{HELP] Can't recharge Redminote 3G - Redmi Note Q&A, Help & Troubleshooting

Hi guys, please help me fix this..
Before i install Lollicraft (TM) ROM by Dev Rahul Segal, my phone rom is samsung note webi tan, previously is normal i can charge when awake or off,
but after installation with from philz touch 6.58.9(Factory reset, wipe cache & all) i can't recharge my phone.
only can if on recovery mode...so sad..
please anyone help me

Related

[Q] really need help

Hello people i was using the new patch for 0% issue i mean the (fix arc, neo) upd v3.1 posted by Bazoocase and everything was all right,
i downloaded the app titanium and somehow i delete a file that i shouldn't delete, now my arc constantly reboot and when i try to charge with the official usb charger there is only a red light blinking for 2 or 3 minutes and then the phone turns on completely but after 1 or 2 minutes it shut down again and keep doing that all the time, tried to use the fast boot and does not recognize the phone, also tried to use the flash tool and no response,
every time i connect it to the computer it says device not recognized, i am desperate because i don't know what to do, maybe one of you guys can point me at the thread to solve this problem because i have been looking but i can't find the solution, or if somebody knows what to do plz enlight me since i am a really junior member
thks in advanced
Check this thread: http://forum.xda-developers.com/showthread.php?t=1312398

[Q] Help US Cellular R970 GS4

Hi. I am trying to help my brother. He has rooted his GS4 from US Cellular and has an old version of TWRP on it (2.6.0.0), but his phone stopped charging. I can wipe and install ROMs, and it seems to charge until I power the phone back on then it just goes to the Samsung boot up screen and freezes. I was thinking maybe it was because of TWRP being an old version, but I can't connect to my computer because I can't get it to recognize the phone.
Again, I don't think it's the charging port because when I boot up after initially installing a new ROM it shows it's charging. Any help would be GREATLY appreciated. Thanks in advance!
Sorry wrong forum :cyclops:

Problem with my XPERIA E4 [Bootloop]

Hi guys..
I have problem with my XPERIA E4 (2115)..
I rooted it and unlocked his bootloader officially..
And tried to flash CM 12 for MTK-6582 on my device by using Flashtool..
But after I had flashed the kernel boot.img.. It's bootloop.. So its failed..
And my bad luck the device's battery down 0%.. So I can't enter to fastboot mode..
I'm trying charging it but it's bootlooping on Sony XPERIA logo and dont charging..
I want charge it to turn into flash mode and flash Sony Official ROM again Kitkat 4.4.4..
Any idea ?! My device down now.. I can't charge it or change anything..
I want restore my mob.. Help me, Please !!
Thanks!!
How did they help u?
Please share with me how they did help u please
Plug in your phone into the charger, and wait for a while (e.g 1 hour). It should change your battery from 0% into 1%. Then, disconnect the phone and try to enter fastboot mode.
I need help on how to fix the Sony logo screen it doesn't pass beyond that point
Mine can charge but cannot pass the Sony logo screen
I need help on how to fix it I tried flash tool but still no luck
Please do
I'll be so much grateful please Help
Akanibudya said:
I'll be so much grateful please Help
Click to expand...
Click to collapse
You can always falsh stock firmware by Flash tool.Download firmware for your model and guide is here.

Help phone won't boot hardbricked?

Hey guys i have a samsung sm9005 note 3 and it was working awesome i had it rooted and have tested many custom roms from this forum .
The battery was dying so i replaced it with original battery and it worked perfectly i was on Phronesis Rom N7 v7.0 Feature Rich & Smooth and it was my daily driver untill i decided to flash the [ROM][9.0.0_r37][HLTE/CHN/KOR/TMO] Pixel Experience [AOSP][UnOFFICIAL]
i flashed it successfully through trwp 3 version and it booted properly and i was using it daily i bought a new phone and i kept my note 3 aside for a month i decided to use the phone again and put my note on charge but i dint see any charging light i let it charge for few hours and tried powering on but it didn't . I tried to boot into recovery it didn't . Tried to boot into bootloader mode so that i can flash back the previous rom but it didn't boot into dowload mode
I searched in forum and i believe it's a hard brick and there are solutions like using debrick.img and qfile software but since i had my phone on 9.0 will the debrick.img shared in fourm work?
Please suggest me the solution i dont want this phone to die? please help me resurrect it
Not booting to download mode try the USB recovery jig via google or ebay .
Simple, use another battery to boot it.

Huawei Mediapad M3 lite 8" - CPN-W09 died

Hi
I have an old Mediapad M3 lite 8" with stock rom .
Yesterday after a full discharged battery, I put it in charge and start it , after 1 hour I turned on it and it goes in loop with huawei logo continuously .
Well .... I decided to do an hard reset, entered in recovery mode and did a full wipe to recover it .
The procedure was done, the tablet start and tell me as usual questions, language, google account, wifi etc .... it starts to install the last google backup found, this for a couple of minute when it turned off for ever .
Now is not possible to turn on it, not power on, not possible to enter in recovery, nothing , I tried also to disconnect battery hoping in a reset but nothing changed .
What do you suggest to do ???
In this moment if I connect it to my PC I see only the Qualcomm HS-UB COM port .
If I remember well there is a procedure to reinstall the full stock rom ( if someone could help me I appreciate it ) , but I cannot found the stock ROM CPN-W09 .
Help me please
thank you do much
Daniele ....#

Categories

Resources