Database Users

[SOLVED] Phone gets stuck in bootloop if I try to install Magisk ZIP!

From the forum I followed these step to install magisk:
- Patched my boot.img of my current rom using Magisk Manager and flashed via fastboot
- After rebooting from fastboot it got stuck in recovery so had to wipe all data and it booted finally
- After booting up installed Magisk Manager and both Magisk and Magisk manager shows green tick (installed)
But at this stage, whenever I open Magisk, it shows a recommendation to install a ZIP, if I agree to install it, phone gets stuck in recovery again.
If I choose not to install recommended zip and click Install > Direct Install, phone gets stuck in recovery again anyway
Everytime it gets stuck I have to wipe all data and start all over again. Anyone else facing same issue? Any solution?
Really frustrated right now.
My current rom is : DAVINCIIN INDIAN Global_V11.0.2.0
Used latest magisk manager 7.4.0
I have official recovery, not TWRP.
Afraid that flashing TWRP now will brick it for good.
UPDATE: Got the solution here, thanks @pikchu289 !

Twrp up to now is the best way
But check some stuff first
1.unlock the boot loader
2.chech if the magisk zip/img is corrupted or any file
3.does your os support this magisk version
Any way you can flash twrp because many people had already tried it and tested it from installing zips/ROMs/mods etc.. to backup files/data or even fixing some corrupted files that caused boot loops manually
But there are various things that doesn't work usually such as restoring system partition but never worry about this because if any thing failed just use miflash tool to go back to official/stock rom
Edit : I think something's wrong with your magisk version number

I have no idea which rom youre using or why on earth you didn't install TWRP before messing around with the os but some roms dont work with latest magisk and you have to use a specific older version depends on your rom, and you can't update magisk at any point as long as youre on this version of the rom. Ive always used custom recovery and when facing an issue with magisk you just boot to recovery and flash the 'magisk uninstaller' zip (available on magisk xda page) and reboot and you get system. No need to start from scratch

Solve this solution
Dear stone_henge!
I found a method to solve this solution after a lot of days I tried a lot of times! As follows:
1. I back up my Internal storage to my PC
2. Format Data (In TWRP: Wipe -> Format Data)
3. I reboot back into recovery
4. I connected my device to PC via a cable and copy two files: "Magisk-v20.1.zip" and "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" into Internal storage. Then rename "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" to "Disable_ForceEncrypt.zip"
4. I flash "Magisk-v20.1.zip", then I reboot back into recovery again.
5. I flash "Disable_ForceEncrypt.zip" . Reboot to system and setting my phone like after flash a new room, and then I installed "MagiskManager-v7.4.0.apk"
It's working for me!
You can download "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" here: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389

pikchu289 said:
Dear stone_henge!
I found a method to solve this solution after a lot of days I tried a lot of times! As follows:
1. I back up my Internal storage to my PC
2. Format Data (In TWRP: Wipe -> Format Data)
3. I reboot back into recovery
4. I connected my device to PC via a cable and copy two files: "Magisk-v20.1.zip" and "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" into Internal storage. Then rename "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" to "Disable_ForceEncrypt.zip"
4. I flash "Magisk-v20.1.zip", then I reboot back into recovery again.
5. I flash "Disable_ForceEncrypt.zip" . Reboot to system and setting my phone like after flash a new room, and then I installed "MagiskManager-v7.4.0.apk"
It's working for me!
You can download "Disable_Dm-Verity_ForceEncrypt_10.20.2019.zip" here: https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
Click to expand...
Click to collapse
Finally someone with an answer!
Thanks... Will try and see if it works...
UPDATE: IT WORKED!

Aserar said:
I have no idea which rom youre using
Click to expand...
Click to collapse
Maybe I should've used font size 72 while writing the rom I'm using above.
Aserar said:
why on earth you didn't install TWRP before messing around with the os
Click to expand...
Click to collapse
Yeah some people prefer to have stock recovery and not mess with the phone that much... But while you seem to be an expert on what to do, maybe you could try be helpful a bit and provide with the guide of flashing TWRP on k20? Yeah i can obviously see there are guides already in the forum but I'm curious to know which one you followed.
Aserar said:
some roms dont work with latest magisk and you have to use a specific older version depends on your rom, and you can't update magisk at any point as long as youre on this version of the rom. Ive always used custom recovery and when facing an issue with magisk you just boot to recovery and flash the 'magisk uninstaller' zip (available on magisk xda page) and reboot and you get system. No need to start from scratch
Click to expand...
Click to collapse
None of these lines actually answer my problem or even help in any way. But thanks for enlightening me. -_-

It's true I did miss the part where you mentioned your rom but let's recap..
I did tell you you should install custom recovery.
I did tell you you should probably stick with the magisk version that works and not to update.
I did tell you you don't need to start over every time you get a problem caused by magisk and you can just flash magisk uninstaller and get your system back.
You don't see any of that helpful??? That's fine bc I got news for you.. THIS FORUM IS FREE! Do I have to research your problem for you and give you a step by step guide or else you whine about it?? Plus this is a public forum. People share the knowledge they have with everyone who reads it now and in the future and might get a piece of information out of it.
If you use the time you waste attacking people who used their time to try and help you (instead of saying thanks anyway like the rest of us do) into doing your research (like the rest of us do too) you'll probably be fine.
stone_henge said:
Maybe I should've used font size 72 while writing the rom I'm using above.
Yeah some people prefer to have stock recovery and not mess with the phone that much... But while you seem to be an expert on what to do, maybe you could try be helpful a bit and provide with the guide of flashing TWRP on k20? Yeah i can obviously see there are guides already in the forum but I'm curious to know which one you followed.
None of these lines actually answer my problem or even help in any way. But thanks for enlightening me. -_-
Click to expand...
Click to collapse

