Hello
I successfully rooted my zenfone ze551ml with official android 6
Requirements:
1. Unlocked bootloader
2. TWRP for Z00A Download
Unlock Bootloader on Android 6.0 Marshmallow ZenFone 2 ZE551ML/ZE550ML
Download tool (Download Here)
Extract it and connect Zenfone 2 with laptop/pc
Click unlock.bat will automatically detect whether the adb or fastboot mode, and then reboot into bootloader
Will appear on the screen to unlock the success of mobile phones after five seconds will reboot, then hold volume up the phone automatically re-boot back to bootloader.
If you missed the previous step, press the power button for 10 seconds off, then press the "Volume Up" and hold the power button to boot into bootloader.
(( Now Your mobile can't boot. ))
Now flash twrp recovery (( fastboot flash recovery twrp.img ))
then install this file Magisk-v6_repack_for_zf2_601.zip and phh-superuser-17-magisk-x86-fix.zip and if you need Xposed
After install them reboot to fastboot again and click restore.bat ( in bootloader folder ) on the computer, where the restore refers to the restore Android ifwi 6.0 otherwise Android phone can not enter the system.
The phone will reboot and restore white on black ASUS logo screen, and then enter the Android system.
Now install this apps Magisk Manager v1.2 App and phh's SuperUser App and Material's the Design Xposed the App Installer ( if you install xposed )
Now Your system rooted and xposed
Note: In the first of starting the system you'll show warning message, ignore it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
source
Thanks
quick05 said:
Thanks
Click to expand...
Click to collapse
Welcome
hello, is there any way to disable the warning message? it's kinda annoying that it shows everytime i boot up.
Sent from my ASUS_Z00AD using XDA-Developers mobile app
phone not going in recovery after that what can i do??
This require unlocked bootloader in lollipop?
nikhil12598 said:
phone not going in recovery after that what can i do??
Click to expand...
Click to collapse
You have to enter in bootloader and reflash stock recovery. You can find it into original MM firmware
Remove warning
I followed the instruction of the post, everything worked well, but I get an error message each boot, how can we remove
Davideneco said:
I followed the instruction of the post, everything worked well, but I get an error message each boot, how can we remove
Click to expand...
Click to collapse
Read the last line of the OP again!
Everything went perfect for me. Root and exposed all works. But recovery is now gone! I can only get to bootloader.
My ze551ml is neither rooted nor has recovery using this, and i followed everything to the letter.
I removed root before i upgraded to 6.0
EDIT: Never minds, im a F*#*#[email protected] idiot....
has to boot into recovery mode after flashing the img, and THEN install the zips (not install zips from fastboot)
THANK YOU VERY MUCH!!!
So I downloaded Gravitybox and installed it. Then activated and rebooted. After the reboot, no more xposed framework, no more root. What the heck?
kenbo111 said:
So I downloaded Gravitybox and installed it. Then activated and rebooted. After the reboot, no more xposed framework, no more root. What the heck?
Click to expand...
Click to collapse
GravityBox worked great for me, are you sure you installed GravityBox[MM] not the previous GravityBox[LP]?
Sent from my ASUS_Z00AD using XDA-Developers mobile app
Yes I did. I just went back and repeated the steps from the post and reflashed just the magisk and superuser. When I rebooted all three were working again. Even gravitybox.
Sent from my ASUS_Z00AD using Tapatalk
---------- Post added at 12:06 AM ---------- Previous post was at 12:05 AM ----------
I still need to reflash stock recovery. Do I need to unlock again to do that?
Sent from my ASUS_Z00AD using Tapatalk
kenbo111 said:
Everything went perfect for me. Root and exposed all works. But recovery is now gone! I can only get to bootloader.
Click to expand...
Click to collapse
If you need the recovery run unlock.bat again and the twrp will work again. Then do what you want in recovery then run restore.bat again to make your device bootable.
The recovery will work even after restore.bat is executed if it is signed with mm signature keys.
http://forum.xda-developers.com/zenfone2/general/guide-flash-custom-unlocked-mm6-0-t3424867
Edit: I mean TWRP
Sent from my ASUS_Z00A using Tapatalk
---------- Post added at 03:39 PM ---------- Previous post was at 03:24 PM ----------
Is topjohnwu's official Magisk + Systemless xposed and root works with zf2
Sent from my ASUS_Z00A using Tapatalk
A more permanent solution can be found here: https://www.youtube.com/watch?v=fDls4gLyusY
But if you want a newer version of twrp dl it from here: http://theflamingskull.com/downloads/z00a/MM_BL_STUFF/
neither of these are mine. Just spreading the word.
thank u!
kenbo111 said:
Everything went perfect for me. Root and exposed all works. But recovery is now gone! I can only get to bootloader.
