Related
My FP scanner stopped working recently...figured it was software related so i went ahead and wiped the stats..restarted, installed new custom rom...no cigar.
I have dropped my phone in water so im assuming its water damage.
Anyone got any ideas where i can get a replacement and get it fixed?
Thanks!
Same here, I can't find a solution at all. Flashing new roms dont fix it neither does wiping data
Sent from my MB860 using XDA App
jackdonogy said:
My FP scanner stopped working recently...figured it was software related so i went ahead and wiped the stats..restarted, installed new custom rom...no cigar.
I have dropped my phone in water so im assuming its water damage.
Anyone got any ideas where i can get a replacement and get it fixed?
Thanks!
Click to expand...
Click to collapse
If water has affected the hardware, i doubt that you can ever fix this problem( if i were you, i would dismantle the phone and try and clean-and completely dry any water off it- the FP scanner and see if it works....but i would not advise you to do such a thing if you are not comfortable with it).
If, however it's a software issue, Flashing a new ROM would have fixed this problem.
The good news here though is that you can use the traditional lock, which many Atrix users prefer over the FP scanner.
another option is too look for a bricked phone or one with a cracked screen for parts to replace the FP scanner.
funny thing about water damage....i dropped it in may...literally 3 months ago..and now its causing an issue...guess i have to live with no FP scanner..
cellulardr.com
Just got a replacement from them for about $30 with the back as well for good measure. Friend from the US shipped it up here to save.
my old one actually does work haven't determined why my sensor gives me issues (off balance so it records swipes that aren't happening - not sure what the cause is cause it just goes away after some adjustment). the point being you are in toronto so you can have mine for $10 and i would install it as well.
y2whisper said:
cellulardr.com
Just got a replacement from them for about $30 with the back as well for good measure. Friend from the US shipped it up here to save.
my old one actually does work haven't determined why my sensor gives me issues (off balance so it records swipes that aren't happening - not sure what the cause is cause it just goes away after some adjustment). the point being you are in toronto so you can have mine for $10 and i would install it as well.
Click to expand...
Click to collapse
so i need these two things:
http://www.cellulardr.com/proddetail.php?prod=01006796003
http://www.cellulardr.com/proddetail.php?prod=01006645001
How easy was it to replace the FP scanner?
y2whisper said:
cellulardr.com
Just got a replacement from them for about $30 with the back as well for good measure. Friend from the US shipped it up here to save.
my old one actually does work haven't determined why my sensor gives me issues (off balance so it records swipes that aren't happening - not sure what the cause is cause it just goes away after some adjustment). the point being you are in toronto so you can have mine for $10 and i would install it as well.
Click to expand...
Click to collapse
Great! Let's meet up. I've pm'ed u. Hit me back. Thanks!
Sent from my MB860 using XDA Premium App
andy2na said:
so i need these two things:
http://www.cellulardr.com/proddetail.php?prod=01006796003
http://www.cellulardr.com/proddetail.php?prod=01006645001
How easy was it to replace the FP scanner?
Click to expand...
Click to collapse
you might not need both, but to be safe spend the extra $5. I haven't used the one I bought since it appears to be working fine.
This phone is very easy to torn apart.
yeah its actually one of the easiest out there
http://www.ifixit.com/Teardown/Motorola-Atrix-4G-Teardown/4964/1
you won't have to go beyond step 6 for this repair.
There is an onlilne outfit that supplies replacement parts for the Atrix, but doing so is not for the faint of heart.. The site is located at www.repairsuniverse.com
I considered going through them to replace my glass when it lost a battle with gravity and a concrete slab, and noticed at the time, they have just about any part that you could need, including the board that contains the FP scanner.
y2whisper said:
you might not need both, but to be safe spend the extra $5. I haven't used the one I bought since it appears to be working fine.
Click to expand...
Click to collapse
The sticker like cover of my scanner is peeling away. Is this the same as the cover that they have for sale?
you mean the black put your finger against? the cover is actually underneath that.
borgib said:
The sticker like cover of my scanner is peeling away. Is this the same as the cover that they have for sale?
Click to expand...
Click to collapse
y2whisper said:
you mean the black put your finger against? the cover is actually underneath that.
Click to expand...
Click to collapse
I bought it before I saw your post. You are right. The cover actually rests underneath the FP scanner itself.
