Hellow everyone, I have a problem with kies, I wanted to install a Stock Marshmellow Firmware and I wanted to make sure that if something goes wrong I can just use the emergency recovery from kies, but I get an error says that The Device does support Firmware upgrade and initialization, I have looked everywhere and couldn't find any answers,
I got a Note 4 N910F
Hope you guys can help me.
P.S
The phone is brand new so I never flashed it or rooted it.
itschrisybaby6 said:
P.S
The phone is brand new so I never flashed it or rooted it.
Click to expand...
Click to collapse
Try a factory reset, and try Kies on a different computer. If that doesn't work, and it's really brand new, take it back and get it exchanged or a refund.
You got an error says that The Device does support Firmware upgrade and initialization... ? Or "does not support"?
---------- Post added at 06:54 AM ---------- Previous post was at 06:51 AM ----------
Did you run the Kies from Windows 7? If yes, make sure you have started the Kies with Admin privilege, please.
James_Watson said:
You got an error says that The Device does support Firmware upgrade and initialization... ? Or "does not support"?
---------- Post added at 06:54 AM ---------- Previous post was at 06:51 AM ----------
Did you run the Kies from Windows 7? If yes, make sure you have started the Kies with Admin privilege, please.
Click to expand...
Click to collapse
I get "Does not support Firmware upgrade and initialization"
I got windows 10 with UAC disabled.
And I don't own another PC
itschrisybaby6 said:
I get "Does not support Firmware upgrade and initialization"
I got windows 10 with UAC disabled.
And I don't own another PC
Click to expand...
Click to collapse
Try uninstalling Kies and Samsung drivers and reinstall. Try another USB cable and a different USB port. Try Samsung SmartSwitch. Failing all this, if it's a brand new phone, I would recommend going back to the seller and getting a refund/replacement.
Kinsman-UK said:
Try uninstalling Kies and Samsung drivers and reinstall. Try another USB cable and a different USB port. Try Samsung SmartSwitch. Failing all this, if it's a brand new phone, I would recommend going back to the seller and getting a refund/replacement.
Click to expand...
Click to collapse
I will try all of those steps, worst case scenerio I will demand another phone,
I got it from a store I know, so shouldn't be any problems.
Thanks a bunch appreciate the help.
itschrisybaby6 said:
I will try all of those steps, worst case scenerio I will demand another phone,
I got it from a store I know, so shouldn't be any problems.
Thanks a bunch appreciate the help.
Click to expand...
Click to collapse
1. Enter Download mode by pressing VOL DOWN + HOME + POWER buttons.
2. On PC download ODIN 3.10 and your default firmware from samfirmware or other sources.
3. Open Odin press PDA button and select your firmware downloaded before and click START.
4. Let it flash the stock rom and then you have a brand new working device.
I am planning to flash the stock Marshmellow that way, I have 5.0.1 currently, but I wanted to make sure i got a way back if something goes wrong, that is why i want either SmartSwitch or Kies to properly work.
Sent from my SM-N910F using XDA-Developers mobile app
Related
Hi all! This is the brand new rom for our magnificent tablet!
Take a look and tell us!
http://samsung-updates.com/device/?id=GT-N5110
arminrr said:
Hi all! This is the brand new rom for our magnificent tablet!
Take a look and tell us!
http://samsung-updates.com/device/?id=GT-N5110
Click to expand...
Click to collapse
the wrong threads!long ago about it we know
godraxe said:
the wrong threads!long ago about it we know
Click to expand...
Click to collapse
It was out today
godraxe said:
the wrong threads!long ago about it we know
Click to expand...
Click to collapse
read it carefully before you reply...this is official GT-N5110. and yes we know there's a leaked beta update flooding around...this one is real deal.
Problem with SNote!
edit: ok now snote is ok for me!
And what about pen accuracy? Is it fixed? And what kind of problem is there with S note?
I haven't test it yet, because of time. But @civato will do his rom taking this new official version as base.
This should be in General.
Reported so it can be put with all the other identical postings.
kable said:
This should be in General.
Reported so it can be put with all the other identical postings.
Click to expand...
Click to collapse
agreed and moved, please keep only threads of your own development work in the development section
... So does this work for the US version as well? Because it just shows the UK version.
mustbepbs said:
... So does this work for the US version as well? Because it just shows the UK version.