Aserar said:
It's true I did miss the part where you mentioned your rom but let's recap..
I did tell you you should install custom recovery.
I did tell you you should probably stick with the magisk version that works and not to update.
I did tell you you don't need to start over every time you get a problem caused by magisk and you can just flash magisk uninstaller and get your system back.
You don't see any of that helpful??? That's fine bc I got news for you.. THIS FORUM IS FREE! Do I have to research your problem for you and give you a step by step guide or else you whine about it?? Plus this is a public forum. People share the knowledge they have with everyone who reads it now and in the future and might get a piece of information out of it.
If you use the time you waste attacking people who used their time to try and help you (instead of saying thanks anyway like the rest of us do) into doing your research (like the rest of us do too) you'll probably be fine.
Click to expand...
Click to collapse
Sorry for being harsh... I understand you actually tried to help. It's actually really frustrating when facing a problem that has no straightforward solution.
Sorry mate.

finally i founded how to fix this issue without formating data of ur device
--just the flash the same the full custom rom or stock rom that u r using currently on . and boom restart. and ur issue fixed

Install a magisk zip without TWRP. TWRP takes too long. Instead use Aodin to flash a rom specific to your device version. Make sure it is not corrupted as well

TWRP, Rooting and Custom Rom HELP SM-T510 Tablet Tab A 10.1

Hey guys, this is my first post. I just bought a Samsung SM-T510 and would like to unlock all the features. I'm currently trying to follow multiple guides on how to do so. To my understanding, my best bet is lineageOs 16. I've been following https://forum.xda-developers.com/gal...-16-0-t3987317 alongside with https://forum.xda-developers.com/gal...howto-t3989361 and I'm pretty confused on the method order i need to follow. What I mean is do I install rom first, TWRP, Magisk etc.?
More guides ive been following:
https://forum.xda-developers.com/gal...-10-1-t3934805
https://forum.xda-developers.com/app...mless-t3473445
https://topjohnwu.github.io/Magisk/i...system-as-root
I see posts saying I need and don't need Multidisabler so I'm confused on what I actually need: https://forum.xda-developers.com/gal...ption-t3963020
Another one: https://forum.xda-developers.com/gal...ption-t3919714
https://forum.xda-developers.com/gal...eries-t3918699
I have so many tabs open currently; I know I'm missing a few important ones.
So given all that info, i think i have all the software to do this between kernels, rom, twrp, odin, magisk, multi disabler? and i think thats all.
My sm-t510 build number is T510XXU2ASK5, looking through the lineage rom guide, I click the link https://samfrew.com/model/SM-T510/ and i see different versions. I'm honestly completely confused about this file and how I'm going to use it. I understand it to be the stock rom? as in factory software? With TWRP too, the numbers don't match my current build number leaving me very confused.
Do I need to downgrade my build number (i don't know if it's even a thing just asking)?
I think i can do everything relatively easy once I have an understanding of what to do first (order of things) and the specific files for the specific steps. When I'm reading these guides, I honestly have no idea which download goes for what. For ex. going back to https://forum.xda-developers.com/gal...-16-0-t3987317 like what do I need to download, the build number listed in notes regarding kernel or go to the download section right below and use that? Or both and if both, how do I use them separately for there a specific purpose? I cannot find anything that makes me feel comfortable rooting/custom rom on my device. Not comfortable in terms of I don't know what I'm doing exactly. I have put days of reading into this and still, I cannot figure out how to do this. I would really appreciate it if someone could help me. This is stressing me out and I would like to get this done before Monday due to me having some serious surgery. The reason being; I won't be as fresh on everything I've read recently.
I'm sorry if this post is choppy and all over the place. I'm just exhausted and clueless at this point. If I left any info out in order for someone to help me please let me know so I can provide it.
EDIT: The TWRP file ends in build number SK1, the file lineage-16.0-20191019-UNOFFICIAL-T510XXU2ASI4.tar.md5 doesn't match the TWRP file as well as my current build number; which ends in SK5. So nothing is matching the 3 last characters in my build number across all guides besides the samfrew link.
Also, I keep seeing i need a .tar TWRP file for recovery (?) but when I unzip both files are .img (named boot/recovery)

You don’t unzip the .tar files. Keep them as is.

secretwolf98 said:
You don’t unzip the .tar files. Keep them as is.
Click to expand...
Click to collapse
I don't get a .tar file until I unzip the folder; I get a filed with .tar.md5

My recommendation would be to first upgrade to T510XXS2ASK1 of the OEM firmware, since that's the latest version for which Samsung has published kernel source. Use the latest release of Odin and install BL, AP and HOME_CSC. After this, unlock the bootloader and prevent VaultKeeper from relocking it by always enabling Debugger Options while connected to the Internet after a factory wipe.
From there, you could just install TWRP, install the latest MultiDisabler, and live with the Samsung firmware. You could even install Magisk to root. However, I prefer a clean Google OS without all the OEM bloatware, so I'd recommend installing the latest Nexus Stock (which includes TWRP and the custom kernel that disables Knox boot security features). Again, use Odin and install it to AP and do a factory wipe in TWRP because file-based encryption is still unsupported on these custom ROMs.
You could install LineageOS instead, but I haven't yet updated that for T510XXS2ASK1. I've just been busy and Andy hasn't been releasing any new LineageOS 16 GSIs. We're also pretty close to releasing a LineageOS 17 build.

fountainb234 said:
I don't get a .tar file until I unzip the folder; I get a filed with .tar.md5
Click to expand...
Click to collapse
Just rename the file cutting off the .md5.

