Hey there,
I found a solution for the MTP-Driver issue under Windows 7 N Edition.
A few days ago I bought a new SSD Drive for my Desktop.
So i decided to install a fully new Windows on it, cause my windows 7 x64 was about 4 years in use now and doesnt worked reliable.
I decided to give Windows 7 N Version a try, cause it comes without some futures i thought i would not need.
ATM I use this KF First Aide with my KFHD 7
Installation of the ADB Driver worked without a problem, but i still got the yellow triangle on MTP Driver.
Tried then to install the driver manually using windows update. it didnt find a driver for MTP.
Tried to install the MTP device manualy selecting MTP Device in the "all devices" list (Standard MTP Device).
But this didnt work either.
After hours of searching i found a thread that led me to this :
As promised by Microsoft the N Version comes WITHOUT the Windows Media Player.
But as it seams the Windows Media Player contains the MTP Driver.
For god sake microsoft provides a pack to install it manually Media Feature Pack für Windows 7 N
This works of course only with original Windows as u have to pass a Genuine Verification to download it.
After installing the pack. The windows update found 2 other updates. i got them too and restarted my system. Now the triangle is gone. And my KFHD is recognised as Portable Device and everything works fine.
Dunno weather it will work with other Windows 7 Versions.
Metnies said:
Hey there,
I found a solution for the MTP-Driver issue under Windows 7 N Edition.
A few days ago I bought a new SSD Drive for my Desktop.
So i decided to install a fully new Windows on it, cause my windows 7 x64 was about 4 years in use now and doesnt worked reliable.
I decided to give Windows 7 N Version a try, cause it comes without some futures i thought i would not need.
ATM I use this KF First Aide with my KFHD 7
Installation of the ADB Driver worked without a problem, but i still got the yellow triangle on MTP Driver.
Tried then to install the driver manually using windows update. it didnt find a driver for MTP.
Tried to install the MTP device manualy selecting MTP Device in the "all devices" list (Standard MTP Device).
But this didnt work either.
After hours of searching i found a thread that led me to this :
As promised by Microsoft the N Version comes WITHOUT the Windows Media Player.
But as it seams the Windows Media Player contains the MTP Driver.
For god sake microsoft provides a pack to install it manually Media Feature Pack für Windows 7 N
This works of course only with original Windows as u have to pass a Genuine Verification to download it.
After installing the pack. The windows update found 2 other updates. i got them too and restarted my system. Now the triangle is gone. And my KFHD is recognised as Portable Device and everything works fine.
Dunno weather it will work with other Windows 7 Versions.
Click to expand...
Click to collapse
This is just ridiculous..
I have Windows 8.1 N Pro installed and can't use either, because it is missing the MTP driver. The fact that i have to install the Media Feature Pack to use a fundamental feature of my PC is just F***** UP! It is just Microsoft's way of giving the finger to the EU, and it makes the N-version completely useless.
But i refuse to install Windows Media Player and all that other crap just to use my Nexus 5 with my new laptop. If i have to write to the EU to try and make them force Microsoft to make the driver available as a standalone install, i will. This is just principally wrong of Microsoft, but really not surprising.
If people would just boycot Microsoft they might learn. But that will never happen, unfortunately..
All, does anyone have the Pipo W4? It's a lovely little Windows 8 tablet.
Unfortunately in removing the recovery partition my tab decided to stop booting.
The manufacturer's recovery image (and my own) doesn't seem to work.
I was wondering if anyone has this tablet, and if they can, if they can download a couple of drivers I'm unable to find anywhere else?
Thanks.
V
Hi, I have that tablet.
What exactly do you need?
http://softd.ir/2014/12/pipo-w4-drivers/
Success install win8.1 to PIPO W4
All about PIPO W4 tablet with windows 8.1
After 2 days I success install new windows 8.1 PRO
1. Bios have (V8L_WIN32_JS_PIPO_2014_10_17_20140927_DX.BIN) search in web
2. Windows load to USB via RUFUS (MBR)
3. Format emmc in BIOS
4. With usb OTG cable and HUB connect keyboard, mouse and USB with windows
5. Automatically start boot from USB (in my tab can´t select boot from anywhere)
6. Install windows
7. In device manager, manually update UNKNOWN device
8. Drivers for this tab is 100% functional from techtablets.com/pipo-w8/downloads
Its all, for any questions send email to me...
[email protected]
Good Luck!!!
As the title says I've installed Windows 10 TP on a Chuwi vi8. Easy enough to do, iso on to USB stick (fat32) with GPT part for uefi, then just hit escape on startup and go to boot menu, even added Wifi drivers to usb and loaded them during install which worked. Upon finishing I had to load a lot of drivers manually but managed to get a clear device manager. Had to manually install Intel HD drivers as it sees the MS drivers as newer, until you do this it's at a snails pace.
Anyway, the one problem I have is the touchscreen. It's recognising touches, just nowhere near where I'm actually touching it. Ran the calibration and having no luck. The current drivers are 'KMDF HID Minidriver for touch I2C Device' and these are the ones I found for W8.1 .
