Related
★★★This topic is for them who are having problems with stock charger and cable. If you don't have any problems, ignore this ★★★
Well, since I purchased my Note 2, I kept facing this slow charging problem. Now what is slow charging some of you will ask? Well, it's simple. The device is taking more than normal time for charging. Now how do you know the default/should be rate for charging? Simple again. The AC adapter clearly says output rate as 2000 mA or 2.0 A. So with that calculation Note 2's monstrous 3100 mAh should be fully charged with 2 hours. But as we've seen steady 2.0A is not the output case in some/many scenario, so add another 30 mins to it. So whatever it is, from 0-100%, the device shouldn't take more than 2 hours 30 minutes.
And for me, it was taking around 5 hours! Sometimes 4 hours 30 minutes, and if it's very fast then 4 hours. Well I was never gonna wait 4 damn hours before going to my office and irritate myself, and I don't have the habit of charging overnight, unless I absolutely need it.
So I kept calling my retailer, asked for replacement, and they did, well, you won't believe, they replaced three times actually, so I had three different Note 2, with three different charger. Well, each of them acted absolutely fine at first 3-4 charge, then the problem was back again and again. I in fact turned off the device and put it into trash once.
Then I thought let's try some different USB cables, I tried my friend's Galaxy Ace cable. Charging current kept fluctuating between 1000-1200 mA. Which was better than those faulty stock cables, which provided steady 900 mA. Sometimes it even was detecting the AC current as USB, which would provide a mere 460 mA and would take God knows how long! Then I found my piece. I went to my retailer, frustrated and angry, asked them to give me the thickest and shortest possible cable, and they provide me one from a Samsung phone's box, but I can't recall which device was that! And then I sat there for half an hour, kept plugging and unplugging, and the current rate was rock steady at 1800 mA. I took it, paid just 10$ and came back.
Since then I have charged my phone almost 10 times and the current rate never went below 1800 mA / 1.8 A.
This is the cable I am using, do notice that it has 5 pin set up against stock cable's 4 pi, if that matters in any way, and it's about 10% thicker than the stock cable and also about 9" shorter.
And how will you monitor the charging current, three ways are there,
1- Battery Monitor (yet I don't know how to exactly use it)
2- If you are rooted (which is a must anyway), then just go to, /sys/class/power_supply/battery/current_avg
3- Use the app from the link below. It basically reads the current value just exactly as above but it saves the time to go into that file every time. A big thanks to Deadvirus.
Galaxy Charging Current application's apk can be found here:
http://forum.xda-developers.com/showpost.php?p=36124435)?
Play Store link: (Paid)
https://play.google.com/store/apps/...S5hYm1hbnRpcy5nYWxheHljaGFyZ2luZ2N1cnJlbnQiXQ..
Thanks to this post and it's poster for informing us about the current output reading path,
http://forum.xda-developers.com/showpost.php?p=33585646&postcount=31
The included cable charger that mine came with charges fast like that, I let it charge slow with standard USB port overnight, but the included charger nd included cable should achieve this. The cable is important.
kebabs said:
The included cable charger that mine came with charges fast like that, I let it charge slow with standard USB port overnight, but the included charger nd included cable should achieve this. The cable is important.
Click to expand...
Click to collapse
Same here, it's done within about 2 hours every time, from ~1%. Something definitely must have gone wrong with yours :s
R: [SOLUTION] Slow Charging!
You are amazingly right. Every charger/cable combo I test seems to deliver different currents, according to the app you posted, ranging from 600 to 1300 (mA?).
Didn't know that could happen. Now I am looking for the Holy Grail of chargers, too.
After some tests: original chargers of Note 2 and Tab provide 1800 mA; no-brand Chinese labeled 1500 gives 1400; one Nokia labeled 1200 gives 1300, another, labeled 1200, gives 1200. Puro brand, labeled 2100, gives 1100. Another Chinese, no-brand, labeled 2000, double usb, gives 1100 per socket. Other no-brand samples give 600 or 300 mA.
