Does anyone notice there's a big bug with WiFi on the G2?
I have 2 WiFi ac routers, one at home and one at the Office, an Asus RT-ac66U and a Linksys ea6700. Both capable of 1750mbps max speeds.
Internet speeds are 120/6 and 200/20.
Scenario is exactly the same for both routers;
When fresh reboot the router, G2 connects at a speed of 433Mbps.
Speedtests show results of 119/6 at home and 190/20 at the office.
Great you would say!
But here goes. Once WiFi get disconnected and reconnected, speeds go down to ~40mbps. No matter what I do!
These are N speeds, not AC
When looking at connection settings it still shows a link of 433mbps
Tested dozens of times, on both routers, so it has to be an issue with the G2.
Anyone else noticed the same??
DAMN, should have been in Q&A, mods plz move
I'm not an expert on wi-fi, but have stumbled through setting up several routers around the house. But I do not have an ac router.
Is the home router in mixed mode? Ignoring a/b/c for a moment and focusing on g and n (and implying ac), I have two wireless routers in the house. One runs N only (but both 2.4 ghz and 5 ghz) and the other runs G only. Now, my N router is capable of running in mixed mode (to handle both N and G) BUT in mixed mode, my max speed when connected in N is lower than it would be if I ran in dedicated N mode.
Most of my devices now are at least N (2.4 or 5) but I have an older printer and wii that only do G. But as mentioned above, rather than run my best router in mixed mode, I run 2 separate routers, one in N only and one in G only.
Maybe something similar might help with your ac speeds?
Really appreciate your input!
But I already tried settings like AC only etc. Doesn't make any difference.
Once connected for the second time and up to the router no more AC speeds...
Sent from my LG-D802 using XDA Premium 4 mobile app
Is there a way to test LAN speeds on Android? I have the same Asus router but my wan speeds are so pitiful that I wouldn't be able to tell if the phone was dropping to N speeds. If I could test speeds to my desktop across the local network I might be able to test what you are experiencing.
Sent from my VS980 4G using Tapatalk
Is there a way to check on the phone, which band it's connecting to? I haven't found anything.
I have the same router and my issue is on reconnect. I leave my wifi on all the time. When I get home, it connects automatically the moment I pull up to the house. The problem is, the speed is severely crippled. Range is awesome, speed is bad. I have to cycle the wifi and reconnect. Once done, no more problems.
One thing I should note, I was having the same issue occasionally on my Droid RAZR after getting the ASUS. Does anyone know if they use the same wifi hardware? Maybe it's an issue with the router itself?
jasonsf said:
Is there a way to test LAN speeds on Android? I have the same Asus router but my wan speeds are so pitiful that I wouldn't be able to tell if the phone was dropping to N speeds. If I could test speeds to my desktop across the local network I might be able to test what you are experiencing.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
crashN2u said:
Is there a way to check on the phone, which band it's connecting to? I haven't found anything.
I have the same router and my issue is on reconnect. I leave my wifi on all the time. When I get home, it connects automatically the moment I pull up to the house. The problem is, the speed is severely crippled. Range is awesome, speed is bad. I have to cycle the wifi and reconnect. Once done, no more problems.
One thing I should note, I was having the same issue occasionally on my Droid RAZR after getting the ASUS. Does anyone know if they use the same wifi hardware? Maybe it's an issue with the router itself?
Click to expand...
Click to collapse
@jasonff
Don't know about an app to test lan speeds unfortunately.
Think a google search would come up with lots of options.
@crashN2u
I leave my wifi on too all the time for now, it keeps it at full speed then.
There's no way to check which band you are connected to.
Router doesn't have an option to choose AC Only, only N +AC
And in the mean time I have tested it with 4 AC routers, Asus RT-AC66U, Netgear R6250, Linksys EA6700, D-Link 868L.
With all routers exactly the same conclusion. First time everything is great. Excellent speeds. If you never turn off WiFi it remains at high speed.
But once you turn off WiFi on the Phone and turn it back on it immediately drops to ~36-40mbps max (N Speeds).
This remains until I rebooted each router and after that full speeds again.
It must be something in drivers LG used.