Anyone know of an alternative/fix or is this just a W10 TP problem? TIA
That's weird. I just went back to 8.1 but had been running 10 for weeks. I just installed the 8.1 driver, it complained initially (exclamation mark) but cleared after a reboot. No touch accuracy issues for me on 10074, 10122, and 10130. I think I got my 8.1 drivers from a link on techtablets.com.
BTW, the only issue I had was constant battery drain, even on standby. Are you experiencing that?
I also have the dual boot VI8 and wiped all partitions before installing 10, if that matters.
Edit: I've pretty sure these were the drivers I used: http://techtablets.com/download/Chu...ivers/Chuwi Vi8 Win8.1 drivers April 2015.zip
Hi my2sense, cheers for the reply. I used the same drivers, mine's the single OS no hdmi version. I found another set on a Chinese web site last night, I'll try them out today. After a lot of searching it seems some people are having the same issue after reinstalling 8.1. So maybe the drivers have been updated and are to blame. I may try pulling the old drivers out of the recovery drive I made, see if that helps.
As for the battery, yeah it's on constant drain when in use. Before I installed the drivers it seems to have charged as I was on 40% when I started in 8.1 and 75% when I finished in 10. The brightness levels also seem off in 10, just nowhere near bright enough. I'll probably head back to 8.1 after I have it working and wait for an official version. It's a shame as windows 10 has a much smaller footprint than wimboot 8.1 + recovery drive and seems like a nice OS.
Try regoing to 8.1 and hard reset for best results
Sent from my SM-G7102 using XDA Free mobile app
zorlac said:
As the title says I've installed Windows 10 TP on a Chuwi vi8. Easy enough to do, iso on to USB stick (fat32) with GPT part for uefi, then just hit escape on startup and go to boot menu, even added Wifi drivers to usb and loaded them during install which worked. Upon finishing I had to load a lot of drivers manually but managed to get a clear device manager. Had to manually install Intel HD drivers as it sees the MS drivers as newer, until you do this it's at a snails pace.
Anyway, the one problem I have is the touchscreen. It's recognising touches, just nowhere near where I'm actually touching it. Ran the calibration and having no luck. The current drivers are 'KMDF HID Minidriver for touch I2C Device' and these are the ones I found for W8.1 .
Anyone know of an alternative/fix or is this just a W10 TP problem? TIA
Click to expand...
Click to collapse
me too (win10 10240)
any solution ?
Hey,
I've ran into the same problem. I'm waiting for the tablet to reset but its taking ages.
Either way, I'm going trying the following;
(Just google "Chuwi Vi8 Windows 8.1 Reinstall Touchscreen Calibration Problem: Resolved" first link)
I'm not allowed post urls yet with my low post count
Seems like it might be worth a shot at least. I'm assuming the drivers work with Windows 10 however.
Jim
Just to note that following the instructions exactly as indicated in the post referred to in my post above leads to a correctly functioning touchscreen on the VI8 in Windows 10
i had the exact same problem with my vi10, just download the win 8.1 touchscreen drivers from somewhere and restart your tablet
Open device manager - human interface device - right click KMDF HID Minidriver for Touch I2C Device then choose Uninstall (tick delete the driver from þos device). Download this driver ht tps:// drive .google .com /file/d/0B8WYoM0IL-EHX1lMV2FZcUdibkE/view?usp=sharing
On device manager right click and scan new hardware. You can see new hardware found. Use the new driver.. now restart the device.. hope this can help
zorlac said:
As the title says I've installed Windows 10 TP on a Chuwi vi8. Easy enough to do, iso on to USB stick (fat32) with GPT part for uefi, then just hit escape on startup and go to boot menu, even added Wifi drivers to usb and loaded them during install which worked. Upon finishing I had to load a lot of drivers manually but managed to get a clear device manager. Had to manually install Intel HD drivers as it sees the MS drivers as newer, until you do this it's at a snails pace.
Anyway, the one problem I have is the touchscreen. It's recognising touches, just nowhere near where I'm actually touching it. Ran the calibration and having no luck. The current drivers are 'KMDF HID Minidriver for touch I2C Device' and these are the ones I found for W8.1 .
Anyone know of an alternative/fix or is this just a W10 TP problem? TIA
Click to expand...
Click to collapse
you havent got problem with calibration it is problem with firmware
but here is driver for you
http://www.mediafire.com/download/j...6_Drivers_Update_Sorted_By_Junnie_V150806.rar
My problem was the same after installed Windows 10 on chuwi vi8 (single boot version), the touch was comepletely inverted: when i touched left bottom corner the touch showed at the top right corner and so on. I remembered that on Android when i ported roms from different devices i had the same problem.
How to fix it?
1. remove the touch driver (KMDF HID Minidriver for touch I2C Device).
2. The screen rotation is disabled by default on Windows 10, you need to enable it. After that you did that, rotate the tablet upside down: with the tablet's Windows logo at the top of the screen (IMPORTANT!).
3. install the KMDF HID Minidriver for touch I2C Device driver again. The driver will take the initial directions now, so be sure that you dont rotate the screen during this step.
