Related
THE LENOVO IDEATAB A3000-H 16GB ZIP FILE TO BE EASILY INSTALL ON RECOVERY MODE "UPDATE FROM SD CARD". WHICH IS I HAVE SEEN ON AZAM'S POST , WHICH IS "ONLY" "RAR" FILE NOT ZIP FILE , THEY MAKE PEOPLE HARDER TO INSTALL AND DO THE HARDEST WAY. WE NEED A STOCK ROM ZIP FILE TO FIX SOME PROBLEMS:
1.) CAN IT ALSO BE USE ON BOOT LOOP OF LENOVO A3000-H ?
2.)CAN WORK ON A CHANGED BUILD.PROP AND A CHANGED DEVICE MODEL OR DEVICE NAME ON BUILD.PROP?
3.)WHY PEOPLE ALWAYS PUT ON FLASH TOOLS WHERE YOU CAN . DOWNLOAD DIRECTLY , PUT ON SD CARD, AND RECOVERY MODE, THEN UPDATE FROM SD CARD , THEN INTSALL? IS THAT HARD?
[PS] I KNOW ITS NONSENSE BUT I NEED A ZIP FILE ON LENOVO A3000 STOCK ROM TO EASILY INSTALL IT AND I NEED IT BECAUSE MY LENOVO A3000 GOT BOOTLOOP AFTER CHANGING BUILD.PROP AND DEVICE MODEL NAME. MY LENOVO IDEATAB A3000-H 16GB HAVEN'T BEEN USDB DEBUGGING SO I CAN'T USE SP FLASH TOOLS , BUT THE ONLY WAY TO IT WAS TO CHANGE THE ROM LIKE A FRESH NEW SYSTEM. THANK YOU SOO MUCHH!!!!!! AND MAY GOD BLESS ON YOUR PROFFESION!!!! http://cdn3.xda-developers.com/images/smilies/frown.gif
BTW ITS BEEN A MONTH MY TABLET GOT THIS PROBLEM AND I'M CRYING EVERY DAY
Regicidez said:
THE LENOVO IDEATAB A3000-H 16GB ZIP FILE TO BE EASILY INSTALL ON RECOVERY MODE "UPDATE FROM SD CARD". WHICH IS I HAVE SEEN ON AZAM'S POST , WHICH IS "ONLY" "RAR" FILE NOT ZIP FILE , THEY MAKE PEOPLE HARDER TO INSTALL AND DO THE HARDEST WAY. WE NEED A STOCK ROM ZIP FILE TO FIX SOME PROBLEMS:
1.) CAN IT ALSO BE USE ON BOOT LOOP OF LENOVO A3000-H ?
2.)CAN WORK ON A CHANGED BUILD.PROP AND A CHANGED DEVICE MODEL OR DEVICE NAME ON BUILD.PROP?
3.)WHY PEOPLE ALWAYS PUT ON FLASH TOOLS WHERE YOU CAN . DOWNLOAD DIRECTLY , PUT ON SD CARD, AND RECOVERY MODE, THEN UPDATE FROM SD CARD , THEN INTSALL? IS THAT HARD?
[PS] I KNOW ITS NONSENSE BUT I NEED A ZIP FILE ON LENOVO A3000 STOCK ROM TO EASILY INSTALL IT AND I NEED IT BECAUSE MY LENOVO A3000 GOT BOOTLOOP AFTER CHANGING BUILD.PROP AND DEVICE MODEL NAME. MY LENOVO IDEATAB A3000-H 16GB HAVEN'T BEEN USDB DEBUGGING SO I CAN'T USE SP FLASH TOOLS , BUT THE ONLY WAY TO IT WAS TO CHANGE THE ROM LIKE A FRESH NEW SYSTEM. THANK YOU SOO MUCHH!!!!!! AND MAY GOD BLESS ON YOUR PROFFESION!!!! http://cdn3.xda-developers.com/images/smilies/frown.gif
BTW ITS BEEN A MONTH MY TABLET GOT THIS PROBLEM AND I'M CRYING EVERY DAY
Click to expand...
Click to collapse
You install rom with SP Flash Tool, extract Zip and load scatter file in, and make sure tick FAC, and give it right path. Then just click Firmware upgrade, wait till it finished, then unplug tablet then plug back in, and it should start flashing rom, make sure tablet is turned off to be in Preloader mode,
wigankev said:
you install rom with sp flash tool, extract zip and load scatter file in, and make sure tick fac, and give it right path. Then just click firmware upgrade, wait till it finished, then unplug tablet then plug back in, and it should start flashing rom, make sure tablet is turned off to be in preloader mode,
Click to expand...
