HI,
I'm new here
(sorry if i break some rule's)
so.... i want to root my s6 edge + , i try evrithing
first i tried odin i download some firmeware from sammobile (not 100% sure if it was correct firmware)becaus i bricked my phone,
so after 3 days i was able to fix the phone , with smart switch
so now i tryed some one click root apps king root say ' root strategy not avalble' and kingoroot pc ' ROOT FAIL
so pleas help me
6.0.1
baseband: G9288FXXU2BPB6
kernel: 3.10.61-7080791
[email protected]#1
buildnr: MMB29K.G928FXXS2BPE2
Note: i am not responsible for any damage taken using this method just follow the instruction properly and you will not have any problems
Your phones version should be marshmallow 6.0.1 dont use this if your version is lollipop
Prerequisites:
Odin,Twrp,samsung usb drivers,supersu beta by chainfire,a computer and usb cable
Links for download is below
Procedures:
1.install samsung usb drivers to your computer
2.copy twrp file to your computer in desktop(if its extension is .zip then extract it, then if its .img then leave it)
3.copy odin file to your pc in desktop and extract it
4.copy supersu file to your internal memory, be sure to memorize where you put the file
5.open odin.exe file in desktop, go to option, untick auto reboot,and leave everything else.
6.from your phone go to developer options, (to go there click build number many times) now find oem unlocking and enable it .. (Just to be sure remove google account and screen lock to avoid frp lock)
7.power off your phone and go to download mode(to go there,hold power button,volume down button,and home button simultaneously, and press volume up to enter dl mode)
8.plug your phone to pc (be sure you followed step 4 or else you may get dm verification) just follow everything else correctly and your good to go
9.now go to odin and click AP button,a file explorer will appear and find the twrp file and select it and then click start
10.you will see the message in odin PASS
11.this is important step.... Now click all the button of your phone, as soon as it gets out to download mode quickly unpress volume down leaving only power,home,volume up button
12 keep pressing those 3 buttons until you will see red message in upper left but just ignore it and keep pressing the button
13 and now twrp will be open and it will say allow modification? Be sure supersu file is already stored in your phone storage to apply patch
Now swipe right to allow
14. Now go to the box saying install and find your supersu file and select and install it(swipe right to install)
15.Super su file will be installed and patch will be applied and after it is done, click reboot system..
Now your phone will reboot and wait
You now have root access and custom recovery installed , to check root, download supersu in play store and root checker,
Download link:
ODIN link: http://uploaded.net/file/6xtojk1o
TWRP link: https://dl.twrp.me/noblelte/twrp-3.0.0-0-nobleltezt-nobleltezt.img.tar
supersu: https://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
USB drivers link: http://developer.samsung.com/technical-doc/view.do?v=T000000117
REFERENCE: http://www.androidsis.com/recovery-root-samsung-galaxy-s6-edge-plus/
---------- Post added at 06:58 AM ---------- Previous post was at 06:48 AM ----------
Look son we have the same phone, g928f
And build number mmb29k.g928fxxs2bpe2 and baseband version ... if you follow the instruction properly then you will have root access
I give it a try cane u support maybe chat or skype pr somthing ?
Verstuurd van mijn SM-G928F met xda-developers.com, mogelijk gemaakt door appyet.com
cane u support on chat or skype ? same baseband u from nl or be?
i fot first prob xD twrp file is .img.tar so don't extract?
u ar the best !!!!!
agantal864 said:
Note: i am not responsible for any damage taken using this method just follow the instruction properly and you will not have any problems
Your phones version should be marshmallow 6.0.1 dont use this if your version is lollipop
Prerequisites:
Odin,Twrp,samsung usb drivers,supersu beta by chainfire,a computer and usb cable
Links for download is below
Procedures:
1.install samsung usb drivers to your computer
2.copy twrp file to your computer in desktop(if its extension is .zip then extract it, then if its .img then leave it)
3.copy odin file to your pc in desktop and extract it
4.copy supersu file to your internal memory, be sure to memorize where you put the file
5.open odin.exe file in desktop, go to option, untick auto reboot,and leave everything else.
6.from your phone go to developer options, (to go there click build number many times) now find oem unlocking and enable it .. (Just to be sure remove google account and screen lock to avoid frp lock)
7.power off your phone and go to download mode(to go there,hold power button,volume down button,and home button simultaneously, and press volume up to enter dl mode)
8.plug your phone to pc (be sure you followed step 4 or else you may get dm verification) just follow everything else correctly and your good to go
9.now go to odin and click AP button,a file explorer will appear and find the twrp file and select it and then click start
10.you will see the message in odin PASS
11.this is important step.... Now click all the button of your phone, as soon as it gets out to download mode quickly unpress volume down leaving only power,home,volume up button
12 keep pressing those 3 buttons until you will see red message in upper left but just ignore it and keep pressing the button
13 and now twrp will be open and it will say allow modification? Be sure supersu file is already stored in your phone storage to apply patch
Now swipe right to allow
14. Now go to the box saying install and find your supersu file and select and install it(swipe right to install)
15.Super su file will be installed and patch will be applied and after it is done, click reboot system..
Now your phone will reboot and wait
You now have root access and custom recovery installed , to check root, download supersu in play store and root checker,
Download link:
ODIN link: http://uploaded.net/file/6xtojk1o
TWRP link: https://dl.twrp.me/noblelte/twrp-3.0.0-0-nobleltezt-nobleltezt.img.tar
supersu: https://download.chainfire.eu/924/SuperSU/BETA-SuperSU-v2.68-20160228150503.zip
USB drivers link: http://developer.samsung.com/technical-doc/view.do?v=T000000117
REFERENCE: http://www.androidsis.com/recovery-root-samsung-galaxy-s6-edge-plus/
---------- Post added at 06:58 AM ---------- Previous post was at 06:48 AM ----------
Look son we have the same phone, g928f
And build number mmb29k.g928fxxs2bpe2 and baseband version ... if you follow the instruction properly then you will have root access
Click to expand...