Enormous variability.
Think I'll use the 1800 mA Samsung for when I'm out, and the good Nokia's for overnight charging when home.
Sent from my GT-N7100 using xda premium
And I ve been wondering why the heck original cable is too short. I thought samsung were just tight gits. Cable is mot even long enough to reach feom the wall to bed side table
Sent from my GT-N7100 using xda app-developers app
no problem whatsoever with mine , charging from 1 to 100 % in about 2 - 2:10 hours
Thank you for nice explanation! Now it's much clearer.
For me...
Stock charger + stock short cable (0,9 m) = ~2+ hours
Stock charger + some other cable (1,8 m) = ~4+ hours
,don't know about thicknes. Mb stock cable is thicker, or at least harder to bend.
Sent from my GT-N7100
Thanks for the APK, I found a huge variance in charging rates based on a combination of chargers and cables. Goes to show that the cable makes a huge difference. Here's my findings:
** Stock Charger (2A):
w/Stock Cable (4-pin) - 1698
w/Cable from another phone (5-pin) - 1698
w/Cable from battery pack (5-pin)- 1698
w/generic eBay cable (4-pin)- 100! - It didn't charge at all, even with screen off.
** iPhone Charger (1A):
w/Stock Cable (4-pin) - 1300
w/Cable from another phone (5-pin) - 1100
w/Cable from battery pack (5-pin) - 1300
w/generic eBay cable (4-pin) - 100!
** Car Charger (1A):
w/another generic eBay cable - 490
(Was running Redpill kernel, not sure if that has fast charging built in which might affect results).
The app is really helpful. Been wondering what the charging current was on different chargers.
I measured it using the app based on current AVG and not current NOW. This is because I used a 800ma blackberry charger and yet current now shows 1698 which is impossible.
The app will tell you which cables and chargers are good. I was shocked that out of my 8 cables only 3 gave an average of more than 1000, the rest give around 800 or less.
Sent from my GT-N7100 using Tapatalk 2
Hi!
So, the AC adaptater mentionne 2A but it doesn't mean that your devuce consume 2A... It means that the AC adaptater can provide 2A under 5V.
If a load need to consume 500mA the adaptater can provide enough power. But if it needs more than 2A, the ouput current will be at the 2A max but your voltage will decrease (it means that you have a device problem!).
The only thing to do is to refer to the user manual of device.
One thing more, the USB protocole fix the maximun current to 1A!
An other thing, if you want to have a better battery life it recommended to charge your battery slowly. Just have the habit to charge it during the night.
See ya.
Sent from my GT-N7105 using xda app-developers app
I also got an lg very thick cable..which is also 5 pin and let me tell it charges REEEEAAAALLLLYYYY FAST..when seen in application posted in op(thanx) it shows 1800..but the problem is if I detach charging before battery full notification then the battery is consumed at very high rate..I.e battery life decreased or maybe shows fake battery percentage. .and if I go for full charge it takes half hour more after 100% to show battery full in notification. .
Sent from my GT-N7100 using Tapatalk 2
lucier said:
Hi!
So, the AC adaptater mentionne 2A but it doesn't mean that your devuce consume 2A... It means that the AC adaptater can provide 2A under 5V.
If a load need to consume 500mA the adaptater can provide enough power. But if it needs more than 2A, the ouput current will be at the 2A max but your voltage will decrease (it means that you have a device problem!).
The only thing to do is to refer to the user manual of device.
One thing more, the USB protocole fix the maximun current to 1A!
An other thing, if you want to have a better battery life it recommended to charge your battery slowly. Just have the habit to charge it during the night.
See ya.
Sent from my GT-N7105 using xda app-developers app
Click to expand...
Click to collapse
Yes, the stock charger doesn't provide full 2A current.