Click to collapse
thank you for the information but i am asking if you have a direct zip file to just "install directly via recovery mode/ install zip from sd card then succesfly change the rom of the tablet" because its the easiest way "i" think to fix the bootloop that i change the device model in my lenovo a3000 build.prop then got into bootloop, that's why i need a direct zip file to install it directly and easily. Thank you
Regicidez said:
thank you for the information but i am asking if you have a direct zip file to just "install directly via recovery mode/ install zip from sd card then succesfly change the rom of the tablet" because its the easiest way "i" think to fix the bootloop that i change the device model in my lenovo a3000 build.prop then got into bootloop, that's why i need a direct zip file to install it directly and easily. Thank you
Click to expand...
Click to collapse
Extract it and use Winrar to zip it?
wigankev said:
extract it and use winrar to zip it?
Click to expand...
Click to collapse
are asking me sir? Or is it really a solution?
Please i need help on my tab , i already go to some tablet specialist in the mall and they said the y have experience fixing lenovo kinds of tablet but they said its really hard to get the firmware . Please i need help online now!! please i need help much appreciated to these two :
Azam
oliver
Regicidez said:
are asking me sir? Or is it really a solution?
Please i need help on my tab , i already go to some tablet specialist in the mall and they said the y have experience fixing lenovo kinds of tablet but they said its really hard to get the firmware . Please i need help online now!! please i need help much appreciated to these two :
Azam
oliver
Click to expand...
Click to collapse
If you have a bricked tablet, just flash firmware from Azam thread. Just extract rar file and load scatter file from in target_bin folder in SP Flash tools, then tick FAC and make sure it is headed to the right path. Then just click Firmware upgrade, once it has finished validating the files, simply unplug the tablet and plug back in, and the bar at the bottom of SP flash tools will turn red, then it will start flashing new rom/firmware onto your tablet, Once completed it will come up with a green circle saying completed. Tablet must be turned off to access Preloader mode.
wigankev said:
If you have a bricked tablet, just flash firmware from Azam thread. Just extract rar file and load scatter file from in target_bin folder in SP Flash tools, then tick FAC and make sure it is headed to the right path. Then just click Firmware upgrade, once it has finished validating the files, simply unplug the tablet and plug back in, and the bar at the bottom of SP flash tools will turn red, then it will start flashing new rom/firmware onto your tablet, Once completed it will come up with a green circle saying completed. Tablet must be turned off to access Preloader mode.
Click to expand...
Click to collapse
yes I tried it AZAM'S technique but my laptop does not show up an MT65x that will show up in DEVICE MANAGER , it just show CDS SERIAL which I dont know how. ONE LAST THING ABOUT CONNECTING THE TABLET BEFORE DOWNLOAD IN SP FLASH TOOL? WHAT MODE IS THAT? RECOVERY MODE? BOOTLOADER MODE? THEN AFTER DOWNLOADING, PLUG THE DEVICE USING BOOTLOADER MODE RIGHT?
Regicidez said:
yes I tried it AZAM'S technique but my laptop does not show up an MT65x that will show up in DEVICE MANAGER , it just show CDS SERIAL which I dont know how. ONE LAST THING ABOUT CONNECTING THE TABLET BEFORE DOWNLOAD IN SP FLASH TOOL? WHAT MODE IS THAT? RECOVERY MODE? BOOTLOADER MODE? THEN AFTER DOWNLOADING, PLUG THE DEVICE USING BOOTLOADER MODE RIGHT?
Click to expand...
Click to collapse
http://www.mediafire.com/download/fn1ozc9174b71db/IdeaPadA3000_extended_Driver.rar use these drivers, and think it's preloader mode? Once you plug in USB once tablet is switched off then it goes into preloader mode.
wigankev said:
http://www.mediafire.com/download/fn1ozc9174b71db/IdeaPadA3000_extended_Driver.rar use these drivers, and think it's preloader mode? Once you plug in USB once tablet is switched off then it goes into preloader mode.
Click to expand...
Click to collapse
I ALREADY GOT THE DRIVERS WHAT I DONT KNOW IS THAT WHEN I PUT ON PRELOADER MODE , THEN CONNECT TO COMPUTER VIA USB CABLE , THEN GO TO DEVICE MANAGER TO UPDATE THE MT65Xx DRIVER USING THE EXTENDED DRIVER I DOWNLOADED , BUT I CAN'T SEE A MT65Xx it just shows CDS SERIAL AND ON ANDROID PHONE ON DEVICE MANAGER IT JUST SHOW >ANDROID PHONE> ANDROID ADB INTERFACE> THEN AT THE UKNOWN DEVICE IT JUST SHOW ( CDS SERIAL>UNKNOWN DEVICE> UNKOWN DEVICE) THEN WHERE IS MT65XX ??? WHAT DRIVER WILL I UPDATE???? :3
wigankev said:
http://www.mediafire.com/download/fn1ozc9174b71db/IdeaPadA3000_extended_Driver.rar use these drivers, and think it's preloader mode? Once you plug in USB once tablet is switched off then it goes into preloader mode.
