Database Users

Fingerprints where you are ?

Hi,
I have a very big problem.
After I’ve flashed this rom (Unofficial cm13 Mr. Coldbird), the fingerprint sensor disappeared from the settings
How can I fix it?
P.s
It 's my first message , I hope I used the correct section of the forum

Do you flash mm-firmware.zip?

for me it works sometimes and sometimes keep hanging " just vibrating without unlock " .. sometimes it says " hardware is not found "
i entered the recovery and flashed mm-firmware.zip again and the same problem exist ... i'm thinking to back to COS 12.1 it was working perfectly !

I have exactly the same problem, fingerprint option totally disappeared from my lockscreen settings. No idea how to fix it.

Shivver said:
I have exactly the same problem, fingerprint option totally disappeared from my lockscreen settings. No idea how to fix it.
Click to expand...
Click to collapse
when I'm looking for a setting, that I can't find in the settings dialog, I'm using the search function, there. This showed already quite some features.
I'm still on original Cyanogen OS 12.1 (5.1.1), though...
best regards
m

meikelrix said:
when I'm looking for a setting, that I can't find in the settings dialog, I'm using the search function, there. This showed already quite some features.
I'm still on original Cyanogen OS 12.1 (5.1.1), though...
best regards
m
Click to expand...
Click to collapse
Install mm firmware.zip
Sent from Zuk Z1 using Tapatalk

Same Problem here.. In cm13 official and Mr coldbirds Version.. Even with installing mmfirmware.zip

I have the same problem too. It have tested on official CM13 and om Mr.Colbird CM13 versions.

me too

the problem of vibrating that was because of third party app like " screen lock " but if you locked it with power button or double tap the fingerprint sensor will work perfectly :good:

I happen the same. Since I installed unofficial CM 13 (Mr. Coldbird) fingerprint sensor has disappeared.
I have even tried to solve it installing stock COS with qfil, but although the app has appeared again, the sensor doesn't work. I put the finger on it, but no signal arrives to the phone.
I have tried hard reset, install mmfimware, official CM 12 and 13, unofficial 13, but nothing work.
Any idea? Thanks.

Vfc73 said:
I happen the same. Since I installed unofficial CM 13 (Mr. Coldbird) fingerprint sensor has disappeared.
I have even tried to solve it installing stock COS with qfil, but although the app has appeared again, the sensor doesn't work. I put the finger on it, but no signal arrives to the phone.
I have tried hard reset, install mmfimware, official CM 12 and 13, unofficial 13, but nothing work.
Any idea? Thanks.
Click to expand...
Click to collapse
Try this method I have described earlier. It has recovered my Fingerprints already twice. Also because of trying unofficilal cm13. http://forum.xda-developers.com/showpost.php?p=64742948&postcount=2

Planet X said:
Try this method I have described earlier. It has recovered my Fingerprints already twice. Also because of trying unofficilal cm13. http://forum.xda-developers.com/showpost.php?p=64742948&postcount=2
Click to expand...
Click to collapse
I'll try and report. Thanks!!!

I've tries, but it hasn't worked.
Just one question, how do you exit fastboot mode?. I'm a beginner, sorry.

Vfc73 said:
I've tries, but it hasn't worked.
Just one question, how do you exit fastboot mode?. I'm a beginner, sorry.
Click to expand...
Click to collapse
Fastboot reboot or just press the power button until the phone shut down. I don't know went it didn't help you but i have recovered my fingerprint reader already twice with that procedure. You will lose nothing when just flashing the modem and the bootloader. My guess is that the persist.img is the partition you need to restore for the fingerprints. My fingerprint reader has been acted really crazy when i tried the unofficial cm13. Until it stopped working. I restored my backup and did the procedure to recover my fingerprint reader. I'm now on self built odexed cm13 nightly 's with working fingerprint reader.

Stopped working here too. Tried to restore COS but even if the setting is there, fingerprint doesn't get detected (phone keeps vibrating)

simoneser said:
Stopped working here too. Tried to restore COS but even if the setting is there, fingerprint doesn't get detected (phone keeps vibrating)
Click to expand...
Click to collapse
Read my post above. I have recovered two times from this issue. I had it also because of trying unofficial cm13. You will loose nothing but get back your fingerprints.

I have tried but it doesn't work
Inviato dal mio Z1 utilizzando Tapatalk

I have tried too, but it doesn't work.

