Related
I work at a shop and someone brought me a Yoga Tab 3 8" tablet that was on a screen that asked for an original google account.
It was purchased without much thought because i figured it was just part of the setup.
No this is actually a Device Protection feature google has had since Lollipop apparently.
There is a way around it if anyone is interested or is in a soft brick that they can access the recovery from.
NOTE :
THIS IS FOR THE YOGA TAB 3 8" YT3-850F ONLY!!!!! I AM NOT RESPONSIBLE IF YOU DESTROY YOUR TABLET! PLEASE BE CAREFUL. DO NOT FLASH ANYTHING FOR WRONG MODEL. CONFIRM YOUR MODEL NUMBER BY LOOKING ON THE BACK STICKER BEFORE PROCEEDING.
You will need :
A Computer
A Micro SD Card and Adapter
A couple of hours time
Patience...
Patience........
Firstly, as always, make sure the device is charged before attempting any of this please.
Download the stock firmware from This Link.
Do not extract the firmware at all or rename it, just leave it as it is, it will take about an hour to download.
After you have the firmware downloaded move the zip file to the root of the MicroSD Card on the computer.
Eject the SDCard from the computer and put it into the Yoga Tab.
Reboot into recovery by pressing Power and Vol+ let go of Power when you see the Lenovo logo.
Once in recovery go ahead and do a factory reset/data wipe.
The next step is to actually flash the zip you put on the MicroSD earlier. You go down to apply update from SD using the Volume + and -
buttons. Power to select an option. Select the Zip you downloaded from this guide.
it will take approximately 20-30 minutes to fully install the update. after it installs it will boot up like new again, with no Google Device Protection, and it is a possible way to unbrick!
Hello, Where did you find this firmware? I'm looking for Lenovo Yoga Tab 3 YT3-X50F. Thanks
crucito said:
Hello, Where did you find this firmware? I'm looking for Lenovo Yoga Tab 3 YT3-X50F. Thanks
Click to expand...
Click to collapse
It looks like a modified package from China. I successfully installed the zip file. After rebooting, the version noted was YT3-X50F_S000022_150714_PRC (which I presumed to be People's Republic of China). The update zip does not contain any Google apps (including Play Store).
spunky168 said:
It looks like a modified package from China. I successfully installed the zip file. After rebooting, the version noted was YT3-X50F_S000022_150714_PRC (which I presumed to be People's Republic of China). The update zip does not contain any Google apps (including Play Store).
Click to expand...
Click to collapse
That's correct; but you can just flash the Gapps 5.1.1 ("mini" package) from Cyanogenmod (that's what I did); and then once you've got superSU installed, remove the non-North American "store" apps ^_^
crucito said:
Hello, Where did you find this firmware? I'm looking for Lenovo Yoga Tab 3 YT3-X50F. Thanks
Click to expand...
Click to collapse
on the lenovo support page...
Yes
metalchef said:
That's correct; but you can just flash the Gapps 5.1.1 ("mini" package) from Cyanogenmod (that's what I did); and then once you've got superSU installed, remove the non-North American "store" apps ^_^
Click to expand...
Click to collapse
Sorry for the delay in my response, but yes, this is correct. Just flash the Google apps and you will be good to go. I'm not sure where I found the firmware but there is a link there to the download. I'm pretty sure I just dug around google alot and found a post to the firmware somewhere else on XDA but to tell you the truth it was actually really difficult for me to get google apps installed and working properly and this firmware sometimes would not flash it would just sit there saying opening update.zip for hours. Good thing the battery life on that thing was amazing. :laugh:
metalchef said:
That's correct; but you can just flash the Gapps 5.1.1 ("mini" package) from Cyanogenmod (that's what I did); and then once you've got superSU installed, remove the non-North American "store" apps ^_^
Click to expand...
Click to collapse
Never mind
Does anyone have a fix if the tablet is stuck after a custom boot
does anyone know where to find Lenovo YT3 X50M stock rom? im looking for it for days, but no luck. can someone help me find one please. my tablet is softbrick right now
Yoga Tab 3 firmware legit download sites
PhidzkiDoo said:
does anyone know where to find Lenovo YT3 X50M stock rom? im looking for it for days, but no luck. can someone help me find one please. my tablet is softbrick right now
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=67534307&postcount=142
metalchef said:
That's correct; but you can just flash the Gapps 5.1.1 ("mini" package) from Cyanogenmod (that's what I did); and then once you've got superSU installed, remove the non-North American "store" apps ^_^
Click to expand...
Click to collapse
I got root on my device, but I don't know how to flash gapps on this device, because I don't have a custom recovery, can you pls help me?
alekzzone said:
I got root on my device, but I don't know how to flash gapps on this device, because I don't have a custom recovery, can you pls help me?
Click to expand...
Click to collapse
For several days straight I tried every method I could find on the internet to install Gapps on my YT3-850M without a custom recovery and every single attempt failed. I can do it without root but not without TWRP.
You don't happen to have the stock rom for yt3-x50f laying around?
Yoga tab 3 pro
Can please someone help me and direct me on right track. I have Yoga Tab 3 Pro but i bought it in China and all my apps and software is on China... is there a way for me to have english software and Google Store on it??? Pls if someone can just tell me where to start i payed a lot of money for it and i cant even use it properly...
stock
Anonymous629 said:
Does anyone have a fix if the tablet is stuck after a custom boot
Click to expand...
Click to collapse
If it is bootlooping just restore the stock firmware, surefire way to unbrick.
YES!
shile86 said:
Can please someone help me and direct me on right track. I have Yoga Tab 3 Pro but i bought it in China and all my apps and software is on China... is there a way for me to have english software and Google Store on it??? Pls if someone can just tell me where to start i payed a lot of money for it and i cant even use it properly...
