sec and nothing work, impossible to go to fastboot mode.
The phone is recognized on windows but nothing more.
I searched on the net and my phone is bricked. I need to open it to press ELD.
I found someone who has ELD permission for 12$.
Now i just want to know if someone can explain me how to open without damage the phone and how to be in ELD mode.
Thanks you and have a nice day.
Click to expand...
Click to collapse
Can you get into fastboot
My phone was completely stuck in black screen impossible to go on fastboot mode.
Luckely, i dont know how but my phone was recognized like if i was in EDL mode.
I contacted an asian man on WhatsApp, he putted his logs on miflash to allowed EDL flash.
My phone is Alive now!
Where Can i buy an EDL cable if i need it ? It replace the open of the phone?

Categories

Resources