is it possible to downgrade from sk5 to sk1? you cannot upgrade to a later version, and I know downgrading can have reverse effects on the tablet. I have same tablet I would like to know. if I flash sk1 is there a way to fix it if it bricks?
Magendanz said:
My recommendation would be to first upgrade to T510XXS2ASK1 of the OEM firmware, since that's the latest version for which Samsung has published kernel source. Use the latest release of Odin and install BL, AP and HOME_CSC. After this, unlock the bootloader and prevent VaultKeeper from relocking it by always enabling Debugger Options while connected to the Internet after a factory wipe.
From there, you could just install TWRP, install the latest MultiDisabler, and live with the Samsung firmware. You could even install Magisk to root. However, I prefer a clean Google OS without all the OEM bloatware, so I'd recommend installing the latest Nexus Stock (which includes TWRP and the custom kernel that disables Knox boot security features). Again, use Odin and install it to AP and do a factory wipe in TWRP because file-based encryption is still unsupported on these custom ROMs.
You could install LineageOS instead, but I haven't yet updated that for T510XXS2ASK1. I've just been busy and Andy hasn't been releasing any new LineageOS 16 GSIs. We're also pretty close to releasing a LineageOS 17 build.
Click to expand...
Click to collapse

fountainb234 said:
Hey guys, this is my first post. I just bought a Samsung SM-T510 and would like to unlock all the features. I'm currently trying to follow multiple guides on how to do so. To my understanding, my best bet is lineageOs 16. I've been following https://forum.xda-developers.com/gal...-16-0-t3987317 alongside with https://forum.xda-developers.com/gal...howto-t3989361 and I'm pretty confused on the method order i need to follow. What I mean is do I install rom first, TWRP, Magisk etc.?
More guides ive been following:
https://forum.xda-developers.com/gal...-10-1-t3934805
https://forum.xda-developers.com/app...mless-t3473445
https://topjohnwu.github.io/Magisk/i...system-as-root
I see posts saying I need and don't need Multidisabler so I'm confused on what I actually need: https://forum.xda-developers.com/gal...ption-t3963020
Another one: https://forum.xda-developers.com/gal...ption-t3919714
https://forum.xda-developers.com/gal...eries-t3918699
I have so many tabs open currently; I know I'm missing a few important ones.
So given all that info, i think i have all the software to do this between kernels, rom, twrp, odin, magisk, multi disabler? and i think thats all.
My sm-t510 build number is T510XXU2ASK5, looking through the lineage rom guide, I click the link https://samfrew.com/model/SM-T510/ and i see different versions. I'm honestly completely confused about this file and how I'm going to use it. I understand it to be the stock rom? as in factory software? With TWRP too, the numbers don't match my current build number leaving me very confused.
Do I need to downgrade my build number (i don't know if it's even a thing just asking)?
I think i can do everything relatively easy once I have an understanding of what to do first (order of things) and the specific files for the specific steps. When I'm reading these guides, I honestly have no idea which download goes for what. For ex. going back to https://forum.xda-developers.com/gal...-16-0-t3987317 like what do I need to download, the build number listed in notes regarding kernel or go to the download section right below and use that? Or both and if both, how do I use them separately for there a specific purpose? I cannot find anything that makes me feel comfortable rooting/custom rom on my device. Not comfortable in terms of I don't know what I'm doing exactly. I have put days of reading into this and still, I cannot figure out how to do this. I would really appreciate it if someone could help me. This is stressing me out and I would like to get this done before Monday due to me having some serious surgery. The reason being; I won't be as fresh on everything I've read recently.
I'm sorry if this post is choppy and all over the place. I'm just exhausted and clueless at this point. If I left any info out in order for someone to help me please let me know so I can provide it.
EDIT: The TWRP file ends in build number SK1, the file lineage-16.0-20191019-UNOFFICIAL-T510XXU2ASI4.tar.md5 doesn't match the TWRP file as well as my current build number; which ends in SK5. So nothing is matching the 3 last characters in my build number across all guides besides the samfrew link.
Also, I keep seeing i need a .tar TWRP file for recovery (?) but when I unzip both files are .img (named boot/recovery)
Click to expand...
Click to collapse
without reading answers i can say that im with YOU! Im almost 3 days to root my T510! We must RAMDISK YES in Magisk but to do that we need to extract recovery.img (https://www.droidwin.com/install-magisk-in-recovery-root-android/) from stock original ROM T510OXM5CUJ1 and Im stucked at the part NORAMDISK trying to patch recovery.img with Magisk Manager (with recovery mode checked) but i only get the "waiting for device in ADB" and I conect disconect USB C and nothing...Still NO RAMDISK...
I used 3 different ROMS but no lucky and tried with firmware CUJ1 but no lucky again. Without "NORAMDISK: YES" no root...stucked. But i saw a T510 with OrangeFOX!

framC0 said:
without reading answers i can say that im with YOU! Im almost 3 days to root my T510! We must RAMDISK YES in Magisk but to do that we need to extract recovery.img (https://www.droidwin.com/install-magisk-in-recovery-root-android/) from stock original ROM T510OXM5CUJ1 and Im stucked at the part NORAMDISK trying to patch recovery.img with Magisk Manager (with recovery mode checked) but i only get the "waiting for device in ADB" and I conect disconect USB C and nothing...Still NO RAMDISK...
I used 3 different ROMS but no lucky and tried with firmware CUJ1 but no lucky again. Without "NORAMDISK: YES" no root...stucked. But i saw a T510 with OrangeFOX!
Click to expand...
Click to collapse
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.

lewmur said:
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
Click to expand...
Click to collapse
Wow i will try this today and will post feedback. Are you on Android 11? Thank You!
UPDATE: So...flashed with T510XXU5CUL1...
From OEM stock firmware:
Unlock bootloader -> done
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin --> twrp-3.6.0_11-2-T510XXU5CUL1-20220218.tar ---> this put the tablet into emergency mode... had to do again "Hold Vol Up & Vol Down buttons during restart to enter Download mode" and reflash it again. stucked at this point. cant flash TWRP with that! Maybe this TWRP file its for Android 11.2 and im on 11?