There's the solution to for, I'm sure of it by now.
Well, I can see I won't be much help -- especially since the same result on 4 routers!
I am not sure if the following app supports AC, but a very helpful and free app I use is called "Wifi Analyzer". I can't post links but that is the exact name (author = farproc).
It has many useful tools/functions that you may find helpful, switchable between 2.4 and 5.0 ghz, channel scanner, etc.
Does your 2.4 ghz N and 5.0 ghz N/AC have different SSID's? From what I read, AC is 5 ghz only and N can be either 2.4 ghz or 5.0 ghz. I wonder if you are dropping from 5.0 AC to 2.4 N because the 2.4 N is being detected as "stronger signal" than the 5.0 AC at reconnect time?
I named my 2.4 ghz N SSID as "Blah" and 5.0 ghz N SSID as "Blah_5ghz" just so I know what frequency I'm on at a glance (using a widget that shows the SSID) but many routers by default will have both SSID's the same, making it less obvious what band you are connected to. I also use an app called "WIFI Prioritizer" (author Robert Botha), which will allow me to connect or re-connect in the SSID order I specify: i.e. when I get home I will connect to SSID "Blah" (2.4 ghz N because it has the longest range). Every 5 mins (you can specify), it checks to see if my SSID "Blah_5Ghz" is in range and will switch to it if it is (you can also set signal strength connect and disconnect thresholds).
Anyways, I probably can't help further but am following this thread with interest. Good luck!
Klotar said:
Well, I can see I won't be much help -- especially since the same result on 4 routers!
I am not sure if the following app supports AC, but a very helpful and free app I use is called "Wifi Analyzer". I can't post links but that is the exact name (author = farproc).
It has many useful tools/functions that you may find helpful, switchable between 2.4 and 5.0 ghz, channel scanner, etc.
Does your 2.4 ghz N and 5.0 ghz N/AC have different SSID's? From what I read, AC is 5 ghz only and N can be either 2.4 ghz or 5.0 ghz. I wonder if you are dropping from 5.0 AC to 2.4 N because the 2.4 N is being detected as "stronger signal" than the 5.0 AC at reconnect time?
I named my 2.4 ghz N SSID as "Blah" and 5.0 ghz N SSID as "Blah_5ghz" just so I know what frequency I'm on at a glance (using a widget that shows the SSID) but many routers by default will have both SSID's the same, making it less obvious what band you are connected to. I also use an app called "WIFI Prioritizer" (author Robert Botha), which will allow me to connect or re-connect in the SSID order I specify: i.e. when I get home I will connect to SSID "Blah" (2.4 ghz N because it has the longest range). Every 5 mins (you can specify), it checks to see if my SSID "Blah_5Ghz" is in range and will switch to it if it is (you can also set signal strength connect and disconnect thresholds).
Anyways, I probably can't help further but am following this thread with interest. Good luck!
Click to expand...
Click to collapse
My Phone is packed with tools like Wifi Analyser, InSISDer etc etc atm
I always separate 2.4 and 5ghz networks to be able to see exactly what's going on but thanks for the heads up :good:
From further investigation and thinking, and with your suggestion about stronger signals;
Thing is, AC routers are more or less all simultanious routers.
That combines 2.4 and 5ghz signals for higher transfer speeds.
I think in there lies the problem when drivers are not 100%.
In theory 2.4 signals are stronger then 5ghz signals and have wider range.
But in testing I made sure that I was in the same room and no more than 2 meters away from the router.
when testing it showed equal signal strength up to -20 so really strong signals.
Therefore I concluded that N on 2.4 whas equally strong as 5ghz and then again I isolated 5ghz SSID so that's not it unfortunately.
I promised to stay away but I can't resist!
Have you tried some of the more generic troubleshooting tips (on the home network), such as trying with no security or lesser security (WEP) to see if it still reconnects at the lower (N) speeds? I realize that usually that test is of course for a more basic issue than yours but maybe the G2 has trouble handling security overhead.
Some devices and routers just don't like each other (as many know), but 4 different routers...?! Gotta be the G2 side, as you've surmised. Wish I knew someone with an ac router so I could test myself. I'm debating on getting an ac router but you've got me spooked! (kidding/teasing)
Well haven't tried lower or no security.