Click to expand...
Click to collapse
OH BTW AFTER MT65Xx it I CAN NOT UPDATE DRIVER, it just stay there AFTER AWHILE , IT POPS AS ANDROID PHONE>ALCATEL ANDROID ADB INTERFACE ? WHAT THE HELL IS THIS , WHY CAN'T MY LAPTOP JUST FOLLOW OTHER PEOPLE WHEN THEY TRY TO FIX ??? >.< PLEASE HELP I NEED HELP AND THE ONLY UKNOWN DEVICE LEFT IS JUST CDS SERIAL AND WHAT THE HELL IS THIS??? PLEASE I REALLY NEED SOMEONE TO TOE ON TOE ABOUT THIS PROBLEM
Hi,
Follow these steps from this thread:
http://forum.xda-developers.com/showthread.php?t=2206421
You need to download the MTK drivers.
We have the same problem. I'm still fixing it though. I would say its difficult to solve this tablet problem.
Do the SP Flash tool and research too. It really helps.
Please how can I recover my Lenovo tab firmware through sd card?
good day..regards from malaysia
hello there..
i own a ZTE Blade QLux.
reading on some onlines tutorials, i made a stupid move. i did a format (auto format flash - format whole flash except bootloader). the sp tool said succees.
then, my phone dead, even the red charging light not working. cannot turn on, cnt enter recovery..just DEAD.
to make the senario worst, now my windows not detecting the phone (UNKNOWN DEVICE)
did googled for solution, but cnt find any..what can i do now.thanks in advance
running on:
windows 7 pro
media tek sp flash tools v5.1452.0
kavinraj88 said:
good day..regards from malaysia
hello there..
i own a ZTE Blade QLux.
reading on some onlines tutorials, i made a stupid move. i did a format (auto format flash - format whole flash except bootloader). the sp tool said succees.
then, my phone dead, even the red charging light not working. cannot turn on, cnt enter recovery..just DEAD.
to make the senario worst, now my windows not detecting the phone (UNKNOWN DEVICE)
did googled for solution, but cnt find any..what can i do now.thanks in advance
running on:
windows 7 pro
media tek sp flash tools v5.1452.0
Click to expand...
Click to collapse
give me on PM a Email adres were i can send you a files package for spflashtool to restore your phone
vaserbanix said:
give me on PM a Email adres were i can send you a files package for spflashtool to restore your phone
Click to expand...
Click to collapse
done.thanks mate
problem still persists
havent find the solution yet...
or mayb anyone out there can send me the files to flash my device....or....any other solution?
Found The Solution
After hours spending to find the solution, finally i did it..
for those who having the same prob, here is the solution...
ONLY FOR ZTE BLADE Qlux 4G...........DO NOT TRY THIS ON 3G VERSION...U WILL NEED 3G VERSION FOR THAT....
sorry, i just found solution on russian firmware....but u can still change the language during setup..
download link for needed files:
https://cloud.mail.ru/public/gDXB/eVfZmaF2N
What is required for the process (included in the link above, just download that):
1.1USB VCOM driver. (18.8mb)
2.The original (not custom) firmware. (1.05gb)
3.SP Flash Tool (57.2mb)
4. Bricked ZTE Blade Q Lux 4G
Instructions:
1. Install the USB VCOM driver.
2. Start Flash Tool Administrator (Flash_tool.exe in the program folder).
3. In the window that opens, click the Scatter-loading (on the right side of the program).
4. In the folder with the firmware, select the file MT6752_Android_scatter.
5. Make sure that the Flash Tool automatically put down the boxes next to all the firmware files. (Picture attached for manual upolad &reference)
6. Click the Download button in the Flash Tool.
7. Turn off your phone, then remove and reinsert the battery. (In our case, its already off, so u can skip this step)
8. Connect your phone to the PC and wait for the flashing process. (around 26 minutes, grab some coffee)
9. When Flash Tool window appears green circle, unplug usb cable, turn on the phone.
10. Enjoy your ZTE BLADE Q LUX 4G
pls let me know is if u need my help..
have a nice day...
ps: moderator, u can mark this post as SOLVED...Thanks..
internel space issues
kavinraj88 said:
After hours spending to find the solution, finally i did it..
for those who having the same prob, here is the solution...
