Hi,i really need help. My phone was working fine a few days back when i entered the recovery mode in f320L and deleted the system files. After that i saw the flash method and accidentally installed d802 firmware in my lg,not properly though,when the flashing was done on my phone,on my laptop it said "upgrade failed" while my phone was flashed. And now its touch is all messed up and restarts after every 5 seconds. It goes into download mode but not in recovery mode. I tried flashing the proper f320L files but its not working,it says "phone disconnected from PC" at 2%. My phone has been idle and useless for days. I would really appreciate some help. And since I'm from Pakistan i tried paying some geeks to fix it but they couldnt either.
mustfafafakhar said:
Hi,i really need help. My phone was working fine a few days back when i entered the recovery mode in f320L and deleted the system files. After that i saw the flash method and accidentally installed d802 firmware in my lg,not properly though,when the flashing was done on my phone,on my laptop it said "upgrade failed" while my phone was flashed. And now its touch is all messed up and restarts after every 5 seconds. It goes into download mode but not in recovery mode. I tried flashing the proper f320L files but its not working,it says "phone disconnected from PC" at 2%. My phone has been idle and useless for days. I would really appreciate some help. And since I'm from Pakistan i tried paying some geeks to fix it but they couldnt either.
Click to expand...
Click to collapse
Read this topic http://forum.xda-developers.com/lg-g2/development-d802/fix-lg-flash-tool-stuck-2-t3031112
P.p This si only D802. Sorry.
Related
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
It's bootloop. When I had L5 I had the same problem after flashing bricked phone via KDZ.
Do hard reset with key combination. It worked for me. Phone will boot up few minutes.
LeoFalto said:
Hello, I ran into a problematic brick on my L5...nothing seems to work to unbrick it.
I followed the guides step by step using the KDZ updater and the appropriate firmware for my country, but it doesn't work.
How I bricked it:
I had CM10 installed and perfectly running for a month, so today I decided to attempt an overclock to speed the device up a bit.
So, I downloaded and installed the modded kernel, flashed it using CWM and rebooted the device. After that, the device just keep booting up, showing the LG logo and then a black screen.
Now, after trying to flash the old firmware after going into download mode it just stops on the LG logo with the flare (sun ray effect) spinning around the logo all the time...It's been like that for almost 30 minutes now. I attempted re-flashing it 3 times but nothing seems to work.
What do I do?
Thank you in advance.
Click to expand...
Click to collapse
I was forced to do a hard reset...that sucks but it had to be done.
Thank you.
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
aeoros said:
I have a worst brick, I was rebooting when my phone frozen at the shuting down page, so I took out the batterie, then when I tried to turn on .... nothing, not even lg logo, nor buttons lights, ... nothing, I can't even activate download mode to reflash it!!! what can I do???, does anyone had same problem before
please help me I'm really starting to freack
Click to expand...
Click to collapse
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
nastase.alex said:
i had the same problem with my l7 ... problem was solved in an authorized gsm service with jtag method...
but i will try to help u with this... Your phone is seen in device manager as unknown or lge android platform or adb ... ? if so, try with adb sdk tools...
Click to expand...
Click to collapse
nop, it's like the device is dead,
Have you tried it:
Hold together volumn (-) + home button, then turn the power on
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
so there is no solution to this brick???
aeoros said:
sorry for the delay, The phone was dead so I send it to the warranty and they send it to LG and then returned working so I just had to reroot it and update it again
Click to expand...
Click to collapse
Quote:
Originally Posted by breakercris
I've tried everything.
The phone simply doesn't connect.
USB\VID_05C6&PID_9008&REV_0000
This is what I get when I connect the phone by USB.
I just cant get into emergency, DIAG or emergency CS
KDZ the phone connects and then I get a message afterwards PHONE NOT FOUND.
everytime I install the drivers by LG support tool, it keeps giving me the option to install the driver, like I havent done it a hundred times over.
I think there should be a driver somewhere that can be installed but the only people that have this driver are LG tech's. So they can bill you after
send the phone in cause you rooted it. So the one billion dollar question is witch hero will find a way to unbrick this device. We only need a way
to get a driver to install and we are home free. Or maybe the only other option is throwing the phone for sale on internet for spare parts
HELP PLEASE HELP find a way to unbrick this phone. Believe me I flashed and bricked alot of different phones and there was a way out but in
with this phone it seems impossible!!