framC0 said:
Wow i will try this today and will post feedback. Are you on Android 11? Thank You!
UPDATE: So...flashed with T510XXU5CUL1...
From OEM stock firmware:
Unlock bootloader -> done
Hold Vol Up & Vol Down buttons during restart to enter Download mode
Install TWRP to AP with Odin --> twrp-3.6.0_11-2-T510XXU5CUL1-20220218.tar ---> this put the tablet into emergency mode... had to do again "Hold Vol Up & Vol Down buttons during restart to enter Download mode" and reflash it again. stucked at this point. cant flash TWRP with that! Maybe this TWRP file its for Android 11.2 and im on 11?
Click to expand...
Click to collapse
You don't need to flash TWRP if you flash https://forum.xda-developers.com/t/...k-for-2019-galaxy-tab-a-10-1-sm-t510.4234889/ TWRP is built into this ROM. After installing stock CUL1, did you boot it, connect to wifi, skip the rest of setup and then enable Dev mode before rebooting to download and flashing from Odin?
edit: Don't attempt to download from the regular download link. Use the link under Build archives that says Android File Host and scroll down till you find the CUL1 md5 file.

lewmur said:
You don't need to flash TWRP if you flash https://forum.xda-developers.com/t/...k-for-2019-galaxy-tab-a-10-1-sm-t510.4234889/ TWRP is built into this ROM. After installing stock CUL1, did you boot it, connect to wifi, skip the rest of setup and then enable Dev mode before rebooting to download and flashing from Odin?
edit: Don't attempt to download from the regular download link. Use the link under Build archives that says Android File Host and scroll down till you find the CUL1 md5 file.
Click to expand...
Click to collapse
AH! So donwloaded Nexus_Stock_CR_T510XXU5CUL1-20220219.tar and put into AP in Odin... and FAIL. Error: "Only official released binaries are allowed". Before i flashed with T510XXU5CUL1 didnt conect wifi and enabled usb debug.
EDIT: i dont have OEM unlock option in DEV but its unlocked, i checked when in downloaded mode it says "lock device and..." so its unlocked.

framC0 said:
AH! So donwloaded Nexus_Stock_CR_T510XXU5CUL1-20220219.tar and put into AP in Odin... and FAIL. Error: "Only official released binaries are allowed". Before i flashed with T510XXU5CUL1 didnt conect wifi and enabled usb debug.
Click to expand...
Click to collapse
You must connect wifi and enable Dev mode before flashing. If, after flashing CUL1, you went through the regular setup routine and put in a Google Account, you must also enable OEM in Dev options.

lewmur said:
You must connect wifi and enable Dev mode before flashing. If, after flashing CUL1, you went through the regular setup routine and put in a Google Account, you must also enable OEM in Dev options.
Click to expand...
Click to collapse
YES!!!!!! YOU ARE THE BEST!!!! Done! It booted directly to TWRP!!! THANK YOU!!!! So now will flash Magisk with twrp right? Alawys rooted my devices but this 510 wow...never saw a thing like this
Edit: The fight continues - So i did wipe and format data in TWRP and reboot system and im IN. Installed Magisk 23.0.apk and noticed that im still with "RAMDISK: no"... Searching how to do next to root! Im very near of the goal!!!! Finally! Big thanks to lewmur!

lewmur said:
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file. You can flash the Nexus ROM without first flashing anything else but the latest CUL1 (not CUJ1) stock ROM. Nexus includes both TWRP and gapps. The only time you have to patch things to get Magisk installed is when you are trying to root a stock ROM instead of a custom ROM. Custom ROMs always to the patching for you.
Click to expand...
Click to collapse
I just finished flashing the latest Nexus ROM and rooted it with Magisk merely by flashing the Magisk zip file.
Click to expand...
Click to collapse
Sorry just one more question im very near. I will flash this Magisk (magisk_patched-24300_tkk90.img) in TWRP or Odin? And is this file from https://forum.xda-developers.com/t/...019-galaxy-tab-a-10-1-sm-t510.4234889/page-18 ?
My brain will explode few days in a row to get it rooted
EDIT: Since an older version dont know witch, Magisk Manager and Magisk are joined in apk so i just flashed Magisk 23.0.apk in TWRP...rooted!!! DONE!!!! FINALLY

framC0 said:
Sorry just one more question im very near. I will flash this Magisk (magisk_patched-24300_tkk90.img) in TWRP or Odin? And is this file from https://forum.xda-developers.com/t/...019-galaxy-tab-a-10-1-sm-t510.4234889/page-18 ?
My brain will explode few days in a row to get it rooted
Click to expand...
Click to collapse
Download latest Magisk from https://magiskapp.com/zip/ and flash with TWRP.

lewmur said:
Download latest Magisk from https://magiskapp.com/zip/ and flash with TWRP.
Click to expand...
Click to collapse
Thank you!! Im facing a problem when connect USB to PC...sometime tablet restarts and sometimes dont appear on PC even in device manager. Did you got this also? Not very important because i will access via FTP. Just to learn...thanks!

framC0 said:
Thank you!! Im facing a problem when connect USB to PC...sometime tablet restarts and sometimes dont appear on PC even in device manager. Did you got this also? Not very important because i will access via FTP. Just to learn...thanks!
Click to expand...
Click to collapse
USB cables are notorious for being flaky. Sometimes it helps to just turn the cable over and plug it back in. I always keep several on hand so that if I have connection problems I can try another cable.

Did anybody unlock the bootloader and root the unit?

As topic asked.
It looks like OEM unlock (in developers settings) is hidden on US phone models
The last Samsung I made root was S5e and I am wondering is S6L possible

sadly no
Nope, Samsung hasn't even released the stock firmware yet so any development is currently halted

Can the user unlock the bootloader then?