In stead of buying the entire scanner, what I did was super glue the sticker back down. It's not exactly pretty, but the scanner still works flawlessly.
I am using my GS4 running armband with my G2, it fits well actually but there is one MAJOR issue. The phone will NOT wakeup when double tapping the screen. It will however turn off when double tapping the status bar. Has anyone else gone running with their G2? If so how has it worked out and what armband are you using?
Be sure the proximity sensor isnt covered, if this is covered it doesnt listen, probably to prevent from turning on in your pocket.
wargreymon89 said:
Be sure the proximity sensor isnt covered, if this is covered it doesnt listen, probably to prevent from turning on in your pocket.
Click to expand...
Click to collapse
Yep...sounds like the culprit.
Sent from my Nexus 7 using Tapatalk 2
The ar band I am using doesnt cover it, I wonder if maybe its too thick and is possibly messing with the sensor?
KnockOn is also affected by the orientation of the phone. If it doesn't detect that it is in an appropriate orientation for typical phone use it will ignore the KnockOn feature.
Sent from my LG-D800 using xda app-developers app
zxrax said:
KnockOn is also affected by the orientation of the phone. If it doesn't detect that it is in an appropriate orientation for typical phone use it will ignore the KnockOn feature.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
I have tested that, it turns on at all angles and even upside down. I don't think that is very accurate, even if LG advertises that. I am guessing my arm band is too thick.
TechSilver13 said:
I have tested that, it turns on at all angles and even upside down. I don't think that is very accurate, even if LG advertises that. I am guessing my arm band is too thick.
Click to expand...
Click to collapse
Anything touching the screen prolly jacks with it as well!
TechSilver13 said:
I have tested that, it turns on at all angles and even upside down. I don't think that is very accurate, even if LG advertises that. I am guessing my arm band is too thick.
Click to expand...
Click to collapse
Just got my international version yesterday and was really bummed to discover the same issue this morning.
It definitely has sonething to do with the proximity/light sensor next to the LED getting thrown off my the plastic of the armband view area.
I experimented by pressing the plastic flat against the phone and it then worked. Obviously not practical to try and do while running, but its a start. I imagine that, while not ideal, cutting a section from the armband window may help
Will post if I find something else
So, after about a month the charging port on my car dock broke out of the dock, making it pretty much useless. I figured I'm going to try to just find a cheap dock somewhere else that I can use and can just plug a normal charger into the phone. The one thing that the official car dock does, which isn't done on cheap universal docks was that it had a magnet which would trigger car mode in the phone. After a bit of searching, I finally found the spot using a small magnet that I found at work. What is most interesting about the magnetic trigger is that based on the polarity of the magnet, it can activate either the car dock or the desktop dock. Right now I've just got one magnet, and I don't know the polarity on it, but it works. I have uploaded a picture with a small piece of tape on the spot where the trigger is. I'm not sure how strong the magnet needs to be, but it may need to be a bit stronger than the average refrigerator magnet. I'm probably going to go buy a few and some super glue and see what I can do as far as a homemade dock.
Good find
Sent from my XT1058 using Tapatalk
Also seems to he a magnet at the upper right hand side too, many times I have pulled my moto out of my pocket with a dime stuck to the back side
Sent on my Moto X
flashallthetime said:
Also seems to he a magnet at the upper right hand side too, many times I have pulled my moto out of my pocket with a dime stuck to the back side
Sent on my Moto X
Click to expand...
Click to collapse
That's the speaker, they've got strong magnets in them.
Sent from my XT1058 using Tapatalk
linuxgator said:
That's the speaker, they've got strong magnets in them.
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
Lol
Sent on my Moto X
flashallthetime said:
Also seems to he a magnet at the upper right hand side too, many times I have pulled my moto out of my pocket with a dime stuck to the back side
Sent on my Moto X
Click to expand...
Click to collapse
US coins are not magnetic...there's no iron in them.
kjl512 said:
US coins are not magnetic...there's no iron in them.
Click to expand...
Click to collapse
Well they are in Canada (I think). And there is a Richmond Hill in Canada.
EDIT: And @flashallthetime is from Canada.
Speaking of car mode, anyone able to activate car/dock mode simply by touching their Moto X in a certain way? Sometimes I'll pick it up or simply shift/change hands and some type of mode is somehow activated where the screen darkens and displays a clock. It happens somewhat infrequently and I'm never able to replicate it... I don't even own a car or desk dock, let alone put it in one... it always happens by hand and always accident.
fury683 said:
Well they are in Canada (I think). And there is a Richmond Hill in Canada.