Click to expand...
Click to collapse
What is the model number ? I can help you
Starting Point
JamesHasty said:
What is the model number ? I can help you
Click to expand...
Click to collapse
A good starting point for this is to look into rooting and get a custom recovery. Then you can flash zip files, such as google play store.
mathewcall said:
For several days straight I tried every method I could find on the internet to install Gapps on my YT3-850M without a custom recovery and every single attempt failed. I can do it without root but not without TWRP.
Click to expand...
Click to collapse
You can flash the TWRP for the x50M and then install google apps. The recovery will not stay - it will revert back to stop recovery. Search XDA for TWRP-2.8.7.7_YT3-X50M.zip
Recover, install recovery, root
BEFORE ANYTHING.... unlock your bootloader
Install Drivers for Lenovo Tablet, So Adb can see your device
Open your Adb Command Windows (windows)
Commands!
Adb Devices ------- this should return a device Id # ... if it doesn't your drivers are not correct ....
Adb Reboot bootloader -------- this Should take you to the Big Lenovo Screen (it will stay there, this is fastboot mode)
Fastboot Devices ------- This Should Return The Device Id (except fastboot Device Id #)
Fastboot Oem unlock-go ------- This Should Unlock Your bootloader (allow flashing of custom firmwares, boot images, recoverys etc) THIS WILL WIPE YOUR DEVICE!!!!!!!!!
After unlocking bootloader
Flash this Stock Firmware (if you haven't already)
This is FULL STOCK FIRMWARE ... not an OTA zip...
Downloads - Lenovo firmware YT3-850F | Easy Firmware
easy-firmware.com
Custom Built TWRP by Me... Enjoy
https://drive.google.com/file/d/0B1d...ew?usp=sharing
(this was based off the Twrp source that metalchef mentioned)
I recommend BOOTING it through fastboot if your only planning on flashing a few things and taking a single backup here and there... if you flash zips ALOT ... then just flash it ...
Fastboot Boot Recovery.img (this is the command you need inside of fastboot for booting recovery)
Fastboot flash recovery recovery.img (this is to flash recovery to tablet)
#Note# you need to put the recovery.img inside your adb folder... or drag and drop it to command window after typing "fastboot boot"
This will allow it to boot from any file path ....
To Gain Root ... Use Kingoroot , Un-intall the Superuser that kingoroot gives you ... get supersu (chainfire) from market and update the binary....
or flash supersu.zip through recovery
( I haven't tried to flash supersu because kingoroot worked) and ive exhausted so much time on the recovery ... im going to take a break ...
Afterwards .... You SHOULD have the device your seeking....
metalchef said:
That's correct; but you can just flash the Gapps 5.1.1 ("mini" package) from Cyanogenmod (that's what I did); and then once you've got superSU installed, remove the non-North American "store" apps ^_^
Click to expand...
Click to collapse
Hi Spungy168,
Please, how did you go about the flashing. Can you send me that tools & how? My tab Lenovo yoga 3 850F is bricked, please help?
After installing MedroM I got this problem and couldn't connect to google account and every google app would crash if I tried to log in, so I flashed b161 and I still have this problem, even after numerous factory resets, has this ever happened to anyone ?
Yes, it is happening to other guys around here...
In fact is happening to all who flash B160/B161 firmware...
Is not possible to flash any firmware previously to B160/B161.
Workaround is to unlock bootloader, flash twrp, root it, reflash oeminfo for your device,
and after that you can flash another firmware again.
gtdaniel said:
Yes, it is happening to other guys around here...
In fact is happening to all who flash B160/B161 firmware...
Is not possible to flash any firmware previously to B160/B161.
Workaround is to unlock bootloader, flash twrp, root it, reflash oeminfo for your device,
and after that you can flash another firmware again.
Click to expand...
Click to collapse
i'm in the same situation, i tried to do what you've said, but twrp says that the installation failed. how can I have play store working again? please help, this situation is driving me crazy!
i'm on c900 b161.
I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
After 2 days of trying different stuff, here's what gave me a functional device with TWRP and Root back:
-Back up any data you want to keep, obviously.
-Reflash stock ROM (put UPDATE.APP on your dload/ folder on the separate SD card, then boot into the update function by turning the phone off and then holding Vol+, Vol-, Power. Just wait until it's finished.
-Unlock Bootloader again
-Download the Toolkit: http://forum.xda-developers.com/huawei-p9lite/development/europe-vns-l31-toolkit-bootloader-t3432873
-Flash TWRP through the toolkit
-Boot TWRP and root
-In Android, enable ADB
-In the Toolkit, go to Dual Sim>Individual and select the appropriate custom.bin and oeminfo.img from the thread of the toolkit. For my European one it was L31 SS C432. Press flash and grant Root permissions on your phone.
-Turn off your phone and flash the stock ROM again like in step 1.
-If you want root, you need to unlock the Bootloader again, flash TWRP and then root it from there.
DON'T WIPE ANYTHING IN TWRP OR YOU WILL HAVE TO START ALL OVER AGAIN!
Don't ask me how I know.
Hope this saves someone from wasting their time with this nonsense like I have.
No need to touch the oem stuff, just extract the boot.img and system.img and flash through adb, for dat you need bootloader unlocked and fastboot drivers then you can downgrade firmware and fix your sign problem or just wait for a new firmware
raffabraz said:
No need to touch the oem stuff, just extract the boot.img and system.img and flash through adb, for dat you need bootloader unlocked and fastboot drivers then you can downgrade firmware and fix your sign problem or just wait for a new firmware
Click to expand...
Click to collapse
That would be much simpler, I didn't consider that. Would you mind writing up a guide?