Click to collapse
Did you tried it already? How may i support you?
---------- Post added at 11:51 AM ---------- Previous post was at 11:37 AM ----------
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
See? Your phone is the same as mine so that can be rooted .. dont mind the dark background, i changed my theme
Sent from my SM-G928F using XDA-Developers mobile app
---------- Post added at 11:52 AM ---------- Previous post was at 11:51 AM ----------
If twrp is .img no need to extract just leave it
Sent from my SM-G928F using XDA-Developers mobile app
Thx
It works thx
agantal864 said:
Did you tried it already? How may i support you?
---------- Post added at 11:51 AM ---------- Previous post was at 11:37 AM ----------
See? Your phone is the same as mine so that can be rooted .. dont mind the dark background, i changed my theme
Sent from my SM-G928F using XDA-Developers mobile app
---------- Post added at 11:52 AM ---------- Previous post was at 11:51 AM ----------
If twrp is .img no need to extract just leave it
Sent from my SM-G928F using XDA-Developers mobile app
Click to expand...
Click to collapse
Your welcome
Can anybody help me I tried Al possible means to root me but keep getting ramdisk decompressing failed... I have successfully installed twrp and cf root flashes successfully but when it come to boot modification it ends with an error
Sent from my C1001 using Tapatalk
Related
Hi everyone,
Roll Back from 513 to 331 all credit for @chudy_85 check the link here
http://forum.xda-developers.com/showpost.php?p=65371195&postcount=207
this is the absolute way to roll back from Marshmallow B511 to any previous version whatever it's a lollipop or kitkat.......
(As usual the risk is on your responsibility)
New edit
Working now on MT7-L09
Thx to pasquyx and Shadow_recruit for testing it on MT7-L09
you should have root on the device
Files you may need:
1- Roll back file (this is the trick)- BOTH MODEL
DRIVE
LINK
UPLOADED
LINK
MEGA
LINK
2- rom B326 for middle east
(MT7-TL10)
LINK
(MT7-L09)
LINK
3- oeminfo file for China (don't worry it will not change the iemi numbers)
LINK
3- FX FILE EXPLORER
https://play.google.com/store/apps/details?id=nextapp.fx
4- FX ROOT ADD
https://play.google.com/store/apps/details?id=nextapp.fx.rr
5- Build.prop file if you device model showing Jazz
(MT7-TL10)
https://mega.nz/#!20QXmKrZ!HYhN_7u0sBc445C_6r6D4ug2HuqdCgM_721ANosUa9g
(MT7-L09) *NEED TO TEST FROM ANY ONE TO CONFIRM IF IT WORKING
https://mega.nz/#!XhxR2BpD!O6xkfX8MR55imidxwNlH9p3r2ugLOYwnM-dheTOQT38
-extract the file what you donloaded for oeminfo on ext sdcard
-open fx file explorer and grant it from SU, go to system root and make sure you mount read-write
-copy oeminfo from the extsdcard to /dev/block/platform/hi_mci0/by name and agree for overwrite, after that select the file and choose security and mark for all "read-write-exec"
-copy custom.bin for extsd to /data then choose security and mark for all "read-write-exec"
-check the country info now by *#*#2846579## if it cn, so you are on the right way
-now make a restart but first you should be on official recovery, if you are not turn off the phone open it again on bootloader and flash the official recovery ten restart
-after restart it should make "optimizing"
-after it finish take the roll back and put it in dload on the extsd
-make a local update ( if you don't have it go to dial and type *#*#2846579#*#* and choose 4)
after you make a local update the roll back should complete 100% because this file is the only roll back that compitable with B511
I promise you it will success with 100%
then put lollipop rom 326 on dload and make local update
and again I promise you it will success with 100%
-if the device didn't open after 10 mins, flash all files for the 326 by fastboot
Boot
Cache
Recovery
Cust
System
Userdata
-now you have a 326 rom but chines version.
-make root again and replace oeminfo and custom.bin for middle east version here then make a restart
LINK
final step is to make a reset from settings
Plz M.bleu amber i am asking if we need to unlock bootloader to apply your methode
Prof1977 said:
Plz M.bleu amber i am asking if we need to unlock bootloader to apply your methode
Click to expand...
Click to collapse
Yes, you should have an unlocked bootloader
Sent from my Nexus 5X using Tapatalk
Can you help me ihave trying but no result when i try they tell me that i have t wait 14 day
Prof1977 said:
Can you help me ihave trying but no result when i try they tell me that i have t wait 14 day
Click to expand...
Click to collapse
yes for sure , send to me your mobile details,
device model
iemi 1
S/N
product id
Huawei mt7 l10
Imei:865164220774779
S/n3F0214A23000186
Product id 09502424
---------- Post added at 12:44 AM ---------- Previous post was at 12:43 AM ----------
Prof1977 said:
Huawei mt7 l10
Imei:865164020774772
S/n3F0214A23000186
Product id 09502424
---------- Post added at 12:44 AM ---------- Previous post was at 12:43 AM ----------
Click to expand...
Click to collapse
suspended sorry
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ok tkinks no problem
Have anyone tried this on L09?
stepi1 said:
Have anyone tried this on L09?
Click to expand...
Click to collapse
Files here only for TL10
Sent from my Nexus 5X using Tapatalk
Yes, i noticed it. Just downloaded all needed files for L09, i will try later and see what happens.
