Greetings, friends.
I bought my first smartwatch from an eBay seller. These are the specs specified in the description:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The description states that the watch has Hebrew as selectable language but the watch that I received only has: English, Russian, Spanish, Polish, Portuguese, Turkish, Italian, French, German and Dutch.
I have two questions that I hope someone can answer:
1. What are the specs of the watch that I received and do they match the seller's specs?
2. Are there ROMs for this watch that do have Hebrew as a selectable language?
Info about the product I received:
I used a scatter file for GT08 I found online for flashtool, it is attached to this message (GT08 scatter.rar).
Flashtool RAM Test:
Code:
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x0000D000 (52KB)
External RAM:
Type = SRAM
Size = 0x00400000 (4MB/32Mb)
NOR Flash:
Device ID = "[GigaDevice] GD25LQ32" (236)
Size = 0x00400000 (4MB/32Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21]
OK!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!
Increment/Decrement Test :
Writing ...
OK!
============ NOR Test ============
Address Bus Test(High Address Pins):
OK!
Pattern Test(0x5A5A):
(0x00001000),(0x00002000),(0x00003000),(0x00004000),(0x00005000),(0x00006000),(0x00007000),(0x00008000),(0x00009000),(0x0000A000),(0x0000B000),(0x0000C000),(0x0000D000),(0x0000E000),(0x0000F000),(0x00010000),(0x00011000),(0x00012000),(0x00013000),(0x00014000),(0x00015000),(0x00016000),(0x00017000),(0x00018000),(0x00019000),(0x0001A000),(0x0001B000),(0x0001C000),(0x0001D000),(0x0001E000),(0x0001F000),(0x00020000),(0x00021000),(0x00022000),(0x00023000),(0x00024000),(0x00025000),(0x00026000),(0x00027000),(0x00028000),(0x00029000),(0x0002A000),(0x0002B000),(0x0002C000),(0x0002D000),(0x0002E000),(0x0002F000),(0x00030000),(0x00031000),(0x00032000),(0x00033000),(0x00034000),(0x00035000),(0x00036000),(0x00037000),(0x00038000),(0x00039000),(0x0003A000),(0x0003B000),(0x0003C000),(0x0003D000),(0x0003E000),(0x0003F000),(0x00040000),(0x00041000),(0x00042000),(0x00043000),(0x00044000),(0x00045000),(0x00046000),(0x00047000),(0x00048000),(0x00049000),(0x0004A000),(0x0004B000),(0x0004C000),(0x0004D000),(0x0004E000),(0x0004F000),(0x00050000),(0x00051000),(0x00052000),(0x00053000),(0x00054000),(0x00055000),(0x00056000),(0x00057000),(0x00058000),(0x00059000),(0x0005A000),(0x0005B000),(0x0005C000),(0x0005D000),(0x0005E000),(0x0005F000),(0x00060000),(0x00061000),(0x00062000),(0x00063000),(0x00064000),(0x00065000),(0x00066000),(0x00067000),(0x00068000),(0x00069000),(0x0006A000),(0x0006B000),(0x0006C000),(0x0006D000),(0x0006E000),(0x0006F000),(0x00070000),(0x00071000),(0x00072000),(0x00073000),(0x00074000),(0x00075000),(0x00076000),(0x00077000),(0x00078000),(0x00079000),(0x0007A000),(0x0007B000),(0x0007C000),(0x0007D000),(0x0007E000),(0x0007F000),(0x00080000),(0x00081000),(0x00082000),(0x00083000),(0x00084000),(0x00085000),(0x00086000),(0x00087000),(0x00088000),(0x00089000),(0x0008A000),(0x0008B000),(0x0008C000),(0x0008D000),(0x0008E000),(0x0008F000),(0x00090000),(0x00091000),(0x00092000),(0x00093000),(0x00094000),(0x00095000),(0x00096000),(0x00097000),(0x00098000),(0x00099000),(0x0009A000),(0x0009B000),(0x0009C000),(0x0009D000),(0x0009E000),(0x0009F000),(0x000A0000),(0x000A1000),(0x000A2000),(0x000A3000),(0x000A4000),(0x000A5000),(0x000A6000),(0x000A7000),(0x000A8000),(0x000A9000),(0x000AA000),(0x000AB000),(0x000AC000),(0x000AD000),(0x000AE000),(0x000AF000),(0x000B0000),(0x000B1000),(0x000B2000),(0x000B3000),(0x000B4000),(0x000B5000),(0x000B6000),(0x000B7000),(0x000B8000),(0x000B9000),(0x000BA000),(0x000BB000),(0x000BC000),(0x000BD000),(0x000BE000),(0x000BF000),(0x000C0000),(0x000C1000),(0x000C2000),(0x000C3000),(0x000C4000),(0x000C5000),(0x000C6000),(0x000C7000),(0x000C8000),(0x000C9000),(0x000CA000),(0x000CB000),(0x000CC000),(0x000CD000),(0x000CE000),(0x000CF000),(0x000D0000),(0x000D1000),(0x000D2000),(0x000D3000),(0x000D4000),(0x000D5000),(0x000D6000),(0x000D7000),(0x000D8000),(0x000D9000),(0x000DA000),(0x000DB000),(0x000DC000),(0x000DD000),(0x000DE000),(0x000DF000),(0x000E0000),(0x000E1000),(0x000E2000),(0x000E3000),(0x000E4000),(0x000E5000),(0x000E6000),(0x000E7000),(0x000E8000),(0x000E9000),(0x000EA000),(0x000EB000),(0x000EC000),(0x000ED000),(0x000EE000),(0x000EF000),(0x000F0000),(0x000F1000),(0x000F2000