When I have the chance (aka the wife is away and not *****ing about wifi not available ) I'll sure try that.
But I don't think that WEP will be an option because AC requires AES protection if I'm not mistaken.
But really do not be afraid to get yourself an AC router hehe.
No honestly, I've tested 4 routers with:
AC Capable:
HTC One. Goes all the way to max isp speeds. All the time, no issues
LG G2.
Not AC Capable.
IPhone 5. Max speed at 5ghz (constantly tested) is ~90-100mpbs.
HTC One X. Max speed at 5ghz (constantly tested) is ~70-90mpbs.
So even if your hardware maybe not be capable of AC speeds you still get excellent connections
Oh and for the record.
Here's my personal listing of the hardware I've tested. From best to well not so good.
1. Netgear R6250.
Excellent constant speeds. No drops whatsoever with around 6 devices connected. Excellent range!
2. Asus RT-AC66U
Shame Asus introduced a new wifi driver some time ago which doesn't perform that well. Constant speed drops.
They know about it but thusfar no solution.
When you get this one, stay on old firmware for now!
3. D-link 868L
Real looker this one. Can be put in plain sight in the room like a picture frame :silly:
Great constant speeds, but some drops here and there.
Excellent range.
4. Linksys EA6700
Linksys is sold to Belkin by Cisco.
Up to now I have never seen anything good coming from Belkin!
What a piece of crap.
With a really thin wall between router and phones coverage went down more dan half. Hell even when distance less than 2 meters away coverage was about -45.
Do not get this crap!
I wonder... the wireless N spec (not sure if also AC) calls for devices and routers to have a 'low power mode', which may or may not be enabled in routers and/or phones (e.g. GS3) by default. According to some article I read, newer routers may go into a power saving mode if it detects low traffic and supposedly ramp up when the traffic increases.
Possibly it doesn't ramp up fast enough when a new device connects and the device mistakes it for not having the highest speed (AC) capability. Might explain fast speeds after router bootup but not later. If there is any truth to that (no clue here), it might speed itself up either by testing with a larger file or seeing if the "2nd connect" condition changes while say, streaming videos from the PC to the Xbox or watching Netflix on the main TV. Certainly, either would be considered high traffic and if there is no change to the 2nd connect, well -- there goes that idea.
Is there a wifi power saving mode on the G2 like there is on the GS3? (i.e. dialing *#0011# to turn it off).
Klotar said:
I wonder... the wireless N spec (not sure if also AC) calls for devices and routers to have a 'low power mode', which may or may not be enabled in routers and/or phones (e.g. GS3) by default. According to some article I read, newer routers may go into a power saving mode if it detects low traffic and supposedly ramp up when the traffic increases.
Possibly it doesn't ramp up fast enough when a new device connects and the device mistakes it for not having the highest speed (AC) capability. Might explain fast speeds after router bootup but not later. If there is any truth to that (no clue here), it might speed itself up either by testing with a larger file or seeing if the "2nd connect" condition changes while say, streaming videos from the PC to the Xbox or watching Netflix on the main TV. Certainly, either would be considered high traffic and if there is no change to the 2nd connect, well -- there goes that idea.
Is there a wifi power saving mode on the G2 like there is on the GS3? (i.e. dialing *#0011# to turn it off).
Click to expand...
Click to collapse
Good point!
Well, there is a setting in wifi, advanced to minimize use of wifi when screen is off. Sounds like a power save mode to me.
But, just tested it and that makes no difference.
With that setting deactivated on the G2 still at first boot AC speeds and when I switch off and on wifi I still get N speeds max.
And besides that, on the Asus router there's a setting called "Enable WMM APSD". Which stands for "Automatic Power Save Delivery".
I read up on that and the custom firmware guru RMerlin writes about that setting that especially Android devices could suffer from that setting.
So I disabled that a long time ago.
On other routers I couldn't find such setting.
But to iron that setting out I just tested it once more.
First with setting off. Still first connect AC speeds, after turn off/on back to N speed.
Then turned wifi off, enabled the setting and rebooted the router.