Tried on l09 but it fails in transition package. downloaded all the files from huawei finnish site. Well, i think i just wait for the complete marshmallow image.
there is something with whatsapp notification, because i don't allways get new message notifications and also usb-debug and hisuite dont work. when i enable usb-debug and connect cable, it won't rise flag about permmisions and computer keeps saying that device is unathorized.
Blue.Ember said:
Hi everyone,
this is the absolute way to roll back from Marshmallow B511 to any previous version whatever it's a lollipop or kitkat.......
(As usual the risk is on your responsibility)
*******This Method is tested only on MT7-TL10 (Please don't try the files on this thread on different model number ********
Files you may need:
1- Roll back from lollipop to Kitkat (this is the trick)
DRIVE
LINK
UPLOADED
LINK
MEGA
LINK
2- for me i tired with kitkat rom B119 sp03
LINK
3- extract all file from B119 Sp03 and be ready to flash all of them via (fastboot)
(so may unlock your bootloader and you should have all files for adb and fastboot)
*recovery
*boot
*cache
*cust
*system
*userdata
it's an easy way, no need to change the location or make any special things \\\\\
download the rollback file which I mentioned before, put it on dload on the extSdcard, and make a local update ( if local update not showing for you try a search for HwOUC.zip and flash it with Twrp recovery)
after you make a local update the roll back should complete 100% because this file is the only roll back that compitable with B511
then put what you want kitkat or lollipop rom ( for me I tried with B119sp03 kitakt and it's fail on 40%)
now enter the bootloader mode and flash all img's for the rom which you tried to flash
after finishing it opne on a stock android, so no issue try a factory reset and everything will be normal after that
Edit (important): to prevent the fail on 5% you should check the location on your device by this code
*#*#2846579#*#*
It should be hw/meafnaf (middle east version)
If it showing "file is not found" try to make a reset from settings>>backup/restore
This is important edit due to the update of B511 is for middle east.....
Click to expand...
Click to collapse
Software install failed after Local Update!
letschky said:
Software install failed after Local Update!
Click to expand...
Click to collapse
It's worked for me anyway, I try again maybe there's a problem with the file, wait for the update.
Sent from my Nexus 5X using Tapatalk
Blue.Ember said:
It's worked for me anyway, I try again maybe there's a problem with the file, wait for the update.
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
Ok,Thank you,iám waiting
This is stock recovery for mt7-l09 to back from twrp to stock recovery of b326 5.1.1 in order to install MM.
You can flash stock recovery in fast boot mod if you rooted your device or installed twrp previously:
https://www.dropbox.com/s/ke7xc9ugtiz3zmj/root and stock recovery for mt7 lollipop 5.1.1-1.rar?dl=0
Sent from my JAZZ using Tapatalk
I modified the post again you can try now and it will success
help plzz!!
hello guys. how can i flash stock recovery? i downloaded the stock recovery file but i cant flash it on my phone, idont know why!!!plzz guide me hou to flash it and what program i have to use for flash it ?
i did all step that u said in post 1 , but at the last when i wnat to flash rollback i cant becuse i have TWRP and i cdont know how can i flash stock recovey for 511. plz someone guide me tanx
silentflight711 said:
hello guys. how can i flash stock recovery? i downloaded the stock recovery file but i cant flash it on my phone, idont know why!!!plzz guide me hou to flash it and what program i have to use for flash it ?
i did all step that u said in post 1 , but at the last when i wnat to flash rollback i cant becuse i have TWRP and i cdont know how can i flash stock recovey for 511. plz someone guide me tanx
Click to expand...
Click to collapse
You should go into bootloader mode and open the command window from the folder that contain the stock recovery by pressing Sift from keyboard and right bottom in the mouse and choose open command window here, then type the following
fastboot flash recovery xxx.img
Replace "xxx" with the name of the img
If it showing okay then failed
Try to unlock the bootloader again by typing
fastboot oem unlock 0000000000
Replace 00000 with your unlock code
Then try to flash again
Sent from my Nexus 5X using Tapatalk
Blue.Ember said:
You should go into bootloader mode and open the command window from the folder that contain the stock recovery by pressing Sift from keyboard and right bottom in the mouse and choose open command window here, then type the following
fastboot flash recovery xxx.img
Replace "xxx" with the name of the img
If it showing okay then failed
Try to unlock the bootloader again by typing
fastboot oem unlock 0000000000
Replace 00000 with your unlock code
Then try to flash again
Sent from my Nexus 5X using Tapatalk
Click to expand...
Click to collapse
tanx it solved and recovry stock install. but when i wnat to local update roll back it fail in 5% , and i also cheek the location and it of like this : cn !! so what shuld i do now?
Moto G2 XT1068 OFFICIAL Marshmellow 6.0 Stock ROM Backup with TWRP v3.3.1-0 + New BootLoader v48.87
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Description
View attachment 4025737
View attachment 4025738
What's Working
. Everything!
What's Not Working
. You tell me!
Instructions All Links NO Mirror Plz....
Update Ur Moto G2-XT1068 BootLoader Version 48.87 + Latest Modem Flashing Through PC
1. This will only update your Bootloader and Modem. Your System and Recovery won't be touched.....
2. Download & Install Motorola device manager 2.5.4.exe for correct Usb drivers (choose repair if already installed) LINK
3. Download & Extract it to PC LINK
4. Switch off the phone, after that press & hold [Volume Down & Power Button] release after 5 seconds now ur Bootloader Screen will appear
5. Connect phone to PC , Now will see "USB Connected" on ur phone Bootloader Screen.
6. Open the Folder
7. Click / Open install.bat...........thats it.
FLASHING TWRP
1. Download & Install Motorola device manager 2.5.4.exe for correct Usb drivers (choose repair if already installed) LINK
2. Download TWRP Recovery LINK
3. Download & Extract Fastboot + ADB Folder LINK
4. Copy the TWRP Recovery file inside Fastboot + ADB Folder.
5. Switch off the phone, after that press & hold [Volume Down & Power Button] release after 5 seconds now ur Bootloader Screen will appear
6. Connect phone to PC , Now will see "USB Connected" on ur phone Bootloader Screen.
7. Go inside the Fastboot + ADB Folder Hold "Shift" key & right click inside the folder & click on "Open Command Window Here".