I've had the same issue and have resolved it pretty easily,
i did the following steps ;
- download both medrom versions
- do full factory reset
- install medrom v1
- do all settings of google etc
- reboot recovery and install v2
- wipe dalvik and reboot
-- all works now except for the forceclose on facebook
ps : this answer is also in the thread ( not as extended as this but it's there )
Edit : some other apps are Force closing to, my guess is that there's a shared resource of some kind that's corrupted or something..
sirlex said:
I've had the same issue and have resolved it pretty easily,
i did the following steps ;
- download both medrom versions
- do full factory reset
- install medrom v1
- do all settings of google etc
- reboot recovery and install v2
- wipe dalvik and reboot
-- all works now except for the forceclose on facebook
ps : this answer is also in the thread ( not as extended as this but it's there )
Edit : some other apps are Force closing to, my guess is that there's a shared resource of some kind that's corrupted or something..
Click to expand...
Click to collapse
Force closing is caused by the oeminfo in my experience. Can you check in the "About Phone" section which build number your phone currently has? Should be something along the lines of "VNS-L31C432B161" where C432 indicates the region code.
since I am Running MEDROM v2 it shows just that. However , I do know it is based on b161
HeavyHDx said:
I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
After 2 days of trying different stuff, here's what gave me a functional device with TWRP and Root back:
-Back up any data you want to keep, obviously.
-Reflash stock ROM (put UPDATE.APP on your dload/ folder on the separate SD card, then boot into the update function by turning the phone off and then holding Vol+, Vol-, Power. Just wait until it's finished.
-Unlock Bootloader again
-Download the Toolkit: http://forum.xda-developers.com/huawei-p9lite/development/europe-vns-l31-toolkit-bootloader-t3432873
-Flash TWRP through the toolkit
-Boot TWRP and root
-In Android, enable ADB
-In the Toolkit, go to Dual Sim>Individual and select the appropriate custom.bin and oeminfo.img from the thread of the toolkit. For my European one it was L31 SS C432. Press flash and grant Root permissions on your phone.
-Turn off your phone and flash the stock ROM again like in step 1.
-If you want root, you need to unlock the Bootloader again, flash TWRP and then root it from there.
DON'T WIPE ANYTHING IN TWRP OR YOU WILL HAVE TO START ALL OVER AGAIN!
Don't ask me how I know.
Hope this saves someone from wasting their time with this nonsense like I have.
Click to expand...
Click to collapse
Thank you so much , you saved my phone !!
Fllashing stock rom again isnt necessary , just flash the oeminfo, reboot, they will tell you an encryption password, so you have to do a factory reset AND DONE !
simo255 said:
Thank you so much , you saved my phone !!
it doesn't need to reflash stock rom again, just flash the oeminfo, reboot, they will tell you an encryption password, so you have to do a factory reset AND DONE !
Click to expand...
Click to collapse
Interesting, when I tried to do a factory reset after that screen, it always failed.
HeavyHDx said:
Interesting, when I tried to do a factory reset after that screen, it always failed.
Click to expand...
Click to collapse
You have to flash the stock recovery to do a Factory reset
medRom v2 fix
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.
Could someone provide me the correct oeminfo and custom.bin for a European/German model? C432? The images inlcuded in the toolkit don't work for me, it still crashes or can't communicate with the google server
Deddline said:
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.
Click to expand...
Click to collapse
Installing Android System Web View apk from apkmirror solved the problem for me (arm + x86 package). Thank you
HeavyHDx said:
I had the same issue. I did a clean flash of the new 161 update and that made my device a C900. I have a Eurpoean model (T-Mobile Germany).
Click to expand...
Click to collapse
I got my P9 Lite from Congstar in Germany. I didn't knew, that the device would be branded by Telekom. I flashed the B161 and couldn't connect to any google account. Thankfully updating the webview apk via apk mirror solved this problem. But this leaves me with 2 questions and maybe you could answer these...?
1) Do you know which stock rom would work the best with my device (VNS-L31 without the possibility to use two sim cards ) and where I could download this stock rom.
2) Is the B161 supposed to work fine after solving this issue or are there other problems with it?
I would be really happy if someone of you could help me. :good:
MartinMo said:
1) Do you know which stock rom would work the best with my device (VNS-L31 without the possibility to use two sim cards ) and where I could download this stock rom.
2) Is the B161 supposed to work fine after solving this issue or are there other problems with it?
Click to expand...
Click to collapse
1) The best stock ROM would either be, well, the stock ROM, or the Revolution ROM.
2) I've had some strange behavior with Relay for Reddit and frequent crashes of WhatsApp when sending messages. Right now I'm on Lineage OS 14.1 and it's really great. Camera's a bit slow, but otherwise I love it. I missed stock Android.
HeavyHDx said:
1) The best stock ROM would either be, well, the stock ROM, or the Revolution ROM.
Click to expand...
Click to collapse
Isn't Nougat still a beta...? I'm looking for a stable stock version of EMUI...
HeavyHDx said:
2) I've had some strange behavior with Relay for Reddit and frequent crashes of WhatsApp when sending messages. Right now I'm on Lineage OS 14.1 and it's really great. Camera's a bit slow, but otherwise I love it. I missed stock Android.
Click to expand...
Click to collapse
Thank you, tomorrow I'll test if Whatsapp working fine or not, that's important for me. Is Lineage 14.1 the most stable Lineage version?
Nougat is still in beta, yes. The full version is expected to come out within the next few weeks.
14.1 refers to the Android version which is 7.1.1. They adopted CyanogenMod's naming scheme. You'll still need to update LineageOS to get bugfixes and such. The dev releases a new update every 2 or 3 days, just check their website periodically.
Deddline said:
Hi all.
I think i found solution for Google login issue.
I use European VNS-L21-C432B161 dual sim phone with lattest rom.
I flashed medRom v2 with full wipes.