ONLY FOR ZTE BLADE Qlux 4G...........DO NOT TRY THIS ON 3G VERSION...U WILL NEED 3G VERSION FOR THAT....
sorry, i just found solution on russian firmware....but u can still change the language during setup..
download link for needed files:
https://cloud.mail.ru/public/gDXB/eVfZmaF2N
What is required for the process (included in the link above, just download that):
1.1USB VCOM driver. (18.8mb)
2.The original (not custom) firmware. (1.05gb)
3.SP Flash Tool (57.2mb)
4. Bricked ZTE Blade Q Lux 4G
Instructions:
1. Install the USB VCOM driver.
2. Start Flash Tool Administrator (Flash_tool.exe in the program folder).
3. In the window that opens, click the Scatter-loading (on the right side of the program).
4. In the folder with the firmware, select the file MT6752_Android_scatter.
5. Make sure that the Flash Tool automatically put down the boxes next to all the firmware files. (Picture attached for manual upolad &reference)
6. Click the Download button in the Flash Tool.
7. Turn off your phone, then remove and reinsert the battery. (In our case, its already off, so u can skip this step)
8. Connect your phone to the PC and wait for the flashing process. (around 26 minutes, grab some coffee)
9. When Flash Tool window appears green circle, unplug usb cable, turn on the phone.
10. Enjoy your ZTE BLADE Q LUX 4G
pls let me know is if u need my help..
have a nice day...
ps: moderator, u can mark this post as SOLVED...Thanks..
Click to expand...
Click to collapse
hi kavinraj88...thank for this stock rom but I have issues with intrnel storage running out...before I flash this stock rom I only have 2 storage that mean internel storage n sd card...but after flash this rom I have 3 storage, internel, phone storage n sd card...all my apps can't move to sd card its install to internet storage that only have 1gb...what can I do to solve this problem?
apih46 said:
hi kavinraj88...thank for this stock rom but I have issues with intrnel storage running out...before I flash this stock rom I only have 2 storage that mean internel storage n sd card...but after flash this rom I have 3 storage, internel, phone storage n sd card...all my apps can't move to sd card its install to internet storage that only have 1gb...what can I do to solve this problem?
Click to expand...
Click to collapse
yeah..im too having 1gb plus internal memory..but im onlu having 2 storage option
1. internal / phone starage
2. external/sd card.
i cant help u in this issue..i just able to give live to the phone..mayb this march i will do some research on that since im quite buzy right now..any progress i will let u know..
kavinraj88 said:
good day..regards from malaysia
hello there..
i own a ZTE Blade QLux.
reading on some onlines tutorials, i made a stupid move. i did a format (auto format flash - format whole flash except bootloader). the sp tool said succees.
then, my phone dead, even the red charging light not working. cannot turn on, cnt enter recovery..just DEAD.
to make the senario worst, now my windows not detecting the phone (UNKNOWN DEVICE)
did googled for solution, but cnt find any..what can i do now.thanks in advance
running on:
windows 7 pro
media tek sp flash tools v5.1452.0
Click to expand...
Click to collapse
Able to root this qlux 4g ?
Yes...pls use iroot
kavinraj88 said:
Yes...pls use iroot
Click to expand...
Click to collapse
Did you flash any ROM.?
yes..now im running on lewa os.. u can find it in the same link given at the top of the post..hope it helps..
kavinraj88 said:
yes..now im running on lewa os.. u can find it in the same link given at the top of the post..hope it helps..
Click to expand...
Click to collapse
Send me custom recovery. I am not able to flash custom recovery. Don't know what to do. Then i found this thread.
Preshak said:
Send me custom recovery. I am not able to flash custom recovery. Don't know what to do. Then i found this thread.
Click to expand...
Click to collapse
i cannot upload here..file size exceeded..
pls download form here
https://drive.google.com/file/d/0B4LLhssSYZcjY01YbVltWFV1dW8/view?usp=sharing
1. im using SP_Flash_Tool_exe_Windows_v5.1452.00.000
2. scatter file n super su included..
hope it helps..
kavinraj88 said:
i cannot upload here..file size exceeded..
pls download form here
https://drive.google.com/file/d/0B4LLhssSYZcjY01YbVltWFV1dW8/view?usp=sharing
1. im using SP_Flash_Tool_exe_Windows_v5.1452.00.000
2. scatter file n super su included..
hope it helps..
Click to expand...
Click to collapse
Recovery from pdanet worked. But sdcard0 is not detecting.
Anyways thanks for taking your time to upload file.
Have you tired xposed installer ?
Do you mind showing me some screenshot.
Any tips on how to connect the phone to PC?
My PC just doesn't want to recognize my phone
Tried several ZTE drivers but they all didn't work
custom rom for zte blade qlux 4g
please upload a custom rom for this model to make the mobile faster.
kavinraj88 said:
After hours spending to find the solution, finally i did it..
for those who having the same prob, here is the solution...