And is it true that if the device is charged slowly the battery backup will be better? I mean that would be good then. I'll try that, thanks for informing.
sumeshd said:
I also got an lg very thick cable..which is also 5 pin and let me tell it charges REEEEAAAALLLLYYYY FAST..when seen in application posted in op(thanx) it shows 1800..but the problem is if I detach charging before battery full notification then the battery is consumed at very high rate..I.e battery life decreased or maybe shows fake battery percentage. .and if I go for full charge it takes half hour more after 100% to show battery full in notification. .
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
On my old cable, the damaged stock one, it'd take half an hour to reach 100% from 99. With this one it takes 5-6 mins.
This whole charging process is complicated that much I can say.
'Swyped' from my GT-N7100
Unfortunately I got a grey import so my stock charger was for a different country.
I'm having to use a 1.0A charger instead.
It still only takes a few hours to charge though. I sleep for 4-5 hours and it's always fully charged when I wake up.
Sent from my GT-N7100 using xda app-developers app
Hmm is this a accurate way of measuring amp?
I was using same cord and the apk provided above, using the default 2amp charger says 1697 and using a bellkin in charger rated at 1amp,says the same thing?
Hmm
I am a bit confused, which of the following is my actual charging rate? The charge is really slow, around 15% per hour or so.
Sent from my GT-N7100.
Those who help noobs go to heaven. True story.
As I stated in the screenshot, you shouldn't look at current_now, it'll always be same, 1698, you should look at current_avg.
'Swyped' from my GT-N7100
Damn. That means it's time for me to get a new charger, isn't it?
Just switched to a very old 0.7 A output charger my father uses on his primitive samsung device. It gives better results than my stock charger/USB cable, provided by samsung. 800 mA on a 700 mA charger. How is that even possible?
Sent from my GT-N7100.
Those who help noobs go to heaven. True story.
SacGuru said:
I am a bit confused, which of the following is my actual charging rate? The charge is really slow, around 15% per hour or so.
Sent from my GT-N7100.
Those who help noobs go to heaven. True story.
Click to expand...
Click to collapse
are using stock cable ?
yahyoh said:
are using stock cable ?
Click to expand...
Click to collapse
Yeah I am. The stock charger says 2A, 5V. When used with the stock cable it charges at a mere 200-400 mA. I used the wall charger of an old samsung phone (doesn't have a usb cable, just a wall charger) and current rises to 800mA. Where can I buy a good USB cable at in the UK?
Sent from my GT-N7100.
Those who help noobs go to heaven. True story.
I have buy a new stock charger because I was thinking my stock one was dead (slow charging / usb mode)...
But in fact it's not my stock charger who is defected but it's just the cable!!!
Just try with another cable and it's OK (AC mode).
Thanks for the apk!
Hello,
First off I want to preface this by saying I have my bootloader unlocked, rooted, running a 6.0.1 ROM.
This past weekend I noticed that my phone wasn't charging on a generic 4 port USB charger that I have. Made sure it had power, tried it on my tablet I had laying around, and eventually got it to charge using a different cable. No problem, stuff like that happens. Noticed it was "charging slowly" Hmm..wonder if the USB charger is going back. Tried it other places, but always getting EXTREMELY slow charges. Unfortunately I had my OEM charger at work at my desk so I couldn't try that but I have a QuickCharge 2.0 car charger that I tried. I plugged it in there and I was actually LOSING charge at what seems like a faster rate than just a normal drain. WTF!?
Got to my destination (going to my buddy's house) and tried a few of his chargers; same thing, "charging slowly". Made it through the weekend, got home and the problem is still going on with all my chargers.
So today, I get to work to try my OEM quickcharge and it drains my battery as well! Oh boy. This is bad.
Anyone else experience this? Since I've unlocked bootloader and no extended warranty AND the fact that Moto Support is god awful anyway, I'm screwed when it comes to professional help. Anyone have luck opening up this beast and fixing anything? Any help or guidance would be very much appreciated.