Click to expand...
Click to collapse
Works fine on mine. As long as the model number is the same, the firmware will work.
Hi i just downloaded this firmware,i just wanted to ask,do i need to root my 5110 note 8 tablet before flashing this firmware,i have download Odin 307 and i am running windows 7,is it just a matter of connecting my tablet to the computer via the usb lead and then starting the Odin program up and browse for the firmware and get Odin to flash my tablet,or do i still have to root the tablet first.
Anyone have a bug report?
Sent from my GT-N5110
garryrw said:
Hi i just downloaded this firmware,i just wanted to ask,do i need to root my 5110 note 8 tablet before flashing this firmware,i have download Odin 307 and i am running windows 7,is it just a matter of connecting my tablet to the computer via the usb lead and then starting the Odin program up and browse for the firmware and get Odin to flash my tablet,or do i still have to root the tablet first.
Click to expand...
Click to collapse
yes. you still need to root your tablet because offical 4.2.2 update removes all root stuff. Once you flashed 4.2.2 firmware, and if all goes, wait for at least 10-15 mins (let 4.2.2 settle cool down)...and then reboot into download mode, and using odin once more flash CF-Auto-Root tar file (search CF-Auto-Root for Note 8). this should re-root your device...
garryrw said:
Hi i just downloaded this firmware,i just wanted to ask,do i need to root my 5110 note 8 tablet before flashing this firmware,
Click to expand...
Click to collapse
You do not need to be rooted to flash anything via Odin.
---------- Post added at 08:36 AM ---------- Previous post was at 08:34 AM ----------
3L3C7R0 said:
Anyone have a bug report?
Sent from my GT-N5110
Click to expand...
Click to collapse
Everything seems to be working perfectly for me. Even resolved the momentary freezes I had on 4.1.2.
Very smooth so far.
Can't get PC to recognize the tablet
I downloaded and installed the Samsung drivers, I turned on USB debugging, I downloaded Odin 3.07 and the leaked 4.2.2 from UK and when I boot into odin, my PC does not recognize the tablet as being connected, but my PC makes the noise and shows that the samsung drivers have been installed successfully. Any ideas on how to get this to recognize my tablet. I am running windows 7 64 bit. I do have McAfee running and am unable to disable because this is my work PC.
Thanks
pstellato73 said:
I downloaded and installed the Samsung drivers, I turned on USB debugging, I downloaded Odin 3.07 and the leaked 4.2.2 from UK and when I boot into odin, my PC does not recognize the tablet as being connected, but my PC makes the noise and shows that the samsung drivers have been installed successfully. Any ideas on how to get this to recognize my tablet. I am running windows 7 64 bit. I do have McAfee running and am unable to disable because this is my work PC.
Thanks
Click to expand...
Click to collapse
You have to boot the tablet in download mode before plugging it into your computer.
cruise350 said:
You have to boot the tablet in download mode before plugging it into your computer.
Click to expand...
Click to collapse
I have done all of that. Sorry I wasn't clear on that. I have followed all the instructions of being able to do this. Once I am in download mode (Odin mode), I plug the tablet in and then open Odin 3.07. Odin 3.07 does not recognize the tablet. But I have installed all the samsung drivers and it shows they installed successfully. I may be having an issue on my laptop where my company has a policy where we cannot write to external hard drives or USB sticks (jump Drives).
I may need to do this from my home PC when I get home tomorrow.
Thanks for helping out.
Make sure you start odin first using administrative permission, then plug your note in after odin is up and running.
Sent from my SPH-L720 using Tapatalk 4
Jay Evans said:
You do not need to be rooted to flash anything via Odin.
---------- Post added at 08:36 AM ---------- Previous post was at 08:34 AM ----------
Everything seems to be working perfectly for me. Even resolved the momentary freezes I had on 4.1.2.
Very smooth so far.
Click to expand...
Click to collapse
I'm planning on using mobileOdin and keeping root when I get home from work. Has worked well for me in the past. We shall see what we shall see!
My phone is really jacked up. Nothing that I flash will stick. I can't boot into recovery to flash off my sd card. Does anyone know a code to get the emergency firmware repair to work on KIES? Or what model number to put in? I put SPL-720 adn JFLTESPR.... Neither works.