ONLY FOR ZTE BLADE Qlux 4G...........DO NOT TRY THIS ON 3G VERSION...U WILL NEED 3G VERSION FOR THAT....
sorry, i just found solution on russian firmware....but u can still change the language during setup..
download link for needed files:
https://cloud.mail.ru/public/gDXB/eVfZmaF2N
What is required for the process (included in the link above, just download that):
1.1USB VCOM driver. (18.8mb)
2.The original (not custom) firmware. (1.05gb)
3.SP Flash Tool (57.2mb)
4. Bricked ZTE Blade Q Lux 4G
Instructions:
1. Install the USB VCOM driver.
2. Start Flash Tool Administrator (Flash_tool.exe in the program folder).
3. In the window that opens, click the Scatter-loading (on the right side of the program).
4. In the folder with the firmware, select the file MT6752_Android_scatter.
5. Make sure that the Flash Tool automatically put down the boxes next to all the firmware files. (Picture attached for manual upolad &reference)
6. Click the Download button in the Flash Tool.
7. Turn off your phone, then remove and reinsert the battery. (In our case, its already off, so u can skip this step)
8. Connect your phone to the PC and wait for the flashing process. (around 26 minutes, grab some coffee)
9. When Flash Tool window appears green circle, unplug usb cable, turn on the phone.
10. Enjoy your ZTE BLADE Q LUX 4G
pls let me know is if u need my help..
have a nice day...
ps: moderator, u can mark this post as SOLVED...Thanks..
Click to expand...
Click to collapse
Hi, I followed this guide
The phone went brick for some weird reason, tried flashing as instructed and the phone is back again
Unfortunately the imei seems to be missing (can't even detect my simcards)
Anyway I can restore them back?
ferbulous said:
Hi, I followed this guide
The phone went brick for some weird reason, tried flashing as instructed and the phone is back again
Unfortunately the imei seems to be missing (can't even detect my simcards)
Anyway I can restore them back?
Click to expand...
Click to collapse
yes..u can use Maui META Tool or MTK Engineer Mode (play store)..both works...btw, im not using the phone anymore...sold it..
raymond_bqg said:
please upload a custom rom for this model to make the mobile faster.
Click to expand...
Click to collapse
only russiian versioan avaiable so far... google for it
hi.. just wondering, are there qualcomm & mtk version for zte blade q lux 4G ?
I have meizu m2 note. Its now bricked. I was using sp flash tool to unlock the bootloader and install twrp recovery.
i was following the guide giving on youtube. I can't attach an outside link here.
So i did everything this guide said, but on the last step when i switched off my phone and connected to the usb port. The sp flash tool stopped working i waited for 5-10 mins. Finally it crashed. Now when i try to connect my phone it says usb device not recognised (the last device you connected to this computer malfunctioned). I cannot start my phone. I tried pressing the power button for 10 secs, tried pressing volume + with power button, nothing happens.
Anybody have any idea how to solve this.
Go to download old version Flyme os 4+ any but original rom you have must install,
And dow load any latest sp tool,
And also downlaod latest all mtk devices drivers,
If you have system knoledge you can install all of these pc softwares,
Test it once again your phone connecting to computer,
Just detected only nothing. Can do that its just detected your will be alive soon but its very easy if you know a little bit mobile knowledge,
Lets go to process
Step 1 check best and good branded usb connecting cable, test to connect usb cable to your phone,
Step 2 extract Flyme stock rom, and extract mtk sp tool,
Step 3 open sp tool showing error there is no any scatter. Or download file dont worry, da file availble at sptools folder you can go and select, and scatter. File availble at flyme stock rom folder lets check it then select firmware all formate and install that you have to select that option, then you select download and now connect your phone just leave ituntill done then your phone is will alive feel happy like me if you need any more information any other problem connect. To. Me
Can you speak more clearly?I don't understand.Because my English is not very good.
zzx3731 said:
Can you speak more clearly?I don't understand.Because my English is not very good.
Click to expand...
Click to collapse
What problem with your phone?
Hi ! I have the same problem right now, when I plug it, it says device not recognised, what could I do now ?
Thank you very much，This is my mobile phone. It's done.Thank you for your kindness.
：○
Hagadou said:
What problem with your phone?
Click to expand...
Click to collapse
I been able to install LineageOS, I fixed it by pressing home and menu button, it disconnect and reconnect and i been able to Re-flash it with the recovery and when i tried to install Lineage, my error was gone (error 7)
Ok guys here is the step by step even for noobs how to unbrick Xiaomi Mi Max (helium).
If you have access to fastboot jump to step 11
Requirements :
* MiFlash Beta :Download Here
* MiFlash 20151028 : Download Here
* Global Fastboot Rom : Download Here
* Xiaomi Qualcomm Drivers
* Screw and tools.
* Paper clip or cable
* For sure Usb Cable.
Now if you all ready lets continue repair. First of all you need to open back cover.
1) Open Back cover and disconnect fingerprint sensor and battery. Dont connect battery till you finish whole process. (How to disassemble video : https://www.youtube.com/watch?v=YMG04GqVU_0&t=64s)
2) Make a paper clip to setup short circuit in your mainboard. Here are the testpoints. https://s15.postimg.org/s0j0qhq3v/Xiaomi_Max_Test_Points.png
3) Ok here is the hardest and trickiest one. While you are holding paper clip or cable with those testpoint you need to connect phone to pc. My suggestion 1st connect usb cable to phone then make short circuit then connect to pc.