Vfc73 said:
I have tried too, but it doesn't work.
Click to expand...
Click to collapse
Yesterday my fingerprint stopped again too. So I did the same procedure again and it didn't work anymore for me too. So I tried to flash the official cm13 again. First it didn't work but after a few minutes it started to work again. I really don't know how this is possible but there is one difference. The radio from official cm13 is newer than the one from COS. I'm happy that it works fine again but I'm afraid it will stop again when I try a different rom again.

A very unusual issue with the fingerprint scanner

I've had my phone for a few months now
I flashed the Skydragon 6.0.1 ROM yesterday and I wanted to move back to 5.1.1
So I did, I flashed the TWRP for 5.1.1 and I flashed the Stock OOS 2.2.0
But now, my home button works and Im able to register my fingerprint but after I selected use fingerprint to unlock it doesn't unlock
I've tried every solution on the Internet such as
1) Force stop com.oneplus.fingerprint and hard reset
2)Use software nav buttons
3)Factory reset
Nothing seems to work
I love the fingerprint feature in the OP2
Someone please help me out.
When I dialled *#808# and checked the finger print auto test and it said PASS
So Im sure its not a Hardware error

You should probably flash the old modem back. Can you please get into the security settings inside settings and tell me if you have a force close. If you get a force close you have to flash the old modem.
By saying modem I mean firmware. You can find it in OnePlus 2 Android development > taker18's cyanpop's second post.
Or in blissmallow thread second post.
Sent from my ONE A2003 using Tapatalk

I have the exact opposite issue. My FPS works with all ROMs except H2OS 6.0.1. Let me know if you find a solution. Might help me fix my problem.

kane1234 said:
I've had my phone for a few months now
I flashed the Skydragon 6.0.1 ROM yesterday and I wanted to move back to 5.1.1
So I did, I flashed the TWRP for 5.1.1 and I flashed the Stock OOS 2.2.0
But now, my home button works and Im able to register my fingerprint but after I selected use fingerprint to unlock it doesn't unlock
I've tried every solution on the Internet such as
1) Force stop com.oneplus.fingerprint and hard reset
2)Use software nav buttons
3)Factory reset
Nothing seems to work
I love the fingerprint feature in the OP2
Someone please help me out.
When I dialled *#808# and checked the finger print auto test and it said PASS
So Im sure its not a Hardware error
Click to expand...
Click to collapse
I had the same problem. Do a wipe then flash this it worked for me
https://drive.google.com/file/d/0B97c1b2UXMxCZkh3T0VzSmlCWms/view?usp=docslist_api
Sent from my ONE A2003 using Tapatalk

Thanks guy, I fixed the problem by flashing a persist.img

always reboot while recharging

hi
can anyone help me as it started to annoy me
when ever i put my phone on charger for a while it will reboot by itself so everytime i charge my phone over night when i wake up i have to enter
my pattern code and wifi or data or any notification will be off until i enter my pattern code.
i'm rooted using stock ROM and stock Kernel and updated to 4.5.14
thanks,

Did you activate the automatic boot or switch of ?

mr.alawi said:
hi
can anyone help me as it started to annoy me
when ever i put my phone on charger for a while it will reboot by itself so everytime i charge my phone over night when i wake up i have to enter
my pattern code and wifi or data or any notification will be off until i enter my pattern code.
i'm rooted using stock ROM and stock Kernel and updated to 4.5.14
thanks,
Click to expand...
Click to collapse
Do you have Xposed? It is a known issue for early versions of Xposed for Nougat. The latest versions fixed this issue.
If you do not want to update Xposed, there is a module that fixes this issue https://forum.xda-developers.com/xposed/modules/mod-oos-background-dex-optimization-fix-t3687603
Sent from my OnePlus5 using XDA Labs

How to fix: I9505 touch doesnt response in recovery (TWRP) and also after boot

Hi,
I just changed from Stock ROM to latest lineage OS with TWRP. After installing some APPs, i figured out, when call comes in or out, display gets off (dark) and doesnt comes back easily. Now, touch doesnt response so I cant unlock with pattern. Booting to recovery doesnt give me touch response so I cant swipe for "allow changes".
How could i fix this? Maybe with flashing now Recovery or Kernel via Download Mode, but how to do? Thank u

I suggest flashing back to a completely stock ROM and start over.
The screen going black could be an indication of a problem with the proximity sensor. The touch could be a driver issue in the custom ROM.

