There three files should come up when pressing *#1234# in my phone however, it is showing only two files. CP file is missing from there. The service person is saying that i have to replace motherboard however, i think that because file is missing so it should be updated through software. Please let me know if there is a way to do that.
Flash stock rom through Odin will give you all files .
Questions belong in the Q&A section .
JJEgan said:
Flash stock rom through Odin will give you all files .
Questions belong in the Q&A section .
Click to expand...
Click to collapse
Could you please help me how to do that? I have not done that thing in past.
If your phone works then leave it alone .
Basics are posted multiple times .
Try a Factory Reset first .
MODEMS /baseband
http://forum.xda-developers.com/galaxy-note-3/general/ref-galaxy-note-3-sm-n9005-gsm-modems-t2842806
Download stock firmware from sammobile dot com
http://www.sammobile.com/firmwares/database/SM-N9005/
Related
Can someone please help me find those files?? it will be GREATLY appreciated since my phone is pretty much useless now. and it has no service, nothing. its just stuck in recovery mode, so need to bring my phone back to I9020T STOCK, i had flashed it on a bad rom and this happened . please help!!!
you only need to search for odin, and you would have found this http://forum.xda-developers.com/showthread.php?t=947950&highlight=odin
read the whole topic, the download files are there
AllGamer said:
you only need to search for odin, and you would have found this http://forum.xda-developers.com/showthread.php?t=947950&highlight=odin
read the whole topic, the download files are there
Click to expand...
Click to collapse
Looks like the latest link to odin files on that 14 page thread has expired.
Odin is the saviour tool for all Samsung devices. The method for flashing by Odin differs from device to device.
This thread will give step by step instructions on how to flash a stock rom from Odin on the GT-I9070/p :
A. Download Odin tools from here : http://d-h.st/3zJ
Pass : shaaan
B. Download the stock rom from www.samfirmware.com
Setting up Odin :
1. Make sure you have installed the necessary drivers for this device. The drivers can be installed from within KIES or seperately. (I will upload the drivers shortly).
2. Run Odin as administrator.
3. Setting up the files is divided in two types depending on the firmware type :
a. If the firmware is a multi package file, put the files in the corresponding sections.
ie. CSC file in CSC section, PDA file in PDA section.
b. If the firmware is a single package, add the single file in the PDA section.
4. Now that Odin is setup, put the phone in download mode. To do that, power off the phone and press 'home+power+volume down' buttons together. Keep the buttons pressed till Download mide appears.
5. Now that Odin and the phone are setup, connect the phone to the device. Odin will detect the device and show something like 'com port (1)'
6. Flash the device.
7. The flash will take 5 minutes for a full flash on average.
8. When the flashing is complete, DO NOT remove the device until Odin shows ' PASS '.
9. The device will reboot. Remove the device, go to recovery mode and do a factory/data reset.
That's it. Happy flashing peeps..!!
Awesome guide mate - messing around with our device without Odin is risky !
This should be sticky. A lot of people is asking how to revert to original FW, or similiar questions that is connected to reverting. And it is almost at the end of forum, and thay cant see it.
I pmed the mods to do it. But they won't budge..
Please pm them..
Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium
Very good guide,good work !
It may be better if you add some images
atishey23 said:
Nice guide!!!
And adding images would be a nice option.
And plz add a point which tells which buttons to press like
"Re-Partition" ,"Auto Reboot","F.Reset Time" ,"Flash Lock"......
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.
th3cr0w said:
From what I was able to find in other guides it is ONLY 'Auto Reboot' and 'F. Reset Time' to be checked.
All others to be unchecked.
There are some posts not to bother with that .pit file that is inside Odin .zip file.
Odin package from sammobile got 2 .pit files for 8GB - GT-I9070_EUR_XX_8G and GT-I9070_EUR_XX_8G_20111220_KL6 and one for 16GB
(at least paired with XEO region XXLD1) not only that one we got in link form 1st post.
I was also able to find some info that if you use .pit check also 'Re-Partition'.
Now I am curious about if It would be good idea for me to actually Re-Partition my phone - bought it used (not new) and my PC detects only 4GB of internal SD. Will it increase custom binary counter? (so far it is at 0 and I would rather keep it that way)
Is it going to fix that issue so I will be able to use all 8GB (minus system partition)?
If so how to use it and what .pit file to take?
.pit only, re-partition only and run it once, then single-package as PDA with reboot and F. Reset on another flash run?
Or maybe all at once?
BTW you guys ROCK.
Rooted SGS i9000 2 years ago with this forum and now I am very close to do it again with SGSA.
Click to expand...
Click to collapse
It is normal to have 4GB on internall SD. The rest of it goes to system partition, application partition and RAM I think...
shut_down said:
It is normal to have 4GB on internal SD. The rest of it goes to system partition, application partition and RAM I think...
