Hello-
I usually do not open threads but I need advice on this recent touch responsiveness issue that has been happening. My Nexus 7 8 GIG was running great I had not had one issue with it, until one day I opened the case "Poetic leather case with magnet locks" and the screen came on notifications were on and animated everything looked fine. I went to unlock it and the touch screen did not respond to anything, now the screen rotates fine and all but it would not respond to touch. So I reset it with the power button, the touch screen then works until it times out and turns off, I wake it up and the screen does not respond again. I took it out of the case and have manually turned it on/off and it still does not respond to touch, but it will work every time I reset it. This problem has came out of nowhere it was running great.
I was originally on AOKP Milestone 1 with Franko's Kernel r25 so I thought maybe that was it so I re flashed Milestone 1 and kept the stock kernel and the problem persists. So I wiped everything and put BAMF Paradigm on it and it still does this, but the touch screen responds every time it is manually reset so I am trying to figure out if this is hardware or software related I am led to believe it is software considering the touch screen works flawlessly upon reboot but again I am not sure.
I have not added any new apps or anything like that to cause a memory leak or such. This problem started when I left the N7 for two days without touching it, then the problem happened after I tried to use it after the two days of inactivity.
Update: I turned the N7 off for about a day booted it back up now the touch screen is working every time I am confused.
So I still have 7 months on my ASUS manufactures warranty should I send this unit back? I just do not want to think its software related and it will get fixed through updates and then find out it is hardware related and be out of the warranty period.
I am on 4.1.2 with the last boot loader "not the new one"
latest version of TWRP
Thanks everyone in advance for your time.
It seems like a magnet bad effect to me! not sure though cuz the nexus 7 suppose to work fine with magnetic cases but it could be a Magnetic field effect. In my opinion as long as it works don't send it cuz you don't know what happens there in the service center, I mean once the device is opened it would never get the same as before.
Chaw Rash said:
It seems like a magnet bad effect to me! not sure though cuz the nexus 7 suppose to work fine with magnetic cases but it could be a Magnetic field effect. In my opinion as long as it works don't send it cuz you don't know what happens there in the service center, I mean once the device is opened it would never get the same as before.
Click to expand...
Click to collapse
Yea I had thought that was it but I took it out of the case and still does it so no dice on that field
well i flashed the latest google image and just started fresh. The touch screen is now working without issue so hopefully it was nothing still not sure though what would have caused this though -_-
Sent from my ADR6425LVW using xda premium
if anyone could shed any light on this issue it would be greatly appreciated thanks again.
Sent from my ADR6425LVW using xda premium
Hi guys. My almost brand new Samsung Galaxy S4 has just stopped working.
I was doing homework and one of my friends text me I look at the text and lock my phone screen and that was the last time I saw my screen working properly.
I later tried to turn on the screen but I had no luck, the screen wouldn't show anything, it was just blank but surprisingly it recognised my touch and made the sound. I could unlock my phone and even turn on apps by guessing where I kept them. I could turn on music and it would work but the screen would remain completely blank.
My phone was rooted and it had the stock rom but it had a custom kernel which enabled over clocking to 2.3 ghz (Ktweakers kernel I think) but the limit was set to 1.89 so I don't that that was the cause.
When I restart my phone the screen where it says "Samsung Galaxy S4 GT-I9505", I think its called the splash screen? I'm not sure, anyways instead of it being black with white writing, its really weird and is bright white with very light white writing. This is the only time the screen actually works, and the other time it works is when you try to put it into download mode but both times the screen is bright white and everything is very light and faded. After the "GT-I9505" screen goes away the screen goes black the blue LED still flashes and you can hear the samsung boot sound and the phone boots up properly without the screen.
What could be the cause of all this? I have literally kept this phone on top of my head. I have done nothing to harm it in any way what so ever. I have never dropped it. From day one I had a thick case incase I bumped it and damaged it. Anyone else having this problem? Or am I the only one? Do you guys think I'll be able to fix this or will I have to take it back to the store?
Thank you!
- Nafis A
*I will try to add a picture in a bit when I can get hold of a camera
NafisAhmed said:
Hi guys. My almost brand new Samsung Galaxy S4 has just stopped working.
I was doing homework and one of my friends text me I look at the text and lock my phone screen and that was the last time I saw my screen working properly.
I later tried to turn on the screen but I had no luck, the screen wouldn't show anything, it was just blank but surprisingly it recognised my touch and made the sound. I could unlock my phone and even turn on apps by guessing where I kept them. I could turn on music and it would work but the screen would remain completely blank.
My phone was rooted and it had the stock rom but it had a custom kernel which enabled over clocking to 2.3 ghz (Ktweakers kernel I think) but the limit was set to 1.89 so I don't that that was the cause.