),(0x000F3000),(0x000F4000),(0x000F5000),(0x000F6000),(0x000F7000),(0x000F8000),(0x000F9000),(0x000FA000),(0x000FB000),(0x000FC000),(0x000FD000),(0x000FE000),(0x000FF000),(0x00100000),(0x00101000),(0x00102000),(0x00103000),(0x00104000),(0x00105000),(0x00106000),(0x00107000),(0x00108000),(0x00109000),(0x0010A000),(0x0010B000),(0x0010C000),(0x0010D000),(0x0010E000),(0x0010F000),(0x00110000),(0x00111000),(0x00112000),(0x00113000),(0x00114000),(0x00115000),(0x00116000),(0x00117000),(0x00118000),(0x00119000),(0x0011A000),(0x0011B000),(0x0011C000),(0x0011D000),(0x0011E000),(0x0011F000),(0x00120000),(0x00121000),(0x00122000),(0x00123000),(0x00124000),(0x00125000),(0x00126000),(0x00127000),(0x00128000),(0x00129000),(0x0012A000),(0x0012B000),(0x0012C000),(0x0012D000),(0x0012E000),(0x0012F000),(0x00130000),(0x00131000),(0x00132000),(0x00133000),(0x00134000),(0x00135000),(0x00136000),(0x00137000),(0x00138000),(0x00139000),(0x0013A000),(0x0013B000),(0x0013C000),(0x0013D000),(0x0013E000),(0x0013F000),(0x00140000),(0x00141000),(0x00142000),(0x00143000),(0x00144000),(0x00145000),(0x00146000),(0x00147000),(0x00148000),(0x00149000),(0x0014A000),(0x0014B000),(0x0014C000),(0x0014D000),(0x0014E000),(0x0014F000),(0x00150000),(0x00151000),(0x00152000),(0x00153000),(0x00154000),(0x00155000),(0x00156000),(0x00157000),(0x00158000),(0x00159000),(0x0015A000),(0x0015B000),(0x0015C000),(0x0015D000),(0x0015E000),(0x0015F000),(0x00160000),(0x00161000),(0x00162000),(0x00163000),(0x00164000),(0x00165000),(0x00166000),(0x00167000),(0x00168000),(0x00169000),(0x0016A000),(0x0016B000),(0x0016C000),(0x0016D000),(0x0016E000),(0x0016F000),(0x00170000),(0x00171000),(0x00172000),(0x00173000),(0x00174000),(0x00175000),(0x00176000),(0x00177000),(0x00178000),(0x00179000),(0x0017A000),
Pictures from the phone app when typing *#8375# :
Flashtool readback rom (4MiB):
(In attachment, ROM_0.rar)
MTK Resource Edit V1.3 info:
MTK_ROMINFO_v09 MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_RUANAN_GT08S_LCD7789_9304_CAM3A01_LANGB_V1_6.BIN
Any help will be appreciated!
OK, bad news: The watch died.
Funny thing is, I didn't do anything to it, it just died on it's own. I haven't flashed any firmware at all.
The watch will not turn on and will not charge the battery. Battery measures 3.3V and does not get charged by an external charger. Trying to turn the watch on by connecting an external (good) battery also fails.
Next I will try to flash a new firmware, probably this one:
https://drive.google.com/file/d/0B_hRh3DjuBoeRHNGNUFlVFF0eVE/view?pref=2&pli=1
If anyone is keeping track, I flashed my watch with this ROM:
https://drive.google.com/file/d/0B_hRh3DjuBoeRHNGNUFlVFF0eVE/view?pref=2&pli=1
And it got back to life. I believe this firmware is exactly like the one that my watch had originally (has the same rominfo code).
After the watch worked again, I decided to risk it and try flashing new ROMs. I ended up flashing nearly all the 32Mbit firmwares from Golem's collection. The results can be categorized into five groups (by ROMINFO code):
1. LCD Worked correctly:
ROMINFO:
a. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_RUANAN_GT08S_LCD7789_9304_CAM3A01_LANGB_V1_6
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_GRD_GT08S_LCD7789_9304_CAM3A01_LANGA_V1_0
2. Touchscreen matrix was rotated 180° (i.e. to press what's displayed in the bottom-left, you touch your finger to the top-right):
ROMINFO:
a. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.JIAQI_61D_YIDITONG_CAM3A01_LCD7789_LANGA_V1_1
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_JMX_CAM3A01_LCD7789_9304_LANGA_V1_0
3. Touchscreen does not work (pressing what is displayed doesn't work):
ROMINFO:
a. [all firmwares starting with:] GPLUS61A_11C_NX9_PCB01_GPRS_MT6261_S00.NX9_61D_240
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.HD_GV18_SW_V1_B
4. Display was all white:
Only one firmware: SH27_PCB01_GPRS_MT6261_S00.MAUI_11C_W13_52_MP_V5
5. Watch would not turn on:
Only one firmware: MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.MAUI_11C_W13_52_MP_V2_F1
None of the firmwares with the working LCD (even those with 180° flipped lcd) had Hebrew. Some of them did have more languages like Arabic, Hindi, Farsi etc but that doesn't help me
So eventually I flashed my original ROM which I backed up beforehand. This brought back my IMEI, which I thought I had lost.