* One more time you need to connect phone to pc while those two testpoints connected to eachother with a paperclip or a cable.
4) Here is the second tricky part. Unzip rom file. Important part is the name of folder. Please try to make it as short as possible.
Ex : C:\mimax\
So after extraction your folder will looks like this : http://oi63.tinypic.com/334rr11.jpg
5) You need to install both MiFlash versions. They are 2 different software so you shouldnt see any errors like "it is already installed".
6) Go To C:\XiaoMi\XiaoMiFlash and run XiaoMiFlash.exe as an administrator. Click browse and choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax)
7) Click "refresh" you will see COM port and click "flash" If you dont see any COM port here first check if you installed drivers correctly. If drivers are installed correct please go back to step 3 and try again.
8) Install will start and continue and %99 possibly it will stop in the middle You will receive Max buffer 256 error. No worries just keep calm and take deep breath. Go to next step
9) Disconnect usb cable from pc and phone. Reconnect battery. Now voila phone will ready to work BUT NOT READY TO WORK FLAWLESS. So now put your phone to fastboot mode. Yes you read correct now your phone will be in fastboot mode even it could be ready to use but just wait for next step.
10) Fastboot mode : Volume Down + Power button you will see fastboot screen and connect to PC.
11) Now close old MiFlash and run the normal one from either desktop or C:\Program Files (x86)\Xiaomi\MiPhone\MiFlash.exe or C:\Program Files\Xiaomi\MiPhone\MiFlash.exe.
12) Choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax).
13) Click "refresh" and this time you have to see device serial number on device tab. Now click flash and let process finish. It takes around 3-5 minute and phone will reboot by itself.
Now re-assemble your phone. DONT FORGET TO CONNECT FINGERPRINT SENSOR. Now you are totally ready.
Tried 5 times with my very own Xiaomi Mi Max 128 GB.
Different reactions
Hi,
My device could still boot on fastboot mode, and flashes successfully through it on MiFlash Beta. However, the device remains stuck on Mi logo. I've already tested flashing on EDL mode apparently successfully, with the same results. I've flashed TWRP, but the device don't enter recovery mode. What can I do? Any suggestion will be welcome.
benzersizadam said:
Many thanks for this thread, I stuck on my mi max with no reaction at anything, I read more than 100 threads, I tried testpoint, DFC (deep flash cable), click inside usb terminal to pc, windows 8, 7 10, 32 bits, 64 bits, programms like qfil (qpst), flasher tools for other phones and nothing, before with other apps at first second gives me error "can not read from port COM...", and now at least advance to 5 seconds with same error, I need to know it is neccesary too disconnect, remove two plastic cables down where places the battery
Click to expand...
Click to collapse
Working also with Hydrogen. Thanks.
@benzersizadam
This is why XDA is a great FORUM! Thank you for writing this thorough solution!
My device is up and running currently with MIUI 8! It went from a dead brick to a productive device again! I was almost giving up hope! You saved the day! It was a lot of work, but it is great seeing the device alive again.
I would just add that taking the cover off doesn't even need a tool like in the original disassembly youtube video: https://www.youtube.com/watch?v=dULcMWCEgEc
Yay!
coffee-turtle said:
@benzersizadam
This is why XDA is a great FORUM! Thank you for writing this thorough solution!
My device is up and running currently with MIUI 8! It went from a dead brick to a productive device again! I was almost giving up hope! You saved the day! It was a lot of work, but it is great seeing the device alive again.
I would just add that taking the cover off doesn't even need a tool like in the original disassembly youtube video: https://www.youtube.com/watch?v=dULcMWCEgEc
Yay!
Click to expand...
Click to collapse
Can you kindly explain some tips or secret to get unbrick cause mine is more than 4 months almost totally dead, just receive charge the battery but any signal of life in display, don´t enter recovery, fastboot, in mode EDL pc identifies like hs-usb qdownload 9008 but in 4 or 5 seconds cut conection with pc. and in my country nobody knows about Xiaomi. thanks in advance
SubwayChamp said:
Can you kindly explain some tips or secret to get unbrick cause mine is more than 4 months almost totally dead, just receive charge the battery but any signal of life in display, don´t enter recovery, fastboot, in mode EDL pc identifies like hs-usb qdownload 9008 but in 4 or 5 seconds cut conection with pc. and in my country nobody knows about Xiaomi. thanks in advance
Click to expand...
Click to collapse
Hi @SubwayChamp Everything I did was in the post and video from above in the first post by benz....
His instructions were perfect along with the youtube video. It's tricky, true, but with patience you can go through the steps and get your device running again. I was so glad that @Qulox gave me this link to this thread.