4. reboot, and its fixed!
Hope it helps....
Just Thanks!!
tehanget said:
Open device manager - human interface device - right click KMDF HID Minidriver for Touch I2C Device then choose Uninstall (tick delete the driver from þos device). Download this driver ht tps:// drive .google .com /file/d/0B8WYoM0IL-EHX1lMV2FZcUdibkE/view?usp=sharing
On device manager right click and scan new hardware. You can see new hardware found. Use the new driver.. now restart the device.. hope this can help
Click to expand...
Click to collapse
Thanks for sharing this post :good::good:,
I followed your simple instructions and finally, this really worked for me after a lot of time having issues with the touch screen.
Hope this works for most people too.
Best regards.
tehanget said:
Open device manager - human interface device - right click KMDF HID Minidriver for Touch I2C Device then choose Uninstall (tick delete the driver from þos device). Download this driver ht tps:// drive .google .com /file/d/0B8WYoM0IL-EHX1lMV2FZcUdibkE/view?usp=sharing
On device manager right click and scan new hardware. You can see new hardware found. Use the new driver.. now restart the device.. hope this can help
Click to expand...
Click to collapse
I followed your instructions, the device is recognizated but the touch present multi points on the screen and the miviments is inverted.
I have the same problem.
I had it windows 10 out of the box, however I had to reset it to defaults recently. Upon booting up I'm on the page where you choose your time zone/keyboard layout/language/country..etc, there is a next button on it too. Its part of the windows steps before it actually boots into Windows for the first time, unfortunately the touch screen isn't working on at all on this page. So im unable to even get to device manager or reload touchscreen drivers.
So for me, What are my options?
Could I use a micro USB to USB converter and plug a mouse in the tablet???. Im not sure if the mouse would get recognized or not though... I cannot think of any other way to solve this??.
hi everyone, i just upgrade my pc from 8.1 to windows 10.but after successfull installation there is no sound in pc..it shows that no audio device found.i attached screenshort below...
and i also clean install windows 7...but the problem still remained....i also install driver but not work.....need n help
Have you tried updating your driver's?
Sent from my BN Nook HD using Tapatalk
A AJAY said:
hi everyone, i just upgrade my pc from 8.1 to windows 10.but after successfull installation there is no sound in pc..it shows that no audio device found.i attached screenshort below...
and i also clean install windows 7...but the problem still remained....i also install driver but not work.....need n help
Click to expand...
Click to collapse
Install proper sound drivers
Sent from my Micromax A092 using Tapatalk
no driver worked......i try clean install of windows 7 and use my driver cd but,,there is no sound
So you formatted again and did another install of Windows 7, and it still doesn't show up? Is it onboard audio? Check the BIOS to ensure it's enabled.
Google brings up a lot of results, have you tried looking at them? What does Device Manager show?
If it still doesn't work, the sound card/motherboard if onboard might be dead.
I can't count on two hands how many people, including myself had this upgrade problem. Always audio or video.
Firstly, I'd check to see on the notebook/pc manufacturer website if they have Windows 10 drivers for your model. That's the best place to start.
Some older drivers are getting automatically updated through Windows Update. It seems Microsoft has encouraged some key driver updates. E.g. Intel integrated graphics.
Lastly, uninstall the driver, reboot your computer, now, install the driver again under compatibility mode for the version of Windows you have.
For audio, compatibility mode worked. Get this. My notebook came with Windows 7. The Windows 7 driver works (after about 20 attempts) but the Windows 8 driver doesn't. My understanding is that Windows 8 drivers are a bit more compatible with 10 than 7. But the 7 driver actually worked better.
Let us know how you get on.
Hello There !
I'm using a Windows 10 Pro N version 1909 and I'm having a lot of problems with andoid devices since I'm not able to use any of them connected to my laptop. For a Nokia 8 there is an issue with MTP drivers, Xiaomi 8 pro is seen as a device but still issues with drivers, with a nexus 4 on which I installed noughat it doesn't show up at all(which is pretty wierd since I used the same laptop to root it and install the new version of android). Any suggestion to fix the issue?
I need to use them for my app development on android studio, any help would be really helpful.
Thanks for your help
rewat1984 said:
Hello There !
I'm using a Windows 10 Pro N version 1909 and I'm having a lot of problems with andoid devices since I'm not able to use any of them connected to my laptop. For a Nokia 8 there is an issue with MTP drivers, Xiaomi 8 pro is seen as a device but still issues with drivers, with a nexus 4 on which I installed noughat it doesn't show up at all(which is pretty wierd since I used the same laptop to root it and install the new version of android). Any suggestion to fix the issue?
I need to use them for my app development on android studio, any help would be really helpful.
Thanks for your help
Click to expand...
Click to collapse
Go to device manager and if it shows as anything other than your phone, right click and "uninstall device".........then reboot pc and plug phone back in. Usually works if you have already made sure you have the correct drivers installed.
The fix is really simple: just download and install the media feature pack. IT contains all codec and the most important, the MTP driver. You won't find it separately except in this pack.