C4lculated said:
If anyone is keeping track, I flashed my watch with this ROM:
https://drive.google.com/file/d/0B_hRh3DjuBoeRHNGNUFlVFF0eVE/view?pref=2&pli=1
And it got back to life. I believe this firmware is exactly like the one that my watch had originally (has the same rominfo code).
After the watch worked again, I decided to risk it and try flashing new ROMs. I ended up flashing nearly all the 32Mbit firmwares from Golem's collection. The results can be categorized into five groups (by ROMINFO code):
1. LCD Worked correctly:
ROMINFO:
a. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_RUANAN_GT08S_LCD7789_9304_CAM3A01_LANGB_V1_6
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_GRD_GT08S_LCD7789_9304_CAM3A01_LANGA_V1_0
2. Touchscreen matrix was rotated 180° (i.e. to press what's displayed in the bottom-left, you touch your finger to the top-right):
ROMINFO:
a. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.JIAQI_61D_YIDITONG_CAM3A01_LCD7789_LANGA_V1_1
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.LD991_JMX_CAM3A01_LCD7789_9304_LANGA_V1_0
3. Touchscreen does not work (pressing what is displayed doesn't work):
ROMINFO:
a. [all firmwares starting with:] GPLUS61A_11C_NX9_PCB01_GPRS_MT6261_S00.NX9_61D_240
b. MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.HD_GV18_SW_V1_B
4. Display was all white:
Only one firmware: SH27_PCB01_GPRS_MT6261_S00.MAUI_11C_W13_52_MP_V5
5. Watch would not turn on:
Only one firmware: MTK61D_BTDIALER_11C_PCB01_GPRS_MT6261_S00.MAUI_11C_W13_52_MP_V2_F1
None of the firmwares with the working LCD (even those with 180° flipped lcd) had Hebrew. Some of them did have more languages like Arabic, Hindi, Farsi etc but that doesn't help me
So eventually I flashed my original ROM which I backed up beforehand. This brought back my IMEI, which I thought I had lost.
Click to expand...
Click to collapse
hi bro
so you did not find any thing to do with your watch.
i have similar watch.
we cant do any nice modification for our watches?
did you try to install new watch faces?
No, AFAIK the 32Mb models are not modifiable in any way.
In the specifications i read 64+128. 64 mb Rom + 128 Ram???
Enviado desde mi LG-D855 mediante Tapatalk
Hi..i have exactly the same watch with the same firmware..how can i restore back my rom dump?? i cant do it :crying: can u help me? if you may share your backup folder would be gratefull....
thanks in advance...
hello
i got the gt08 with no Hebrew , can i add hebrew?
Plz help me see this https://forum.xda-developers.com/general/xda-assist/bricked-gt08-t3537318
If you want to add your own language... refer to this thread from mine https://forum.xda-developers.com/showpost.php?p=72063702&postcount=2128
Newbie with GT08 MTK61D wanting help
Hi,
Sorry if this or similar has already been posted.
I have just bought a GT08 from wish.com. When it arrived and fully charged, it all worked fine for a few hours.
Then it decided not to accept and retain the time change, it would just go back to default immediately no matter what I tried.
I therefore thought I might try to flash the firmware, but found that this seemed to be very confusing.
From my watch screen I gleaned this info:
GT08 IMEI: 358521458986545
LD991B_V7.0_COB_A_TQHD_GT08_JXD7789_9304_LX9305_A_V8.6
[BRANCH]: 11CW1352MP
MTK61D_BTDIALER_11C
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2017/09/23 12:34
[MRE VERSION] - 266941256
HAL_VERNO:
I determined that my firmware was MTK61D, but I cannot seem to find the correct firmware, also any firmware I chose to run (DZ09 etc) through Mediatek FlashTool_v5.1516.00.00 came up with an error that I cannot correct: "Your BROM DLL version and DA version is not matched! Please check the DA path!"
I tried: SP_Flash_Tool_v5.1744_Win which would not accept any downloaded firmwares as they did not have a ".TXT" file only ".CFG".
So now after two days of searching I am still in the same place as I started with a watch that will not keep changed time.
Any help?????
Cuandur said:
Hi,
Sorry if this or similar has already been posted.
I have just bought a GT08 from wish.com. When it arrived and fully charged, it all worked fine for a few hours.
Then it decided not to accept and retain the time change, it would just go back to default immediately no matter what I tried.
I therefore thought I might try to flash the firmware, but found that this seemed to be very confusing.