But this time to let the supposedly power save kick in I let my Phone idle for 15 minutes so that it surely was in deep sleep.
Then turned screen on, and again AC speeds when first connected.
After that turned wifi off, screen of for 15 minutes. Turned screen on again and once more N speed.
And link speed is always shown as 433mbps btw, which is correct.
There's just some bug in driver code by LG which doesn't work correctly.
I'm more and more convinced of that.
For now I just keep wifi on all the time so that I always get full speeds.
Batt is capable enough so no problem there
LittleH79 said:
Good point!
Well, there is a setting in wifi, advanced to minimize use of wifi when screen is off. Sounds like a power save mode to me.
But, just tested it and that makes no difference.
With that setting deactivated on the G2 still at first boot AC speeds and when I switch off and on wifi I still get N speeds max.
And besides that, on the Asus router there's a setting called "Enable WMM APSD". Which stands for "Automatic Power Save Delivery".
I read up on that and the custom firmware guru RMerlin writes about that setting that especially Android devices could suffer from that setting.
So I disabled that a long time ago.
On other routers I couldn't find such setting.
But to iron that setting out I just tested it once more.
First with setting off. Still first connect AC speeds, after turn off/on back to N speed.
Then turned wifi off, enabled the setting and rebooted the router.
But this time to let the supposedly power save kick in I let my Phone idle for 15 minutes so that it surely was in deep sleep.
Then turned screen on, and again AC speeds when first connected.
After that turned wifi off, screen of for 15 minutes. Turned screen on again and once more N speed.
And link speed is always shown as 433mbps btw, which is correct.
There's just some bug in driver code by LG which doesn't work correctly.
I'm more and more convinced of that.
For now I just keep wifi on all the time so that I always get full speeds.
Batt is capable enough so no problem there
Click to expand...
Click to collapse
I found a tool to test local network speed. It uses two android devices for a p2p test or you can install a server program on your PC. I'll do some testing and see if I can reproduce what you are seeing. Here's the link: http://pzoleeblogen.wordpress.com/2013/08/12/local-network-speed-test-for-android/ and the market link: https://play.google.com/store/apps/details?id=com.pzolee.android.localwifispeedtester&hl=en
And to be sure I understand, you boot your phone with wifi on, AC speeds. Turn off wifi on phone and turn it back on, N speeds. Reboot phone with wifi on, back to AC speeds. Correct?
jasonsf said:
I found a tool to test local network speed. It uses two android devices for a p2p test or you can install a server program on your PC. I'll do some testing and see if I can reproduce what you are seeing. Here's the link: http://pzoleeblogen.wordpress.com/2013/08/12/local-network-speed-test-for-android/ and the market link: https://play.google.com/store/apps/details?id=com.pzolee.android.localwifispeedtester&hl=en
And to be sure I understand, you boot your phone with wifi on, AC speeds. Turn off wifi on phone and turn it back on, N speeds. Reboot phone with wifi on, back to AC speeds. Correct?
Click to expand...
Click to collapse
Thanks for the app!
Gonna test this for sure since I also have a HTC One lying around which is also AC capable
Not 100% corect.
I can do with phone what I want until wifi gets turned off.
Then a reboot of the router is required to get AC speed back.
No need to reboot the phone.
Quite busy atm so don't have enough time I would like to be testing
LittleH79 said:
Thanks for the app!
Gonna test this for sure since I also have a HTC One lying around which is also AC capable
Not 100% corect.
I can do with phone what I want until wifi gets turned off.
Then a reboot of the router is required to get AC speed back.
No need to reboot the phone.
Quite busy atm so don't have enough time I would like to be testing
Click to expand...
Click to collapse
Between my wife on her laptop, my son on his Chromebook and my daughter streaming Netflix on our Roku, I hardly ever have a chance to reboot the router without someone complaining
Since I haven't rebooted my router in days, from what you are saying I shouldn't see anything above N speeds until I reboot the router. Do you actually have to turn off wifi on the phone to have it drop from AC to N or is it enough to leave the range of the wifi and then come back? And does if turning it off is required, do I have to be connected to the router at the time I turn phone wifi off?