Haven't tried it, but it should be possible

I don't know about unlocking the bootloader. This page (updated in Apr 2020) showed a way https://www.getdroidtips.com/root-samsung-galaxy-tab-s6-lite/ to root it. I haven't tried it yet. If anybody tries, please leave some comments.
Edit: how to unlock the bootloader https://gearallnews.com/how-to-unlock-bootloader-of-samsung-galaxy-tab-s6-lite-guide-2020-2/

I managed to unlock the bootloader with the tutorial on http://androidbiits.com/root-samsung-galaxy-tab-s6-lite-sm-p610-sm-p610x-easily/, but rooting with the Magisk file failed.
I think i will try it later.
The bootlader is now unlocked, so it gives me a warning on the screen every time i boot the tablet.
I have the P610 version, only WiFi, no LTE

I tried it for the second time and now succeeded.
Installed Titanium Backup and removed some useless system apps.

Iceman66 said:
I tried it for the second time and now succeeded.
Installed Titanium Backup and removed some useless system apps.
Click to expand...
Click to collapse
Has Samsung released the firmware tho? I wanted to root but scared if the process failed I cant flash the old ROM

StuKaGel said:
Has Samsung released the firmware tho? I wanted to root but scared if the process failed I cant flash the old ROM
Click to expand...
Click to collapse
You can find it here: https://samfrew.com/model/SM-P610/ I found the link in the turorial.
Be aware that this is for P610 (only Wifi), but you can find the firmware for the other versions off the S6 Lite as well on this website.

Iceman66 said:
I tried it for the second time and now succeeded.
Installed Titanium Backup and removed some useless system apps.
Click to expand...
Click to collapse
Hi, thank you very much for reporting it. Do you know if Netflix still works after the unlocking and rooting?

dxxvi said:
Hi, thank you very much for reporting it. Do you know if Netflix still works after the unlocking and rooting?
Click to expand...
Click to collapse
Yes, Netflix works after installing Magisk module liboemcrypto disabler :good:

Iceman66 said:
dxxvi said:
Hi, thank you very much for reporting it. Do you know if Netflix still works after the unlocking and rooting?
Click to expand...
Click to collapse
Netflix works after installing Magisk module liboemcrypto disabler :good:
Click to expand...
Click to collapse
I just read about that module. I post the info here for lazy people like me "Please note that a consequence of using this module is that Widevine DRM will fall back to using L3 instead of L1. This means that Netflix will play all content in SD quality, regardless of your subscription type"
https://forum.xda-developers.com/apps/magisk/magisk-liboemcrypto-disabler-drm-t3794393

dxxvi said:
I just read about that module. I post the info here for lazy people like me "Please note that a consequence of using this module is that Widevine DRM will fall back to using L3 instead of L1. This means that Netflix will play all content in SD quality, regardless of your subscription type"
https://forum.xda-developers.com/apps/magisk/magisk-liboemcrypto-disabler-drm-t3794393
Click to expand...
Click to collapse
The strange thing is, that after removing the module and rebooting tablet, Netflix is still working

Iceman66 said:
I managed to unlock the bootloader with the tutorial on http://androidbiits.com/root-samsung-galaxy-tab-s6-lite-sm-p610-sm-p610x-easily/, but rooting with the Magisk file failed.
I think i will try it later.
The bootlader is now unlocked, so it gives me a warning on the screen every time i boot the tablet.
I have the P610 version, only WiFi, no LTE
Click to expand...
Click to collapse
I tried using this guide and am getting a vbmeta signature failure upon flashing with odin. Did you run into any issues like that when you got your device rooted? I'm also using the P610

Same here. Not a noob despite being long time lurker and not posting. I have been rooting devices forever but this one is escaping me.
Using the guide and getting a vbmeta signature failure as well. I tries 3 various firmware versions to Magisk patch the required 4 files, but get the same error every time.
So close yet so far...
Thanks
Eric

Iceman66 said:
The strange thing is, that after removing the module and rebooting tablet, Netflix is still working
Click to expand...
Click to collapse
Yes, it does work but won't go above SD.
I bought the S6 Lite as a replacement for a Tab Pro 10.1 (SM-T520) which was running LOS 14.1. Netflix was working, but looked like crap. Downloading prior to watching improves the quality a bit, but you could see it is SD instead of HD.
I have rooted every Android devices I have had, but this time I do not want to lose the Widevine L1 certification. The SM-T520, which was in 2014 Samsung's high end tablet (>$600), only had one update from 4.4.2 to 4.4.4....rooting was the only way to move up. I hope Samsung will support this device a little better.

b0bness said:
I tried using this guide and am getting a vbmeta signature failure upon flashing with odin. Did you run into any issues like that when you got your device rooted? I'm also using the P610
Click to expand...
Click to collapse
Here is what ik did:
Starting from the step when the firmware is downloaded
Unpack the firmware with Winrar
Select the boot.img l4 file and use 7-Zip to transform it to boot.img
Transfer the boot.img file to tablet and patch the file with Magisk manager
Transfer the patched-boot.img to computer
Rename the file to boot.img
Put tablet in Bootloader-mode
Flash the boot.img with Odin 3.14
The first Block in Odin will turn green if flashing is succesfull
Now start up the tablet
In my case, a got a message that the software is damaged, i choose the option to restore to factor settings
After a few minutes the tablet booted and i installed Root-checker, rooting was succesfull

Iceman66 said:
Here is what ik did:
Starting from the step when the firmware is downloaded
Unpack the firmware with Winrar
Select the boot.img l4 file and use 7-Zip to transform it to boot.img
Transfer the boot.img file to tablet and patch the file with Magisk manager
Transfer the patched-boot.img to computer
Rename the file to boot.img
Put tablet in Bootloader-mode
Flash the boot.img with Odin 3.14
The first Block in Odin will turn green if flashing is succesfull
Now start up the tablet
In my case, a got a message that the software is damaged, i choose the option to restore to factor settings
After a few minutes the tablet booted and i installed Root-checker, rooting was succesfull
Click to expand...
Click to collapse
Thanks for the steps, got it working! To add a note for those reading the above comment. After renaming the file to boot.img, use 7z and 'add to archive' the boot.img to make it a boot.tar for Odin to be able to flash it.
Another thing that might help folks: The boot.img.l4z wasn't working with 7z to decompress the l4z. I installed l4z and moved the boot.img.l4z into the folder with l4z.exe. Then I ran the command 'l4z boot.img.l4z boot.img' in the folder where l4z.exe was located to get the boot.img.