8. Type "fastboot flash recovery TWRP v3.3.1-0 titan.img" & press "Enter" Key.
9. After flashing is complete, Disconnect your Phone.
10. Use Volume Down to scroll to Recovery Option & then press Volume Up to Select Recovery to boot into TWRP Recovery
11. Now u have successfully flashed TWRP Recovery in ur Phone
RESTORE TWRP BACK FILES : [keep phone charge above 70%]
1. After flashing TWRP completely
2. Download TWRP Backup file MEGA LINK
3. Extract in PC then COPY the file in SD Card
4. Go to Recovery by sliding "Swipe to Allow Modification"
5. click on "Wipe" then "advanced wipe"
6. then select [Dalvik/ART Cache,Data,Internal Storage,Cache,System] after that swipe to wipe then click on home button
7. after that select Restore then click on Select Storage
8. select MicroSD Card then press OK now u will see a folder of M Stock ROM TWRP..........click on it
9. after that u will see two option selected then select swipe to RESTORE
10. after that click on Reboot System
11. NOW Reboot will take 10 to 15 min.
Reversed Audio Channel Issue
1. Those who are facing Reversed Audio Channel Issue follow this Guide Others just Ignore it if u r not facing any problem
2. Download the file then extract it and open READ ME file LINK
How to Root
1. Download and Flash Magisk v20.3 from TWRP LINK
2. Install as apk after flashing (Magisk.zip) Magisk Manager v7.5.1 = LINK
Version Information
BootLoader Version : 48.87
Build Number : MPB24.65-34-3
System Version : 24.81.3.titan_retaildsds.retaildsdsall.en.03 retin
ROM OS Version: 6.0 Marshmallow
Based On: Stock Marshmellow Motorola OS
Status: Stable
Enable Multi Window In Stock ROM
1. Just edit build prop file with build prop tweaker as in pic
2. Change build prop edit ro.build.type from 'user' to 'userdebug'
Reserved
it's the final version of marshmallow or the soak from january? How it's working with fb, messenger and chrome? thanks
ditoparlo said:
it's the final version of marshmallow or the soak from january? How it's working with fb, messenger and chrome? thanks
Click to expand...
Click to collapse
yes its Final Version.......
gourabpa said:
yes its Final Version.......
Click to expand...
Click to collapse
tried to restore but selecting my sd card doesn't show the folder twrp. It shows nothing
ditoparlo said:
tried to restore but selecting my sd card doesn't show the folder twrp. It shows nothing
Click to expand...
Click to collapse
1st Open TWRP then connect ur phone into PC copy the folder in sd card then reboot TWRP rECOVERY NOW IT WILL SHOW
i have already installed twrp version 2.8.6.0
will it overwrite it and install 3.0.0.0 instead of 2.8.6.0
please provide a google drive link for the os plzzzzzzzzz
is it different from soak test zip??
i am on soak test zip of mm... installing with mentioned method is ok?
gourabpa said:
roooooot
Click to expand...
Click to collapse
have you tried to root official build >??????
yes or no ???????
if yes than tell is it working or not !!?
shubham1358 said:
i have already installed twrp version 2.8.6.0
will it overwrite it and install 3.0.0.0 instead of 2.8.6.0
Click to expand...
Click to collapse
if u flash through PC then old version will be deleted and instead of new version will take its place.....so dont worry at all
instruction r given above
jkorade said:
please provide a google drive link for the os plzzzzzzzzz
is it different from soak test zip??
i am on soak test zip of mm... installing with mentioned method is ok?
Click to expand...
Click to collapse
i dont about SOAK test but this is OFFICIAL FINAL Build........
yes it will work with the mentioned method above
gourabpa said:
enable multi window in stock rom
1. Just edit build prop file with build prop tweaker as in pic
2. Change build prop edit ro.build.type from 'user' to 'userdebug'
if u dont understand clearly then then video guide is here link
Click to expand...
Click to collapse
bro give me some credits it's my video link
thank's in advanvce
---------- Post added at 05:23 PM ---------- Previous post was at 05:09 PM ----------
gourabpa said:
OFFICIAL PURE FINAL Build Moto G Indian XT1068 Marshmellow 6.0 Stock ROM Backup with TWRP v3.0.0.0
FLASHING TWRP
1. Download & Install Motorola device manager 2.5.4.exe for correct Usb drivers (choose repair if already installed) LINK
2. Download TWRP Recovery Uploaded View attachment 3642705
3. Extract the file and 1st READ Flashing Method given inside the folder
RESTORE TWRP BACK FILES [keep phone charge above 70%]
1. After flashing TWRP completely
2. Download TWRP Backup file via MEGA LINK
3. Extract in PC then COPY the file in SD Card
4. Go to Recovery by sliding "Swipe to Allow Modification"
5. click on "Wipe" then "advanced wipe"
6. then select [Dalvik/ART Cache,Data,Internal Storage,Cache,System] after that swipe to wipe then click on home button
7. after that select Restore then click on Select Storage
8. select MicroSD Card then press OK now u will see a folder of M Stock ROM TWRP..........click on it
9. after that u will see two option selected then select swipe to RESTORE
10. after that click on Reboot System
11. NOW Reboot will take 9 to 10 min.
How to Root
1. Don't flash SuperSU from recovery, it will cause bootloop!
2. Connect your phone in Bootloader mode to PC
3. Download the modified file uploaded View attachment 3642838
4. Extract the file after that open the folder and Run the ROOT.bat file
5. Reboot your phone
6. Download and Flash SuperSU from TWRP LINK
Follow the steps correctly.......then only it will work
Additional Files
Motorola + Cyanogen Boot Animations LINK
Motorola + Cyanogen Boot Logo LINK
Stock M ROM Recovery Image + TWRP v3.0.0.0 Coustom Recovery Image LINK
enjoy
@gourab
Click to expand...