Ofcourse i Can not log in Google Services.
Today i download 3 Google apk files. Installed and it works.
Sorry. I cant post ling on XDA now.im newbie
Link in My profils.
There is instruction how i do:
1. Installed Gmail apk and login.
2. Installed Android System Web Wiev apk.
3. Installed Google Play Service apk
Proof: in My profils description in Youtube
Download Files: watch in YOUTUBE description.
Hope helps for someone.
Click to expand...
Click to collapse
Installed Android System Web Viev .apk did the trick for me, too. muchos gracias.
I have a XT1572 (Indian variant dual sim) . The sim card works good on both 6.0 & 7.0 (official roms) however remains undetected on any custom rom . Any guidance would be of great help .
Using magisk? It will cause that. Flash magisk uninstaller and reboot system once before flashing a new rom.
Tried but no success
jason2678 said:
Using magisk? It will cause that. Flash magisk uninstaller and reboot system once before flashing a new rom.
Click to expand...
Click to collapse
So I was on stock mm , had magisk -uninstalled and rebooted afterwards . Installed RRemix(RR-N-v5.8.5-20171230-clark-Final) . Again no sim . Attaching two screen shots for your reference .
One thing to note I have a dual sim variant and under all custom roms imei of only one is being displayed .
This whole thing is very strange since I could run Lineage very easily on the same phone sometime back , roughly around Oct'17 . Used the phone on stock nougat afterwards .
Anyone ?
Sir2taj said:
So I was on stock mm , had magisk -uninstalled and rebooted afterwards . Installed RRemix(RR-N-v5.8.5-20171230-clark-Final) . Again no sim . Attaching two screen shots for your reference .
One thing to note I have a dual sim variant and under all custom roms imei of only one is being displayed .
This whole thing is very strange since I could run Lineage very easily on the same phone sometime back , roughly around Oct'17 . Used the phone on stock nougat afterwards .
Click to expand...
Click to collapse
@antariksh
I am very well aware of the fact that lineage would not run on nougat modem. Have tried aicp rremix unofficial lineage etc . The issue remains the same no sim detected .
What I have done for installation -
fastboot install marshmallow/nougat build (depending upon the custom rom)
flash latest twrp
in twrp factory reset (don't mount/unmount anything, all default)
rom boots but doesnt detect any sim .
details of only one imei of the two is displayed under about phone .
Sir2taj said:
@antariksh
I am very well aware of the fact that lineage would not run on nougat modem. Have tried aicp rremix unofficial lineage etc . The issue remains the same no sim detected .
What I have done for installation -
fastboot install marshmallow/nougat build (depending upon the custom rom)
flash latest twrp
in twrp factory reset (don't mount/unmount anything, all default)
rom boots but doesnt detect any sim .
details of only one imei of the two is displayed under about phone .
Click to expand...
Click to collapse
Have you tried this version with this guide?
P.S: Nougat has 9 system.img_sparsechunk's. So flash accordingly and then try any other custom ROMs.
P.P.S: Flash Modem twice if you get any 'prevalidation failed error'
antariksh said:
Have you tried this version with this guide?
P.S: Nougat has 9 system.img_sparsechunk's. So flash accordingly and then try any other custom ROMs.
P.P.S: Flash Modem twice if you get any 'prevalidation failed error'
Click to expand...
Click to collapse
Will try the guide and get back to you
Update
Tried each and every step as per your suggestions . No change .
The phone is failing to recognize sims on all custom roms .
Sir2taj said:
Will try the guide and get back to you
Update
Tried each and every step as per your suggestions . No change .
The phone is failing to recognize sims on all custom roms .
Click to expand...
Click to collapse
@antariksh pls help
Sir2taj said:
@antariksh pls help
Click to expand...
Click to collapse
I'm afraid it must be your device issue.
Cause last week I followed the same steps to Flash Stock Nougat and went back to NucleaROM.
You sure you are using Nougat Modem based Custom ROMs?
antariksh said:
I'm afraid it must be your device issue.
Cause last week I followed the same steps to Flash Stock Nougat and went back to NucleaROM.
You sure you are using Nougat Modem based Custom ROMs?
Click to expand...
Click to collapse
Very very strange because I do recall that all these custom ROMs used to run fine without any such stupid issues back in October last year . its really disheartening. Yes I am using nougat firmwares for nougat modem compatible ROMs and mm firmware for rhe mm compatible one's . Its just that be it any custom ROM this thing won't work at all ! Is it anyhow related to recovering phone from brick state because I do remember that I had to flash the bootloader on a memory card in order to get the device up ?
Appreciate your efforts brother.
i have similar problem
antariksh said:
Have you tried this version with this guide?
P.S: Nougat has 9 system.img_sparsechunk's. So flash accordingly and then try any other custom ROMs.
P.P.S: Flash Modem twice if you get any 'prevalidation failed error'
Click to expand...
Click to collapse
HI there , I hope my constant requests aren't bothering . If they are kindly let me know & I shall refrain in future .
I just realised one thing . On installing nougat fastboot file from " https://forum.xda-developers.com/moto-x-style/general/xt1572firmwareclarkretasiaindiads7-t3735257" as per suggestions I get model as XT 1572 on connection to PC . Although in recovery mode when connected (twrp) the same pc recognizes the phone as XT1575 . Is it normal ?
Sir2taj said:
HI there , I hope my constant requests aren't bothering . If they are kindly let me know & I shall refrain in future .
I just realised one thing . On installing nougat fastboot file from " https://forum.xda-developers.com/moto-x-style/general/xt1572firmwareclarkretasiaindiads7-t3735257" as per suggestions I get model as XT 1572 on connection to PC . Although in recovery mode when connected (twrp) the same pc recognizes the phone as XT1575 . Is it normal ?