When I restart my phone the screen where it says "Samsung Galaxy S4 GT-I9505", I think its called the splash screen? I'm not sure, anyways instead of it being black with white writing, its really weird and is bright white with very light white writing. This is the only time the screen actually works, and the other time it works is when you try to put it into download mode but both times the screen is bright white and everything is very light and faded. After the "GT-I9505" screen goes away the screen goes black the blue LED still flashes and you can hear the samsung boot sound and the phone boots up properly without the screen.
What could be the cause of all this? I have literally kept this phone on top of my head. I have done nothing to harm it in any way what so ever. I have never dropped it. From day one I had a thick case incase I bumped it and damaged it. Anyone else having this problem? Or am I the only one? Do you guys think I'll be able to fix this or will I have to take it back to the store?
Thank you!
- Nafis A
*I will try to add a picture in a bit when I can get hold of a camera
Click to expand...
Click to collapse
U can try to go to stock recovery and try to wipe cache and see if it boots up
If u have custom recovery wipe cache / dalvik/ fix permissn and reboot
else u should download a stock firmware and flash it using odin it will work incase even after u flash a firmware and again stuck at Logo etc go to stock recovery and wipe cache and reboot
123hiten said:
U can try to go to stock recovery and try to wipe cache and see if it boots up
If u have custom recovery wipe cache / dalvik/ fix permissn and reboot
else u should download a stock firmware and flash it using odin it will work incase even after u flash a firmware and again stuck at Logo etc go to stock recovery and wipe cache and reboot
Click to expand...
Click to collapse
Thank you for replying! I had cwm recovery installed but I reverted back to stock mod through odin. Now I am trying to wipe cache through stock recovery but the problem is that I can't see anything that I am doing. I am relying on pictures of the stock recovery. I know that my phone goes into recovery mode but it does not show anything on the screen. I am assuming I get stuck on the part where there are lots of no's and one yes.
Would It be possible if you could post a picture of that (The screen with all the no's and the one yes) because maybe then I can wipe the cache.
And I am already downloading the stock firmware, but it is taking forever because if the extremely slow internet. But the thing is that I don't see any logos, it boots fine but it doesn't show anything on the display. But I also know that the display is working because it still shows the "GT-I9505" screen. I'll post my progress here.
NafisAhmed said:
Thank you for replying! I had cwm recovery installed but I reverted back to stock mod through odin. Now I am trying to wipe cache through stock recovery but the problem is that I can't see anything that I am doing. I am relying on pictures of the stock recovery. I know that my phone goes into recovery mode but it does not show anything on the screen. I am assuming I get stuck on the part where there are lots of no's and one yes.
Would It be possible if you could post a picture of that (The screen with all the no's and the one yes) because maybe then I can wipe the cache.
And I am already downloading the stock firmware, but it is taking forever because if the extremely slow internet. But the thing is that I don't see any logos, it boots fine but it doesn't show anything on the display. But I also know that the display is working because it still shows the "GT-I9505" screen. I'll post my progress here.
Click to expand...
Click to collapse
I dont have a s4 with me now using htc one for while flash the firmware Stock one using Odin and wait for better result
123hiten said:
I dont have a s4 with me now using htc one for while flash the firmware Stock one using Odin and wait for better result
Click to expand...
Click to collapse
Okay so I downloaded the stock rom and flashed it with odin and it basically did nothing. Rather before flashing the stock rom, the splash screen would show (the screen that says "Samsung Galaxy S4 GT-i9505") but now it does not show anything. It turns on normally like it should, it makes the boot sound but does not show anything on the screen. If you have the lights turned off, you can see a flicker when it turns on and thats the only time the screen actually lights up. What do you think I should do? I still think it might be a software issue. Also I don't think I have warranty because I have flashed my phone a few times. Its still very upsetting that this has happened because honestly I haven't done anything to this phone.
- Nafis A
You steel have the garantee ? .. if you know what i mean
Sent from my GT-I9505 using xda app-developers app
karimdag said:
You steel have the garantee ? .. if you know what i mean
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Haha no I don't think so Well I'm still taking it back to Singapore but I will probably have to pay for the repair.
Does your screen not have cracked (from the inside ) ?
MichelN said:
Does your screen not have cracked (from the inside ) ?
Click to expand...
Click to collapse
I don't think it does. Because before flashing stock rom, the splash screen would show and it had no cracks. So no actual damage, I still think it is a software issue but I don't know how to fix it :/ I still can't decide if I should take it to Samsung (which will take like a few months) or I can take it to a local repair shop and they can look at it which shouldn't take more than a week.
NafisAhmed said:
I don't think it does. Because before flashing stock rom, the splash screen would show and it had no cracks. So no actual damage, I still think it is a software issue but I don't know how to fix it :/ I still can't decide if I should take it to Samsung (which will take like a few months) or I can take it to a local repair shop and they can look at it which shouldn't take more than a week.