EDIT: And @flashallthetime is from Canada.
Click to expand...
Click to collapse
Lol, not only do we have iron in our coins, our paper money is no longer made of paper but plastic, just lost a C note(100) today, stupid money is slippery as hell
Sent on my Moto X
flashallthetime said:
Lol, not only do we have iron in our coins, our paper money is no longer made of paper but plastic, just lost a C note(100) today, stupid money is slippery as hell
Sent on my Moto X
Click to expand...
Click to collapse
That's funny....I'm from Canada....and found a new $100 Bill today.
Sent from my Moto X cell phone telephone.....
I have a moto skip and can easily put the phone into car or desk mode with it.. If you line the end of the skip up with the sim card tray and put the small magnet just past the edge of the phone, smooth side activates desk mode, suede side turns on auto version.
Looks like this can be done with any magnet. Just tried with a random one I had laying around and it enabled car mode.
Sent from my XT1053 using xda app-developers app
Doesn't Moto Assist automatically switch to car mode when it detects that you are in a moving vehicle?
Sent from my XT1053 using Tapatalk
cannondale0815 said:
Doesn't Moto Assist automatically switch to car mode when it detects that you are in a moving vehicle?
Sent from my XT1053 using Tapatalk
Click to expand...
Click to collapse
I don't think it does. Assist will announce incoming calls and texts, but that's not the same as car mode. I don't see any real benefit to car mode any longer since android no longer changes the behavior of the home button when in car mode.
For me, I don't see the benefit of desk mode either, since Motorola insists on ignoring the orientation sensors and displaying the clock in portrait mode regardless of the device orientation. I had the opposite problem with my Bionic - in the car dock it would only display in landscape orientation, even if the phone itself was in a portrait orientation.
Sent from my Nexus 7 using Tapatalk
Doesn't car mode keep the screen on?
Sent from my XT1058 using Tapatalk
murso74 said:
Doesn't car mode keep the screen on?
Sent from my XT1058 using Tapatalk
Click to expand...
Click to collapse
Yes, it does.
Car Mode can also auto-launch a Car Home application (such as Car Home Ultra); unfortunately, as mentioned, Android will not relinquish control of the home button to a Car Home Launcher, which limits the usefulness of such a UI.
I am really excited to learn about these magnet sensors. That's really cool. I hope that Motorola creates their own docks. And if they don't, I certainly will create my own.
Thanks for the information.:good:
Put a Neo button magnet on the back of my Slip grip car mount and it works great. Now I have an NFC tag stuck to the mount for unlocking the phone and the magnet turns car mode on. I also found the old OG Moto Droid car mode apk and I'm using that instead of Car home Ultra...I like the simplicity of the old car mode.
I bought some 1/8" by 1/16" Warhammer magnets on eBay and cannot for the life of me get Car Mode to activate. Anyone have any issues or know what I might be missing?
Wish we could set something up to allow us to launch a certain app when moto assist activates the driving mode. Silly, you can launch a music app but no app of choice. That would allow us to eliminate the magnet all together.
gsk3rd said:
Wish we could set something up to allow us to launch a certain app when moto assist activates the driving mode. Silly, you can launch a music app but no app of choice. That would allow us to eliminate the magnet all together.
Click to expand...
Click to collapse
I have thought of a way, at least for me and how I use it, as a workaround that hasn't been tested, but should work fine.
With Tasker, I was going to setup a profile that 2 things have to happen to trigger it. One, phone is plugged into car charger. Two, headset is plugged in (my aux input on my car). Once these 2 things have happened together, not just separately, I will trigger Car Mode to activate, which will then run Car Home Ultra. I think this will work out great for me with how I use it.
I bought the official flip case. It has a magnet in the front. Unfortunately Moto have used a rather powerful neodinium magnet. So, your phones magnetometer will follow the edge of the case around rather than true north!!!! This doesn't matter for gps navigation, but for on foot travel, and any augmented reality apps that use the compass this case will make the behave oddly.
I don't know what the long term effect on the phones compass will be, but I don't expect it to be good.
In addition, but for me I think it is a small risk, this magnet will be capable of damaging some computer storage mediums and possibly, wiping swipe card data...