Click to expand...
Click to collapse
googled a bit more and found it out too :crying:
BTW - both of those 8GB .pit files are identical (according to 'comp' tool in windows) so there is no reason to use re-partition - other than sth went totally wrong and you are trying to recover from brick or sth serious as this .pit file is already on your device.
Just flashed unbranded stock for XEO region - original one was branded.
NOTE to anyone who is still thinking about safety of this method:
After initial reboot - when it was reconfiguring in recovery mode - or however you will call it (just before odin should say 'pass' - still in that little font screen) windows started to reinstall usb drivers - odin log in bottom corner said 'disconnected' and even then my newly flashed ROM is working as it should. I would rather keep it connected till Odin confirms all went as intended but in case of similar issue - do not get heart attack
odin is used for flashing stock roms only???
Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
nope it can also be used to flash custom Roms and kernels though flashing custom kernels via odin will increase your bin counter !
Hello guys...
How are you? I´m new on the i9070 threads!!! I´ve had others phones before, like SG2, xperia sola, live with walkman... so, i need the password to descompress odin... i search on thread but i don´t found it...
SORRY I found the password... shaaan
Of what I understand, can I test an unlimited number of stock firmware and the binary counter remain 0?
If I flash an unbranded firmware can I use SIM cards from other providers?
Now my phone is branded and I can not use SIM cards from other providers.
Thanks.
Kulwinder Singh said:
odin is used for flashing stock roms only???
Click to expand...
Click to collapse
Read please, sir!
http://forum.xda-developers.com/showthread.php?t=1985199
:laugh:
Someone help me? LINK
Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???
sonimayurp said:
Hi i have downloaded the russian jelly bean 4.1.2 package but when i tries to flash it using odin3 v1.83 it shows me "The Parameter is incorrect" why???
Click to expand...
Click to collapse
Try to remove .md5 from filename.
shut_down said:
Try to remove .md5 from filename.
Click to expand...
Click to collapse
Hmm it worked thx..
Flash JB
Hi, I want to flash Jelly Bean , do i need to use the pit file , or just select one package and then select the rom??
Edit : flashed
This version of Odin does not work when flashing JB to my device.
I successfully used Odin3v3.07 from this post: http://forum.xda-developers.com/showthread.php?t=2086965
Please update this guide. I spent quite a lot of time trying to figure out what was wrong.
Thanks
Samsung Galaxy Y, Idk what problem I have but im really confused now withh all the non sense. Idk if its looping or not cus sometimes it boots. then after a few minutes turns off again. I can go to Volume up+ home button + lock button then i tried the system recovery. it worked but then it booted up then after a few minutes same problem. Now it turns on and off and whatever. I tried the odin stuff. I downloaded usb drives then odin and the md5 thing. I tried first. it didnt show ready on the odin while i was on download. then next it showed a blue thing so i thought it was ready. I clicked the PDA with md5 in it. then clicked start. but it said FAILED. now idk what to do.
what else can I do and can someone pleaseee explain it step by step. thank you
Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file
marcussmith2626 said:
Download the firmware files for your country from dokys thread at the top of of dev section
If you have kies installed stop it from running or Uninstall it
Install Samsung drivers http://forum.xda-developers.com/showthread.php?p=11498043
connect phone to pc
put phone in download mode (vol down home & power button)
right click on the odin icon and run as administrator
place csc file in csc
Modem in phone
Pda in pda
start flashing process
Do not repartition or use pit file
Click to expand...
Click to collapse
what is csc file and modem. I only have pda file named recovery.tar.md5
MeetJunx said:
what is csc file and modem. I only have pda file named recovery.tar.md5
Click to expand...
Click to collapse
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers
his rponele
marcussmith2626 said:
Goto dokys thread in dev section!!! (sticky at top for odin firmware)
Download the firmware for your country
unzip the file & you will find modem pda & csc
Please just follow what I say - read dokys thread and you will have all your answers
Click to expand...
Click to collapse
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you
MeetJunx said:
Okay thank you I think this is what I need. but i'll do this tomorrow. But one more question. What will I download here? theres like 5? im from the Philippines. Thank you
Click to expand...
Click to collapse
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is
marcussmith2626 said:
Iv no idea which is latest one for you
as a guide the first two letters represent region - xx = European then the further down alphabet next letter is the newer it is
Click to expand...
Click to collapse
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?
already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too
MeetJunx said:
so I followed everything. I have the csc modem and pda. But when it almost finishes like the green thing is almost done. The Cellphone turns off. resulting to failure. What do I do next?
Click to expand...
Click to collapse
It will turn off normally - leave it don't interrupt it or try another firmware
akosicarlo said:
already tried to flash it back/again on stock rom ? maybe it will help
im from philipines too
Click to expand...