Click to expand...
Click to collapse
Yep. It is normal. TWRP was probably based out on XT1575. But it doesn't matter.
Only modems differ between XT1575 and XT1572.
Flash the MM firmware, make sure the modem has no validation issues, then flash the custom ROM you want. Flashing with Nougat firmware won't allow boots. Also, sometimes the MM firmware just doesn't work, and flashing stock firmware will "rejuvenate" it.
parker.stephens said:
Flash the MM firmware, make sure the modem has no validation issues, then flash the custom ROM you want. Flashing with Nougat firmware won't allow boots. Also, sometimes the MM firmware just doesn't work, and flashing stock firmware will "rejuvenate" it.
Click to expand...
Click to collapse
I wanted to try installing it on 6.0 . The install process didn't initiate saying that the bootloader (A**52) isnt compatible.
Plus I noted that on downgrading to 6.0 from 7.0 the loader and gpt bin gave failure errors in fastboot.
Sir2taj said:
I wanted to try installing it on 6.0 . The install process didn't initiate saying that the bootloader (A**52) isnt compatible.
Plus I noted that on downgrading to 6.0 from 7.0 the loader and gpt bin gave failure errors in fastboot.
Click to expand...
Click to collapse
GPT is not downgradeable and it doesn't need to flash successfully. Also, one you are on 0xA052 firmware, you can't go back, but you can edit the rom's files and make it skip the bootloader check. This is a quote of myself on how to do that from the LOS thread,
"Extract the ROM zip into it's own subdirectory. Then go into the folder META-INF, then com, then google, android, then open updater-script in a text editing program. I prefer Notepad++. Locate the line that says assert getprop ro.bootloader. Should be line 2. You can either add your bootloader by copying another item, or this is easier, edit a line already there, such as "|| getprop("ro.bootloader") == "0xA048" ||" and replace 0xA048 with 0xA052 or the bootloader your device has. Then save it by going to the root folder, not the folder labeled "lineage-14.1-xxxxxxxx-nightly-clark-signed", but the folder with the folders install, META-INF, system, and etc. Select everything by dragging your cursor over all the files, then right-click, send-to, compressed zip. Name it anything, then copy it to your device however you prefer, I just sideloaded it in TWRP. If you get an error talking about a digest file, you might have accidentally deleted something you shouldn't have."
parker.stephens said:
GPT is not downgradeable and it doesn't need to flash successfully. Also, one you are on 0xA052 firmware, you can't go back, but you can edit the rom's files and make it skip the bootloader check. This is a quote of myself on how to do that from the LOS thread,
"Extract the ROM zip into it's own subdirectory. Then go into the folder META-INF, then com, then google, android, then open updater-script in a text editing program. I prefer Notepad++. Locate the line that says assert getprop ro.bootloader. Should be line 2. You can either add your bootloader by copying another item, or this is easier, edit a line already there, such as "|| getprop("ro.bootloader") == "0xA048" ||" and replace 0xA048 with 0xA052 or the bootloader your device has. Then save it by going to the root folder, not the folder labeled "lineage-14.1-xxxxxxxx-nightly-clark-signed", but the folder with the folders install, META-INF, system, and etc. Select everything by dragging your cursor over all the files, then right-click, send-to, compressed zip. Name it anything, then copy it to your device however you prefer, I just sideloaded it in TWRP. If you get an error talking about a digest file, you might have accidentally deleted something you shouldn't have."
Click to expand...
Click to collapse
Will give it a try
parker.stephens said:
GPT is not downgradeable and it doesn't need to flash successfully. Also, one you are on 0xA052 firmware, you can't go back, but you can edit the rom's files and make it skip the bootloader check. This is a quote of myself on how to do that from the LOS thread,
"Extract the ROM zip into it's own subdirectory. Then go into the folder META-INF, then com, then google, android, then open updater-script in a text editing program. I prefer Notepad++. Locate the line that says assert getprop ro.bootloader. Should be line 2. You can either add your bootloader by copying another item, or this is easier, edit a line already there, such as "|| getprop("ro.bootloader") == "0xA048" ||" and replace 0xA048 with 0xA052 or the bootloader your device has. Then save it by going to the root folder, not the folder labeled "lineage-14.1-xxxxxxxx-nightly-clark-signed", but the folder with the folders install, META-INF, system, and etc. Select everything by dragging your cursor over all the files, then right-click, send-to, compressed zip. Name it anything, then copy it to your device however you prefer, I just sideloaded it in TWRP. If you get an error talking about a digest file, you might have accidentally deleted something you shouldn't have."
Click to expand...
Click to collapse
Iam gettign error 6 . Pls share the edited updater script for bootloader - A0.52
I've got exactly the same issue.... Sim not detected on Nougat, can't boot Marshmallow roms.
Someone found a fix to this?
Perhaps I'm not the only one having the issue of no sim
Sir2taj said:
Perhaps I'm not the only one having the issue of no sim
Click to expand...
Click to collapse
i have the same issue my friend and i dont know what to do.
Hello!
I have unlocked the bootloader of my Mate 10 lite and proceeded to flash TWRP and Magisk onto the device. But in doing so, I get an awful looking screen when I boot the device, so I thought I should relock the bootloader, now that TWRP has been flashed.
...I immediately regretted relocking the bootloader, as the system was inaccessible until I re-unlocked the bootloader and was able to access TWRP and the system again. So my question is, can you lock the bootloader with TWRP installed and still access the system?
Also, if I want to go back to full-stock, I have to download a stock ROM for the system from firmwarefinder and flash it with some tool, correct?
Tsun_Pooka said:
So my question is, can you lock the bootloader with TWRP installed and still access the system?
Click to expand...
Click to collapse
Unfortunately, it's impossible...