I have no idea why they chose to use such an aggressive magnet. I can hang the phone from a metal bar with it, no problem.
Just thought I would share....
helppme said:
I bought the official flip case. It has a magnet in the front. Unfortunately Moto have used a rather powerful neodinium magnet. So, your phones magnetometer will follow the edge of the case around rather than true north!!!! This doesn't matter for gps navigation, but for on foot travel, and any augmented reality apps that use the compass this case will make the behave oddly.
I don't know what the long term effect on the phones compass will be, but I don't expect it to be good.
In addition, but for me I think it is a small risk, this magnet will be capable of damaging some computer storage mediums and possibly, wiping swipe card data...
I have no idea why they chose to use such an aggressive magnet. I can hang the phone from a metal bar with it, no problem.
Just thought I would share....
Click to expand...
Click to collapse
Good to know, i had my worries about this as well. Putting a magnet over the phone 24/7 didn't seem like a good idea
jaramigo said:
Good to know, i had my worries about this as well. Putting a magnet over the phone 24/7 didn't seem like a good idea
Click to expand...
Click to collapse
its great for storing your phone on the fridge door though.. wtf were Motorola and google thinking. I think I'm going to complain and see what they say
helppme said:
its great for storing your phone on the fridge door though.. wtf were Motorola and google thinking. I think I'm going to complain and see what they say
Click to expand...
Click to collapse
Yes sir, you should that. It is ridiculous to make such design mistake on an official case. I was about to buy one but after reading your story I am not sure anymore. Keep us posted.
Btw; you can contact Motorola via their official app Moto Care.
Glad to know, that I am not the only one who is concerned about that magnet. By the way there are two magnets. A weak one to trigger the screen on/off and a strong magnet to keep the case closed.
After removing the strong magnet you will be able to use the compass with the cover flipped to the backside.
https://www.youtube.com/watch?v=zYiSdys0zYg&feature=youtube_gdata_player
Edit: The strong magnet was on the lower third, where the cut is visible.
Gesendet von meinem XT1032 mit Tapatalk
TIL that official Moto accessory screws up Moto phone. But look at the good side: you can now keep it on your fridge door!
JoeSchmoe007 said:
TIL that official Moto accessory screws up Moto phone. But look at the good side: you can now keep it on your fridge door!
Click to expand...
Click to collapse
spoke to moto care. sent them screen shots of the magnetometer all messed up. They said they will get back to me, but no one else has reported issues... *cough* bull**** *cough...
I have noticed today that even when I remove the case, the magnetic sensor is all messed up. It seems after a week of use it has screwed up the sensors calibration (probably correctable)..
evidently, part of the cheap price is a lack of proper beta testing of the phone and accessories....
I have ordered one from amazon. Now I will sent it back. I have my concerns too so I wont even try it.
Sent from my XT1032 using xda app-developers app
helppme said:
It seems after a week of use it has screwed up the sensors calibration (probably correctable)..
Click to expand...
Click to collapse
With GPS Status from Play Store you can force recalibration.
.
I can also confirm this. I have a white flip case but stopped using it after a week as it got in the way. I just put it back on and sure enough my compass was exhibiting the same issue. How did they miss this?
Sent from my XT1032 using XDA Premium 4 mobile app
Recalibrating the compass with the GPS toolbox app seemed to have fix this issue for me
Sent from my XT1034 using Tapatalk
rec71 said:
I can also confirm this. I have a white flip case but stopped using it after a week as it got in the way. I just put it back on and sure enough my compass was exhibiting the same issue. How did they miss this?
Sent from my XT1032 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
there is a small metal square on the inside of the flip cases backcase. I 'think' this is intended to shield the sensor from the magnet when the case is open. It clearly is TOTALLY inadequate to the task. I'm speculating this is what the metal square is for, as it corresponds in position exactly with one of the magnets in the case door, and this metal square is not present on the normal back case..
Simply lazy design and testing... why does it even need a magnet to stay closed :/ its like closing a book with a magnet lol, they get along fine without them!!!!
helppme said:
spoke to moto care. sent them screen shots of the magnetometer all messed up. They said they will get back to me, but no one else has reported issues... *cough* bull**** *cough...
I have noticed today that even when I remove the case, the magnetic sensor is all messed up. It seems after a week of use it has screwed up the sensors calibration (probably correctable)..
evidently, part of the cheap price is a lack of proper beta testing of the phone and accessories....