Сan some one to upload a ready-made installation ROM file for direct flashing into Odin please? Cause I can not understand how to transfer and patch all this different parts together. I don't understand which files I need to marry each other
Please help to root with MAgisk tab6 lite (wifi only SM-P610).

Iceman66 said:
Here is what ik did:
Starting from the step when the firmware is downloaded
Unpack the firmware with Winrar
Select the boot.img l4 file and use 7-Zip to transform it to boot.img
Transfer the boot.img file to tablet and patch the file with Magisk manager
Transfer the patched-boot.img to computer
Rename the file to boot.img
Put tablet in Bootloader-mode
Flash the boot.img with Odin 3.14
The first Block in Odin will turn green if flashing is succesfull
Now start up the tablet
In my case, a got a message that the software is damaged, i choose the option to restore to factor settings
After a few minutes the tablet booted and i installed Root-checker, rooting was succesfull
Click to expand...
Click to collapse
[i followed your steps but now i get the [BLOCKED BY OEM LOCK] when using odin to flash boot.
i unlocked bootloader in developer settings. no idea what step i missed.
am using Firmware U1ATF2

[ROOT][TB-X505X] Rooting Lenovo Tab M10 TB-X505X

This guide is now obsolete. Please check my new guide. It has a custom recovery for this device as well as a rooting guide. Refer to this guide only for installing adb and unlocking bootloader.
This rooting guide is for the Lenovo Tab M10 X505X only.
I plan to work on a custom recovery for this tab as well and probably a custom rom in the future.
So please consider donating so that I can keep up the work.
Donations
Google Pay
This will work only on the version "TB-X505X_S001037_200718_ROW". Check it in the Settings > System > About Tablet > Build Number. If it is the newer "X505X_S001038_200819_ROW", do a factory reset and make sure it is the "TB-X505X_S001037_200718_ROW" before proceeding.
Once a custom recovery is made, OTA updates can be applied without losing root. So do not update the tablet until a custom recovery is developed for the device. I plan to develop a custom recovery for it as soon as possible, so please support me.
Anything that goes wrong in this tutorial is not my responsibilty. Proceed at your own risk.
Downloads
patched_boot.img
Step 1. ADB and Fastboot Installation [If adb and fastboot are already installed, skip to Step 2]1. Download the platform tools for your OS from this link.
2. Extract the zip file and place the contents in a folder "platform-tools".
3. To confirm if adb is working, open a command prompt "platform-tools" and run the following command.
Code:
adb version
If it returns the adb version, its done.
Step 2. Unlocking BootloaderWe have to unlock the bootloader inorder to root the device.
Warning: Unlocking bootloader wipes data on the device. It is recommended to backup your data. Proceed at your own risk.
1. Now in the tab, goto Settings > System > About Tablet. Multiple tap the "Build Number" till the developer options are enabled.
2. Goto the developer options and turn on the "OEM unlocking".​3. Power off the device.
4. Turn it on by holding Power Button + Volume Down. Once the screen turns on. leave the power button but continue holding the Volume Down button until the fastboot mode is shown.
5. Now open a command prompt in "platform-tools" and now run the following command:
Code:
fastboot oem unlock-go
Your Bootloader is now succesfully unlocked.​Step 3. RootingNow to root the tab, download the "patched_boot.img" from the top of this post. Copy the file to the "platform-tools" folder.
Make sure the tab is still in the fastboot mode. Otherwise go back into the fastboot mode as instructed before.
Now run the following command:
Code:
fastboot flash boot patched_boot.img
Congratulations, you have rooted your tab.:highfive:
To complete the process, run the following command.
Code:
fastboot reboot
Once the tab turns on, goto this link and download the latest version of Magisk apk and install it. It is required to control the root privileges for other apps.​That's all. You now have a rooted tab.:victory:
If this helped you, hit the thanks button.
And keep tuned for new stuff that are to come for this device.

Thanks for this thread for the TB-X505X.
Shamil Niyas said:
I plan to work on a custom recovery for this tab as well...
I plan to develop a custom recovery for it as soon as possible...
Click to expand...
Click to collapse
Have a look at this post for a TWRP that works with the TB-X505F. It might work for the TB-X505X, provided the X505X uses the SDA429 soc. That version of TWRP is unofficial and does not decrypt the data partition.
If the X505F version of TWRP works for you, then you won't need to patch the boot image - you can just install the Magisk update.zip in TWRP. This saves you from having to release a new patched boot image every time there's an OTA.
Shamil Niyas said:
Once a custom recovery is made, OTA updates can be applied without losing root.
Click to expand...
Click to collapse
With the TB-X505F/L, TB-X605F/L and TB-X705F/L we've found that you need to uninstall Magisk to apply OTAs. This is because Lenovo's OTA updater scripts verify you have unmodified boot, system, vendor and firmware partitions. So make sure you backup these partitions as stock.