You can flash Stock ROM for the system from firmwarefinder (fullOTA-MF only!) using HwOTA, HuRupdater, Huawei Multi-tool (RUFI).
If You want to go back to full-stock with locked bootloader (not re-locked) , You have to flash Service ROM from dload (this process will erase all the data from your device!).
Tsun_Pooka said:
Hello!
I have unlocked the bootloader of my Mate 10 lite and proceeded to flash TWRP and Magisk onto the device. But in doing so, I get an awful looking screen when I boot the device, so I thought I should relock the bootloader, now that TWRP has been flashed.
...I immediately regretted relocking the bootloader, as the system was inaccessible until I re-unlocked the bootloader and was able to access TWRP and the system again. So my question is, can you lock the bootloader with TWRP installed and still access the system?
Also, if I want to go back to full-stock, I have to download a stock ROM for the system from firmwarefinder and flash it with some tool, correct?
Click to expand...
Click to collapse
How you unlock the bootloader?
bozka1 said:
Unfortunately, it's impossible... If You want to go back to full-stock with locked bootloader (not re-locked) , You have to flash Service ROM from dload (this process will erase all the data from your device!).
Click to expand...
Click to collapse
Thanks for the tips! By the way, what is dload? If it's a website, I cant find it (the fact that dload is short of "download" doesn't really help). I am now in need of that full-stock ROM.
Tsun_Pooka said:
By the way, what is dload?
Click to expand...
Click to collapse
https://forum.xda-developers.com/mate-10/help/formatting-dload-method-t3815949/page2
Whew. I got the bootloader AND FRP locked on me, and now I don't have a usable system. So now, I have to rely on eRecovery to download a 3GBs package and hope all things go well...the problem is, I'd need to find a place that offers fast WiFi...my internet is terrible.
EDIT: Got the system back up thanks to eRecovery. I'm not sure if I want to root or install a custom recovery on the Lite. I've realized even more that I should cherish my older phone, my Samsung Galaxy Win. At least this one isn't complicated or protected by Fort KNOX.
When u play with custom roms, u appreciate the customization/optimizations offered by developers, thanks to them. But with the time, u always feel stock ROM was best for this n that reasons. Recent 2/3 times I was able to use Huru Updater to get back to Stock ROM and it worked well (needs TWRP installed, and you may need to switch to other TWRP if u get error from existing)
You seem to be a beginner, so I would suggest to get help from some friends who can do it for you. Or obviously u can try ur self again and again, and learn good things until something finally works for u. You were able to relock bootloader so it means u have the code for ur device for locking/unlocking, save this code on at least 2 different places (email, google drive, dropbox etc.). Then u can easily unlock ur device again, and install Stock ROM etc.
usman400 said:
When u play with custom roms, u appreciate the customization/optimizations offered by developers, thanks to them. But with the time, u always feel stock ROM was best for this n that reasons. Recent 2/3 times I was able to use Huru Updater to get back to Stock ROM and it worked well (needs TWRP installed, and you may need to switch to other TWRP if u get error from existing)
You seem to be a beginner, so I would suggest to get help from some friends who can do it for you. Or obviously u can try ur self again and again, and learn good things until something finally works for u. You were able to relock bootloader so it means u have the code for ur device for locking/unlocking, save this code on at least 2 different places (email, google drive, dropbox etc.). Then u can easily unlock ur device again, and install Stock ROM etc.
Click to expand...
Click to collapse
Custom ROMs are the best thing to happen to the Galaxy Win, even if the available choices all have their compromises. But with the M10 lite, I think it's better to stick with stock and mod it. And I'm not exactly a beginner, but rooting the Galaxy Win and modifying it was no hard ordeal. Or the Galaxy Grand for that matter, which I changed its ROM entirely. The Mate 10 lite however, oh dear (wipes sweat).
I've got the system back up and re-fitted it with TWRP and installed Magisk. And yet, when I try backing up the data partition with TWRP, I meet a peculiar error. Excerpt from recovery.log:
Code:
I:addFile '/data/misc/bluedroid' including root: 1
==> set selinux context: u:object_r:bluetooth_data_file:s0
found policy '/data/misc/bluedroid' - '1DK' - '3c2755a577289547'
I:addFile '/data/misc/bluedroid/K+hpne9pCUEHa,R422fJJA' including root: 1
==> set selinux context: u:object_r:bluetooth_data_file:s0
I:Error adding file '/data/misc/bluedroid/K+hpne9pCUEHa,R422fJJA' to '/external_sd/TWRP/BACKUPS/FFY5T18328016218/2019-06-08--20-21-17/data.f2fs.win000'
Error creating backup.
I:ERROR tarList for thread ID 0
Error creating backup.
I:InfoManager saving '/external_sd/TWRP/BACKUPS/FFY5T18328016218/2019-06-08--20-21-17/data.info'
createTarFork() process ended with ERROR: 255
Backup Failed. Cleaning Backup Folder.
I:Copying file /tmp/recovery.log to /external_sd/TWRP/BACKUPS/FFY5T18328016218/2019-06-08--20-21-17/recovery.log
I:Set page: 'action_complete'
I:operation_end - status=1
Searching on the internet, I found the solution was to delete the file that stops the operation from finishing. However, using MiXplorer with full root permissions, I...couldn't find the file...? There's only bt_config.bak, bt_config.conf and macbt. Nothing else. What the heck is up with all that?
I'd appreciate a solution to this.
Tsun_Pooka said:
Custom ROMs are the best thing to happen to the Galaxy Win, even if the available choices all have their compromises. But with the M10 lite, I think it's better to stick with stock and mod it. And I'm not exactly a beginner, but rooting the Galaxy Win and modifying it was no hard ordeal. Or the Galaxy Grand for that matter, which I changed its ROM entirely. The Mate 10 lite however, oh dear (wipes sweat).