Click to expand...
Click to collapse
Same with me
Kapil Tapsi said:
Same with me
Click to expand...
Click to collapse
If you unlock again twrp will be there. But a better solution is in my post 3 up from this one.
Sent from my ASUS_Z00AD using Tapatalk
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
____
____
More Colors in download link
Hello!
The following provides info, instructions, download links, and credits
INFO
FIle info - Based on 3.0.2-2 official. So it supports both lollipop and marshamallow.
Why This Version?
This TWRP theme will stay even after a wipe or reset, and is more stable to use.
TWRP - Team Win Recovery Project, is an open source, community project. It is a custom recovery used for installing custom software on your device.
Instructions
First of all, please note that you can brick and totally destroy your device, if you do not follow these instructions correctly. And you will be solely responsible for the damage.
Option 1 - If you already have TWRP installed
1. Download Materialized_TWRP.img - Download Link below
2. Boot into TWRP
3. Go to Install
4. Select Install Image
5. Go to location of Material_TWRP.img and tap on it.
6. Choose Recovery [IMPORTANT]
7. Swipe and Reboot TWRP
8. Enjoy!
Option 2 - If you don't already have TWRP
1. Download Materialized_TWRP.img - Download Link below
2. Get Minimal ADB & Fastboot from here.
3. Install it!
4. Copy the Materialized_TWRP.img to ADB & Fastboot folder
5. Make sure your tablet is unlocked and that you have Fastboot drivers.
6. Poweroff tablet
7. Boot into bootloader by holding the volume down button and tapping the power button once while still holding the volume button.
8. Now open ABD and Fastboot folder, and right click while holding the shift button. This will show the option "Open Command Windows here"
9. Plug in your tablet using a wire.
10. In the command window type "fastboot flash recovery Materialized_TWRP.img" without the quotations.
11. Once done, choose recovery mode from the menu in tablet.
12. Enjoy!
Download Link
Material Light
Play
Changelog
1.4 - Now uses theme v4
1.3 - Added Option "Use accent color for navbar" for Play Theme
1.2 - Added Material Light Theme
1.1 - Removed Change Splash and Change Theme from theme settings
1.0 - Initial Release
Credits
TeamWin - For the TWRP
z31s1g - For the beautiful theme
osm0sis - For Android Image Kitchen
if I forgot you please forgive me and PM me
Great can't wait to download and installed as soon as I get home will do and tested.
Sent from my SM-G935F using XDA-Developers mobile app
Earlier 3.x versions of TWRP had some touch issues on the Shield. Is this fixed now?
undrwater said:
Earlier 3.x versions of TWRP had some touch issues on the Shield. Is this fixed now?
Click to expand...
Click to collapse
Yes! Since this is based on a official TWRP (3.0.2-2) it works. It also works on marshmallow without any touch problems.
I just downloaded the file and try to flash it with two 3.0.2-2 and I did as the instructions said, install; install image, location of material TWRP img choose recovery, swipe and reboot and then I get thrown in to download mode phone will not boot in to recovery nor system I got to Odin flash recovery to get back to system. I don't know if I'm doing something wrong please let me know I'll love to try this.
Sent from my SM-G935F using XDA-Developers mobile app
---------- Post added at 03:17 AM ---------- Previous post was at 03:16 AM ----------
velocajigas said:
I just downloaded the file and try to flash it with twrp 3.0.2-2 and I did as the instructions said, install; install image, location of material TWRP img choose recovery, swipe and reboot and then I get thrown in to download mode phone will not boot in to recovery nor system I got to Odin flash recovery to get back to system. I don't know if I'm doing something wrong please let me know I'll love to try this.
Sent from my SM-G935F using XDA-Developers mobile app
Click to expand...
Click to collapse
Sent from my SM-G935F using XDA-Developers mobile app
---------- Post added at 03:25 AM ---------- Previous post was at 03:17 AM ----------
Guys I'm really sorry because I didn't read the title off the post did not realize it was for a Nvidia shield tablet I have a galaxy s5 thank God nothing worse happen, still a great work.