I'll try testing this weekend.
jasonsf said:
Between my wife on her laptop, my son on his Chromebook and my daughter streaming Netflix on our Roku, I hardly ever have a chance to reboot the router without someone complaining
Since I haven't rebooted my router in days, from what you are saying I shouldn't see anything above N speeds until I reboot the router. Do you actually have to turn off wifi on the phone to have it drop from AC to N or is it enough to leave the range of the wifi and then come back? And does if turning it off is required, do I have to be connected to the router at the time I turn phone wifi off?
I'll try testing this weekend.
Click to expand...
Click to collapse
Going out of range isn't a problem as long as you don't have an app or setting on in wifi, advanced to switch off wifi.
As long as wifi isn't turned off I can go everywhere, in&out of range, other routers connect but speeds remain AC, everywhere on every router.
I can reproduce everytime that when I turn off wifi on the phone and back on from then on I only get ~36-40mbps max.
It's like the phone thinks that's max capable speed altough wifi link speed is again shown as 433mbps.
If I have switched off wifi on the phone and back on, on all 4 AC routers I tested all needed a router reboot to gain full AC speeds again.
Oh and maybe a small tip, I always say to the misses at home that there's a small problem with connection so a quick reboot is required.
Up to now that still works
LittleH79 said:
Going out of range isn't a problem as long as you don't have an app or setting on in wifi, advanced to switch off wifi.
As long as wifi isn't turned off I can go everywhere, in&out of range, other routers connect but speeds remain AC, everywhere on every router.
I can reproduce everytime that when I turn off wifi on the phone and back on from then on I only get ~36-40mbps max.
It's like the phone thinks that's max capable speed altough wifi link speed is again shown as 433mbps.
If I have switched off wifi on the phone and back on, on all 4 AC routers I tested all needed a router reboot to gain full AC speeds again.
Oh and maybe a small tip, I always say to the misses at home that there's a small problem with connection so a quick reboot is required.
Up to now that still works
Click to expand...
Click to collapse
I just did a few tests from my phone to my pc with 100MB data sets. I got between 200 and 260 Mbit/s down both before and after toggling my phone's wifi off and on. Didn't seem to make a difference. I got about 6Mbit up.
So, I didn't seem to experience the problem you have. But try repeating what I've done with this local network app. Maybe you won't have the issue with it that you are seeing on your WAN connection.
jasonsf said:
I just did a few tests from my phone to my pc with 100MB data sets. I got between 200 and 260 Mbit/s down both before and after toggling my phone's wifi off and on. Didn't seem to make a difference. I got about 6Mbit up.
So, I didn't seem to experience the problem you have. But try repeating what I've done with this local network app. Maybe you won't have the issue with it that you are seeing on your WAN connection.
Click to expand...
Click to collapse
What router or AP do you use?
/s
shaglord said:
What router or AP do you use?
Click to expand...
Click to collapse
Asus RT-AC66U
jasonsf said:
Asus RT-AC66U
Click to expand...
Click to collapse
Wow and do you really see real transfer rates of 25-30 MB/s to your G2?
I'm using a Qualcomm Atheros based AC-router and my G2 (running latest CM11) hardly goes over 10 Mbit ~ 1,5 MB/s. Weak I know. (Confirmed 433 Mbit link using a wifi app.)
Maybe I need a broadcom-router like yours to see some real AC-speeds.
Thanks for the reply. Take care
/s
To be clear off the bad, its not the router. Every other device in the house that connects to the 5ghz band works flawlessly. This is a brand new international phone being use with AT&T in the US, calls and texts function fine. Phone is fully updated and so is the router.
Wifi however is only picks up 2.4ghz bands. Not 5ghz.
Wifi analyzers pick up 2.4ghz but when switching to 5ghz I get a messages stating my phone does not support 5ghz. Anyone else with this issue?
@aq3e No. It doesn't have 5GHz.
2.4GHz has better penetration through walls anyway.
5GHz is really only good if you're in the same room.
physwizz said:
@aq3e No. It doesn't have 5GHz.
2.4GHz has better penetration through walls anyway.
5GHz is really only good if you're in the same room.
Click to expand...