As you go through the steps, if you get stuck, we can try to give you advice.
This works for Hydrogen as well.
Many thanks
I have two dead mi max. One 128gb helium and one 32gb hydrogen.
128gb helium is completely lifeless. No charging led, no vibrations, no fastboot mode. Though i could bring it up to edl mode showing right qualcomm device in device manager. I tried flashing stock rom as mentioned in this guide which rather went successful without giving any error, even while battery connector was removed.
But mobile is still in same lifeless condition. Other than flashing process going through, it didnt make any difference. Dont know whats wrong. Also i didnt have to use two miflash versions as mentioned in steps as flashing process didnt give any error.
32gb hydrogen, boots up in flashboot mode, shows charging led, mi logo even edl model worked without any issue. It even boots up, but gives error of encryption unsuccessful asking me to reset device. I tried factory reseting it. Tried flashing twrp and wiping, formatting data, changing file system to all formats like fat, f2fs, ext1, ext2, ext3, ext4. Tried flashing crdoid and RR based on orea. Nothing working.
With twrp it keeps bootlooping showing mi logo. And with stock rom, recovery shows up encryption error. Followed procedure mentioned in this guide as well.
Is there anything am i missing or can do? Btw, bootloader is locked for both the devices. I could flash twrp referring another guide which suggested to replace stock recovery in rom files/ folder and flashing it like stock rom through miflash tool.
Battery problems? in the 128 especially?
If "nothing works" through any normal software methods, the ram &/or ROM memory chips might have become semi-defect. They are not eternal . . .
cobben said:
Battery problems? in the 128 especially?
If "nothing works" through any normal software methods, the ram &/or ROM memory chips might have become semi-defect. They are not eternal . . .
Click to expand...
Click to collapse
Tried replacing battery as well. Surprising thing is completely dead 128gb helium does boot up in edl mode with flashing working perfectly file in miflash tool. Dont know how reliable that software is.....
Hello,
trying with both Helium & Hydrogen. Still on error like say these logs.
log#1
Code:
[0,02 COM7]:[COM7]:start flash.
[0,02 COM7]:received hello packet
[0,02 COM7]:can not found programmer file.
log#2
Code:
[0,00 COM7]:[COM7]:start flash.
[2,03 COM7]:cannot receive hello packet,MiFlash is trying to reset status!
[4,56 COM7]:cannot receive hello packet,MiFlash is trying to reset status!
[7,11 COM7]:try to reset status.
[7,13 COM7]:Switch mode back
[7,13 COM7]:cannot receive hello packet,MiFlash is trying to reset status!
[7,14 COM7]:Riferimento a un oggetto non impostato su un'istanza di oggetto.
Hope anyone can help me. What's my wrong following the guide.
Thanks
harpy.eagle said:
Tried replacing battery as well. Surprising thing is completely dead 128gb helium does boot up in edl mode with flashing working perfectly file in miflash tool. Dont know how reliable that software is.....
Click to expand...
Click to collapse
Hi there.. The link of video & image of test points is not working. Can anybody please share working links
Hi there.. The link of video & image of test points is not working. Can anybody please share working links
rizkhan77 said:
Hi there.. The link of video & image of test points is not working. Can anybody please share working links
Click to expand...
Click to collapse
This is the video of Test Point https://youtu.be/SqcVY8IWkZI
benzersizadam said:
Ok guys here is the step by step even for noobs how to unbrick Xiaomi Mi Max (helium).
If you have access to fastboot jump to step 11
Requirements :
* MiFlash Beta :Download Here
* MiFlash 20151028 : Download Here
* Global Fastboot Rom : Download Here
* Xiaomi Qualcomm Drivers
* Screw and tools.
* Paper clip or cable
* For sure Usb Cable.
Now if you all ready lets continue repair. First of all you need to open back cover.
1) Open Back cover and disconnect fingerprint sensor and battery. Dont connect battery till you finish whole process. (How to disassemble video : https://www.youtube.com/watch?v=YMG04GqVU_0&t=64s)
2) Make a paper clip to setup short circuit in your mainboard. Here are the testpoints. https://s15.postimg.org/s0j0qhq3v/Xiaomi_Max_Test_Points.png
3) Ok here is the hardest and trickiest one. While you are holding paper clip or cable with those testpoint you need to connect phone to pc. My suggestion 1st connect usb cable to phone then make short circuit then connect to pc.
* One more time you need to connect phone to pc while those two testpoints connected to eachother with a paperclip or a cable.
4) Here is the second tricky part. Unzip rom file. Important part is the name of folder. Please try to make it as short as possible.
Ex : C:\mimax\
So after extraction your folder will looks like this : http://oi63.tinypic.com/334rr11.jpg
5) You need to install both MiFlash versions. They are 2 different software so you shouldnt see any errors like "it is already installed".