And there is no mode to put it in in because te volume buttons don't do crap, the home button also, the only time that the phone does show up is when windows tells me it has an unknown device that I for the love of god can't find a driver for. I tried SDK, the LG drivers, but no dice
Did you try emergency mode? (volume up + volume down + power button)
If not, see if you can enter it and then flashing your stock firmware with Software update [KDZ] 1.0.4.4 (KDZ-Flasher).
I have a big issue here with my LG G2 Original carrier is T-Mobile but the phone is unlocked, it's rooted , I restored LG stock from back up using recovery and flashed d802 instead of d801 hit system reboot and was greeted with a black screen fastboot udc and udc start , I've done some searching on this forum found this http://forum.xda-developers.com/showthread.php?t=2432476&page=1, followed all of the steps but for some reason I get to as far as choosing the country and language upgrades starts and stops at 2% due to an unkown error , I've unistalled and reinstalled LG Mobile drivers still same error message, I put the phone into download mode but it device does not pop up on my computer is this phone done for or is it fixable I have no idea what else to try
all the help that you guys can give is appreciated
Izz14 said:
I have a big issue here with my LG G2 Original carrier is T-Mobile but the phone is unlocked, it's rooted , I restored LG stock from back up using recovery and flashed d802 instead of d801 hit system reboot and was greeted with a black screen fastboot udc and udc start , I've done some searching on this forum found this http://forum.xda-developers.com/showthread.php?t=2432476&page=1, followed all of the steps but for some reason I get to as far as choosing the country and language upgrades starts and stops at 2% due to an unkown error , I've unistalled and reinstalled LG Mobile drivers still same error message, I put the phone into download mode but it device does not pop up on my computer is this phone done for or is it fixable I have no idea what else to try
all the help that you guys can give is appreciated
Click to expand...
Click to collapse
I have the same problem, could you find a solution?
Please help
You need to flash your phone's original Jellybean (4.2) firmware, it is the only way that worked for me.
Hi everyone
please accept for my poor English straight away and that i am noob
i bought LG p700 from the ebay saying that it is stuck in a boot loop mode so i thought it will be an easy fix which is not at all,
what i found out that it has a clockwordMod Recovery v6.0.3.2 i am not really sure if it helps or not ,
i red i couple topic's how to go back to the stock Rom but it doesn't work for me the the KDZ doesn't found the phone, even thought when i connect it to the computer the windows 7 automatically installed the drivers of the phone,
also i tried to install from my sdcard cm-10-20131006-NIGHTLY-p700 but it didnt work , everything goes fine but in the end it steal stucks in the boot loop,
so is there anyone could help me with is phone i will appreciate it a lot , also i prepared to install a stock Rom because i am a bit an old fashion i got
KDZ_FW_UPD_EN and V20D_00.kdz but as i said when i tried to install it, it didn't go true because i got a message where it says that the phone was not found
many thanks
gugutm
gugutm1 said:
Hi everyone
please accept for my poor English straight away and that i am noob
i bought LG p700 from the ebay saying that it is stuck in a boot loop mode so i thought it will be an easy fix which is not at all,
what i found out that it has a clockwordMod Recovery v6.0.3.2 i am not really sure if it helps or not ,
i red i couple topic's how to go back to the stock Rom but it doesn't work for me the the KDZ doesn't found the phone, even thought when i connect it to the computer the windows 7 automatically installed the drivers of the phone,
also i tried to install from my sdcard cm-10-20131006-NIGHTLY-p700 but it didnt work , everything goes fine but in the end it steal stucks in the boot loop,
so is there anyone could help me with is phone i will appreciate it a lot , also i prepared to install a stock Rom because i am a bit an old fashion i got
KDZ_FW_UPD_EN and V20D_00.kdz but as i said when i tried to install it, it didn't go true because i got a message where it says that the phone was not found
many thanks
gugutm
Click to expand...
Click to collapse
Install LG PC Suite, the LG Mobile Support Tool and the LG L7 USB driver. Then try again. Make sure your phone is set on 3GQCT and EMERGENCY on KDZ.
Before you install a ROM, you're recommended to wipe data.
Bootloops can occurs in many ways, if you can logcat your problem, maybe we can help you.