Click to collapse
Root Moto G2 running on 6.0 VIDEO TUTORIAL
https://www.youtube.com/watch?v=hQbx_-QMKm8
sure thanks..........
Whenever I try rooting my device It gets into Boot loop after flashing Super user.
Sent from my XT1068 using Tapatalk
---------- Post added at 11:05 PM ---------- Previous post was at 11:04 PM ----------
I have also flashed the modified img file.
And then only I flashed Super user but then boot loop occurs.
Random reboots.
Help me guys
Sent from my XT1068 using Tapatalk
manojkumar8552 said:
have you tried to root official build >??????
yes or no ???????
if yes than tell is it working or not !!?
Click to expand...
Click to collapse
Root Moto G2 running on 6.0 WORKING
https://youtu.be/hQbx_-QMKm8
mandar91 said:
Root Moto G2 running on 6.0 WORKING
https://youtu.be/hQbx_-QMKm8
Click to expand...
Click to collapse
But I'm unable to.
Coz everytime I do.
My phones goes to boot loop
sura14 said:
but i'm unable to.
Coz everytime i do.
My phones goes to boot loop
Click to expand...
Click to collapse
you are using br retail moto g 2014?
mandar91 said:
you are using br retail moto g 2014?
Click to expand...
Click to collapse
Nope Indian Moto G 2014 aka XT1068
sura14 said:
But I'm unable to.
Coz everytime I do.
My phones goes to boot loop
Click to expand...
Click to collapse
same problem here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
____
____
More Colors in download link
Hello!
The following provides info, instructions, download links, and credits
INFO
FIle info - Based on 3.0.2-2 official. So it supports both lollipop and marshamallow.
Why This Version?
This TWRP theme will stay even after a wipe or reset, and is more stable to use.
TWRP - Team Win Recovery Project, is an open source, community project. It is a custom recovery used for installing custom software on your device.
Instructions
First of all, please note that you can brick and totally destroy your device, if you do not follow these instructions correctly. And you will be solely responsible for the damage.
Option 1 - If you already have TWRP installed
1. Download Materialized_TWRP.img - Download Link below
2. Boot into TWRP
3. Go to Install
4. Select Install Image
5. Go to location of Material_TWRP.img and tap on it.
6. Choose Recovery [IMPORTANT]
7. Swipe and Reboot TWRP
8. Enjoy!
Option 2 - If you don't already have TWRP
1. Download Materialized_TWRP.img - Download Link below
2. Get Minimal ADB & Fastboot from here.
3. Install it!
4. Copy the Materialized_TWRP.img to ADB & Fastboot folder
5. Make sure your tablet is unlocked and that you have Fastboot drivers.
6. Poweroff tablet
7. Boot into bootloader by holding the volume down button and tapping the power button once while still holding the volume button.
8. Now open ABD and Fastboot folder, and right click while holding the shift button. This will show the option "Open Command Windows here"
9. Plug in your tablet using a wire.
10. In the command window type "fastboot flash recovery Materialized_TWRP.img" without the quotations.
11. Once done, choose recovery mode from the menu in tablet.
12. Enjoy!
Download Link
Material Light
Play
Changelog
1.4 - Now uses theme v4
1.3 - Added Option "Use accent color for navbar" for Play Theme
1.2 - Added Material Light Theme
1.1 - Removed Change Splash and Change Theme from theme settings
1.0 - Initial Release
Credits
TeamWin - For the TWRP
z31s1g - For the beautiful theme
osm0sis - For Android Image Kitchen
if I forgot you please forgive me and PM me
Great can't wait to download and installed as soon as I get home will do and tested.
Sent from my SM-G935F using XDA-Developers mobile app
Earlier 3.x versions of TWRP had some touch issues on the Shield. Is this fixed now?
undrwater said:
Earlier 3.x versions of TWRP had some touch issues on the Shield. Is this fixed now?
Click to expand...
Click to collapse
Yes! Since this is based on a official TWRP (3.0.2-2) it works. It also works on marshmallow without any touch problems.
I just downloaded the file and try to flash it with two 3.0.2-2 and I did as the instructions said, install; install image, location of material TWRP img choose recovery, swipe and reboot and then I get thrown in to download mode phone will not boot in to recovery nor system I got to Odin flash recovery to get back to system. I don't know if I'm doing something wrong please let me know I'll love to try this.
Sent from my SM-G935F using XDA-Developers mobile app
---------- Post added at 03:17 AM ---------- Previous post was at 03:16 AM ----------
velocajigas said:
I just downloaded the file and try to flash it with twrp 3.0.2-2 and I did as the instructions said, install; install image, location of material TWRP img choose recovery, swipe and reboot and then I get thrown in to download mode phone will not boot in to recovery nor system I got to Odin flash recovery to get back to system. I don't know if I'm doing something wrong please let me know I'll love to try this.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Sent from my SM-G935F using XDA-Developers mobile app
---------- Post added at 03:25 AM ---------- Previous post was at 03:17 AM ----------
Guys I'm really sorry because I didn't read the title off the post did not realize it was for a Nvidia shield tablet I have a galaxy s5 thank God nothing worse happen, still a great work.