Click to collapse
The phone does 5GHz as mentioned on samsungs website : 802.11 a/b/g/n/ac 2.4+5GHz
Snekxs said:
The phone does 5GHz as mentioned on samsungs website : 802.11 a/b/g/n/ac 2.4+5GHz
Click to expand...
Click to collapse
I have dual band and can only see 2.4
Might be different in other countries.
Australia had only 2.4 as shown here.
Connectivity
ANT+
No
USB Interface
USB Type-C
USB Version
USB 2.0
Location Technology
GPS, Glonass, Beidou
Earjack
3.5mm Stereo
MHL
No
Wi-Fi
802.11 b/g/n 2.4GHz
Wi-Fi Direct
Yes
Bluetooth Version
Bluetooth v5.0 (LE up to 2 Mbps)
NFC
Yes
https://www.samsung.com/au/smartpho...-Q3bFagLE-84I8pWNocaAq5vEALw_wcB&gclsrc=aw.ds
I also dont have 5ghz and dont have the advacned wifi option to change bands... Why this model suck this much? Probably a OS stupid limitation...
rophiroth said:
I also dont have 5ghz and dont have the advacned wifi option to change bands... Why this model suck this much? Probably a OS stupid limitation...
Click to expand...
Click to collapse
5ghz is only good if you're in the same room
The A20 does support dual band, but it's disabled. I tried to enable it by replacing the mx140_wlan.hcf file located at /vendor/etc/wifi/ with the one from the A30 and it worked, but there's a problem.
For some reason the signal range is terrible, to detect a 5 GHz network the phone needs to be next to the router, if it gets some centimeters away the signal drops at the point where the network is not detected anymore.
physwizz said:
5ghz is only good if you're in the same room
Click to expand...
Click to collapse
5ghz wifi is certainly not only good in the same room, check online heatmaps of 2.4 vs 5ghz to compare, it's not a huge difference. Given how much less interference you will get on the 5ghz it often works a lot better than 2.4ghz even at longer ranges. Fix peoples internet for a living and I've seen thousands of peoples speeds double or even triple from changing to 5ghz even when router is on the first floor and they use it on the second.
FrankdonkeybrainReynolds said:
5ghz wifi is certainly not only good in the same room, check online heatmaps of 2.4 vs 5ghz to compare, it's not a huge difference. Given how much less interference you will get on the 5ghz it often works a lot better than 2.4ghz even at longer ranges. Fix peoples internet for a living and I've seen thousands of peoples speeds double or even triple from changing to 5ghz even when router is on the first floor and they use it on the second.
Click to expand...
Click to collapse
Read the article here.
It shows that 5ghz suffers from greater attenuation rates than 2.4
2.4 GHz vs. 5 GHz WiFi
Learn about when to use 2.4 GHz vs. 5 GHz WiFi with CenturyLink. The difference between these frequencies can affect your speed.
www.centurylink.com
physwizz said:
Read the article here.
It shows that 5ghz suffers from greater attenuation rates than 2.4
2.4 GHz vs. 5 GHz WiFi
Learn about when to use 2.4 GHz vs. 5 GHz WiFi with CenturyLink. The difference between these frequencies can affect your speed.
www.centurylink.com
Click to expand...
Click to collapse
(I know this doesn't help much with the OP's question but to dispel hearsay I felt it needed to be said.)
I know you don't know me, but I said I resolve peoples internet problems for a living both on supplier and consumer side and have tested this with thousands of customers but you trust a random article with very little info more and don't even bother to look at heat maps? This article has been made by someone who read a blurb about wifi, but they did get one thing right...
"A lot of electronic devices and appliances use the 2.4 GHz frequency, including microwaves, baby monitors, and garage door openers. If you have many of these in your home, or if you live in apartments or condos surrounded by other people, that 2.4 GHz band is likely to be congested, which can damage speed and signal quality."