Edit: Airdroid Mirror doesnt work to unlock pattern lock
audit13 said:
I suggest flashing back to a completely stock ROM and start over.
The screen going black could be an indication of a problem with the proximity sensor. The touch could be a driver issue in the custom ROM.
Click to expand...
Click to collapse
Thank u,
but i forgot to tell u there is working USB Debugging with working Airdroid. Befor the issue Airdroid Mirror works great (control movements and clicks via Windows AirDroid Tool), but now with the issue i cant unlock pattern lock with airdroid. No response while moving Finger/Mouse but function keys like home work in Airdroid and also at touch.
Any idea how to fix this special thing? Is this an proximity sensor error?

Martin_ger said:
Thank u,
but i forgot to tell u there is working USB Debugging with working Airdroid. Befor the issue Airdroid Mirror works great (control movements and clicks via Windows AirDroid Tool), but now with the issue i cant unlock pattern lock with airdroid. No response while moving Finger/Mouse but function keys like home work in Airdroid and also at touch.
Any idea how to fix this special thing? Is this an proximity sensor error?
Click to expand...
Click to collapse
Don't think the proximity sensor would be related to Android mirror.
Since you can't unlock the phone because the touch does not work, I would flash back to a stock ROM and check as many functions as possible. If the phone doesn't function properly on a stock ROM, it is unlikely to function properly on a custom ROM.

audit13 said:
I would flash back to a stock ROM and check as many functions as possible. If the phone doesn't function properly on a stock ROM, it is unlikely to function properly on a custom ROM.
Click to expand...
Click to collapse
I just flashed one of some stock roms,this one: I9505XXUGNG2_I9505OXAGNG2_DBT frome the thread "go back to stock rom" and did wipe data factory reset. It installed some apps, but then no touch is responding.
I did opened phone, reconnected all cables but no luck. How to bring back touch is working?

Try one of the stock roms from samsung-firmware.org that is specifically for the carrier that originally issued the phone.
Could the problem be a loose connection?

Same problem here. Its an Samsung S4, german version.
I tried the jfvelte-version from https://twrp.me/samsung/samsunggalaxys4valueedition.html and it works great. Touch-screen works like a charm. Maybe this info will help other users.

Fingerprint enrollment problem

Hi guys,
Recently, I have installed Arrow OS 9.0 and I was unable to enroll my fingerprint (But I can use my fp sensor as home button).
Currently I have flashed stock ROM and restored IMEI. I was able to use both my SIM slots and device name shows xt1643. Again, I was not able to enroll my fingerprint. The error message reads "INTERNAL ERROR, Sorry your fingerprint can not be enrolled due to internal error". But, after rooting my device i was able to use it as home button.
Is there any thing that i have missed? Or is my fp sensor gone?

askreddy2 said:
Hi guys,
Recently, I have installed Arrow OS 9.0 and I was unable to enroll my fingerprint (But I can use my fp sensor as home button).
Currently I have flashed stock ROM and restored IMEI. I was able to use both my SIM slots and device name shows xt1643. Again, I was not able to enroll my fingerprint. The error message reads "INTERNAL ERROR, Sorry your fingerprint can not be enrolled due to internal error". But, after rooting my device i was able to use it as home button.
Is there any thing that i have missed? Or is my fp sensor gone?
Click to expand...
Click to collapse
I am using Redmi Note 4 and facing same problem after flashing Aosp Extended Pie ....The fingerprint sensor wouldn't just work. As if it is dead
Tried deleting these files
Root/data/system/users/0/settings_fingerprint.xml
And
Root/data/system/users/0/fpdata/users.db
Now the files are gone and sensor is dead ....Works when Miui is flashed but dont know what is going wrong in custom Rom

marzipan sasquatch said:
I am using Redmi Note 4 and facing same problem after flashing Aosp Extended Pie ....The fingerprint sensor wouldn't just work. As if it is dead
Tried deleting these files
Root/data/system/users/0/settings_fingerprint.xml
And
Root/data/system/users/0/fpdata/users.db
Now the files are gone and sensor is dead ....Works when Miui is flashed but dont know what is going wrong in custom Rom
Click to expand...
Click to collapse
Thankyou brother for the info. But even after reverting back to stock rom, my fp sensor was not working properly. Maybe some of my vendor files were messed up.