Sent from my SM-G935F using XDA-Developers mobile app
Some feedback would be appreciated!
Flashed. Looks good and works well.
One critique from my limited use: Add more contrast to the "swipe to unlock" when the screen times out. It was hard to identify the slider as it is pretty well hidden by the background.
undrwater said:
Flashed. Looks good and works well.
One critique from my limited use: Add more contrast to the "swipe to unlock" when the screen times out. It was hard to identify the slider as it is pretty well hidden by the background.
Click to expand...
Click to collapse
Thanks for the Feedback! I'll try to do what I can about this. :good:
You can also disable timeout in settings, if you don't like that
undrwater said:
Add more contrast to the "swipe to unlock" when the screen times out.
Click to expand...
Click to collapse
Which slider are you talking about, the install, backup, restore, advanced, file manager, wipe, or default
The unlock slider when the screen times out
Stay Tuned! an updates coming within a few days
Cant access them the new colours?
skooter32 said:
Cant access them the new colours?
Click to expand...
Click to collapse
You can't download them or they don't work?
Abbas_11 said:
You can't download them or they don't work?
Click to expand...
Click to collapse
Can't download
skooter32 said:
Can't download
Click to expand...
Click to collapse
Download the attached zip file, it includes a document with pics on how to download.
I'm pretty sure you have some other problem, but still
Abbas_11 said:
Download the attached zip file, it includes a document with pics on how to download.
I'm pretty sure you have some other problem, but still
Click to expand...
Click to collapse
No need to be smart bud
So, is the problem fixed or no? If not then I can create alternate link
HELP!!!!!
Im trying to install the xposed sdk23 v86 and i even tried the v80 that worked before but since i updated to 4.2 im finally adding all my mods and stuff and i havent done that since 4.0 update but anyways both packages while installing the zip file in twrp i get
UPDATER PROCESS ENDED WITH ERROR 1
Can someone help me?
Are you using "arm"
Thank you!!! Very nice work!
Install CM14 for OnePlus X (The Unofficial)
** How to Install TWRP for the 3.1.0 version you installed Oxygen.
B1: Starting Fastboot mode by turning off the power on. Then hold down + to the source.
Step 2: Install the driver and connect to the computer (HD drivers installed on the network to find it)
B3: Run cmd (run -> cmd) command fastboot boot attachments and enter this download Mod edit link removed
B4: boot into TWRP Self.
** The Stock 2.2.2 ROM you are using the network attempt to open up the OEM and then down Flashfy unbootloader install TWRP on CM ROMs directly or similar 13 and then into TWRP always offline.
** Note: Back up your data before doing us avoid errors arising restore offline.
** Download ROM CM 14: Mod edit link removed
** Link Download Grapps:Mod edit link removed
** Conducted into TWRP and wipe data, cache partitioning, Dalvik Cache. Flash ROM + Grapps and restart.
This is an experiment with me what errors arise not responsible. For those you love to dabble and discourage those you do not know and do not understand anything. People are already getting a bit bored Android does not dabble to dabble like new. : D
Path: Mod edit link removed
Vietnamses : Mod edit link removed
downloading, will report back soon.
Cam on
Thanks much
Post some screenshots.
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Well, this is interesting.. The step-by-step guide is a bit confusing though. I will download and try the 'ol good method of flashing ROM, gapps and supersu. Hope it works!
namquang93 said:
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Click to expand...
Click to collapse
can u mirror it? litle bit confusing
Sent from my ONE E1003 using XDA-Developers mobile app
be_are said:
can u mirror it? litle bit confusing
Sent from my ONE E1003 using XDA-Developers mobile app
Click to expand...
Click to collapse
here you go: https://drive.google.com/file/d/0B_Km0FbYnea1aDdIaTEydElhUkk/view?usp=sharing
twrp has not made it to 3 ox you have to use a downgrade to get a fresh start using unbrick method, (keep flashable backup via flashify) get twrp installed with the new (old) boot loader, flash cm14+ext. and you are done.
if you had cm13 or the likes, please confirm if you CAN upgrade to 14 before ox people start trying to install without knowing if it even has android 6 (last update i saw on the branch was from june 7 so idk)
teamwin does not have twrp for the ox 3 on oneplus x yet (on their releases anyway) so you have to follow some other process to downgrade to a twrp'able os (and a backup) before trying yo install this
if i see any info from people who have been able to update (and if it has android 7) i'll try to make a video on the process (in white, Texan english)
Please remove this page.
namquang93 said:
failed to flash twrp ox 3.1 (https://www.fshare.vn/file/8AH9KRVS4URW). I tried flash it using twrp 3.0.2.0, but failed too
Click to expand...
