Database Users

Need your help for my blank screen

Last night I try One Click Lag fix made by RyanZa, it seems that it didn't work as I found in the windows that permission denied and after check from Quardant Standard, it still 889, I have used Busybox 1.17.1.
And then I tried the solution made by Tayutama http://forum.xda-developers.com/show...&postcount=417
I manage to have the new app MCR Scrips in my app list and click LagFix1024.sh. There is a note ..... wait for long time....., during this process, my screen keep going to be blank screen... and suddenly it is blank, even I have tried to soft reset, it is still blank, just appear the samsung logo, samsung sound and then no screen but blank.
I am panic then and got the idea to flash it, Hold down down+powerbutton+Menubutton, it can go to download mode and can flash to I9000DXJG4 until complete but can not boot.....
The device still look like in shut down.
I plug off the cable and then Hold down up+powerbutton+Menubutton try to reboot, samsung logo and after that sound and than keep in blank screen......
Please help .... please .. please... I don't have any idea what should be done next....
Thanks a lots before

[Q] Changed density - now its looping!

Hi, i was playing around with the density changer app, and ofcourse i wanna try to see how it looked at 100, after a did that, it took a bit to boot then it just showed the desk and started all over again, and now its just restarts all the time, but it just shows me the samsung logo, and after like 5 min of restarts the desk appears again but it dissapear after 4 sec so i have no chance to let it load up and acces the meny to start the app and change. what to do?
i know its my own fault, just gut it from my girlfriend so.
regards jonny

Access recovery then reformat.
Sent from my SGH-T849 using XDA App

Does it still do it after a coldboot? (hold power button until it turns off fully, then reboot)
If so, then you've managed to set it in the build.prop file, if you can get to it (adb shell or adb pull/push), you can edit /build.prop on the device and change the 100 value back to 240.
I don't think a "factory reset" will reset the build.prop file, in which case the alternative would be a complete reflash.

knightnz said:
I don't think a "factory reset" will reset the build.prop file, in which case the alternative would be a complete reflash.
Click to expand...
Click to collapse
Actually if I remember correctly, it does reset build.prop.

Thanks all for the answers, i was trying all the 3 buttons way to get into a form of loaders even the force upload one before i was in here.
But then i pluged in the cable from the computer and started the tab and when it had load up everything, everything was fine:S
If someone has the same problem try that, dunno why it would work but it did.

[Q] Changed DPI to 200. Phone bugged out.

Well today I went full retard and decided to modify the build.prop and change the DPI to 200 from 480. Now whenever I turn on my phone it alternates between two pop ups taking up the whole screen. One of them says "unfortunately, the process com.android.systemui has stopped" and the other says "unfortunately, touchwiz home has stopped". I cant do anything on my device apart from changing the volume and pressing "OK" on the messages. I have access to the stock firmware but I dont particularly want to wipe my phones data. I have already tried using adb but cannot as the authorization window wont appear on my phone, meaning that my device remains unauthorized. I was hoping that someone here could provide me with a solution to this problem. Would it be possible to somehow extract the stock build.prob from the stock firmware and flash it onto my device?
Thanks in advance

[Q] [Help] Stuck in download mode

I was trying to get my VS980 back to lollipop from CloudyG2 2.2 so that I could put use CloudyG2 3.1. I was completely fine with using 2.2, but after using the phone for a few hours an error would pop up that said "unfortunately, com.android.phone has stopped working" and if I pushed "ok" on that, it would just pop up a second later and take me back to the home screen, until eventually I would just have to shut off my phone and restore from a backup, and them a few hours later the same thing would happen. SO I tried to get back to stock lollipop for CloudyG2 3.1, and I installed all the drivers and got into everything all hooked up to the ADK flash to stock program, and once the green bar on the phone started filling up, I hit "EXIT" on the Flash tool. After that, the phone stayed at 20% on the firmware update screen for a bit, until I eventually turned it off. Now, when I turn it back on it just shows the LG logo for a few seconds and then goes straight to the firmware update screen. Plugging it in from there just has it try to install the MTP driver for a bit until it fails and then it doesnt get recognized by my computer. trying to do the factory reset button combo brings up the white reset screen, but hitting yes just takes me back to the firmware update screen. Sorry for the long post, but I just wanted to be REALLY specifc with my problem.
You know what the funny thing is, though? I never even wanted to root my phone or do any of this stuff. I just had to find a way to get my phone to charge faster, not use so much battery, and not heat up so much like it had been doing since I updated to lollipop.
Thanks in advance for any solutions you have

runninsavvy said:
I was trying to get my VS980 back to lollipop from CloudyG2 2.2 so that I could put use CloudyG2 3.1. I was completely fine with using 2.2, but after using the phone for a few hours an error would pop up that said "unfortunately, com.android.phone has stopped working" and if I pushed "ok" on that, it would just pop up a second later and take me back to the home screen, until eventually I would just have to shut off my phone and restore from a backup, and them a few hours later the same thing would happen. SO I tried to get back to stock lollipop for CloudyG2 3.1, and I installed all the drivers and got into everything all hooked up to the ADK flash to stock program, and once the green bar on the phone started filling up, I hit "EXIT" on the Flash tool. After that, the phone stayed at 20% on the firmware update screen for a bit, until I eventually turned it off. Now, when I turn it back on it just shows the LG logo for a few seconds and then goes straight to the firmware update screen. Plugging it in from there just has it try to install the MTP driver for a bit until it fails and then it doesnt get recognized by my computer. trying to do the factory reset button combo brings up the white reset screen, but hitting yes just takes me back to the firmware update screen. Sorry for the long post, but I just wanted to be REALLY specifc with my problem.
You know what the funny thing is, though? I never even wanted to root my phone or do any of this stuff. I just had to find a way to get my phone to charge faster, not use so much battery, and not heat up so much like it had been doing since I updated to lollipop.
Thanks in advance for any solutions you have
Click to expand...
Click to collapse
Nevermind, I just didn't have the most up-to-date Verizon drivers installed. Boy, do I feel stupid

Zenfone 5 Kitkat Systemui error? No wallpaper, buttons doesn't work, no notification

Hey there guys, my zenfone 5 runs on android kitkat and the build number is T00j_WW_user_2.21.40.44.
One day my phone hanged and then restarted, but afterwards i noticed that the wallpaper was gone, the home button and recent button doesn't work. I can't see the notification bar or pull down the notification panel. I realized it was a kitkat problem, probably the systemui. So I decided to do the following:
Since I reset the device a few times, the problem still occurs. Also I don't get any pop-ups for incoming notification such as messages or phone calls. So factory resetting didn't do. I thought of rooting the phone and flashing a new rom.
But i couldn't get the device to authorize (since the pop-up after connecting the phone to the PC doesn't come) so I cannot root the device. I cannot access the recovery. I cannot flash TWRP. The device shows up as "unauthorized" in cmd in adb. I tried the ADB command but that doesn't work as well.
Anyone have any suggestions?

Hello, BoiXI.
You can get into DROIDBOOT, as in this video?
youtu.be/ixfwxwnbeFM

Hello, BoiXI.
You can get into DROIDBOOT, as in this video?
youtu.be/ixfwxwnbeFM

mlhzv2204 said:
Hello, BoiXI.
You can get into DROIDBOOT, as in this video?
youtu.be/ixfwxwnbeFM
Click to expand...
Click to collapse
Hello, thanks for replying. I've tried going into recovery mode but there is no words written underneath the lying android icon. In my phone's recovery there is only the lying android with a red-triangle symbol. I've tried using the volume buttons but it doesn't work.