From my watch screen I gleaned this info:
GT08 IMEI: 358521458986545
LD991B_V7.0_COB_A_TQHD_GT08_JXD7789_9304_LX9305_A_V8.6
[BRANCH]: 11CW1352MP
MTK61D_BTDIALER_11C
BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2017/09/23 12:34
[MRE VERSION] - 266941256
HAL_VERNO:
I determined that my firmware was MTK61D, but I cannot seem to find the correct firmware, also any firmware I chose to run (DZ09 etc) through Mediatek FlashTool_v5.1516.00.00 came up with an error that I cannot correct: "Your BROM DLL version and DA version is not matched! Please check the DA path!"
I tried: SP_Flash_Tool_v5.1744_Win which would not accept any downloaded firmwares as they did not have a ".TXT" file only ".CFG".
So now after two days of searching I am still in the same place as I started with a watch that will not keep changed time.
Any help?????
Click to expand...
Click to collapse
try this flashtool version :
https://drive.google.com/open?id=1xd3HyHitBzW0x1fufchU5aFkAoY9slV4
DZ09 Firmware:
https://drive.google.com/open?id=1xJdeyZIe3n0k85e5FjZm9-0bGUrXNVRW
---------- Post added at 08:25 AM ---------- Previous post was at 08:04 AM ----------
naorway said:
hello
i got the gt08 with no Hebrew , can i add hebrew?
Click to expand...
Click to collapse
GT08 with HEBREW Language added:
https://drive.google.com/open?id=1NNAAHE1jVyPfuS04ZG-8NHs5bfCUYryv
Negative colours and no touch response
oxatools said:
try this flashtool version :
*****
DZ09 Firmware:
*****
---------- Post added at 08:25 AM ---------- Previous post was at 08:04 AM ----------
GT08 with HEBREW Language added:
*****
Click to expand...
Click to collapse
Thank-you for your response, I have tried your suggestions which worked with some response, unfortunately now my watch screen seems to be showing everything in colour negative and no response to touch, all I can do is remove the battery to turn it off.
Any advice?
---------- Post added at 01:28 PM ---------- Previous post was at 01:27 PM ----------
[/COLOR]
Cuandur said:
Thank-you for your response, I have tried your suggestions which worked with some response, unfortunately now my watch screen seems to be showing everything in colour negative and no response to touch, all I can do is remove the battery to turn it off.
Any advice?
Click to expand...
Click to collapse
Can you Upload your Fullflash or Flash Files Backup
i will check version
Backup
oxatools said:
Can you upload yor backup?
I will check version
Thanks
---------- Post added at 01:28 PM ---------- Previous post was at 01:27 PM ----------
Can you Upload your Fullflash or Flash Files Backup
i will check version
Click to expand...
Click to collapse
Ummmm, Noob response...Backup?
I followed the instructions that I could read (ie not Chinese) and it made no mention of Backup that I am aware, so I assume there is no backup (sorry)
I read and followed "Download operation steps.doc" but all the other docs etc are in Chinese, I didn't see which other doc I could use to start the process.
Cuandur said:
Ummmm, Noob response...Backup?
I followed the instructions that I could read (ie not Chinese) and it made no mention of Backup that I am aware, so I assume there is no backup (sorry)
I read and followed "Download operation steps.doc" but all the other docs etc are in Chinese, I didn't see which other doc I could use to start the process.
Click to expand...
Click to collapse
Thats bad!!!!
Never ever flash your watch or phone if you do not have a backup of original firmware.
There is no way to get it back!!!!!
Try to Download a nother Version, reflash it and hope its working!!!!
Update
oxatools said:
Thats bad!!!!
Never ever flash your watch or phone if you do not have a backup of original firmware.
There is no way to get it back!!!!!
Try to Download a nother Version, reflash it and hope its working!!!!
Click to expand...
Click to collapse
For anybody who's interested I managed to get my watch running again (sort of).
I tried a few ROM's but got varying results from inverted colours with no touch response, normal colours no touch but I finally got one to work, it has inverted colours but has touch response.
FYI: https://www.needrom.com/download/rom-gt08-mtk6261d/ is the one working now.
But I am back to original problem, the clock refuses to accept new time given and stays on default time (including time taken since start) and have just discovered it now says "Invalid SIM".
?
Cuandur said:
For anybody who's interested I managed to get my watch running again (sort of).
I tried a few ROM's but got varying results from inverted colours with no touch response, normal colours no touch but I finally got one to work, it has inverted colours but has touch response.
FYI: https://www.needrom.com/download/rom-gt08-mtk6261d/ is the one working now.
But I am back to original problem, the clock refuses to accept new time given and stays on default time (including time taken since start) and have just discovered it now says "Invalid SIM".
?
Click to expand...