Click to expand...
Click to collapse
For repairs it takes 2 weeks before you get your device back (at least in my country)
MichelN said:
For repairs it takes 2 weeks before you get your device back (at least in my country)
Click to expand...
Click to collapse
Repairing it doesn't take very long, taking it to the repair centre will take time. I bought my phone from Singapore and I have to take it there if I want to get it repaired. I took it to the Samsung repair centre in Bangladesh, they said they can't repair my model because they don't support it here :/
NafisAhmed said:
Repairing it doesn't take very long, taking it to the repair centre will take time. I bought my phone from Singapore and I have to take it there if I want to get it repaired. I took it to the Samsung repair centre in Bangladesh, they said they can't repair my model because they don't support it here :/
Click to expand...
Click to collapse
The samsung centre here will send it to a repair centre. Here i will lose the phone for max. 2 weeks.
same problem
The same exact thing happened to me yesterday. Opened a text from a friend, tried turning on the screen and black screen. Thinking of sending it to samsung but do you have a solution yet? Was the problem diagnosed?
My Samsung galaxy s4 i9505 screen is dead--
I woke up this morning and my phone is still charging... But I cannot see my any data in the screen.. But my phone is still working.. I can receive phone call with my headset.. I cannot see anything in my screen.. It gone black.. Can anybody help me to fix this.. Or is this a firmware issue.. My phone has been rooted and installed official android 4.3 jellybean. Please help!!!
Just today I spend the same, except that the screen starts flashing, and at times the picture and the picture looked twice was very unstable, it restarts, and for the image of the i9505 without problem.
He ruled out a physical problem as it starts each. Device failure begins after displaying the Device Model
.
The touch and other features of the device, work perfectly. Try booting in recovery mode and I could not look very bad image.
In trying to backup my data with titanium to try to do a factory reset, began to regain normalcy. And right there my device works perfectly.
Bring 7 hours working normally my device. But I have fear of failing again. And now looking for information about possible solution. No warranty now.
What do you recommend? It's failure is becoming common. My device is doomed to die without remedy? Thank you very much for your answers in advance. Use translator apologies. Speak Spanish
hello guys, i got mine i9505 lte version 4 months ago. yesterday i pull it out of my pocket i tried to wake the device up but nothing .. just black screen just like the guys before me here. so today i opened the phone and pulled out and push it back the display connector... AND VOALA WORKS AGAIN! but after 5-10 minutes and everything is again black?! wtf i said!?! its not normal! my screen is working flawlessly colors touch response... everything! do i have to reconnect the display connector every time? i think its not normal. what must cause this bug/glitch/issue?!?!
i am rooted with cwm and cyanogenmod 11... i dont think its caused by the rom? what do you think guys? give me suggestion before i try to demolish the phuking fone))
radibg said:
hello guys, i got mine i9505 lte version 4 months ago. yesterday i pull it out of my pocket i tried to wake the device up but nothing .. just black screen just like the guys before me here. so today i opened the phone and pulled out and push it back the display connector... AND VOALA WORKS AGAIN! but after 5-10 minutes and everything is again black?! wtf i said!?! its not normal! my screen is working flawlessly colors touch response... everything! do i have to reconnect the display connector every time? i think its not normal. what must cause this bug/glitch/issue?!?!
i am rooted with cwm and cyanogenmod 11... i dont think its caused by the rom? what do you think guys? give me suggestion before i try to demolish the phuking fone))
Click to expand...
Click to collapse
Hello Guys, this issues is very common when you rooted the device and install Wanam Xposed.
You can try flash a stock Rom and stock Kernel with odin, try to swipe cache and dalvin using ADB.
Good Luck!
Hey guys, out of nowhere today I go to use my Note 3 and the screen is black, I could tell it was on but black, it was backlit but black and had message notification going. Restarted it a few times by battery pull and same thing. Was ready to head to Verizon once they opened with hopes they could fix then it started working again. Has been working fine since but I'm nervous it's going to happen again, as I use my phone for everything and need it to work. Any idea of what caused this? possible fix? chance of it repeating?
Thanks
mgftp said:
Hey guys, out of nowhere today I go to use my Note 3 and the screen is black, I could tell it was on but black, it was backlit but black and had message notification going. Restarted it a few times by battery pull and same thing. Was ready to head to Verizon once they opened with hopes they could fix then it started working again. Has been working fine since but I'm nervous it's going to happen again, as I use my phone for everything and need it to work. Any idea of what caused this? possible fix? chance of it repeating?
Thanks
Click to expand...