That list is very short, it also includes lots of computer peripherals, security cameras, smart home devices, walkie talkies, radios, remote controls, wireless handsets (landlines, not mobiles) basically every wireless device you can think of uses 2.4ghz and even your microwave! all these devices on a long range signal means your neighbours devices also overlap to combine together to make the 2.4ghz band for most consumers a disaster for anything requiring more than slow speeds. This goes without even mentioning that the 2.4 ghz band only has 13 channels (3 none overlapping) to spread every wifi device out on to stop interference, in most residential are this is simply not enough. In many cases this is so bad that even next to the router people can lose 80 - 90% of their speeds or have so much interference that even loading webpages takes a long time due to the amount of data being lost.
Like I said before, even if the 5ghz DOES have shorter range, it is not so short that you have to be in the same room, what would be the point? That is a something people assume because it's a "shorter range signal" but it's not that short! the 5ghz is usually faster due to it's naturally higher data rates and more consistent due to the lack of interference from intermittent signals. Most things that interfere with 5ghz are constant and therefore it's much easier to test and know what speed you can get in other rooms away from the router, unlike the 2.4 which has the same issues with passing through anything only with a load of other issues on top too!. The 5ghz also has the advantage of having over 100 wifi channels to spread networks out on to avoid them interfering with each other, a vast upgrade to the 2.4ghz.
Here is an example of a heatmap comparing 2.4 and 5ghz but just looking at any article that goes beyond a very brief description will show you why the 2.4ghz is often so much worse than the 5ghz.
What's the Difference Between 2.4 and 5 GHz WiFi?
What do these numbers actually mean? Does it realy matter? Is one better than the other? How many questions are we going to ask in this description?
socialwifi.com
2ldr - It depends on your house and nearby networks, test both bands with different devices in different rooms and compare speeds, outside of doing more thorough testing with other apps and equipment this is the easiest and quickest way to see which will work better.
You have 2 choises use BT modem BT modem Plan A: one Device in 5GHz network one device sharing Internet from BT modem feature. +Advance use Open Garden mesh client for better Internet throught BT modem. Construction of my plan:One or two devices in 5GHz WiFi network and 3 devices creating PAN network trought Bluetooth.if Your Bluetooth version is 5.0 you can use Mesh network profile. than using Mesh network structure. Mesh Bluetooth network structure helping one device to other. but you need to know you will use 2.4GHz trought BT modem and Mesh networks.
TBM 13 said:
The A20 does support dual band, but it's disabled. I tried to enable it by replacing the mx140_wlan.hcf file located at /vendor/etc/wifi/ with the one from the A30 and it worked, but there's a problem.
For some reason the signal range is terrible, to detect a 5 GHz network the phone needs to be next to the router, if it gets some centimeters away the signal drops at the point where the network is not detected anymore.
Click to expand...
Click to collapse
I fixed this issue on crDroidAndroid-13.0-20221126-a20-v9.0 by copying both mx140_wlan.hcf and mx140.bin taken from this a30 git. Works great on my a20.
shammoi said:
I fixed this issue on crDroidAndroid-13.0-20221126-a20-v9.0 by copying both mx140_wlan.hcf and mx140.bin taken from this a30 git. Works great on my a20.
Click to expand...
Click to collapse
Interesting. What's your A20 model? I believe I also tried to do that, but I'm going to retry it.
Done it on a SM-A205W.
shammoi said:
Done it on a SM-A205W.
Click to expand...
Click to collapse
No luck. I still have the signal issue
Do it again in the following order maybe ?
1. Download both mx140_wlan.hcf and mx140.bin from the git I gave you above.
2. Turn your wifi off.
3. Reach /vendor/etc/wifi folder using your favorite file browser ( Mine is Mixplorer ).
4. Overwrite both files.
5. Reboot your device.
6. Turn Wifi back on.
7. Do a Wifi speed test ( Wi-Fi Sweetspots app for me ).
shammoi said:
Do it again in the following order maybe ?
1. Download both mx140_wlan.hcf and mx140.bin from the git I gave you above.
2. Turn your wifi off.
3. Reach /vendor/etc/wifi folder using your favorite file browser ( Mine is Mixplorer ).
4. Overwrite both files.
5. Reboot your device.
6. Turn Wifi back on.
7. Do a Wifi speed test ( Wi-Fi Sweetspots app for me ).
Click to expand...