Sent from my SM-G935F using XDA-Developers mobile app
Some feedback would be appreciated!
Flashed. Looks good and works well.
One critique from my limited use: Add more contrast to the "swipe to unlock" when the screen times out. It was hard to identify the slider as it is pretty well hidden by the background.
undrwater said:
Flashed. Looks good and works well.
One critique from my limited use: Add more contrast to the "swipe to unlock" when the screen times out. It was hard to identify the slider as it is pretty well hidden by the background.
Click to expand...
Click to collapse
Thanks for the Feedback! I'll try to do what I can about this. :good:
You can also disable timeout in settings, if you don't like that
undrwater said:
Add more contrast to the "swipe to unlock" when the screen times out.
Click to expand...
Click to collapse
Which slider are you talking about, the install, backup, restore, advanced, file manager, wipe, or default
The unlock slider when the screen times out
Stay Tuned! an updates coming within a few days
Cant access them the new colours?
skooter32 said:
Cant access them the new colours?
Click to expand...
Click to collapse
You can't download them or they don't work?
Abbas_11 said:
You can't download them or they don't work?
Click to expand...
Click to collapse
Can't download
skooter32 said:
Can't download
Click to expand...
Click to collapse
Download the attached zip file, it includes a document with pics on how to download.
I'm pretty sure you have some other problem, but still
Abbas_11 said:
Download the attached zip file, it includes a document with pics on how to download.
I'm pretty sure you have some other problem, but still
Click to expand...
Click to collapse
No need to be smart bud
So, is the problem fixed or no? If not then I can create alternate link
HELP!!!!!
Im trying to install the xposed sdk23 v86 and i even tried the v80 that worked before but since i updated to 4.2 im finally adding all my mods and stuff and i havent done that since 4.0 update but anyways both packages while installing the zip file in twrp i get
UPDATER PROCESS ENDED WITH ERROR 1
Can someone help me?
Are you using "arm"
Thank you!!! Very nice work!
Hello
I successfully rooted my zenfone ze551ml with official android 6
Requirements:
1. Unlocked bootloader
2. TWRP for Z00A Download
Unlock Bootloader on Android 6.0 Marshmallow ZenFone 2 ZE551ML/ZE550ML
Download tool (Download Here)
Extract it and connect Zenfone 2 with laptop/pc
Click unlock.bat will automatically detect whether the adb or fastboot mode, and then reboot into bootloader
Will appear on the screen to unlock the success of mobile phones after five seconds will reboot, then hold volume up the phone automatically re-boot back to bootloader.
If you missed the previous step, press the power button for 10 seconds off, then press the "Volume Up" and hold the power button to boot into bootloader.
(( Now Your mobile can't boot. ))
Now flash twrp recovery (( fastboot flash recovery twrp.img ))
then install this file Magisk-v6_repack_for_zf2_601.zip and phh-superuser-17-magisk-x86-fix.zip and if you need Xposed
After install them reboot to fastboot again and click restore.bat ( in bootloader folder ) on the computer, where the restore refers to the restore Android ifwi 6.0 otherwise Android phone can not enter the system.
The phone will reboot and restore white on black ASUS logo screen, and then enter the Android system.
Now install this apps Magisk Manager v1.2 App and phh's SuperUser App and Material's the Design Xposed the App Installer ( if you install xposed )
Now Your system rooted and xposed
Note: In the first of starting the system you'll show warning message, ignore it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
source
Thanks
quick05 said:
Thanks
Click to expand...
Click to collapse
Welcome
hello, is there any way to disable the warning message? it's kinda annoying that it shows everytime i boot up.
Sent from my ASUS_Z00AD using XDA-Developers mobile app
phone not going in recovery after that what can i do??
This require unlocked bootloader in lollipop?
nikhil12598 said:
phone not going in recovery after that what can i do??
Click to expand...
Click to collapse
You have to enter in bootloader and reflash stock recovery. You can find it into original MM firmware
Remove warning
I followed the instruction of the post, everything worked well, but I get an error message each boot, how can we remove
Davideneco said:
I followed the instruction of the post, everything worked well, but I get an error message each boot, how can we remove
Click to expand...
Click to collapse
Read the last line of the OP again!
Everything went perfect for me. Root and exposed all works. But recovery is now gone! I can only get to bootloader.
My ze551ml is neither rooted nor has recovery using this, and i followed everything to the letter.
I removed root before i upgraded to 6.0
EDIT: Never minds, im a F*#*#[email protected] idiot....
has to boot into recovery mode after flashing the img, and THEN install the zips (not install zips from fastboot)
THANK YOU VERY MUCH!!!
So I downloaded Gravitybox and installed it. Then activated and rebooted. After the reboot, no more xposed framework, no more root. What the heck?
kenbo111 said:
So I downloaded Gravitybox and installed it. Then activated and rebooted. After the reboot, no more xposed framework, no more root. What the heck?
Click to expand...
Click to collapse
GravityBox worked great for me, are you sure you installed GravityBox[MM] not the previous GravityBox[LP]?
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Yes I did. I just went back and repeated the steps from the post and reflashed just the magisk and superuser. When I rebooted all three were working again. Even gravitybox.
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 12:06 AM ---------- Previous post was at 12:05 AM ----------
I still need to reflash stock recovery. Do I need to unlock again to do that?
Sent from my ASUS_Z00AD using Tapatalk
kenbo111 said:
Everything went perfect for me. Root and exposed all works. But recovery is now gone! I can only get to bootloader.