I've got the system back up and re-fitted it with TWRP and installed Magisk. And yet, when I try backing up the data partition with TWRP, I meet a peculiar error. Excerpt from recovery.log:
Code:
I:addFile '/data/misc/bluedroid' including root: 1
==> set selinux context: u:object_r:bluetooth_data_file:s0
found policy '/data/misc/bluedroid' - '1DK' - '3c2755a577289547'
I:addFile '/data/misc/bluedroid/K+hpne9pCUEHa,R422fJJA' including root: 1
==> set selinux context: u:object_r:bluetooth_data_file:s0
I:Error adding file '/data/misc/bluedroid/K+hpne9pCUEHa,R422fJJA' to '/external_sd/TWRP/BACKUPS/FFY5T18328016218/2019-06-08--20-21-17/data.f2fs.win000'
Error creating backup.
I:ERROR tarList for thread ID 0
Error creating backup.
I:InfoManager saving '/external_sd/TWRP/BACKUPS/FFY5T18328016218/2019-06-08--20-21-17/data.info'
createTarFork() process ended with ERROR: 255
Backup Failed. Cleaning Backup Folder.
I:Copying file /tmp/recovery.log to /external_sd/TWRP/BACKUPS/FFY5T18328016218/2019-06-08--20-21-17/recovery.log
I:Set page: 'action_complete'
I:operation_end - status=1
Searching on the internet, I found the solution was to delete the file that stops the operation from finishing. However, using MiXplorer with full root permissions, I...couldn't find the file...? There's only bt_config.bak, bt_config.conf and macbt. Nothing else. What the heck is up with all that?
I'd appreciate a solution to this.
Click to expand...
Click to collapse
I am certainly not up to what u r indicating so cant suggest a solution, earlier in my reply, I was only
indicating my experience with custom ROMs. I havent yet come across a single custom ROM for mate 10
lite that has no problems. Earlier Galaxy S4 Mini, there was custom ROM which was awsome, not a single issue
But for mate 10 lite camera problem is most common. Stock camera app often doesnt work or partially
works, restart of the app etc. You can install open camera, but it does not give u best shots, and filters.
Other issues are already discussed in every custom ROM thread, so I had to come back to Stock ROM
with magisk to remove any system apps that I dont need plus other goodies that magisk offers u (modules)
Alright, so I am supposed to install 347, but I uhh...can't, because I don't think TWRP is able to do it. What am I supposed to do in order to carry out the update successfully?
Tsun_Pooka said:
Alright, so I am supposed to install 347, but I uhh...can't, because I don't think TWRP is able to do it. What am I supposed to do in order to carry out the update successfully?
Click to expand...
Click to collapse
Flash the stock erecovery whenever i root my phone i always stick with stock recovery not custom recovery(TWRP)
Theres another method to flash the stock recovery but... This is my method on how to flash stock recovery(erecovery)
PC ONLY!!! and MAKE SURE TO HAVE UNLOCKED BOOTLOADER AND FRP!!!
1.Download MultiTool from https://pro-teammt.ru/en/multi-tool-huawei-honor/
2.Make sure to install Huawei driver from the MultiTool
3.Download This File i provided Here https://mega.nz/#!nZxl2AwZ!6qRIIRbLK4Ub80dPMae4HQQ7e-O49_f2BZ8PhbuZTYM
4.Go to MultiTool and go to recovey Section an select file that you download earlier
5.Make sure to CONNECT USB CABLE TO YOR PC now Reboot your device into Bootloader mode by PRESSING VOLUME DOWN BUTTON and CONNECT THE CABLE TO YOUR PHONE
6.Now on the MultiTool click on Flash Recovery_Ramdisk andlet it flash...,
7.Now You Have The Stock Recovery Installed Now You Can Install Offical Firmware Update On Your Phone
8.All Done
I Hope I Help You
I will follow your guide later today or tomorrow! Thank you for the help!
Tsun_Pooka said:
I will follow your guide later today or tomorrow! Thank you for the help!
Click to expand...
Click to collapse
Np
LoneWolfz said:
Np
Click to expand...
Click to collapse
I just did your instructions today. All was going well up until installation of the new update. The first time, it rebooted when the progress bar was at 6%, then it rebooted again to the recovery, went up to 6% again before showing this screen:
Code:
Software install failed!
Failed to check the update files
Please download the package again
> Reboot system now
So I'm back to square one basically.
Also, I can't install updates to the built-in Huawei apps for some reason, even after flashing the stock recovery. I'm not sure what to do with both issues now...
Tsun_Pooka said:
I just did your instructions today. All was going well up until installation of the new update. The first time, it rebooted when the progress bar was at 6%, then it rebooted again to the recovery, went up to 6% again before showing this screen:
So I'm back to square one basically.
Also, I can't install updates to the built-in Huawei apps for some reason, even after flashing the stock recovery. I'm not sure what to do with both issues now...
Click to expand...
Click to collapse
Try to download the update again
Usually when i tried to install new update(100+Mb) i will ended up what the code said but downloading a Full Update(3.49Gb) Fixed the problem
Just refresh the update in setting and install it
bozka1 said:
Unfortunately, it's impossible...
You can flash Stock ROM for the system from firmwarefinder (fullOTA-MF only!) using HwOTA, HuRupdater, Huawei Multi-tool (RUFI).
If You want to go back to full-stock with locked bootloader (not re-locked) , You have to flash Service ROM from dload (this process will erase all the data from your device!).
Click to expand...
Click to collapse
But can you unlock the bootloader later on with the same code if you wanted or is this it?
Deathecho said:
But can you unlock the bootloader later on with the same code if you wanted or is this it?
Click to expand...
Click to collapse
Yes you can use the same unlock code again.