Click to collapse
have you tried thes GT08 Firmwares?
https://forum.xda-developers.com/smartwatch/other-smartwatches/rom-gt08-mtk6261a-t3390504
Hello everyone,
I have just got this Samsung S7 Edge clone with a custom ROM installed (I guess it's custom)
It was working fine but I noticed that I can't install Apps because the storage is full
So I thought it's because of the ROM , the system files are taking all the space , so I decided to look for another ROM
First , let me give the phone details when I first got it:
PHP:
GENERAL:
-Brand:Samsung
-Model:SM-G9350
-Device Type:hero2qltechn/htc6580_weg_a_l
-Product name: hero2qltezc
FIRMWARE:
-Baseband version: MOLY.WR8.W1449.MD.WG.MP.V23.P8 2016/07/25
-Kernel version: 3.10.0-2828982 [email protected] #1 32-bit
-Java virtual machine: ART 2.1.0
ANDROID:
-root: yes
-android version: 6.0.1
-build number: MMB29M.G9350ZCU2APD1
-build fingerprint: samsung/hero2ltexx/hero2lte:6.0.1/MMB29K/G935FXXU1APAVA:user/release-keys
HARDWARE:
-hardware/board: mt6580 32bits
-ship: mt6580
-GPU: ARM Mali-400 MP
So I looked on google and found the following:
ROM1: The one which was installed in the phone : https://docs.google.com/uc?id=0B-EUqlLQUL2PS3F3WFoyVjVoUE0&export=download
ROM2: Didn't work with at first , but worked after unchecking "preloader" in SP Flash tool : http://www.needrom.com/download/hdc-s7-mmb29m/
ROM3: the bad one that messed with the touch screen I guess: http://www.gsmchinamobile.com/2016/08/samsung-galaxy-s7-edge-g935f-mt6580.html
So let me tell you what happened exactly
I used "SP_Flash_Tool_v5.1628" to install the ROMs
I installed the ROM1 and I found that it the same as the one I had (the touch screen was working fine) , so I decided to install ROM2 , after installing it , the phone didn't want to turn on
So I decided to install ROM1 again , and it worked fine (the touch screen was working fine)
so I tried to install ROM3 but I unchecked "preloader" in SP Flash Tool , the phone turned on but it was given me a Gray screen and I could hear the sound of turning on but without seeing a thing
so I decided again to Install ROM2 with unchecking "prealoader" in SP Flash tool, so I did that , and this time ROM2 worked and turned on , but I couldn't use the Touch screen anymore (only Home screen working)
So I decided to go back to the old rom (ROM1) that was working before , but this time I couldn't use the Touch screen anymore
I thought I broke the Screen somehow , so I asked a Tech guy here to verify it and he said the screen is fine and it's something with the software not hardware
I really don't know what to do or why ROM1 is not working anymore
I hope someone can help me here
Regards,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have run a Memory Test using "SP_Flash_Tool_v5.1648":
RAM Test
Data Bus Test
Addr Bus Test
Dedicated Pattern Test
Inc/Dec Pattern Test
and those are the results:
PHP:
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000100000(1MB)
EMMC_PART_BOOT2 Size = 0x0000000000100000(1MB)
EMMC_PART_RPMB Size = 0x0000000000100000(1MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000e9800000(3736MB)
UFS:
ERROR: UFS was not detected!
============ RAM Test ============
Data Bus Test:
[D0]
[D1]
[D2]
[D3]
[D4]
[D5]
[D6]
[D7]
[D8]
[D9]
[D10]
[D11]
[D12]
[D13]
[D14]
[D15]
[D16]
[D17]
[D18]
[D19]
[D20]
[D21]
[D22]
[D23]
[D24]
[D25]
[D26]
[D27]
[D28]
[D29]
[D30]
[D31]
OK!!
Address Bus Test:
[A1]
[A2]
[A3]
[A4]
[A5]
[A6]
[A7]
[A8]
[A9]
[A10]
[A11]
[A12]
[A13]
[A14]
[A15]
[A16]
[A17]
[A18]
[A19]
[A20]
[A21]
[A22]
[A23]
[A24]
[A25]
[A26]
[A27]
[A28]
[A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!
Increment/Decrement Test:
Writing...
OK!!
Try anyone of this
https://www.sammobile.com/firmwares/database/SM-G9350/
They are original roms for that mothel, they should work...
alehawk said:
Try anyone of this
https://www.sammobile.com/firmwares/database/SM-G9350/
They are original roms for that mothel, they should work...
Click to expand...
Click to collapse
thanks for your reply , but this is a mt6580 ship , I doubt Odin will work in this case.
Also as I have said before ROM 1 was working fine , I flashed with it multiple time , I just don't know why in the last time the touch screen is not working anymore , as you can see in the picture the ROM 1 is installed successfully. Again are you sure Odin will work for my cloned phone (MT6580 ship) ?
Can it be the Digitizer ? I mean can flashing the phone many times broke the Digitizer or the digitizer happen to broke when I was flashing the ROMs?
unesever said:
Can it be the Digitizer ? I mean can flashing the phone many times broke the Digitizer or the digitizer happen to broke when I was flashing the ROMs?
Click to expand...
Click to collapse
How do you imagine that? Flashing new software doesn't influence on hardware at all, especially screen component.
Sent from my SM-G935F using Tapatalk
Am I missing something here, he said it's a 'clone'
If it's a clone, then you're on the wrong forum. Even though the phones look similar, the hw and sw are miles apart from G935x.
Good luck
And its why he's got no memory, they state 32GB internal but usually only have 4 or 8GB plus 512MB ram with Android 4.2.2
man.. u cant install amd driver on nvidia.. ur will be lucky if ur phone still working
mali400 ? this phone has mali880
dollar7 said:
How do you imagine that? Flashing new software doesn't influence on hardware at all, especially screen component.