Click to collapse
Did you try boot into it:
> fastboot boot twrp_for_ox_3.1.0.img
Seems like the guide says you have to boot into it, not flash it.
ksigit said:
Did you try boot into it:
> fastboot boot twrp_for_ox_3.1.0.img
Seems like the guide says you have to boot into it, not flash it.
Click to expand...
Click to collapse
You're right. I tried fastboot boot twrp_for_ox_3.1.0.img instead of fastboot flash recovery twrp_for_ox_3.1.0.img and it booted into twrp_for_ox_3.1.0. But it still return an error when flash CM14, the same of twrp 3.0.2.0.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
namquang93 said:
You're right. I tried fastboot boot twrp_for_ox_3.1.0.img instead of fastboot flash recovery twrp_for_ox_3.1.0.img and it booted into twrp_for_ox_3.1.0. But it still return an error when flash CM14, the same of twrp 3.0.2.0.
Click to expand...
Click to collapse
Looks like a successful install to me. Could you provide twrp logs?
With whose permission did you post this build here ? Don't you think there was a reason that even after a complete build of CM14 it was still not posted to the forums ?
I am asking you, as politely as possible, to remove the links and this fake procedure, when N is ready, it will be shared, you might find phony builds or legit but non working ones on the interweebz, that doesn't mean it gives you the right to share it just because you think its cool, because its not.
Take it down.
EDIT: Sure, if you build yourself and want to share it then you're more than welcome.
And then they will cry if things are broken !! Take it down folk !
Sent from my ONE E1003 using XDA-Developers mobile app
This Build was just a test build, what made u think that i will not post it here on xda if the rom booted? We, the team are working to make it work but yeah dont post the builds from afh here, will update u all for sure when its done. I think it was my mistake to not to make that build private. -_-
It flashes successfully but doesn't boot, goes back into recovery. Still, great work.
congrats for succesfull starter build
hats off !!!!! to you guys ([/B]developers off this rom) :good:
Flashed with/without gapps. Doesn't boot - goes back 2 recovery
foster095 said:
Flashed with/without gapps. Doesn't boot - goes back 2 recovery
Click to expand...
Click to collapse
Kindly refer to the developer's post, POST #16
I just got a 250 MBs update on my galaxy note 4 N910t.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N910T using Tapatalk
http://www.sammobile.com/2016/10/23...nance-update-for-the-galaxy-note-4-in-europe/
I took the plunge. It's a lot less buggy and battery drain is not near as bad. I almost sold this thing.
Rootable?
Cf auto root?
Sent from my SM-N910T using Tapatalk
ubigred said:
Rootable?
Cf auto root?
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
Systemless root works fine for me.
Uploading the tar to AFH will update the other thread.
DeeXii said:
Uploading the tar to AFH will update the other thread.
Click to expand...
Click to collapse
did u upload Oct MM security patch firmware upfate I wanna flash it on my t910w8 Canadian.....waiting for it thanks
MDHACK said:
Systemless root works fine for me.
Click to expand...
Click to collapse
Would you please give a quick description of the process/tools you used to accomplish this so that others may duplicate your success?
Also, what recovery are you using?
Thank you.
Fat Rat Bastard said:
Would you please give a quick description of the process/tools you used to accomplish this so that others may duplicate your success?
Also, what recovery are you using?
Thank you.
Click to expand...
Click to collapse
1. Update through OTA or flash Odin files.
2. Flash TWRP through Odin.
3. Flash latest Chainfire's SuperSu Systemless root on TWRP.
4. Enjoy!
https://www.androidfilehost.com/?fid=385035244224387215
Has anyone ever updated while they had an app like EZ Package Disabler installed with the apps disabled? I updated this morning and forgot to enable the apps before the update. It's working fine right now, just wondering if there would be a problem since the app says to enable apps before doing an update.
I just tried to flash TWRP using Odin. After restarting the phone, I went to android recovery mode instead of TWRP. What did I do wrong there? Please help!
buidoitieutu said:
I just tried to flash TWRP using Odin. After restarting the phone, I went to android recovery mode instead of TWRP. What did I do wrong there? Please help!
Click to expand...