Did a quick search http://www.samsung.com/us/support/faq/FAQ00052703/61329 I don't know if that is any help. Never had this issue before
MrWicked1 said:
Did a quick search http://www.samsung.com/us/support/faq/FAQ00052703/61329 I don't know if that is any help. Never had this issue before
Click to expand...
Click to collapse
Yeah, that is directions that are available on KIES. I'm not getting a code though to start the repair, even though the screen on my phone says to connect to KIES and start the emergency firmware process. When I connect it the KES says it's not compatible.
hmmm You are positive you have the right Samsung drivers installed correct? I do kinda remember reading somewhere about this with someone else....also try different usb cords.
---------- Post added at 11:32 AM ---------- Previous post was at 11:27 AM ----------
try this also http://www.samsung.com/us/support/faq/FAQ00029015/29183
Maybe this will help you also http://www.youtube.com/watch?v=cQvaxWY3Dlg
I also remember reading this from someone else, but don't remember if there was a solution. If you can track down that thread, you may get more info.
In addition to trying other usb cables, also try different usb ports on your computer. I remember that from the OG epic days
Kies sucks for this, you are better off taking it into Sprint and letting the flash it for you. They should be able to do it for you without any hassle. Just make sure you go to one with a repair center.
Okay, so I'm trying to plug my Verizon Note 3 into my laptop in order to transfer some photos and videos. However, there's no "USB Connected" notification that shows up on the phone, and the computer only recognizes "Samsung Android," and the drivers for it fail to install. The phone DOES charge, though.
My phone is rooted, so I unrooted by reinstalling the NC4 kitkat build via Odin. This didn't change anything. I've looked everywhere, and people keep saying "Go to storage settings and set to MTP only," but I don't see that setting...anywhere.
Since I rooted my phone, I have all the Samsung USB drivers, and I even have Kies installed. Turning off USB Debugging does nothing.
Is there any way to fix this?
I need to use a standard usb cable rather than the note 3 cable for mine to work.
Sent from my Nexus 9 using Tapatalk 4
I had the same problem with no solution, i ended up uninstalling Towel Root and then doing a factory restore to get back the USB connection capability on my phone.
darkcompgeek said:
Okay, so I'm trying to plug my Verizon Note 3 into my laptop in order to transfer some photos and videos. However, there's no "USB Connected" notification that shows up on the phone, and the computer only recognizes "Samsung Android," and the drivers for it fail to install. The phone DOES charge, though.
My phone is rooted, so I unrooted by reinstalling the NC4 kitkat build via Odin. This didn't change anything. I've looked everywhere, and people keep saying "Go to storage settings and set to MTP only," but I don't see that setting...anywhere.
Since I rooted my phone, I have all the Samsung USB drivers, and I even have Kies installed. Turning off USB Debugging does nothing.
Is there any way to fix this?
Click to expand...
Click to collapse
Did you get the latest drivers from the Samsung website? I only ask because when I went to install a rom for the first time Odin wouldn't recognize my phone in download mode but did while I was booted up normally. Come to find out the drivers I was using that was linked on the page where I got instructions how to root and rom were old. I went onto the Samsung website and downloaded the latest drivers and all was well. Give it a shot.
rebdogg said:
Did you get the latest drivers from the Samsung website? I only ask because when I went to install a rom for the first time Odin wouldn't recognize my phone in download mode but did while I was booted up normally. Come to find out the drivers I was using that was linked on the page where I got instructions how to root and rom were old. I went onto the Samsung website and downloaded the latest drivers and all was well. Give it a shot.
Click to expand...
Click to collapse
Yeah, I've tried the USB drivers from Samsung's website. I also tried installing Kies. AFAIK, Kies automatically installs the latest drivers for Samsung devices, but when I plugged my phone into my computer, Kies wouldn't even recognize it. The new 4.4.4 update didn't fix the problem. Thanks for the suggestion though.
same prob here, also my camera is not working did u fix the problem? i test 3 different usb cables whit no luck! heeeelp please!
---------- Post added at 01:56 PM ---------- Previous post was at 01:47 PM ----------
laserbiz said:
I had the same problem with no solution, i ended up uninstalling Towel Root and then doing a factory restore to get back the USB connection capability on my phone.
Click to expand...