Click to collapse
I use a Magisk Module instead of directly overwriting the files, but this should make no difference. I believe it may be a hardware difference between our devices. On the schematics the 5GHz antenna seems to be marked as optional, maybe that has something to do.
I tried to put my device next to the router, and when I did it the network got detected (with bad signal tough), I could connect and the download speed oscillated between ~50-200 mbps (my network has 300 mbps). Once I moved further from it, the WiFi disconnected as the signal was lost.
So like everyone else I have the 5GHz wifi problem. If I'm not in the same room as the router you can forget using 5GHz. So I found the link to the problem. I just don't know how to solve it. I connected to the 5GHz in a trouble location while having mobile data and Bluetooth turned on. Internet speeds were terrible to the point the speed test would barely run. I turned Bluetooth off, and the speed test are right on par with my old phone, and 5GHz is working fine while Bluetooth is off.
5Ghz is not meant for long range though, 2.4Ghz takes care of that..
You should be able to obtain a signal within around 30feet, potentially more, but it'll drop off at that point.
2.4 carries a lot better..
Could it be to do with the channels that the phone may be using for WiFi??
Turn off all WiFi devices and Bluetooth in the room and see how the test goes.
Very strange.
I am a bit confused as to why people are reporting needing to turn BT off to operate 5GHZ Wifi. BT operates in the 2.4xx space. If you are saying turning it off resolves your problem this points to either a greater hardware/software issue or that you are not operating in 5Ghz at all.
I understand how 2.4 and 5 work as far as range and bandwidth goes. I tested this theory in the same spot my old phone would get 100mbps down (what I pay for) while connected to 5Ghz Wifi. The OnePlus 8 Pro while connected to 5Ghz in the same spot with Bluetooth enabled would cause the phones speed to drop to around 5mbps down and sometimes to the point I get nothing and losing connection. Now if I repeat the same scenario but this time I disable Bluetooth the connection is stable and speeds are 90-100mbps down. I repeated this multiple times sitting in the same location. Yes I understand that BT uses 2.4Ghz. I'm not saying that you need to turn BT off for 5Hhz Wifi to function. What I am saying is some how on this phone, and reported by others, the 5Ghz Wifi on this phone does not function properly. There have been zero solutions or reasons why that I am aware of. My post was pointing to a possible reason why and the fact that it is a hardware/software problem and maybe the right person could look into. I have no reason why the BT being on and off affects the 5Ghz Wifi on this phone and not the 2.4Ghz but it does. And my old phone was a $300 Samsung A50 that I was testing this phone against in my post. I tried to find what channels the phone uses for WiFi but was unsuccessful. If you find the channel lost I would be more than happy to switch channels and see.
dladz said:
5Ghz is not meant for long range though, 2.4Ghz takes care of that..
You should be able to obtain a signal within around 30feet, potentially more, but it'll drop off at that point.
2.4 carries a lot better..
Could it be to do with the channels that the phone may be using for WiFi??
Turn off all WiFi devices and Bluetooth in the room and see how the test goes.
Very strange.
Click to expand...
Click to collapse
It ends up it is an issue with the channel. Before I bought the phone I had manually set my router to channel 153 because auto kept putting me on the same channel as my neighbor. The OnePlus will connect to channels 149 and 153 but isn't really functional. I had to select one of the UNII-1 Channels. Once I did that 5Ghz worked and is functional and stable. The sad part is the reception isn't nearly as good as my $300 Samsung. Maybe they'll improve that if they can. I'm still bewildered why turning off Bluetooth allowed channel 153 to work.
travle said:
It ends up it is an issue with the channel. Before I bought the phone I had manually set my router to channel 153 because auto kept putting me on the same channel as my neighbor. The OnePlus will connect to channels 149 and 153 but isn't really functional. I had to select one of the UNII-1 Channels. Once I did that 5Ghz worked and is functional and stable. The sad part is the reception isn't nearly as good as my $300 Samsung. Maybe they'll improve that if they can. I'm still bewildered why turning off Bluetooth allowed channel 153 to work.
Click to expand...
Click to collapse
Turn on auto channel on your router. You're going to have issues unless your entire network and devices are moderated perfectly.
Auto does the job