Click to expand...
Click to collapse
Any update from moto care?
eddiem74 said:
Any update from moto care?
Click to expand...
Click to collapse
still waiting. Sent them a chaser..ill update
Thank you for contacting Motorola.
We regret that there is no possible solution. Compasses operate by magnetic field, and any interference with any compass magnet. There is no way around this.
If you are using a Motorola original case, rest assured that will not hurt your terminal. Imam to close the lid affects the compass but not strong enough to damage the terminal or delete any internal memory power. We apologize for the inconvenience.
jlmcr87 said:
Thank you for contacting Motorola.
We regret that there is no possible solution. Compasses operate by magnetic field, and any interference with any compass magnet. There is no way around this.
If you are using a Motorola original case, rest assured that will not hurt your terminal. Imam to close the lid affects the compass but not strong enough to damage the terminal or delete any internal memory power. We apologize for the inconvenience.
Click to expand...
Click to collapse
I don't understand, are you saying you work for motorola? was this a response you got from motorola??
Motorola cannot release an OFFICIAL ACCESSORY!! at a premium price (£20) that causes issues for the core functionality of the device. I will press the issue with motorola until they acknowledge their mistake and resolve to provide me with a refund, equivalent compensation or a replacement back cover that doesn't cause these problems.
Imagine if you bought a New car; You bought official seat covers for your car that the manufacturer heavily marketed to you, but they make the satnav useless. Do you think any car manufacturer would ever get away with this??
helppme said:
I don't understand, are you saying you work for motorola? was this a response you got from motorola??
Motorola cannot release an OFFICIAL ACCESSORY!! at a premium price (£20) that causes issues for the core functionality of the device. I will press the issue with motorola until they acknowledge their mistake and resolve to provide me with a refund, equivalent compensation or a replacement back cover that doesn't cause these problems.
Imagine if you bought a New car; You bought official seat covers for your car that the manufacturer heavily marketed to you, but they make the satnav useless. Do you think any car manufacturer would ever get away with this??
Click to expand...
Click to collapse
This is the response from Motorola.
helppme said:
....
Motorola cannot release an OFFICIAL ACCESSORY!! at a premium price (£20) that causes issues for the core functionality of the device. I will press the issue with motorola until they acknowledge their mistake and resolve to provide me with a refund, equivalent compensation or a replacement back cover that doesn't cause these problems.
Imagine if you bought a New car; You bought official seat covers for your car that the manufacturer heavily marketed to you, but they make the satnav useless. Do you think any car manufacturer would ever get away with this??
Click to expand...
Click to collapse
As long as the flip shell is folded completely over (so it is flush with the back) my wife's compass works flawlessly. It's actually better than my n4. As I only have one sample to go off of I'm not saying this issue is being over hyped but it isn't always an issue
ryan92084 said:
As long as the flip shell is folded completely over (so it is flush with the back) my wife's compass works flawlessly. It's actually better than my n4. As I only have one sample to go off of I'm not saying this issue is being over hyped but it isn't always an issue
Click to expand...
Click to collapse
I've tried it this way. If you fold it completely flat, and line it up to the millemeter, the compass works about 50% well. It generally adjusts to north, but it flicks back and forth between north and where the magnet is on the case. You can also see the gauss meter jumping around a lot.
I suspect the magnetic power of the magnets in the case vary a large amount they wont be very expensive ones after all..
Hey fellow enthusiasts, I just realised that whenever I tapped on my phone, for example when I tap on the back of my phone, it kinda vibrates. anyone facing this issue?
justinfabregasss said:
Hey fellow enthusiasts, I just realised that whenever I tapped on my phone, for example when I tap on the back of my phone, it kinda vibrates. anyone facing this issue?
Click to expand...
Click to collapse
There is a haptic feed back when you press softkeys. you might be pushing them.
Sent from Galaxy Note 3 SM-N9005
When you mean vibration. Do you mean in your pocket? If you get the vibration/boom feeling then that the vibrating motor. Hope this helps.
Sent from my GT-S5830 using Tapatalk 2
hey guys, its not the haptic feedback. its like it somehow 'vibrates' when I tapped it on the back of my phone.
It hasn't occured to you that it might be something to do with this at all?
B3311 said:
It hasn't occured to you that it might be something to do with this at all?