My phone isn't charging very well either. I went out to do some errands and phone was on 84% saying it'll be charged in 35 minutes I came home three hours later it's still on 84% with 35 minutes to go and burning up to touch. This is already my fourth Moto X in the week.
xBkKx said:
My phone isn't charging very well either. I went out to do some errands and phone was on 84% saying it'll be charged in 35 minutes I came home three hours later it's still on 84% with 35 minutes to go and burning up to touch. This is already my fourth Moto X in the week.
Click to expand...
Click to collapse
Fourth with issues? Hope it's not related to the same charger.
Sent from my XT1575 using Tapatalk
dottat said:
Fourth with issues? Hope it's not related to the same charger.
Sent from my XT1575 using Tapatalk
Click to expand...
Click to collapse
Not the same charger but all four different chargers the phone comes with. I ordered it on Amazon with next day arrival and the first two phones had dead pixels third one was reading 138 degrees with ampere while charging and would stop and fourth (current) refuses to charge past 84% unless I have the phone off I noticed. I unlocked the bootloader on this current one though so I don't think I'll be able to exchange it now
sreister said:
Hello,
First off I want to preface this by saying I have my bootloader unlocked, rooted, running a 6.0.1 ROM.
This past weekend I noticed that my phone wasn't charging on a generic 4 port USB charger that I have. Made sure it had power, tried it on my tablet I had laying around, and eventually got it to charge using a different cable. No problem, stuff like that happens. Noticed it was "charging slowly" Hmm..wonder if the USB charger is going back. Tried it other places, but always getting EXTREMELY slow charges. Unfortunately I had my OEM charger at work at my desk so I couldn't try that but I have a QuickCharge 2.0 car charger that I tried. I plugged it in there and I was actually LOSING charge at what seems like a faster rate than just a normal drain. WTF!?
Got to my destination (going to my buddy's house) and tried a few of his chargers; same thing, "charging slowly". Made it through the weekend, got home and the problem is still going on with all my chargers.
So today, I get to work to try my OEM quickcharge and it drains my battery as well! Oh boy. This is bad.
Anyone else experience this? Since I've unlocked bootloader and no extended warranty AND the fact that Moto Support is god awful anyway, I'm screwed when it comes to professional help. Anyone have luck opening up this beast and fixing anything? Any help or guidance would be very much appreciated.
Click to expand...
Click to collapse
Question to OP: DId you ever find a resolution? I have recently noticed that my XT1575 (currently restored to stock 6.0 but still unlocked) actually LOSES charge while "charging" (as reported in Battery setting) in my Car (12vDC) and on my motorcycle (12vDC). Granted, I am running GMaps and streaming music running, among other apps... In fact, I just saw the charge drop from 74% to 68% in about 15 mins while driving this morning... On the other hand, when plugged into AC Turbo charger, I can run all those apps and then some, and charging, the battery charge goes up 1-2% per minute... Wondering if anyone else has seen similar issue when charging via DC current?
ech1253 said:
Question to OP: DId you ever find a resolution? I have recently noticed that my XT1575 (currently restored to stock 6.0 but still unlocked) actually LOSES charge while "charging" (as reported in Battery setting) in my Car (12vDC) and on my motorcycle (12vDC). Granted, I am running GMaps and streaming music running, among other apps... In fact, I just saw the charge drop from 74% to 68% in about 15 mins while driving this morning... On the other hand, when plugged into AC Turbo charger, I can run all those apps and then some, and charging, the battery charge goes up 1-2% per minute... Wondering if anyone else has seen similar issue when charging via DC current?
Click to expand...
Click to collapse
now that I think about it, its DC going into the phone regardless of the source, so the type current is not a factor... so assuming I don't have bad cables, what could be causing the difference?
Sent from my XT1575 using XDA-Developers mobile app
---------- Post added at 08:48 PM ---------- Previous post was at 08:14 PM ----------
Upon further research I just discovered and ordered a Qualcomm Quick Charge 2.0 capable car adapter... I'll bet the "standard" usb power the phone can draw from a cheap car adapter isn't sufficient to effectively charge on top of streaming, GPS mapping, Bluetooth stereo and screen on... Lets,see what the new 2.0 QC adapter can do next week....