F4uzan said:
Before you install a ROM, you're recommended to wipe data.
Bootloops can occurs in many ways, if you can logcat your problem, maybe we can help you.
Click to expand...
Click to collapse
hi there im stuck in lg logo i had 4.4.2 but i had some problems with my gps so i decided to go back on v20d i used kdz emergency 3gqct battery out phone in emergency mode and im stuck in lg logo please can someone help me and sorry if my english is bad im from croatia.
Hi there,
I installed the LG software update app, and when I plugged in my phone it did some checking and said that there was an update available.
So I clicked OK, waited for ages for the kdz package to download, and then it started the update.
Problem is, it gets to 14% on the phone screen (20% on my computer) and then it hangs for a while. Eventually the PC app says "upgrade stopped due to an error". Now my phone is constantly stuck on the Firmware Upgrade screen, even when I restart it, and I can't even ADB onto it, or use Linux to view it (as mentioned in a different post).
I can't get into download mode or recovery mode... just this Firmware Upgrade screen.
Any ideas what I can do? I stupidly thought that - as it was an official upgrade - it wouldn't screw up my phone... how stupid do I feel ???
Anything I can try? My phone is an LG G2 International (D802) version.
Thanks a lot,
JM
@MOD, sorry - I realised my OP was in the wrong place, so moved it here
jasonnm said:
Hi there,
I installed the LG software update app, and when I plugged in my phone it did some checking and said that there was an update available.
So I clicked OK, waited for ages for the kdz package to download, and then it started the update.
Problem is, it gets to 14% on the phone screen (20% on my computer) and then it hangs for a while. Eventually the PC app says "upgrade stopped due to an error". Now my phone is constantly stuck on the Firmware Upgrade screen, even when I restart it, and I can't even ADB onto it, or use Linux to view it (as mentioned in a different post).
I can't get into download mode or recovery mode... just this Firmware Upgrade screen.
Any ideas what I can do? I stupidly thought that - as it was an official upgrade - it wouldn't screw up my phone... how stupid do I feel ???
Anything I can try? My phone is an LG G2 International (D802) version.
Thanks a lot,
JM
@MOD, sorry - I realised my OP was in the wrong place, so moved it here
Click to expand...
Click to collapse
What about fastboot did u tried it ?
azher98 said:
What about fastboot did u tried it ?
Click to expand...
Click to collapse
Hi there,
Nope - can't get into any other mode than this "Update" mode... gonna try a few tools. Was trying to salvage my stuff, but it's not the end of the world to wipe it.
Thanks,
J
[RESOLVED]
Problem solved! Try the .TOT method shown here:
http://forum.xda-developers.com/showthread.php?t=2432476
The .KDZ method didn't work for me, from this post or any other. The .TOT method worked first time!
Hello XDA-Community
Today i accidently briked my G2 (D802 KitKat 4.4.2). I was flashing it because i wanted to unroot it but during the process an error showed up and my phone was dead.
So i tried to fix it with this method http://forum.xda-developers.com/showthread.php?p=48765620#post48765620 but it didn't worked as planned.
Now i have an G2 which is stuck in a bootloop and i can't even reach the recovery or the download mode and i don't have any custom recovery installed.
Anyone who can help me with this get's an 10€/$ PSC. I can't give more because i dont have any money left (16 years old).
Big thanks to everyone who can help me with this
PS: Sorry for my bad english i'm not a native speaker
While you wait for an answer make sure your phone is kept charged.
Have you tried LG flashtool and your stock ROM?
make sure it's off, hold the VOLUME UP button while plugging it into your computer, and that should get it into download mode.
Next try using the TOT method (google it) and voila!
Yeah the problem is that i can't even reach the download mode and my computer doesn't recognize my phone it's just an qshub device. ;(
I had the same issue bricking my lg g2 and i was stuck with the logo and nothing more not even download mode,recovery etc...
The way i got it to stock was i installed the lg g2 drivers and from there on just flashed it with flashtools kdz and got it workking again i think this shoould help you out just plug your phone and install the drivers and use flashtools
Install this driver then report me back or cap screen device manager to me.I will help you for fee.
https://www.dropbox.com/s/a69s06mkpzao01m/qhsusb_bulk_DRIVER_G2.zip?dl=0