Click to expand...
Click to collapse
it happened before this.
justinfabregasss said:
it happened before this.
Click to expand...
Click to collapse
Would have been helpful to say so..
For the record, and to stay on topic, no, mine doesn't.
B3311 said:
Would have been helpful to say so..
For the record, and to stay on topic, no, mine doesn't.
Click to expand...
Click to collapse
it doesn't really vibrate but it kinda feels like its moving when tapped with your nails.
Yeah I have the same feeling, like its on "haptic Vibro" but thats not enabled, yet still feels like a slighter Vibrate when hitting some keys?
I think I know what he means...
Its not a feedback from the vibrator at all -- I sometimes tap on my Note when I'm listening to music, like I'm playing a drum solo with my fingers
There is a faint vibration when I do that.
I always assumed it was just one of the sensors vibrating in response to my enthusiastic taps. Who knows, the shock sensor, the vibrator itself?
Anyway, I don't think its anything wrong or broken.
I don't think there is a problem... it happened with my note 2, but always worked well and flawlessly
I get it occasionally and gave up with it.
Sent from my SM-P600 using Tapatalk
See, I told you, your main board is coming apart.
Sent from my N9005
It shows missed call alert
Sent from my SM-N900 using xda app-developers app
I saw a thread on here that might help. It basically said that the camera module "vibrates" slightly when tapped. It's normal, apparently.
Sent from my SM-N9005 using xda app-developers app
The back of phone not the back button right I had this before but it was only happen for few days when I touch the phone it will vibrate so weird but I restore to factor and all problem gone
Sent from my SM-N900A using Tapatalk
I get this when I pick up my phone.but I think it's reminder for unread texted messages.
At least four me that's the only time it buzzed.
Sent from my SAMSUNG-SM-N900A using XDA Premium 4 mobile app
Hi!
A lady friend of mine has this problem on a GSIII.
She broke her screen and since i had a GSIII with dead mainboard i moved her mainboard to the other phone. Main camera & all.
The phone now works perfectly but has accuired the "vibrate when tapping" issue.
Personally i´d say that the vibrating camera module is a solid bet. Production tolerances might be a little on the loose side in the new camera/screenframe combo and there is a short unsupported flex cable from main board to camera module.
If i understand this particular issue correctly you dropped your phone a while back. This just might have knocked the camera module a bit around so it now sits a smidgeon more loosely in the camera bay.
If it really bothers you, a solution could be to disassemble your phone and try thightening the tolerances in the camera mount by adding small pieces of e.g. sticky tape on sides or bottom. If nothing else you´d be able to confirm or discard the camera module as the "culprit".
Personally though i wouldn´t worry about it, as long as everything hums along nicely with this particular handset.
Regards
Elo
Polar67 said:
Hi!
A lady friend of mine has this problem on a GSIII.
She broke her screen and since i had a GSIII with dead mainboard i moved her mainboard to the other phone. Main camera & all.
The phone now works perfectly but has accuired the "vibrate when tapping" issue.
Personally i´d say that the vibrating camera module is a solid bet. Production tolerances might be a little on the loose side in the new camera/screenframe combo and there is a short unsupported flex cable from main board to camera module.
If i understand this particular issue correctly you dropped your phone a while back. This just might have knocked the camera module a bit around so it now sits a smidgeon more loosely in the camera bay.
If it really bothers you, a solution could be to disassemble your phone and try thightening the tolerances in the camera mount by adding small pieces of e.g. sticky tape on sides or bottom. If nothing else you´d be able to confirm or discard the camera module as the "culprit".
Personally though i wouldn´t worry about it, as long as everything hums along nicely with this particular handset.
Regards
Elo
Click to expand...
Click to collapse
hello! thanks for your long reply, this happened before I dropped my device, so I reckon it isn't because of the drop! it works flawlessly, but do you think I should take it over to Samsung? or is it not an issue?
justinfabregasss said:
hello! thanks for your long reply, this happened before I dropped my device, so I reckon it isn't because of the drop! it works flawlessly, but do you think I should take it over to Samsung? or is it not an issue?
Click to expand...
Click to collapse
About the drop - oh yeah, you stated that earlier, my bad.
I´d leave it alone.
If the phone is still under warranty you could try taking it to a service center but then you´ll have to demonstrate there is an issue.
As everything works as it should that might be easier said than done.
Regards
Elo