Sent from my XT1575 using XDA-Developers mobile app
I've noticed issues with the charging port. I have two brand new 25w turbo chargers and neither of them connect/charge my phone. I got an OEM USB cable and connected it to my old Droid Turbo charger and that is the only charger that works for me. Bummer. Was considering sending back the phone to moto, but I'm unlocked and have a feeling they would not repair/research it...
Sent from my XT1575 using XDA-Developers mobile app
You can download an app called "Ampere" it will actually show you the charge and discharge rate that the phone is doing. Might help out in determining what is wrong.
For those experiencing issues with the device not charging to 100% when it is extremely hot, this is normal behavior. This is from Motorola...
Some facts on battery temperature
* Devices need their space; There are no on-board fans, cooling relies solely on the device being able to dissipate heat through the air. To help cooling, ensure the device is not in a pocket, purse, carrying case, or direct sunlight.
* Normal temperature is (97f) ~36c
* A user will begin to sense a “warm” device at 106f (~41c) and it will seem hot at 109f (~43c)
* Cool Down Mode kicks in at 152f (67c)
* Batteries with temps => 113f to 140f (45c to 60c) will not charge to 100% capacity
* Battery temps >140f (60c)will not charge at all
Click to expand...
Click to collapse
i heard the battery get totally broken after one year of using the original 25W charger , what is ur experiences ? does ur phone over heat too when charging does it get to 50-60 C degrees?
I've been charging mine with the turbo charger since day one, it's been fine. There is technology built in to monitor the battery temps and ramp down the charge speed as the battery gets full. I've had my phone for 16 months now.
Max temp I get is 42-44c
Sent from my XT1580 Hammer using Tapatalk
same here : 15 months with my MXF the 25w turbo2 charger.
Battery never go over 45° in charge, battery life still as good as the first day
In my car I have the Moto 25w charger. With navigation and other apps running the temperature rises to about 46 degrees. At this point the charge rate drops. Only if my telephone is at the cool air and out of its cover does the charging rate remain at the full turbo charge rate
Sent from my XT1580 Hammer using Tapatalk
Alimataei said:
i heard the battery get totally broken after one year of using the original 25W charger , what is ur experiences ? does ur phone over heat too when charging does it get to 50-60 C degrees?
Click to expand...
Click to collapse
Not so much that the battery fails. The connector (which is kind of crucial for QC 2.0/3.0) or the charge controller craps out. Battery's fine. Was fine when I did my swap out for charge failure. It's not the battery, which people incorrectly presume is the problem- the charge system is a feedback loop process running in the background while the OS is running. When you're dead, down, no charge in the battery, the device only draws USB 2.0 power levels, 500mA, until the OS can come up enough to manage the charging. Part of the reason they do this is because you're using a USB connection to charge with and unless you've got the 1.5 A USB charge slot or an AC charger with the ability to source up to 2.4 A of juice, trying to pull that much current will wipe your USB port on a PC/Laptop/etc OUT. This is just with traditional charging. Turbo/QuickCharge charging is about raising the voltages over the USB 2.0 lines on a cable to up to 12v as opposed to 5, to allow you to jam a bit more current through the lines and to the device, effectively doubling the power being fed to the charge system. Problem with that is that you REALLY need the OS up and running to manage that. It requires info from the Charge Controller chip that is handshook from the charger.
If your charge controller is damaged, or if the cable doesn't have clean data and power lines, it just simply WON'T WORK. It will just USB mode charge until you fix the "problem"- either of which requires Lenovo to re-work the board...if it's even possible to fix. USB charging takes forever with this class of device- because the battery is a huge tank of juice compared to the devices of old. So it "looks" like the battery got "broke".
Having said this, there's about 20-40% of the units out there, depending on the crowd you listen to, that have a defective charge controller system and the phone flat-out won't ever go into any mode other than USB.
To power up, you consume Red Bull. But your phone just needs its adaptive fast charger. Rate this thread to express how quickly the Xiaomi Redmi Note 5 Pro can charge. A higher rating indicates that it charges extremely fast.