Click to expand...
Click to collapse
If you need the recovery run unlock.bat again and the twrp will work again. Then do what you want in recovery then run restore.bat again to make your device bootable.
The recovery will work even after restore.bat is executed if it is signed with mm signature keys.
http://forum.xda-developers.com/zenfone2/general/guide-flash-custom-unlocked-mm6-0-t3424867
Edit: I mean TWRP
Sent from my ASUS_Z00A using Tapatalk
---------- Post added at 03:39 PM ---------- Previous post was at 03:24 PM ----------
Is topjohnwu's official Magisk + Systemless xposed and root works with zf2
Sent from my ASUS_Z00A using Tapatalk
A more permanent solution can be found here: https://www.youtube.com/watch?v=fDls4gLyusY
But if you want a newer version of twrp dl it from here: http://theflamingskull.com/downloads/z00a/MM_BL_STUFF/
neither of these are mine. Just spreading the word.
thank u!
kenbo111 said:
Everything went perfect for me. Root and exposed all works. But recovery is now gone! I can only get to bootloader.
Click to expand...
Click to collapse
Same with me
Kapil Tapsi said:
Same with me
Click to expand...
Click to collapse
If you unlock again twrp will be there. But a better solution is in my post 3 up from this one.
Sent from my ASUS_Z00AD using Tapatalk
Hello,
I have seen a lot of guys asking for help regarding the OTA failure on K5 Plus. I am using the 3 GB variant of A6020a46. To make life a lot easier, I have decided to show you how install the OTA without errors or rescue incase of any failures.
Code:
/*
* Disclaimer
*
* I am not responsible for bricked devices, dead SD cards or
* thermonuclear war. Please do some research before attempting
* this procedure. The firmwares provided below are from official Lenovo
* servers and is provided as it is. The procedure has been tested
* only on 3 GB variant of Lenovo Vibe K5 Plus and no issues has
* been observed. You are totally on your own. If you point the
* finger at me for messing up your device, I will laugh at you.
*
*/
Things Required:
First of all, make sure you have these:
A6020a46_USR_S045_1606082200_Q1021101.2_BMAIN_16G_ROW.zip - Full ROM
A6020a46_S045_160608_ROW_TO_A6020a46_S056_161019_16G_ROW_WCE40BC597.zip - OTA
A6020a46_S056_161019_ROW_TO_A6020a46_S105_161124_ROW_WC2272CE3C.zip - Latest VoLTE OTA
QPST(Contains QFIL)
Qualcomm Drivers(Signed)
Make sure you follow these steps exactly
This tutorial has two stages - If your phone is brand new: proceed to step - b. If you have messed up following the tutorials online, forget everything and start from step - a:
a) Flashing with Fresh Stock ROM(requires PC)
Install the drivers and QPST without any errors(Sometimes you may need to disable Driver Signature Check, Google how to do it)
Charge your device fully or atleast 75%
Extract the S045 version to the clean location. Try to keep the path as simple as possible.
Open the QFIL application
Press both Volume + and - together and connect your phone
The red LED will glow and your PC will detect the phone
On QFIL, It will show as qualcomm hs-usb qdloader 9008 <COM PORT>
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now select Flat Build radio button
Click on the browse button and select prog_emmc_firehose_8936.mbn
Click Load XML and choose rawprogram_unsparse.xml and patch0.xml files
Click Download and the flashing will begin.
Be patient, it will take upto 15 minutes
After the flashing is complete, you will see the blue text: DOWNLOAD SUCCESSFUL
Disconnect the phone from the PC
Now press the power button and wait for the phone to boot up(Be patient, first boot will take longer)
Don't insert sim / sdcard yet
Once you see welcome screen, just do basic configs and reach the home screen
This is the tricky part! Don't do any configs or settings...
At this stage, when you type ####6020#, it will show you default - This is completely normal
Now follow the procedure a) above
b) Updating the phone with OTA
You may get OTA on your phone or when turning on the brand new one
Make sure you are on stock firmware and NOT rooted
Charge your device for about 75%
Download the OTA from above links
Extract the zip for these files: India2Default.ota.zip, India.ota.zip, System.zip
First flash S056 and then S105
Switch OFF the phone and reboot into recovery(Press Vol +, Vol - and Power together)
Follow this order while flashing: India2Default.ota.zip -> System.zip -> India.ota.zip
Choose install update from sdcard and select the OTA zip & confirm.
It will take about 15-20 minutes for the each of the OTA to install
After update, phone will reboot automatically
Be very patient, first boot will take a bit longer
Congrats, your phone has been updated! Enjoy!
S105 is the VoLTE update and latest at the time of writing this tutorial
Please press thanks instead of posting thanks.
DO NOT COPY/PASTE THIS ANYWHERE, respect my time spent on this.
Part b, much easier using Lenovo Moto Smart Assistant device rescue...
Anyway, solid effort, keep up the pace.
nlooooo said:
Part b, much easier using Lenovo Moto Smart Assistant device rescue...
Anyway, solid effort, keep up the pace.
Click to expand...
Click to collapse
Indeed, just wanted to try the native way... Moto assisstant was crashing, giving errors sometimes while downloading roms. Thanks.
Wow, just the thing I was looking for. Great work and thanks @irfanjunaid
Sent from my Lenovo Vibe K5 Plus using XDA Labs
Hi goku, vegeta here ?
Hi,
Pls help me. My device is running on lineage 14.1 (7.1.2) 20170514
Issues :
1- VOLTE (unable to call via my 4g sim that support VOLTE )
2- network issue
Pls help me..
ashyprinia said:
Hi,
Pls help me. My device is running on lineage 14.1 (7.1.2) 20170514
Issues :
1- VOLTE (unable to call via my 4g sim that support VOLTE )
2- network issue
Pls help me..