Yahoo Mike said:
Thanks for this thread for the TB-X505X.
Have a look at this post for a TWRP that works with the TB-X505F. It might work for the TB-X505X, provided the X505X uses the SDA429 soc. That version of TWRP is unofficial and does not decrypt the data partition.
If the X505F version of TWRP works for you, then you won't need to patch the boot image - you can just install the Magisk update.zip in TWRP. This saves you from having to release a new patched boot image every time there's an OTA.
With the TB-X505F/L, TB-X605F/L and TB-X705F/L we've found that you need to uninstall Magisk to apply OTAs. This is because Lenovo's OTA updater scripts verify you have unmodified boot, system, vendor and firmware partitions. So make sure you backup these partitions as stock.
Click to expand...
Click to collapse
I gave a look at the TWRP image. Unfortunately, X505X does not boot into the recovery image. It would have been great if it worked. I guess it is because of the different processor, as you mentioned.
It is the same for X505X as well. OTA cannot be applied without uninstalling Magisk. So I guess OTAs are a no-go until a custom recovery is developed. The latest update is also just a boot image patch. So there is no way to use magisk on that.
Thanks for the advice.

But i updated to android 10 S001122_200915
Sir, thanks for the thread.,
But unfortunately my version is S001122_200915 and u had posted patched boot_img for S001037 version. I dont want to downgrade. Please make a patched boot_img for this version.

Excuse me if this was asked before. Is there a rooting method for TB-X505F? It's the model that is sold in Europe. I'm thinking of buying this.

ShAd0W_z0nE said:
Excuse me if this was asked before. Is there a rooting method for TB-X505F? It's the model that is sold in Europe. I'm thinking of buying this.
Click to expand...
Click to collapse
This post has instructions for the X505F, under "How do I root my device?".

cYBER~VeTeRaN said:
Sir, thanks for the thread.,
But unfortunately my version is S001122_200915 and u had posted patched boot_img for S001037 version. I dont want to downgrade. Please make a patched boot_img for this version.
Click to expand...
Click to collapse
I'm currently working on the twrp for this device. Once it is finished it should be able to root without downgrading.

cYBER~VeTeRaN said:
Sir, thanks for the thread.,
But unfortunately my version is S001122_200915 and u had posted patched boot_img for S001037 version. I dont want to downgrade. Please make a patched boot_img for this version.
Click to expand...
Click to collapse
Hello cYBER-VeTeRaN,
I have compiled a TWRP for X505X. You can find it here. Install the magisk zip from TWRP and you should be able to root your tablet regardless of the verison.:victory:
Hit the thanks button.

Shamil Niyas said:
Hello cYBER-VeTeRaN,
I have compiled a TWRP for X505X. You can find it here. Install the magisk zip from TWRP and you should be able to root your tablet regardless of the verison.:victory:
Hit the thanks button.
Click to expand...
Click to collapse
Thanks sir. Great job and I'm also from kerala, nice to meet you

Good afternoon.
I have this version ( Build number TB-X505F_S001142_210804 ROW ) of Android on my Lenovo TB X505F.
Can you tell me if this method works with this version of Android?

jsvenancio said:
Good afternoon.
I have this version ( Build number TB-X505F_S001142_210804 ROW ) of Android on my Lenovo TB X505F.
Can you tell me if this method works with this version of Android?
Click to expand...
Click to collapse
[RECOVERY][TB-X505F][UNOFFICIAL] TWRP 3.6.x for Lenovo Tab M10 HD
This version of TWRP works on the Lenovo TB-X505F (wifi). For the TB-X505X, see this thread. For the TB-X605F/L, see this thread. For the TB-X606F/L, see this thread. The X606F/L is the second gen M10 and it uses a Mediatek SOC. #include...
forum.xda-developers.com
Twrp for x505f

Umm where it says to download my os there is no link provided. Same goes for fastbook it takes me tomyour old guide and then there is no link where a person would think they would find it. Am I stupid and missing something or all the links broke/missing ?
I'd prefer to be stupid.... Just saying..

tombaldwin6 said:
Umm where it says to download my os there is no link provided. Same goes for fastbook it takes me tomyour old guide and then there is no link where a person would think they would find it. Am I stupid and missing something or all the links broke/missing ?
I'd prefer to be stupid.... Just saying..
Click to expand...
Click to collapse
Check his new guide, just flash twrp and flash magisk from there

Guys, I am stuck in a Bootloop after i tried that with the patched boot img. Can someone help?

Tamiiiiiii812 said:
Guys, I am stuck in a Bootloop after i tried that with the patched boot img. Can someone help?
Click to expand...
Click to collapse
Download rom, extract boot.img from it and flash it. Makw sure you download the right version.
You can find the rom here:- https://mirrors.lolinet.com/firmware/lenovo/Tab_M10_HD/TB-X505X/

cYBER~VeTeRaN said:
Download rom, extract boot.img from it and flash it. Makw sure you download the right version.
You can find the rom here:- https://mirrors.lolinet.com/firmware/lenovo/Tab_M10_HD/TB-X505X/
Click to expand...
Click to collapse
OMG IT WORKED. Thank you.

Thanks bro. I found what I needed..

Shamil Niyas said:
1. Download the platform tools for your OS from this link.
Click to expand...
Click to collapse
yeah, where is the link?

Booe said:
yeah, where is the link?
Click to expand...
Click to collapse
Just search for platform tools and download it.

Guys, i tried the above mentioned method but my device is showing (can,t load android system. your data my be corrupt. if you continue to get this message, you may need to perform a factory data reset and erase all user data stored on this device) after performing a factory data reset the device reboots and the welcome menu shows up after 15-30 seconds the device automatically shut down and again shows the same message (can,t load android system. your data my be corrupt. if you continue to get this message, you may need to perform a factory data reset and erase all user data stored onnn this device). this goes again and again......

Failed to root my Samsung Galaxy S10+. G975F/DS. Boot-loop after root.