Click to collapse
After flashing twrp dont let the device reboot. The stock recover overwrites twrp. In odin uncheck reboot then after the twrp install you have to boot to recovery Vol+ home and power..
buidoitieutu said:
I just tried to flash TWRP using Odin. After restarting the phone, I went to android recovery mode instead of TWRP. What did I do wrong there? Please help!
Click to expand...
Click to collapse
In Odin, visit Options tab, and uncheck Auto Reboot before Starting.
j21098 said:
Has anyone ever updated while they had an app like EZ Package Disabler installed with the apps disabled? I updated this morning and forgot to enable the apps before the update. It's working fine right now, just wondering if there would be a problem since the app says to enable apps before doing an update.
Click to expand...
Click to collapse
I freeze my apps using Titanium Backup, and I have never activated them before an update
Hi everyone, I installed this and issue arised, my system settings went to default rather than my customized settings.
But started to realize that my quick charge isn't working anymore (at least doesn't show a notification saying the fast charge is connected) and also no more vibrations for my touch light keys (back and switching apps buttons) when I touch them.
Pretty annoying, anyone has these issues and know how to fix these? Thanks
MDHACK said:
1. Update through OTA or flash Odin files.
2. Flash TWRP through Odin.
3. Flash latest Chainfire's SuperSu Systemless root on TWRP.
4. Enjoy!
Click to expand...
Click to collapse
I am using same firmware, but can't seems to root it using Systemless root on TWRP and Auto CF root... Any step by step guide on how you did it?
Anyone who has Android 6 on the N910T, could you please see if they have the language PORTUGUESE BRAZIL?
I cant get an 'adb shell' on the device. It says "error: device unauthorized. Please check the confirmation dialog on your device"
I am not by any means responsable for any damage caused to your devise during this procedure!
I want to mention that I was root before the OTA. But I restore the backup that I had and updated to 6.0, I don't know if this is somehow relevant.
Things you'll need:
[TOOL] Sahara & Firehose - link
TWRP image - link
SuperSU Flashable Zip - link
Some free time.
Step 1:
Download the TWRP and follow this guide: [HOWTO] IDOL 4 6055. Installing TWRP recovery & get root access.
It is important that you make the backup of your recovery partition!
Step 2:
Hold Vol+ and PWR until you see the TWRP logo.
Tell TWRP to not touch your system partition!
Now do a Backup of "System Image" and "Boot", you can also make a backup of "EFS" if you want
Step 3:
Connect your phone to the computer and transfer the SuperSU zip
Step 4:
Go to TWRP -> Advanced -> Terminal
And type the follow code:
Code:
echo "SYSTEMLESS=true" > /data/.supersu
Step 5:
Make sure the .supersu file is in /data.
TWRP -> Advanced -> File Manager -> /data
Step 6:
Install SuperSU
TWRP -> Install
Choose the zip you downloaded and transfer in the step 3.
Step 7:
Reboot and you are done!
Remember: If something went wrong while flashing SuperSU, you can always restore your backup booting into TWRP.
[RESERVED]
Cricket stock 6.0.1
Will this work on the cricket model on stock 6.0.1
please reply as soon as you can.
Perfecto!!!
I want to confirm that this method works perfectly, I apply it to my Idol 3 5,5" 6045i (with 6.0.1 via OTA) and works like a charm!! Thank you @josehdez01 and @DeckerSU for doing this possible!!
manowar24 said:
I want to confirm that this method works perfectly, I apply it to my Idol 3 5,5" 6045i (with 6.0.1 via OTA) and works like a charm!! Thank you @josehdez01 and @DeckerSU for doing this possible!!
Click to expand...
Click to collapse
Do you think it will work the with the 6045O model? and will it reset my phone, sorry for asking so many questions.
KingLuwi said:
Do you think it will work the with the 6045O model? and will it reset my phone, sorry for asking so many questions.
Click to expand...
Click to collapse
Good question brother, maybe @josehdez01 and @DeckerSU have the answer, I´m not sure, but it will work if the method is for all 6045X. Ask them
KingLuwi said:
Do you think it will work the with the 6045O model? and will it reset my phone, sorry for asking so many questions.
Click to expand...
Click to collapse
Hello, in theory this should work for all 6045. If you follow the steps of the guide in the point one you should have a backup of your recovery partition. This way if twrp does not boot for you you just flash back the backup and nothing happened.