Click to expand...
Click to collapse
It is still a Work-In-Progress... They are using Lollipop blobs...
hey,
can you tell me how to restore stock rom and bootloader on my lenovo k5 a6020a40?
georgh1991 said:
hey,
can you tell me how to restore stock rom and bootloader on my lenovo k5 a6020a40?
Click to expand...
Click to collapse
I don't own that device...
Even after following the procedure, when I try to install the OTA zip, it still gives me the error that my device can't switch carriers.
iamffj said:
Even after following the procedure, when I try to install the OTA zip, it still gives me the error that my device can't switch carriers.
Click to expand...
Click to collapse
Unzip OTA Zip. Flash Region Zip (E.g: India.ota.zip) and then System.zip
ChonDoit said:
Unzip OTA Zip. Flash Region Zip (E.g: India.ota.zip) and then System.zip
Click to expand...
Click to collapse
Yeah, figured that out myself a few hours back. It worked. Thank you anyway for trying to help out.
Bro can u provide the exact steps to update.. I'm getting error.. Please help me out
---------- Post added at 11:51 AM ---------- Previous post was at 11:22 AM ----------
Should I flash in stock recovery or custom recovery?
---------- Post added at 11:52 AM ---------- Previous post was at 11:51 AM ----------
iamffj said:
Yeah, figured that out myself a few hours back. It worked. Thank you anyway for trying to help out.
Click to expand...
Click to collapse
Please tell me the steps brob
Joysharoon said:
Bro can u provide the exact steps to update.. I'm getting error.. Please help me out
---------- Post added at 11:51 AM ---------- Previous post was at 11:22 AM ----------
Should I flash in stock recovery or custom recovery?
---------- Post added at 11:52 AM ---------- Previous post was at 11:51 AM ----------
Please tell me the steps brob
Click to expand...
Click to collapse
Will only work if you have not/do not insert(ed) a SIM (yet).
If you've finished flashing the stock firmware and still aren't able to update your phone, download the two ota zip files from the original post, extract the "S045" archive to a folder and copy two files from here viz. "system.zip" and "your_region.zip" e.g. France.zip (the one with default in the name is not needed) and place them in your phone's memory card or internal storage. Now, shut down your phone and start it with all buttons pressed (Vol up + Vol down + power), it'll bring up the recovery menu. If you have stock recovery, press "apply update from sd card" and select "your_region.zip" file. It should flash and reboot the device. After the phone boots up, go to dialer, type in ####6020#, it'll bring up a menu (takes some time), here your region should appear, press on it and just exit ( do not press anything else). Now shut down your device again and start it into recovery mode again, this time flash the "system.zip" file. It'll take some time. It'll reboot phone. Delete both the files from your phone. After this is done, follow the same procedure with the "S056" archive, but this time you'll only need to flash it's "system.zip" file. You'll have VoLTE support now. Enjoy.
I have twrp recovery.. Can u do it in twrp also?
---------- Post added at 01:32 PM ---------- Previous post was at 01:21 PM ----------
Can I do the following steps in twrp recovery?
---------- Post added at 02:27 PM ---------- Previous post was at 01:32 PM ----------
Bro I'm getting error while flashing the system zip
Hey, sorry guys! I was away due to my work. I recommended this device for my friend & he bought it. He was testing Lineage OS and decided to roll back to stock ROM. We noticed that we need to update the device in a tricky way. We flashed the device through PC but could not update it via OTA due to some errors with carrier switching. After some research, found that we need to extract the OTA zip and flash the files in this order: India2Default.ota.zip -> System.zip -> India.ota.zip. This time it was 100% successful and completed without errors. I just updated my post! Strange that I didn't get these errors
Joysharoon said:
I have twrp recovery.. Can u do it in twrp also?
Can I do the following steps in twrp recovery?
Bro I'm getting error while flashing the system zip
Click to expand...
Click to collapse
@Joysharoon You may try the above procedure... Never tried with TWRP, but it works smoothly with stock recovery...
I'm on A6020a46_S056_161019_ROW which one should I flash???
Joysharoon said:
I'm on A6020a46_S056_161019_ROW which one should I flash???
Click to expand...
Click to collapse
S105 ofcourse! Don't forget the flashing order...
irfanjunaid said:
S105 ofcourse! Don't forget the flashing order...
Click to expand...
Click to collapse
So first I should flash S105 full rom through QFIL and then follow these steps ?
Updating the phone with OTA
You may get OTA on your phone or when turning on the brand new one
Make sure you are on stock firmware and NOT rooted
Charge your device for about 75%
Download the OTA from above links
Extract the zip for these files: India2Default.ota.zip, India.ota.zip, System.zip
First flash S056 and then S105
Switch OFF the phone and reboot into recovery(Press Vol +, Vol - and Power together)
Follow this order while flashing: India2Default.ota.zip -> System.zip -> India.ota.zip
Choose install update from sdcard and select the OTA zip & confirm.
It will take about 15-20 minutes for the each of the OTA to install
After update, phone will reboot automatically
Be very patient, first boot will take a bit longer
Congrats, your phone has been updated! Enjoy!
S105 is the VoLTE update and latest at the time of writing this tutorial
@Joysharoon S056 and S105 are OTA updates and can't be flashed through QFIL. Don't make it too hard! First flash S045 through PC. Then extract these files: India2Default.ota.zip, India.ota.zip, System.zip from the OTA into separate folders and copy them to sdcard. Now boot into stock recovery and flash them...
Order
S045 - PC flash
S056 - OTA (Recovery flash)
S105 - OTA (Recovery flash)