Click to collapse
hello, did this work for you? also is your camera working? thanks! how did you unroot? my phone isnt working in download mode either no recognizing
azteka88 said:
same prob here, also my camera is not working did u fix the problem? i test 3 different usb cables whit no luck! heeeelp please!
---------- Post added at 01:56 PM ---------- Previous post was at 01:47 PM ----------
hello, did this work for you? also is your camera working? thanks! how did you unroot? my phone isnt working in download mode either no recognizing
Click to expand...
Click to collapse
yes this worked for me... no problems with my camera... works fine, even got updated to 4.4.4 by verizon
laserbiz said:
yes this worked for me... no problems with my camera... works fine, even got updated to 4.4.4 by verizon
Click to expand...
Click to collapse
My problem is that i cant use usb to update and im not in the us to OTA update from verizon any other solution?
Hi guys,
I participated in the Samsung Beta programme after purchasing my Galaxy S8 last year and have since done a Factory Reset.
I have noticed that I am still getting the "This is Beta software" messages and I'm having more and more problems as time goes by.
Could you please tell me how I can go back to the original firmware, so that I can get rid of the beta version I can't seem to get rid of ?
Many thanks for any help,
Antony
addyap said:
Hi guys,
I participated in the Samsung Beta programme after purchasing my Galaxy S8 last year and have since done a Factory Reset.
I have noticed that I am still getting the "This is Beta software" messages and I'm having more and more problems as time goes by.
Could you please tell me how I can go back to the original firmware, so that I can get rid of the beta version I can't seem to get rid of ?
Many thanks for any help,
Antony
Click to expand...
Click to collapse
With the use of Odin and similar revision bootloader firmware for your carrier and device
Restore to stable firmware
1. First of all, backup all your data:
- with Smart Switch Mobile, you need a microsd or usb flash drive. Your OTG-Connector is required to connect the flash drive
- or you have to use Smart switch for pc. You need to perform a full data backup
2. Enable developer options and oem unlock
3. Download Odin for oreo https://mega.nz/#!l8RhzahQ!V8oBOJOEic7e50oCD7KlB4jQltEe8YrzX7s6WGFw_-8
4. Then download your firmware for your S8 model. I recommend Samfirm(https://forum.xda-developers.com/attachment.php?attachmentid=3803841) Just download Samfirm from this link and start it. (YOU NEED NET FRAMEWORK FOR THIS).
4.1 Enter your Model Number (e.g. SM-G950F) and your csc code (e.g. DBT for germany) at the bottom. Then let it search for an update.
4.2 Download the firmware it searched and tick decrypt automatically.
4.3 wait until it finishes to download
5. Unzip the downloaded file
6. Now start Odin and upload the 5 files to odin. (Delete the CSC_xx, you need HomeCSC)
7. Shutdown your phone if it is nearly fully charced like 50%
8. hold the vol(down)+bixby button+power button. If you get the warning screen, press vol(up) to pass it.
9. Connect your phone to your pc and click on start.
10. While it flashes your device, prepare your fingers for vol(up)+ bixby, but don’t press
11. Your device restarts if odin says pass. You will see an blue screen with an android robot and saying erasing. Now immediately, your prepared fingers should press the buttons (vol(up) and bixby). If the screen is balck hold as fast as you can the power button to let it start the android stock recovery.
12. In the recovery, perform a factory reset and afer that reboot your phone.
Your device should be on the stable firmware!!! If not reply!!
Hi,
Thanks for your answer. I have a Mac, not a PC.
Does the above still work?
Thank you,
Antony
Do you know Wine for mac. You can use this to run windows applications on mac
memreb1801 said:
Do you know Wine for mac. You can use this to run windows applications on mac
Click to expand...
Click to collapse
No I don't sorry. I'm not that technically good. I guess there is no simple solution for Mac ?
Thank you,
Antony
You can bootcamp your mac
---------- Post added at 05:36 PM ---------- Previous post was at 05:36 PM ----------
Or wine. It is easy... just install the application
Believe in you!!
memreb1801 said:
You can bootcamp your mac
---------- Post added at 05:36 PM ---------- Previous post was at 05:36 PM ----------
Or wine. It is easy... just install the application
Click to expand...
Click to collapse
Too complicated for me I'm afraid. I'll leave it. Thank you for your help!