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
I know that but people keep telling me the opposite , also it's weird that this happened when I was flashing the phone as I've said before , so I really don't know what happened exactly
Shipoftheline said:
Am I missing something here, he said it's a 'clone'
Click to expand...
Click to collapse
yes it's a clone
Bjaped said:
If it's a clone, then you're on the wrong forum. Even though the phones look similar, the hw and sw are miles apart from G935x.
Good luck
Click to expand...
Click to collapse
do you mean the wrong section? because I have seen some threads related to clone phones in xda-developers forum. If this is the wrong section , I hope some of the mods can move the thread to the right section
Shipoftheline said:
And its why he's got no memory, they state 32GB internal but usually only have 4 or 8GB plus 512MB ram with Android 4.2.2
Click to expand...
Click to collapse
It has 2GB RAM and 8GB ROM,
this is the phone http://hdcmobile.com/hdc-space-s7-e...-8gb-rom-fingerprint-edge-control-android-6-0
the thing with "no memory" is that the ROM installed is custom and it's taking all the storage
thebiggboss180 said:
man.. u cant install amd driver on nvidia.. ur will be lucky if ur phone still working
mali400 ? this phone has mali880
Click to expand...
Click to collapse
"u cant install amd driver on nvidia" what are you talking about ?
and I guess you didn't read my thread , my phone is a cloned one (Chinese) , and yes it said GPU: ARM Mali-400 MP
unesever said:
"u cant install amd driver on nvidia" what are you talking about ?
and I guess you didn't read my thread , my phone is a cloned one (Chinese) , and yes it said GPU: ARM Mali-400 MP
Click to expand...
Click to collapse
I think it's first time you are using clone phone. So few info for you.....
First of all you can't flash Any Rom to your phone except the Rom already flashed into your phone.because your phone is unbranded you will never get your original firmware file. You can port Rom to your phone but for this you need backup Rom and which you didn't. Now your only option is search xda with mtk6580 as you said your chipset is! Never flash preloader otherwise your phone will be permanently death.
Please check your phone imei is it available?
Anik49 said:
I think it's first time you are using clone phone. So few info for you.....
First of all you can't flash Any Rom to your phone except the Rom already flashed into your phone.because your phone is unbranded you will never get your original firmware file. You can port Rom to your phone but for this you need backup Rom and which you didn't. Now your only option is search xda with mtk6580 as you said your chipset is! Never flash preloader otherwise your phone will be permanently death.
Please check your phone imei is it available?
Click to expand...
Click to collapse
Hi , I'm new here but I'm familiar with flashing clone phones.
Yes I do have the IMEI , you can see that in the thread.
And No , you can flash different custom ROMs on cloned phones too, you can find them on needrom.com and similar websites , the ROMs simply need to be made for the cloned phone.
For me it's not about the ROM , I already have the working ROM and I have flashed it many times as I have said in the thread. The thing is that in the 5 time , when I flashed the WORKING ROM in my phone , I couldn't use the Touch screen anymore (even in the Chinese recovery tests). So maybe the ROM 3 messed with the screen somehow , even that I never thought wrong ROM can mess with hardware !!
Thanks for your reply tho
Buy a real s7 edge instead of this crap.
Verstuurd vanaf mijn SM-G935F met Tapatalk
kevinjessy said:
Buy a real s7 edge instead of this crap.
Verstuurd vanaf mijn SM-G935F met Tapatalk
Click to expand...
Click to collapse
wow I didn't think of that , thanks for your awesome reply , you saved me
This is what you get, when buying cheap crap stuff, when something goes wrong, you get where you are now.....
Sent from my SM-G930F using XDA-Developers Legacy app
Hi everyone,
I'm searching firmware for my smartwatch (I think it is A1) with chip MT6260MA. I formatted the NOR flash space and flashed wrong firmware. So now I bricked two of these A1 watches without backing up the old firmware listed below.
I've got this smartwatch here:
https://joom.app.link/EJ4Dv9KxbS
[VERSION] MX6M-COB-A1-9307BOE-QCY-GL6133-SGW-V03.91-20180920
[BRANCH] BUILD: BUILD_NO
SERIAL#:
[BUILD TIME] 2018/09/20 10:09
[MRE VERSION] 3100
HAL_VERNO:
And here are some informations about the watch by FlashTool v5.1308.00.00:
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x0000D000 (52KB)
External RAM:
Type = SRAM
Size = 0x00400000 (4MB/32Mb)
NOR Flash:
Device ID = "[WINBOND] W25Q32BV" (226)
Size = 0x00300000 (3MB/24Mb)
Please help me. I have to unbrick two A1 watches. Can anyone make a backup of his firmware and uses the same as mine?
Thank you very much!
I have the same smartwatch as yours, I have the copy of the rom, but I can not extract from the always error "binary and invalid file" I got only one rom after a long time, but the touch does not work
ab-silvas said:
I have the same smartwatch as yours, I have the copy of the rom, but I can not extract from the always error "binary and invalid file" I got only one rom after a long time, but the touch does not work
Click to expand...
Click to collapse
Can you share/upload your rom to me please?