Then, drop a comment if you have anything to add!
2 Hour With Stock Charger
I didn't completely check the ratings and time but stock charger DOES NOT fast charge this phone. as the Stock Charger isnt QC2.0 Supported. However this mobile does support QC2.0 but you'll have to test QC2.0 Charger 1st. Not all QC2.0 Chargers work on this mobile. Its a little picky. So go to a shop check QC2.0 Chargers on your mobile. when you get circle Sign on notification bar along side battery then it means that device is fast charging. if not then there will be no circle around the charging sign (Flash sign)
also idt this mobile supports QC3.0 but i dont have tools to check amps volts of charger.
Lenovo's original QC3.0 charger doesnt work on this phone. I've tested. but Motorola's QC3.0 Charger works fine.
my rn5 pro , takes apporx 3 hours to charge completely!
So far I'm a bit slow, a little bit more than 3 hours to completely charge the phone. Might have something to do with the cable.
My current charging setup:
- ANKER 5 port 40W
- a docomo USB cable
Planning to buy a proper 20AWG usb cable and a QC2.0 adapter.
I just bought a Letv charger which supported qc3.0 for about 4$ on taobao
I'm currently on the 9.5.11 build and it takes about 4-5 hours to completely charge the device using stock charger, And it took about 2-3 hours while on 9.2 build.
I wonder if the Mi QC 3.0 based charger would improve the situation for us?
piyush95 said:
I'm currently on the 9.5.11 build and it takes about 4-5 hours to completely charge the device using stock charger, And it took about 2-3 hours while on 9.2 build.
I wonder if the Mi QC 3.0 based charger would improve the situation for us?
Click to expand...
Click to collapse
Slow charge is a known bug in 9.5.11 build. Wait for an update or change ROM
13,2W for me
I recieved 9.2.13 update yesterday and have been noticing significant boost to charging speeds since then...yet to fully charge from 0 so can't comment on total time but as per Ampere, charging speeds are in range of 1500 to 1700 mah
1000 mA max with 5v 2amp and Work Normal Speed with Stock Charger
Approximately 2 hour for charge phone
I use the app Ampere (free in Playstore) to measure power input and with a normal charger (non QC) it shows up to 1600 mAh charging amount and from almost 0 to 100% it is taking 2,5 hours. One question: is there a way to tell if QuickCharge is active?
@Kusie
Look on your"s phone status bar. With normal charging there is thunder icon next to the battery. With QC active, thunder in in circle as far as I remember. Info about active QC should be also displayed in the bottom of your lockscreen
Sent from my flo using XDA Labs
Using my usb inline meter, i'm getting ~6.5v and ~2.2A, with a Tronsmart usb cable and QC 3.0 Truro charger, screen off and about 44% remaining on battery. Will try when the battery is lower some other time.
takes around 2hours to charge 100% using stock charger..
1h 30min with a Quick Charger from Anker.
Cel00 said:
1h 30min with a Quick Charger from Anker.
Click to expand...
Click to collapse
Not possible.
Incogn said:
Not possible.
Click to expand...
Click to collapse
Of Course it's true, why should I lie?
Turned off the Phone at 5% and charged it to 100%....
Cel00 said:
Of Course it's true, why should I lie?
Turned off the Phone at 5% and charged it to 100%....
Click to expand...
Click to collapse
I have no idea why would you do that... But read reviews, no matter what kind of charger you use, this phone only supports qc 2.0 version. From 0 to 100, in 1 hour, you only get like 55%, and in the end it slows down even more, so yes, impossible to fully charge in 1.5h, TECHNICALLY IMPOSSIBLE. You are either lying, or mixed times and got confused. Judging by technical parameters, the best this phone can do should be around 2hours from 0 to 100.