LoneWolfz said:
Try to download the update again
Usually when i tried to install new update(100+Mb) i will ended up what the code said but downloading a Full Update(3.49Gb) Fixed the problem
Just refresh the update in setting and install it
Click to expand...
Click to collapse
The full update actually installed. Thanks for the tip!
I just still can't update my built-in Huawei apps.
Tsun_Pooka said:
The full update actually installed. Thanks for the tip!
I just still can't update my built-in Huawei apps.
Click to expand...
Click to collapse
Np
Hi!
I had Magisk v23 working fine with Magisk hide but then I upgraded to v24. Magisk app successfully installed and shows Magisk not present. And when I try to DirectInstall Magisk, I get verification failed error. Attached both screenshots.
Now, I have installed and confirm TWRP is working but do not know how to make Magisk working again and it seems it gonna be a wipe. Any help appreciated.
[Discussion] Magisk - The Age of Zygisk.
This is a discussion and help thread for the newer versions of Magisk. The main goal of this thread is to help users migrate to Magisk v24+ SafetyNet Basic integrity Pass CTS profile match Pass Play Protect certification Device is certified...
forum.xda-developers.com
Step by step: Magisk 24.1 is new and as you have seen completely different.
Installation instructions: https://topjohnwu.github.io/Magisk/install.html
Issue is that on my other phone, Sony Xperia XZ Premium G8142, the same in-app upgrade weas successful with out any issues. I lost Magisk Hide but an extension recovered that function. But it all went haywire on this S8
xabu said:
[Discussion] Magisk - The Age of Zygisk.
This is a discussion and help thread for the newer versions of Magisk. The main goal of this thread is to help users migrate to Magisk v24+ SafetyNet Basic integrity Pass CTS profile match Pass Play Protect certification Device is certified...
forum.xda-developers.com
Step by step: Magisk 24.1 is new and as you have seen completely different.
Installation instructions: https://topjohnwu.github.io/Magisk/install.html
Click to expand...
Click to collapse
This guide expects me to know what ROM I have. Thing is, I do not know what my device really is. It's running a ROM that I do not recognize (My post: https://forum.xda-developers.com/t/...l-and-odin-cannot-flash.4372669/post-86069051). I do not have the sources for it so I cannot acquire the required two files. Ramdisk is Yes as per my screenshot but I cannot follow the rest of the guide without the files.
try this
Check hardware and software info Galaxy:
*#12580*369#
Android 9 shows almost certainly a stockrom Pie .
xabu said:
try this
Check hardware and software info Galaxy:
*#12580*369#
Android 9 shows almost certainly a stockrom Pie .
Click to expand...
Click to collapse
I can't seem to get that code run when I dial it. Also, calling doesn't do anything.
Your phone needs twrp and a new good custom ROM ...
HELP! S8 got bricked, can't access recovery mode and OEM is locked
Can I get some help? I bricked my phone because I was trying to install twrp. It flashed but I got an error where it reset my data, after data reset I was stuck at the boot screen with the logo . I've tried steps like flashing stock rom, odin...
forum.xda-developers.com
Here are certainly members of the forum with lots of expertise!
Doomer D. Great said:
I can't seem to get that code run when I dial it. Also, calling doesn't do anything.
Click to expand...
Click to collapse
Maybe only European ?
xabu said:
Your phone needs twrp and a new good custom ROM ...
HELP! S8 got bricked, can't access recovery mode and OEM is locked
Can I get some help? I bricked my phone because I was trying to install twrp. It flashed but I got an error where it reset my data, after data reset I was stuck at the boot screen with the logo . I've tried steps like flashing stock rom, odin...
forum.xda-developers.com
Here are certainly members of the forum with lots of expertise!
Click to expand...
Click to collapse
I just TWRP it. It went smoothly. I love a new ROM but need to know what device is it.
Download mode say it is SM-G950N
Android say it is SM-950FD
Both SIM slots have the same IMEI number. This part is beyond my understanding.
I have Odin and know the basics. Just need to find a ROM I can go for: What official I should flash first and what custom. Any recommendation?
As soon as you make a TWRP total backup, you can see your boot.img and move a copy to your internal sd-card. There it can be picked up by Magisk and patched....Magisk will put it in your download folder on the internal sd-card ...
for the best Rom ask members with your S8 phone. I'am on the S7 Edge.
xabu said:
Maybe only European ?
Click to expand...
Click to collapse
Doomer D. Great said:
I can't seem to get that code run when I dial it. Also, calling doesn't do anything.
Click to expand...
Click to collapse
Just found out:The "famous" secret codes only work on stock based ROMs ¯\_( ͡❛ ͜ʖ ͡❛)_/¯
xabu said:
As soon as you make a TWRP total backup, you can see your boot.img and move a copy to your internal sd-card. There it can be picked up by Magisk and patched....Magisk will put it in your download folder on the internal sd-card ...
for the best Rom ask members with your S8 phone. I'am on the S7 Edge.
Click to expand...
Click to collapse
I have been trying to make the total backup but I do not see any boot.img:
And I do not see the file in the Device/TWRP/Backups:
Again, I must be missing something obvious. And as per the Magisk guide, I need the boot.img
magisk 24 is ****, it's bricking MediaTek powered Samsung phones
Boot.img from TWRP backup
In clockworkmod kernel and recovery are backed up as IMGs. But in TWRP it is boot.emmc.win Anybody know how to convert jt to boot.img? Help will be really appereciated. Sent from my HTC One X using xda app-developers app
forum.xda-developers.com
I must tell you that my custom rom for the s7 gives me the boot.img as the first file as soon as i open the zip.
the boot.img can also be reached by downloading the right stock rom for your phone. In that case it is the best practice to patch the whole
AP file by using Magisk.