Morning,
i have an Samsung galaxy s7 edge with a broken display (i don't see anything on it, but the phone is on).
I need to recover data, but it's android marshmallow... and when i connect to pc it connect in charge mode.
I don't see anything in the phone and i can't change mode to mtp.
There is a way to connect the phone to pc to recover photos and videos from the phone?
thanks for your help
Had you turned on developer settings?
You can connect a monitor to your phone. If you have a PC monitor (or even a TV should work), you just need an adapter from micro USB to VGA/DVI/HDMI (depending of the monitor). Plug the monitor on your phone using the adapter and use what will be diplayed on this monitor to recover your data
An adapter like that would cost you 5-10€
Related
Anyone-Please try to help me with these issues:
1. When the unit is in STBY (no screen output) and i connect any USB cable the PDA "wakes-up" and if connected to a PC will start doing a Sync, is there anyway to stop the "wake-up" when connecting a USB cable (-or installing Mini-SD card).......all i want to do is charge the unit while it's in STBY mode. In my old Mio 168RS this could be done in Settings. Maybe someone has a small application that can do this?
2. Sometimes when i innitiate Active Sync i get this Error "To Sync this device you must install ActiveSync 4.0 or higher on your Desktop computer"....but actually i'm running ActiveSync 4.5 already on my PC!!??
Then i need to remove the ActiveSync from my PC and re-install it again until the next time.
Not in stb mode you can switch off the 3600 it still charging etc. only it is off
I don't know if this could help because I never tried it. However, I tried to disable the usb connection from Active Sync for other purposes. In Active Sync program, you can actuallly choose to turn off the usb detection (which can be turned back on anytime). That way, Active Sync will not automatically update your device, hence, turning your device on. In that case, you can just plug in your device for charging purpose.
Thanks for your inputs but this is not what i'm looking for.
In my old Mio168RS there was the possibility in "Settings" that the unit did not come out of STBY mode when connecting to a USB input or when inserting an external SD card.
By the way turning the unit "OFF" will also turn off the phone!!
One additional question that someone might be able to help is if there any way to increase the Speaker Phone volume above and beyond what can be done within the settings.???
I have some data inside my Secure Folder and in my regular storage in my S8+, but the screen is busted. (The LCD and digitizer don't work now) Any way to get access into my phone? Connecting it to HDMI shows my phone onto a monitor, but since the digitizer is broken I can't even do that. Unfortunately the USB Debugging was not enabled, and SideSync has not been used on the phone. I have to send it to Samsung for repairs soon, if anyone knows any way...please help!
Buy a dex dock and return it when you saved your data ?
Use the otg adapter that came in the box n hook it to a bluetooth keyboard
Hi, guys!
My dad has a Blade A610 and he wants to transfer his pics onto his laptop (Win10). The problem is, when I connect the phone via USB, it's charging, but the laptop doesn't recognize it as a storage. Also the phone doesn't make any moves in terms of notification or open up a menu, where I can choose how I want to use the connection right now.
When I connect my Sony Z3C via the same cable, everything works.
Does anyone else have this problem or more importantly: a solution?
Hello,
I have a Galaxy S4 i9505 which boots up normaly but the screen is not starting at all. It felt down to the floor, and the screen is not starting.
I can here all sounds during boot up and if I press the Main button, I can see that back and menu buttons get litghed. Also can receive calls, etc... so it works fine.
At this point, I am not sure if touch screen is also damaged or not...
1. My first attempt was to use Kies. It detects the phone perfectly but it says I have to change connection to MTP. No way to do it as I cannot see anything on the screen.
2. Second attemp. I have bougth a microusb HUB to connect a HDMI cable to my TV and also a mouse, but my tv is not detecting any signal in the HDMI port. (usb powered as well).
3. USB debugging is not activated in the phone, so I think I cannot retrieve any data by using ADB.
I could copy all pictures to my pc, as when I connect the phone to my laptop, it detects multimedia files and I could copy.
Contacts are not sync with Google but stored in the phone, so is there any way to get all contacts somehow?
I hope you can help me.
Thanks
Javier
Without replacing the screen, there's no way I know of to get the contact information off the device, given that you already tried casting the screen to your television.
Hello,
yesterday my tablet fell off to the ground. The display is black now, but the tablet still running.
It's still connected to my Wi-Fi and when I plug in the USB the PC finds it as well.
Now my question, what can I do to recover my data (bring it into transfer mode) or even better, how to connect it to a display?
I have Google Chromecast here, but I don't know how to connect it without seeing anything on the screen.
Can anyone help me out and give some ideas?
Big thanks!