In the very likely case of success you shouldn't lose any data.
Anyone else tried this?
Will that work on the Idol 3 (4.7)? Any confirmations are appreciated!
KingLuwi said:
Will this work on the cricket model on stock 6.0.1
please reply as soon as you can.
Click to expand...
Click to collapse
+1
-sigh- I'm just scared i'm going to brick my phone, I've never rooted before
Bump?
Should work with all variants. I used Sahara with a 6045Y multiple times and never had a problem. Your best bet is to make a backup, try it and if it bricks (very small chance) you can always restore with Mobile Upgrade Q
KingLuwi said:
Do you think it will work the with the 6045O model? and will it reset my phone, sorry for asking so many questions.
Click to expand...
Click to collapse
KingLuwi said:
Will this work on the cricket model on stock 6.0.1
please reply as soon as you can.
Click to expand...
Click to collapse
This method works perfectly on a cricket 6045 no issues at all
I tried to this but the sahara stops responding when i try to back up my recovery
---------- Post added at 12:18 AM ---------- Previous post was at 12:15 AM ----------
allenjthomsen said:
This method works perfectly on a cricket 6045 no issues at all
Click to expand...
Click to collapse
I tried to this but the sahara stops responding when i try to back up my recovery
KingLuwi said:
I tried to this but the sahara stops responding when i try to back up my recovery
---------- Post added at 12:18 AM ---------- Previous post was at 12:15 AM ----------
I tried to this but the sahara stops responding when i try to back up my recovery
Click to expand...
Click to collapse
Thats weird because it didnt do that to me at all i backed up my recovery and flashed twrp and rebooted to recovery just fine
Sent from my 6045O using XDA-Developers mobile app
allenjthomsen said:
Thats weird because it didnt do that to me at all i backed up my recovery and flashed twrp and rebooted to recovery just fine
Sent from my 6045O using XDA-Developers mobile app
Click to expand...
Click to collapse
Do you mind telling me how many mbs the recovery.img has
Mine came out to 26.8 idk if thats correct ill redo it to make sure back to stock eith no recovery to test and make sure lolz
Sent from my 6045O using XDA-Developers mobile app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So the stock recovery comes out to 32.7MBs for 6.0.1 on cricket Idol 3
Sent from my SM-G935T using XDA-Developers mobile app
allenjthomsen said:
So the stock recovery comes out to 32.7MBs for 6.0.1 on cricket Idol 3
Sent from my SM-G935T using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks for the info I really appreciate it!
So today with some testers i managed to make root on OnePlus 8, I want to specify that 95% of the work was done by @topjohnwu (Magisk creator).
I will explain 2 different guides:
First Root Guide:
This guide is for a specific rom version, so you will need to use a specific patched boot.img
- Download the patched_boot.img
- Reboot your device in bootloader-fastboot mode
- Flash the patched_boot.img in the boot partition:
Code:
fastboot flash boot boot.img
replace "boot.img" with the patched_boot.img path
- Reboot the device
- Install Magisk Manager
Second Root Guide:
This guide is more generic than the first one, you should use this one if you are unable to find a specific patched boot.img
- Download a patched_boot.img (you should try with the latest one)
- Reboot your device in bootloader-fastboot mode
- Boot the patched_boot.img:
Code:
fastboot boot boot.img
replace "boot.img" with the patched_boot.img path
- Reboot the device
- Install Magisk Manager
- Click on Install, then direct install and wait the end of the process
- Reboot the device
TIPS:
You can get the stock boot images from the fastboot rom: Fastboot ROMs
HOW TO UPDATE a ROM and KEEP ROOT:
Before all Disable all magisk modules
Be sure to use Canary Magisk Manager and Canary Magisk (debug)
You can update a stock rom from phone settings with local upgrade:
- Update the Rom WITHOUT REBOOT;
- Open Magisk Manager;
- In Magisk Manager, click on Install/Install/Direct Install;
- Again in Magisk Manager, click on Install/Install/Inactive Slot;
- Reboot.
Download:
Patched/Stock Boot Images:
https://androidfilehost.com/?w=files&flid=308379
or
https://sourceforge.net/projects/fastbootroms/files/OnePlus 8/Patched-Stock-Boot/
Reccomended ADB and Fastboot binaries:
Adb and Fastboot Installer
Donations:
Credits:
the link to the patched/stock images seems to be wrong
i found this link while going through ur files
https://androidfilehost.com/?w=files&flid=308379
hjjiang said:
the link to the patched/stock images seems to be wrong
i found this link while going through ur files
https://androidfilehost.com/?w=files&flid=308379
Click to expand...