Since now I didn't found a compatible rom for my watch. I don't know where to search now.
droidmanuser said:
Can you share/upload your rom to me please?
Since now I didn't found a compatible rom for my watch. I don't know where to search now.
Click to expand...
Click to collapse
https: / / drive.google.com/file/d/1rVhiaTojakctQcABxQ4BuRlhS2AGanoX/view
if you can extract send me the .zip file thanks
ab-silvas said:
https: / / drive.google.com/file/d/1rVhiaTojakctQcABxQ4BuRlhS2AGanoX/view
if you can extract send me the .zip file thanks
Click to expand...
Click to collapse
Thank you.
Maybe someone can help me to extract this rom dump? I've tried readback extractor mtk 2.0 and 2.4, but it said error invalid file
Has anyone a alternative working firmware for mt6260ma? Or can make a backup/readback file of his watch?
Thanks!
ab-silvas said:
https: / / drive.google.com/file/d/1rVhiaTojakctQcABxQ4BuRlhS2AGanoX/view
if you can extract send me the .zip file thanks
Click to expand...
Click to collapse
Your Readback is corrupted
please make a new one and upload
i can make you all needed files
oxatools said:
Your Readback is corrupted
please make a new one and upload
i can make you all needed files
Click to expand...
Click to collapse
That would be very nice @ab-silvas
The copy of a running smartwatch, maybe the same readback and bought along with mine. Maybe ReadBack comes to this kind of mtk
Still need firmware or readback file for MT6260MA
Please help me.
droidmanuser said:
Still need firmware or readback file for MT6260MA
Please help me.
Click to expand...
Click to collapse
I'm a complete newbee. I've bought a DZ09 clone smartwatch. I don't like the stock firmware. Internet not working. No way to make internet settings. Virtual on-screen keyboard too small. In rest everything is working. I've decided to flash a new firmware, but first i knew I had to create a Readback ROM Dump or ROM Backup for it just in case I flash it with a non-functional firmware and need to revert back to old self. I took it apart to see the IC inside. It has a MEDIATEK ARM MT6260MA chip, a RDA 6625 Quad-Band GSM Wireless Communication chip and a BF6871A1 1.44 inch Touch Screen Digitizer chip. On the board there is a label "MX9-MB-V6.2". Downloading the drivers for the smartwatch and the flashtool was child-play. The hard part was to find a working scatter/config file for the read back to work (within the flash tool software). The smartwatch doesn't respond to usual *#8375# to show up the firmware version. Probably because it's a cheap clone? However there's another obscure code *#3721# which does it. It says: [VERSION]: Q9_60M_240_DZ09_GC6133_CUST_9_9307_1016 [BRANCH]: 11BW1308MP_141108 U8. Then by dialing another non-standard obscure code *#0101# says in a menu it's MRE [VERSION]:3100 [BUILD TIME]: 2018/10/16 and other stuff. Digging deep I've managed to found a working scatter/config file within the ROM file I've downloaded from here https: / / w w w .needrom.com/download/smartwatch-x6-pcb-mx9-mb-v3-5/#. It's a ROM version Q9 61D SWD EU RHF NEW SIX 6123 V3 5 20170214 for a Smartwatch X6 PCB “MX9-MB-V3.5″. I've successfully created the ROM file and then using the Readback Extractor mtk 2.4.exe I've rebuilt the original firmware. I haven't had the chance to test it and hopefully I won't have to. Maybe my stock firmware for MT6260MA might be useful for someone out there: https: / / drive.google.com/file/d/1X5ZeQeR_a9c25Omi3xd4ZYgJhx0vKi1q/view?usp=sharing
niculaegeorge said:
I'm a complete newbee. I've bought a DZ09 clone smartwatch. I don't like the stock firmware. Internet not working. No way to make internet settings. Virtual on-screen keyboard too small. In rest everything is working. I've decided to flash a new firmware, but first i knew I had to create a Readback ROM Dump or ROM Backup for it just in case I flash it with a non-functional firmware and need to revert back to old self. I took it apart to see the IC inside. It has a MEDIATEK ARM MT6260MA chip, a RDA 6625 Quad-Band GSM Wireless Communication chip and a BF6871A1 1.44 inch Touch Screen Digitizer chip. On the board there is a label "MX9-MB-V6.2". Downloading the drivers for the smartwatch and the flashtool was child-play. The hard part was to find a working scatter/config file for the read back to work (within the flash tool software). The smartwatch doesn't respond to usual *#8375# to show up the firmware version. Probably because it's a cheap clone? However there's another obscure code *#3721# which does it. It says: [VERSION]: Q9_60M_240_DZ09_GC6133_CUST_9_9307_1016 [BRANCH]: 11BW1308MP_141108 U8. Then by dialing another non-standard obscure code *#0101# says in a menu it's MRE [VERSION]:3100 [BUILD TIME]: 2018/10/16 and other stuff. Digging deep I've managed to found a working scatter/config file within the ROM file I've downloaded from here https: / / w w w .needrom.com/download/smartwatch-x6-pcb-mx9-mb-v3-5/#. It's a ROM version Q9 61D SWD EU RHF NEW SIX 6123 V3 5 20170214 for a Smartwatch X6 PCB “MX9-MB-V3.5″. I've successfully created the ROM file and then using the Readback Extractor mtk 2.4.exe I've rebuilt the original firmware. I haven't had the chance to test it and hopefully I won't have to. Maybe my stock firmware for MT6260MA might be useful for someone out there: https: / / drive.google.com/file/d/1X5ZeQeR_a9c25Omi3xd4ZYgJhx0vKi1q/view?usp=sharing
Click to expand...