Click to collapse
hey, Idk what flash or stock rom is. but im googling it right now. and im looking at a video. will this solve my problem with it turning off?
yeah ....
flash stock rom thru odin
note: after the process had been complete it will AUTO REBOOT (dont do anything on the phone) unless it already boot up
s3 deadboot successful but wrong flash as n7100 with pit file.
now the s3 has starting sound , charge ok , but no display.
computer show it as n7100
i jig the phone to download mode and full flash with i9300 file.
but odin doesnt let me work on partition part.
i already tried 5 pit file , still doesnt work .
does anyone know how to solve this problem ? thanks !
Questions go in q&a forum, report your post and ask a moderator to move it.
Flashing a wrong file usually requires a new motherboard and/or display. Try the rescue firmware, in general forum, as last resort.
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance
uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious.
Click to expand...
Click to collapse
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol
thisisapoorusernamechoice said:
Did you try towelroot?
Also don't keep saying what I quoted you on. Someone less nice than me is going to jump down your throat for it lol
Click to expand...
Click to collapse
Thanks for the advice and yes i tried towel root it tells me "This Phone isn't Supported"
uroboch said:
First sorry if this has been asked the forum is rather large and sifting thru all the posts is a bit tedious. Is there a root out for the t537v module of the galaxy tab 4?
Thanks in advance
Click to expand...
Click to collapse
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .
repey6 said:
Hi ,
I think you have latest build now (4.4.4) , yes ? If yes , you must to try to flash via Odin older firmware http://www.sammobile.com/firmwares/download/34971/T537VVRU1ANE2_T537VVZW1ANE2_VZW/ from any source . Before flashing you must to do factory reset . Then to try Towelroot . Perhaps you must to try like here http://forum.xda-developers.com/showpost.php?p=58501194&postcount=245 . Then freeze or delete update service . If all will be fail , flash your last firmware again (for return back) .
Remember , you lost data when do factory reset .
You not afraid nothing .
Click to expand...
Click to collapse
Trying this now i will let you all know how it goes.
uroboch said:
Trying this now i will let you all know how it goes.
Click to expand...
Click to collapse
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.
uroboch said:
Sadly i couldn't get the old firmware to flash onto the device. if anyone has done this and had luck please let me know where you got the firmware and what you did to get it to work.
Thanks in advance.
Click to expand...
Click to collapse
Please wait little . I can to give you this firmware in the night .
Ready
UPD.Strangely, some problems with the archive. try to understand
Try this . May be you can to flash this tar-archive . If no , i will search new right archive .
See last post
I will try to fix it in afternoon
downloading the tar archive now i will let you know if i have success.
Thanks
uroboch said:
downloading the tar archive now i will let you know if i have success.
Thanks
Click to expand...
Click to collapse
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .
repey6 said:
https://www.androidfilehost.com/?fid=95916177934538217
All is OK !
Archive is good . My tab shows that archive is bad . And my PC shows that archive is normal .
Click to expand...
Click to collapse
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1
uroboch said:
the message I'm getting is SW REV CHECK FAIL : [aboot]Fused 2 > binary 1
Click to expand...
Click to collapse
you flash archive from https://www.androidfilehost.com/?fid=95916177934538217 ?
That's the archive I'm using. I don't think I'm using Odin right.
uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin ZIP file
Open Odin v.3.09
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
uroboch said:
That's the archive I'm using. I don't think I'm using Odin right.
Click to expand...
Click to collapse
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.
uroboch said:
these are the directions I'm using to flash the device
http://primehowto.com/update-galaxy-tab-4-10-1-lte-verizon-sm-t537v-android-4-4-4-kitkat-t537vvru2ank1-official-firmware/
"How To Install T537VVRU2ANK1 Android 4.4.4 KitKat On Galaxy Tab 4 10.1 LTE (Verizon) SM-T537V Manually"
using the tar you gave me
Still getting above mentioned error on my device after i start the flash and it fails. Alas it appears i shall have to wait until someone figures out how to root the newest firmware.
Click to expand...
Click to collapse
So , good guide . Follow him . Unfortunately install this firmware does not work.
You dont try flash only older kernel like PDA via Odin ?
I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help
uroboch said:
I also tried to flash using odin 3.07 and the PDA option but it fails.
Thanks again for all the help
Click to expand...
Click to collapse
Wait little i ask guru
repey6 said:
You dont try flash only older kernel like PDA via Odin ?
Click to expand...
Click to collapse
And why exactly shouldn't they try that? That's exactly what they're doing here I even contacted the moderator to verify that. Plus I used that method to re-root after I had to Odin back to complete factory stock. I don't see what the problem is flashing just an older kernel, rooting using towelroot, and then flashing the most current kernel. That's exactly how my tablet is rooted and was on the most current firmware (OA2) before I flashed Cyanogenmod