Click to collapse
no maybe they tried flashing it again or maybe bad kernels no it will not happen again
Hi, how are you? Recently i was working on the pc with my phone next to the keyboard and i noticed a light on the phone, but i wasn't able to see what was that because it was gone too fast, i tough it was a reflection of my screen.
Now, the screen was on saying that i enter 5 wrong knock codes and i needed to put my PIN in order to keep using the phone. So, that light that saw was the notification light 'saying' that a knock code was entered incorrectly.
So thats the problem, the screen touches by itself when it's locked. It's seems that this problem appeared after installing CloudyG3, but i used several days without this problem?
Maybe it has something to do because of the low battery that i have now (15%-)? (I'm charging it right now). Maybe it's the kernel?
PS: When using the phone normally, the screen works fine.
Hello recently i had an issue with my proximity sensor it was stucked at 0 cm
until it felt down and then worked for a little time but then stopped again
So i decide to dissasembly it and clean the sensors and everything ( i blowed air and used a tooth brush too)
when i assembled everything back i booted on recovery to make a clean install of my rom
everything was going well until i booted the phone and after i typed my PIN code and drag the screen up to unlock it
then suddenly screen goes black and only turned on when someone calls me.
When im pressing the power/lock or home button always playing the lock sound.
Tried everything, i tried to boot the phone without each sensor but always doing the same thing
I tried to disscharge the phone, pulling of the battery and keep power button pressed for 1 minute but again the same thing
The phone is working well in TWRP (touchscreen) , Can someone explain to me what happend?
Also when someone calls me the proximity sensor is working well.
Running Mokee ROM android 6.0 but i tried to recover back to s4's official backup and the cyanogen release 5.1 but also got the same problem
I think its the proximity sensor could it be?
Is something wrong with my post? maybe i wrote too many and no1 reads it ? or no1 have seen this before?
Anyways i need help so much, i cant call anyone i cant read texts i cant do anything and i cant buy another one
It could be a hardware or software issue. Did you try to find a way to completely disable the proximity sensor in the ROM?
Was the phone dropped? Any loose connections in the phone?
Does this happen if you flash ROMs other than Mokee, for example, Cyanogenmod?
audit13 said:
It could be a hardware or software issue. Did you try to find a way to completely disable the proximity sensor in the ROM?
Was the phone dropped? Any loose connections in the phone?
Click to expand...
Click to collapse
No i couldnt find a way to disable the proximity in ROM and no the phone didnt dropped i will check for 100th time if any loose connections exists
but i dont think so, many times i try to unlock it and it doing some wierd thing like vibrating then it shuts down but without showing me anything.
Guys i think i damaged somehow the mainboard but i didnt do something so hard to damage something can i damage something with a tooth brush??
Strephon Alkhalikoi said:
Does this happen if you flash ROMs other than Mokee, for example, Cyanogenmod?
Click to expand...
Click to collapse
Yea i tried, as i said, the recovery backup from the stock rom, and also the cyanogen release 5.1 i dont remeber i think it was cyanogen 12.1 anyways it does the same thing.
The phone doesnt function properly.
Is there any ROM that it has only the basics calls text etc so i can try ?
chrisfy said:
Yea i tried, as i said, the recovery backup from the stock rom, and also the cyanogen release 5.1 i dont remeber i think it was cyanogen 12.1 anyways it does the same thing.
The phone doesnt function properly.
Is there any ROM that it has only the basics calls text etc so i can try ?
Click to expand...
Click to collapse
No, because the firmware isn't the problem. Your proximity sensor I believe is screwed up, probably from using a toothbrush on it and scratching the sensor. While I'm curious as to where you saw or heard that bit of advice since toothbrushes are abrasive, it's not really relevant.
Replace the proximity sensor.
Strephon Alkhalikoi said:
No, because the firmware isn't the problem. Your proximity sensor I believe is screwed up, probably from using a toothbrush on it and scratching the sensor. While I'm curious as to where you saw or heard that bit of advice since toothbrushes are abrasive, it's not really relevant.
Replace the proximity sensor.
Click to expand...
Click to collapse
Yea i thought in the begining that this is the problem but explain me why on call proximity works normal if i take the phone away from my ear screen on and if i get it back screen off simple normal.
Also i tried to boot the phone without the proximity connected on it and again it was doin the same thing and 1 more question does the proximity sensor have the possibility to lock the phone?
I really dont know what is going on propably i have to buy a new one i think
I used a tooth brush cause i didnt have anything else but i didnt put much pressure i just touched it
I must upload a video to show u whats exactly happening because its very stange i cant get to home screen with any way everytime it shuts the screen off
but if i choose to go to settings and get black screen when some1 calls and talk when i end the call it will show me the settings but if i try to get anywhere else i will get again black screen and when
some calls and end again the call it will show me that i was choosed before its so annoying really.
Forgive me for my bad english.
any suggestions?