No worries...
I wanted to update my s7 edge to oreo via odin. So, i think i just flash it bad (instead of put one archive in bl i put other in ap, idk things like that). so i saw it told me An error has occurred while updating the device
software. Use the emergency recovery function in Smart Switch. I tried flashing again the firmware in odin but it just stuck in initialization. I just tried in diferent version of odin nor switch mode.
I tried with diferent usb cable nor other usb port
When i try to recover it with switch mode it just tell that it cant because it isn´t compatible (I even put the s/n)
Could someone tell a alternative tool to odin?
Help please, i think im losing my s7
Btw, sorry for my bad english.
Don't worry it will be fixed restart using volume down-home-power buttons all together go back in odin mode and try to flash only AP
Yo ur English is fine.
What version is your phone?
What version firmware are you using? Where did you get it ?
What version of Odin?
There are only 2 ways.
Odin or OTA by your provider.
Lol i don't think the change to Oreo is worth this trouble. But since you're going down this rabbit hole, we can at least try to get you working phone in Oreo.
Eggleston11 said:
Yo ur English is fine.
What version is your phone?
What version firmware are you using? Where did you get it ?
What version of Odin?
There are only 2 ways.
Odin or OTA by your provider.
Lol i don't think the change to Oreo is worth this trouble. But since you're going down this rabbit hole, we can at least try to get you working phone in Oreo.
Click to expand...
Click to collapse
SM-G935F
I was at 7.1 version before i changed(it was already rooted). During i was flashing my phone, i was tryng to change to oreo´(8.0 Panama)
From sam firm(a program who download from sammobile)
The last one. Also i try with preview version.
I use odin and it just stuck in initialization
miguelpty2702 said:
SM-G935F
I was at 7.1 version before i changed(it was already rooted). During i was flashing my phone, i was tryng to change to oreo´(8.0 Panama)
From sam firm(a program who download from sammobile)
The last one. Also i try with preview version.
I use odin and it just stuck in initialization
Click to expand...
Click to collapse
Don't know about samfirm. Sam mobile download is pretty safe and good. Download again in case of corrupt download if you want to reuse your firmware. Ensure that your firmware is for G935F. Boot to download mode. Unzip the zip file and get md5. Put md5 firmware on Odin (latest version) in AP section. Plug phone to computer. Make sure it says "added". Then start process.
Below link will help.
https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Should work flawlessly. Let me know if this doesn't help. Sorry if it's too simple of an explanation. Would rather have you understand than not.
Eggleston11 said:
Don't know about samfirm. Sam mobile download is pretty safe and good. Download again in case of corrupt download if you want to reuse your firmware. Ensure that your firmware is for G935F. Boot to download mode. Unzip the zip file and get md5. Put md5 firmware on Odin (latest version) in AP section. Plug phone to computer. Make sure it says "added". Then start process.
Below link will help.
https://www.kingoapp.com/root-tutorials/how-to-flash-samsung-stock-rom-via-odin.htm
Should work flawlessly. Let me know if this doesn't help. Sorry if it's too simple of an explanation. Would rather have you understand than not.
Click to expand...
Click to collapse
The bad was just the corrupted archive from samfirm, i think
Oh, thanks man, it worked!
I thought i had losed man
really thankssss
Pls help me
Hello, everyone. I have a SM-G935F Galaxy s7 Edge. usb gate was broken and i started to change the software with odin. it was installed in half and I pushed the usb cable by mistake and the installation stopped. then a error appears on the screen: an error occurrd while updating the device software. i read a lot in the forums and i watched a lot of videos how to fix it but everywhere they describe and show that the phone needs to be restarted with the combination of buttons. my problem is that when i connect my phone to pc it says error: device is not recognized. I checked how to fix this error too, although I managed to fix the device manager in windows , the smart switch still does not detect the phone and the phone cannot restart with a combination of buttons. this phone is very expensive and i want to fix it at any cost. the phone is already with a new usb port, all you have to do is help me put the software on it. please help me very much.
---------- Post added at 12:08 AM ---------- Previous post was at 12:00 AM ----------
device currently stay off because not battery power. When I connect to charging cable phone is starting on blue screen with same error and not possible to off or restart the phone with buttons. Very strange
Try This : if not working you can check the guide how to here but you need to select the right one from here