Hello all !
I followed this tutorial on how to root my Galaxy S10+ : https://www.thecustomdroid.com/samsung-galaxy-s10-root-guide/ but there are 2 problem:
1st: At the Step6, the file name isn't exactly magisk_patched.tar but magisk_patched-25200_xLm0q.tar. Is this a problem ?
2nd: at Step 10, when I want to exit the Download Mode (Volume Down and Power button for over 7s), the phone get in a boot-loop (which I found online that it means the phone can't find a proper OS to boot on)
How can I know what I'm doing wrong ? I have a doubt on the stock firmware I found on Frija:
my phone is a G975F-DS and there is no "G975F-DS" but only "G975F"
I can't use Phone Info Sam because the link is broken/the app doesn't exist anymore ? When I type *#1234# the CSC code is G975FOXMGHWA3. I searched OXM but couldn't find anything on Frija so I search and I've read that OXM is not the correct CSC Code so I went to Software INFO and in the Service provider software version it's written ...SM-G975F_OXM_XSP... so I chose the XSP firmware and did the root with it until the phone boot-looped.
My service provider now in KT in Korea, does it make a difference ?
Thank you for reading me
Edit: I found Phone INFO ★SAM★ 3.8.5 By vndnguyen on APK Mirror and it says " Firmare's CSC Code: XEF" and "Active CSC Codes: XSP". Which one is correct ?

Reflash the stock firmware, then flash TWRP and flash Magisk in TWRP.

First Flash Offical firmware (BL,AP,CP,CSC)
Then Patch AP file by magisk

windows4droid said:
First Flash Offical firmware (BL,AP,CP,CSC)
Then Patch AP file by magisk
Click to expand...
Click to collapse
Isn't it the same as Step 6 from the tutorial ?
V0latyle said:
Reflash the stock firmware, then flash TWRP and flash Magisk in TWRP.
Click to expand...
Click to collapse
May I ask a trustful tutorial on how to do it please ?

Constantine1711 said:
Isn't it the same as Step 6 from the tutorial ?
May I ask a trustful tutorial on how to do it please ?
Click to expand...
Click to collapse
The firmware must be flashed first
Then you make a patch from the AP file
The baseband of the device must be identical to the firmware from which the root file is made

windows4droid said:
The firmware must be flashed first
Then you make a patch from the AP file
The baseband of the device must be identical to the firmware from which the root file is made
Click to expand...
Click to collapse
Patching the AP.tar doesn't always work.
@Constantine1711 just flash the original firmware in Odin, then follow the guide in the TWRP thread for this device to install TWRP. Once you have TWRP installed, flash Magisk in TWRP. No need to rename it to .zip, just install it like you would any other zip

V0latyle said:
Patching the AP.tar doesn't always work.
@Constantine1711 just flash the original firmware in Odin, then follow the guide in the TWRP thread for this device to install TWRP. Once you have TWRP installed, flash Magisk in TWRP. No need to rename it to .zip, just install it like you would any other zip
Click to expand...
Click to collapse
Yes, you can try twrp
[RECOVERY][OFFICIAL][3.6.1-x] TWRP for Galaxy S10/e/+/5G Exynos
Official TWRP 3.6.1-* For Galaxy S10/e/+/5G Only for exynos variants - G970F / G973F / G975F / G977B (Europe - Global, Single/Dual-SIM), G970N / G973N / G975N / G977N (South Korea) Disclaimer I am not responsible for bricked devices, dead SD...
forum.xda-developers.com

Edit: see below

V0latyle said:
Patching the AP.tar doesn't always work.
@Constantine1711 just flash the original firmware in Odin, then follow the guide in the TWRP thread for this device to install TWRP. Once you have TWRP installed, flash Magisk in TWRP. No need to rename it to .zip, just install it like you would any other zip
Click to expand...
Click to collapse
I did that and now my Phone Status is Custom but Root Checker says Root access is not properly installed.

Constantine1711 said:
I did that and now my Phone Status is Custom but Root Checker says Root access is not properly installed.
Click to expand...
Click to collapse
What version of Magisk are you using and where did you download it from?

V0latyle said:
What version of Magisk are you using and where did you download it from?
Click to expand...
Click to collapse
I got the v25.2 from magiskmanager.com/

Constantine1711 said:
I got the v25.2 from magiskmanager.com/
Click to expand...
Click to collapse
NEVER download Magisk from anywhere but the official Magisk repo. That is the ONLY trustworthy source; any other source is not affiliated with the project and may be malware.

V0latyle said:
NEVER download Magisk from anywhere but the official Magisk repo. That is the ONLY trustworthy source; any other source is not affiliated with the project and may be malware.
Click to expand...
Click to collapse
Oops ... what's the risk ? Should I reset my phone again ?

Constantine1711 said:
Oops ... what's the risk ? Should I reset my phone again ?
Click to expand...
Click to collapse
The risk is malware, like a virus. If you've had questionable apps with root access, I would absolutely recommend you perform a clean factory flash.

V0latyle said:
The risk is malware, like a virus. If you've had questionable apps with root access, I would absolutely recommend you perform a clean factory flash.
Click to expand...
Click to collapse
Is it possible to check if an apk is different from the github one ? Like a code checker or something. I'm so tired of reseting my phone it's been a week I try to root it ...
Otherwise, maybe I'll try with an other tutorial.
The Proper Way to root your S10 (10+,10e) Device and get it Right! Tipps & Tricks
Hi Guys :cowboy: Today I want to bring some simple and effektive Insights on proper Device & Software Management and also about Mistakes on the Way and Solutions! :good: ;) So make yourself comfortable and check this out! It will really help...
forum.xda-developers.com
Is this one a good one ?
Is it just me getting older or rooting a device got much more complicated than before ? (I use to root PSP/playstation2 and 3 in the past)
I missed having full control of my device so I thought to root my phone but it's seems so complicated for so little reward
Edit: I tried to follow the official Magisk tutorial but I failed so I'm just gonna stop trying here. Sorry for wasting your time guys !