cm13 mokee rom... - Xiaomi Redmi 2 Questions & Answers

when i flash, it shows so many errors...anyone hav this problem??

State the errors displayed with current firmware

Related

How to upgrade lenovo a6000 plus without official OTA update...??

After receiving lenovo a6000 plus from lenovo service center ,it was on kitkat firmare.
when I tried to Upadte it through wifi.. after downloading while udating it shows error (Status 101).I also tried with installing stock Recovery but still it shows error ..
I have already tried to flash udate zip but it shows error.
Is there any way to upadate lenovo a6000 plus ..
plz suggest me any way to run lollipop on my device bcz all other rom needs lollipop firmware for base..
https://www.youtube.com/watch?v=Aejq4DW4XOA
Follow ED300's guide HERE on installing his CM12.1, after doing so, you'll be able to install any other SDK21+ ROM.
Remember to follow the guide carefully!

New S3A not booting and 4032 error on flash

I was wondering if somebody has got this before with the Jiayu S3A? I tried to flash a new S3A yesterday by spflashtool because it was delivered with a non rooted rom. Tried to flash an older 5.1 rom in order to flash custom recovery later on (and then 7.1.1 ofcourse ). However it gave me an error (PMT changed for the ROM, it must be downloaded) and some pages on google suggested a format (without bootloader) so I did that. After that I succesfully flashed a rom version 5.1 but when I tried to flash custom recovery or other roms, it kept giving the error message BROM ERROR : S_FT_ENABLE_DRAM_FAIL (4032) and the phone won't boot. Tried different roms and with/without battery, different settings, different drivers but I still can't flash a rom nor boot the device. Maybe the battery was drained in the process (it is now on a charger for a night). Or maybe it was a S3+ or something, sold with the wrong type?(The box and label on the telephone said JY-S3 and it had 32 gb so it can not be a S3+ right?) Never had this problem before with other S3's so I'm hoping that someone can help me! Thanks in advance.
Sounds like you messed things up completely by flashing the Lollipop ROM and formatting. You git the S3A with 32 GB RAM, right? Afaik this comes preinstalled with Marshmallow and there is no compatible Lollipop ROM for the S3A 32 GB.
If I were you I would try to flash stock MM again. If you really flashed Lollipop with formatting option in SP Flash Tool, you probably need to format, too. Make sure that the phone boots again. Next, flash TWRP recovery from m.a.d. team through SP Flash Tool. Finally flash the m.a.d. Nougat ROM, nano GAPPS and SuperSu in recovery.

J500FN scrambled Screen

Hi Folx.
I tried some Roms (7.1.2 Lineage, RR, Aosip) for my F500JN but on reboot i got only a scrambled screen (look attachment). I flashed the correct TWRP.
Any Idea whats wrong here?
EDIT:
Found another Thread. I was on 6.0.1 Stock. Need flash Stock 5.1.1 via odin and than flash the custom. Hope it will work.
Edit 2:
Working fine now.

SM-N9005 CUSTOM ROMS problem

When I flash custom firmwares(roms) in my note 3 SM-N9005, it always reboot, sometimes it will boot loop, I tried many different compatible roms in my note 3 , CM 13.1 (Trayder&Temasek), Slim ROM, but no chance, It keeps reboot, and bootloop.
So I recover to my Stock Firmware(rom).
TWRP version used: 3.1.1 (latest).
I also tried older versions of TWRP to flash the Custom Firmwares(roms).
Please help. :crying:
Start is boot to download mode >> What model is shown .
Two read roms instructions before flashing to work out what you are doing wrong .
JJEgan said:
Start is boot to download mode >> What model is shown .
Two read roms instructions before flashing to work out what you are doing wrong .
Click to expand...
Click to collapse
Thanks for the reply sir, but I alrdy solved it, the problem is my battery, I don't know why .
So I bought new battery and now there are no problems

Modem-cp crash+imei,drk lost[G935F]

I flashed the combination of binary U2 to restore my i Mei and drk error but it shows modem crash in the binary mode and cp crash mode.
I hope someone can give me a solution that's useful and it's okay for me to pay by PayPal after it has been fixed.
The following is the message I sent to cubz but he doesn't seem to be free to active these days so I hope anyone else can help me.
The letter :
{{{{Hi, I've seen many posts in the xda and many people refer the solutions and fix advice to your name on comment so I think you will be the only one who can help with my issue.
Firstly, I had my S7 edge flashed with many roms before and flashed with odin ( with sim card always, not knowing if this is a major problem), but after once I did after using the encryption on the S7 edge with the lineage OS ( the 8.1.0 one in Feburary), I tried to flash with other rom without decrypted it and flashed fail. ( roms are all android 7.0 and 7.1.2)
Since then, I tried to flash other rom (7.0 like superman rom or rom from SAC) but still losing cellunar signal. then I tried to flash the original android 6.0 official firmware through odin but it failed on the step which shows DRK error on the samsung official 6.0 recovery.
After reading your post on how to fix DRK error, I tried the method but maybe because of I don't really know the steps or how to restore on the binary factory firmware, it boots up but still lose of IMEI and cellunar signal.
After the android 8.0 is released officially, I flashed the official rom and I tried using the U2 version of bootloader binary factory which you shared, but same problem happens and I also tried the V5.7 devbase rom and same.
Very seldomly the baseband and imei will show as normal and having cellunar signal but not long and after I reboot will gone to unkonwn to the imei and baseband and show as 'no sim card'. ( there was one time that I ticked clear efs on odin then i lost the imei. But after i flashed the binary firmware, imei show unknown in the binary firmware mode but when i flashed back the devbase rom with twrp, the situation of mostly showing unkonwn of baseband and imei happens but very seldomly it will load as normal which they are shown correctly)
*Btw the first flash the U2 binary firmware( Im using the U2 version because my bootloader has been updated to the oreo one), it boots into the screen that shows cp upload or modem upload error? page , then i flash again but with efs clear which was what happened as I mentioned before. ( thats the only time I ticked EFS clear as i can remember)
Dear CuBz90:
I really hope that my s7 edge can be fixed because I have had it for more than two years already and it was the first time that i buy a phone using my own my money but not my parents, I hope you can help me with this issue.
Thank you very much!!!
( its okay if I have to pay( its okay through paypal) after its fixed, but hopefully not too much)}}}}
Cp crash upload exactly same as photo I found in the following link: (please add www by yourself coz it doesnt allow me to post external link as being a new user)
.galaxys-team.fr/viewtopic.php?t=49038
Thank you for patiently read and helping me to find solution for my S7edge (G935F)
help me too
I have the same problem... idk what i can do.................:crying::crying::crying:
it's my pleasure to help you

Categories

Resources