Click to collapse
Yes thanks for the report, i linked the folder before the root folder. However updated the link in the first post
just wondering, is there a way to patch it urself?
It's with locked bootloader or unlocked bootloader ?
i reckon the only way to flash a boot image is to have an unlocked bootloader
Does it work with any OS version?
Is anybody able to upload a 10.5.3-EUROPE magisk patched (and stock) boot image?
If you're on this, DO NOT try with 10.5.2. It involves the SIMs not being usable and the system UI to regularly crash.
I followed this thinking I was on International 15.5.3 so flashed 10.5.3-GLOBAL-magisk_patched. I now cannot connect to WIFI and can't update via local system update as I'm on the latest EU version.
Any suggestions?
Used the unbrick tool to revert back to EU 10.5.1 back to complete stock and locked bootloader. WIFI working.
Ran the same sets again this time using the matching 10.5.1-EUROPE-magisk_patched file and still ran into the no WIFI issue :/
Deano1889 said:
I followed this thinking I was on International 15.5.3 so flashed 10.5.3-GLOBAL-magisk_patched. I now cannot connect to WIFI and can't update via local system update as I'm on the latest EU version.
Any suggestions?
Click to expand...
Click to collapse
flash the stock boot.img
Sent from my IN2015 using Tapatalk
so i updated to 10.5.4 b4 rooting, do i have to wait for a patched.img?
hjjiang said:
so i updated to 10.5.4 b4 rooting, do i have to wait for a patched.img?
Click to expand...
Click to collapse
https://drive.google.com/file/d/1-81aPg5T53vlSAwGJWiOPMaW_LZ4r6Bg/view?usp=drivesdk
for oneplus 8 global version
Sent from my IN2015 using Tapatalk
I lost the finger print.
now i can't set up the finger print, not sure if it is because of the root or something else.
anybody having same issue?
I'm running on oos 10.5.4 rooted
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my IN2015 using Tapatalk
Ibramj12 said:
flash the stock boot.img
Sent from my IN2015 using Tapatalk
Click to expand...
Click to collapse
I tried that too but still got no WIFI
Ibramj12 said:
https://drive.google.com/file/d/1-81aPg5T53vlSAwGJWiOPMaW_LZ4r6Bg/view?usp=drivesdk
for oneplus 8 global version
Sent from my IN2015 using Tapatalk
Click to expand...
Click to collapse
thanks ill try this
EDIT: seems to work on my global fone xD
Deano1889 said:
I tried that too but still got no WIFI
Click to expand...
Click to collapse
make sure you are using the correct version.
10.5.3.IN21AA
10.5.3.IN21BA
10.5.3.IN21DA
or you can directly download the latest update.
https://www.oneplus.com/support/softwareupgrade/details?code=PM1586920535300
rename it to "update.zip"
the go
settings >system update >local update
select the update.zip, reboot
re-root if required
Sent from my IN2015 using Tapatalk
---------- Post added at 09:00 PM ---------- Previous post was at 08:44 PM ----------
QUOTE=Ibramj12;82422497]Guys please help me.
I need the persist partition image
here is how you get it.
Code:
adb shell
su
dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img
exit
Sent from my IN2015 using Tapatalk
also FYI, their doesn't exist a magisk props for in2015, seems like in2013 is the only fingerprint for the time being
Ibramj12 said:
make sure you are using the correct version.
10.5.3.IN21AA
10.5.3.IN21BA
10.5.3.IN21DA
or you can directly download the latest update.
https://www.oneplus.com/support/softwareupgrade/details?code=PM1586920535300
rename it to "update.zip"
the go
settings >system update >local update
select the update.zip, reboot
re-root if required
Sent from my IN2015 using Tapatalk
---------- Post added at 09:00 PM ---------- Previous post was at 08:44 PM ----------
QUOTE=Ibramj12;82422497]Guys please help me.
I need the persist partition image
here is how you get it.
Code:
adb shell
su
dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img
exit
Sent from my IN2015 using Tapatalk
Click to expand...
Click to collapse
anyone can help me with partition image. the fingerprint isn't working
Sent from my IN2015 using Tapatalk
CTS profile is false for me, how can i fix this? i tried reflashing the boot image and magisk