Incogn said:
I have no idea why would you do that... But read reviews, no matter what kind of charger you use, this phone only supports qc 2.0 version. From 0 to 100, in 1 hour, you only get like 55%, and in the end it slows down even more, so yes, impossible to fully charge in 1.5h, TECHNICALLY IMPOSSIBLE. You are either lying, or mixed times and got confused. Judging by technical parameters, the best this phone can do should be around 2hours from 0 to 100.
Click to expand...
Click to collapse
I just posted above that I was able to get QC 3.0 charging rates. Approximately 2.2A (fluctuates +/- 0.1A) and 6.6v (fluctuates +/- 0.2v) using a QC 3.0 charger and Tronsmart cable. Measured using an inline meter, not software.
*Deleted*
They didn't disable anything - it doesn't have the Qualicom Quick Charge variant, but it does have it's own variant of a rapid charge.
Using two wall chargers I have here and a Benson certified USB-C Cable, one of the wall chargers support QC2.0 and the other QC3.0. Both charged "normally" reporting on the screen as "Charging".
Using the stock USB-C wall charger that came with my 6P, using EX Kernel and the stock kernel from January 8.1 stock ROM, both reported "Charging Rapidly". I switched kernels using EXKM and a backup of the stock Kernel to test this.
Also, I bought a Tronsmart USB-C Car Charger, and it too reports "Charging Rapidly".
ZuneYT said:
Hey everyone,
So I got my nexus 3 Months ago, I just found out NOW that it is not fast charging at all. I bought a new ANKER charger and wire with it and its just charging slowly which got me really annoyed as I wasted money on it because I thought it had nothing to do with the phone at all. I did some digging around and the maker of franco kernel found out that bloody google disabled the bloody fast charging on the 6P?! What kind of solution is that? I mean they could of at least gave us options on whether to disable or enable it in the phone. Is there ANY way to get fast charging enabled on this phone?
Click to expand...
Click to collapse
Nexus 6p just charges at a higher amperage then most average phones. As long as you use a charger with 5V/3A you should get charging rapidly. Just remember as the battery percentage increases the amps get lower. Use an app like ampere to make sure your getting close to 3000mA. I think the highest charge I seen on the stock plug was like 2800mA.
Well I bought an ANKER Charger and usb cable with it which definitely says it is fast charging compatible. When it comes to charging my phone I got a small text on my lock screen showing me how much charge there is going to the phone while charging. The average charging mAh is 1,400 and the voltage is 4.3V. I am pretty sure that it has reached a higher charge rate....I'll have to keep an eye on it. Do you think thats an acceptable charging rate?
It's not just about amperage, because some of their chargers are a whopping 8A - https://www.anker.com/ca/products/108/203/Wall-Chargers
Anker doesn't support the variant of rapid charging that the 6P accepts, therefore it only will negotiate down to a normal "charging" rate, which IIRC is exactly what you're getting.
ZuneYT said:
Well I bought an ANKER Charger and usb cable with it which definitely says it is fast charging compatible. When it comes to charging my phone I got a small text on my lock screen showing me how much charge there is going to the phone while charging. The average charging mAh is 1,400 and the voltage is 4.3V. I am pretty sure that it has reached a higher charge rate....I'll have to keep an eye on it. Do you think thats an acceptable charging rate?
Click to expand...
Click to collapse
That's kind of low this one from the comments works. Sorry it's Canadian amazon but maybe can find in your are.
Exodusche said:
That's kind of low this one from the comments works. Sorry it's Canadian amazon but maybe can find in your are.
Click to expand...
Click to collapse
Well good news I found the plug from my past orders I just forgotten to look on my account haha.
This is it here https://www.amazon.co.uk/gp/product/B017VXARME/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
ZuneYT said:
Well good news I found the plug from my past orders I just forgotten to look on my account haha.
This is it here https://www.amazon.co.uk/gp/product/B017VXARME/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Noice yeah Amazon is good that way!! ?
I'm having this problem too. I used to be able to rapid charge using anker usb c to usb c but now it just seems to charge normally not rapid charge.
Anyone know of a fix, let me know.
Thanks