6) Go To C:\XiaoMi\XiaoMiFlash and run XiaoMiFlash.exe as an administrator. Click browse and choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax)
7) Click "refresh" you will see COM port and click "flash" If you dont see any COM port here first check if you installed drivers correctly. If drivers are installed correct please go back to step 3 and try again.
8) Install will start and continue and %99 possibly it will stop in the middle You will receive Max buffer 256 error. No worries just keep calm and take deep breath. Go to next step
9) Disconnect usb cable from pc and phone. Reconnect battery. Now voila phone will ready to work BUT NOT READY TO WORK FLAWLESS. So now put your phone to fastboot mode. Yes you read correct now your phone will be in fastboot mode even it could be ready to use but just wait for next step.
10) Fastboot mode : Volume Down + Power button you will see fastboot screen and connect to PC.
11) Now close old MiFlash and run the normal one from either desktop or C:\Program Files (x86)\Xiaomi\MiPhone\MiFlash.exe or C:\Program Files\Xiaomi\MiPhone\MiFlash.exe.
12) Choose your rom folder. NOT IMAGES FOLDER ROM FOLDER !!!! ( Ex : C:\mimax).
13) Click "refresh" and this time you have to see device serial number on device tab. Now click flash and let process finish. It takes around 3-5 minute and phone will reboot by itself.
Now re-assemble your phone. DONT FORGET TO CONNECT FINGERPRINT SENSOR. Now you are totally ready.
Tried 5 times with my very own Xiaomi Mi Max 128 GB.
Click to expand...
Click to collapse
hi, could someone share with me the miflash beta? I can download the rest but I cannot download the beta one.
thanks
Wanted to say thank you was able to recover my mi max 64gb unit.
1. What is a "hard bricked" phone?
Hard brick is the state of android device that occurs when your device is unbootable without a bootloop. A hard Brick device generally show little to no signs of life (you wont be able to switch it on and the screen doesnt turn on).
A phone gets hard-bricked due to trying install ROM not made for the device or use ROM Manager incorrectly.
2. Procedure
Step 1: Download all the necessary files below:
download link: en(dot)miui(dot)com/a-234.html
MIUI ROM Flashing Tool(*.exe file)
MIUI Fastboot ROM package for your device(*.tgz file) - Any variant Global / Chinese should work
Step 2: Extract MIUI Fastboot ROM package using 7zip or any other software you prefer
Correctly extracted folder should look like: (Image folder), flash_all.bat e.t.c.
After extracting rename parent folder to something short such as "mido". Avoid parent folder of ROM package extracts being too long
Step 3: Install MIUI ROM Flashing Tool
If you get "driver not signed pop up during installation click "install anyway option or similar"
To test if everything installed correctly, connect your phone to your computer and open flash tool then hit refresh button, you should see an index and com port which indicates your phone is being detected.
If phone not detected restart computer with phone still connected and navigate to device manager->ports (you should see something like Qualcomm hs-usb qdloader 9008.) if its not there re install MIUI ROM Flashing tool
Note that if you try to flash your extracted package at this point the installer will fail to communicate with the phone, step 4 is very necessary to ensure flashing can commenceStep 4: Remove back cover and disconnect phone battery
Disconnect your phone from your PC and find a nice dissasembly video on youtube to help you remove the back case of your phone. The battery is connected to the phone via one black flex cable on the right of the battery, simply detach this to disconnect battery.
Step 5. Flash your phone.
With your phone still opened, and battery still disconnected.
1. Open Flashing tool and connect your phone to your computer
2. Hit refresh to let your computer detect your phone.
3. Hit select/browse button and select parent folder from step 2. which has your rom
4. Select clean all option at the bottom of flash tool window
4. Hit flash.
5. Once flash is complete your phone will remain off disconnect from computer and reconnect the battery then switch your phone on.
3. Done
At this point your phone should be back to life. Close your phone's cover and then youre done.This guide helped me revive my Redmi note 4X snapdragon 625 3GB - please share youre experience if it doesnt work for you
Thanks man!!!!!!!!!!
Y day my rn4 sd hard bricked, with your guide I completely recover it.......
Once again thanks...... :victory:
Please, help me:
"cannot receive hello packet,MiFlash is trying to reset status!"
alexfelipe said:
Please, help me:
"cannot receive hello packet,MiFlash is trying to reset status!"
Click to expand...
Click to collapse
Yeah, I'm getting that. And then "Object reference not set to an instance of an object" But then I just tried a few more times, maybe unplugged the cable and plugged it in again, and it worked.
not working
not working on my RN4X. while using MiFlash 2015 it is stuck on "Send nop command" and while using the 2016 version of MiFlash it is either "cannot receive hello packet" or cannot "ping". the latest version of MiFlash cannot be installed because of some cabinet file is missing. I'm stuck with this for a whole day now. is there anything that I'm missing??