Click to collapse
Thank you so much!
I'll try this out soon.
Backup original
Olá, postei um backup original para você no site needrom:
h t t p s :// w w w .needrom.com/download/original-rom-a1-mt6260/
se não tiver registro no site pode baixar do meu drive:
h t t p s :// drive.google.com/drive/folders/1g3eErhHwYgE_dPfQqn5PYwqUasZwWiH-?usp=sharing
conserta o link retirando espaços para abrir
pierresjm said:
Olá, postei um backup original para você no site needrom:
h t t p s :// w w w .needrom.com/download/original-rom-a1-mt6260/
se não tiver registro no site pode baixar do meu drive:
h t t p s :// drive.google.com/drive/folders/1g3eErhHwYgE_dPfQqn5PYwqUasZwWiH-?usp=sharing
conserta o link retirando espaços para abrir
Click to expand...
Click to collapse
Hi,
thank you very much, but this firmware is also not working. It's not able to flash, I think it is too large.
v8 firmware
ab-silvas said:
I have the same smartwatch as yours, I have the copy of the rom, but I can not extract from the always error "binary and invalid file" I got only one rom after a long time, but the touch does not work
Click to expand...
Click to collapse
same to me with V8 MTK6260MA need rom,cant extract from working watch "binary and invalid file" and cant find rom,please help me
Problems with Mt6260MA and 3072 KiloByte ROM
I also need ROM for MT6260MA.
I have a GT08-Clone with MT6260MA and only 3072 KiloByte ROM. I made a mistake by Read Back, the Length has to be set to 0x00300000, i failed to make a Backup Next Problem is, that the Readback Extraktor is not able to read a ROM with just 3072 KiloByte. Anyway, someone managed, because there is an extracted MT6260MA-ROM with that Size on needrom (ROM DZ09 – mt6260ma). With that ROM I get the Switch-On-Melody, but the Screen is only white..
My original Firmware was x9mb_1.1_cst716a_mjw_gt08_xrm7789_lx9307_xf3029_6153_6133_j_a_v1.0.4 build somewhen end of 2019.
But it had no Browser, so i tried to change it.
Hopefully someone has a Solution..
I recently got a smartwatch from my mother and I don't have his backup, I need help here has his info:
Internal RAM:
Size = 0x0000D000 (52KB)
External RAM:
Type = SRAM
Size = 0x00400000 (4MB/32Mb)
NOR Flash:
Device ID = "[WINBOND] W25Q32BV" (226)
Size = 0x00400000 (4MB/32Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
Me too!
I have a GT08-Clone with MT6260MA and only 3072 KiloByte ROM. I made a mistake by Read Back, the Length has to be set to 0x00300000, i failed to make a Backup Next Problem is, that the Readback Extraktor is not able to read a ROM with just 3072 KiloByte. Anyway, someone managed, because there is an extracted MT6260MA-ROM with that Size on needrom (ROM DZ09 – mt6260ma). With that ROM I get the Switch-On-Melody, but the Screen is only white..
My original Firmware was x9mb_1.1_cst716a_mjw_gt08_xrm7789_lx9307_xf3029_61 53_6133_j_a_v1.0.4 build somewhen End of 2019. But it had no Browser, so i tried to change it..
erzieher said:
I have a GT08-Clone with MT6260MA and only 3072 KiloByte ROM. I made a mistake by Read Back, the Length has to be set to 0x00300000, i failed to make a Backup Next Problem is, that the Readback Extraktor is not able to read a ROM with just 3072 KiloByte. Anyway, someone managed, because there is an extracted MT6260MA-ROM with that Size on needrom (ROM DZ09 – mt6260ma). With that ROM I get the Switch-On-Melody, but the Screen is only white..
My original Firmware was x9mb_1.1_cst716a_mjw_gt08_xrm7789_lx9307_xf3029_61 53_6133_j_a_v1.0.4 build somewhen End of 2019. But it had no Browser, so i tried to change it..
Click to expand...
Click to collapse
did you find the rom file, i found one on 4PDA but the colours of LCD are inverted.
DZ09 MT6260MA 32/24: X9MB_1.1_CST716B_RQ_WB_DZ09_41_7789_9307BOE_6153_6123_J_LANA_V1.0.8
V15D_CSN_PCB01_gprs_MT6260_S00.MAUI_11B_W13_08_MP_V3_F9.bin 2019/11/18
maybe it works for you.
https: //drive.google.com/drive/folders/1XjN9ShkjOM9_ybwbOO8NKdn3fxqiOni_?usp=sharing"]https://drive.google.com/drive/folders/1XjN9ShkjOM9_ybwbOO8NKdn3fxqiOni_?usp=sharing
Mine it's X9MB_1.1_CST716A_MJW_GT08_41_X7789_9340C_6153_6133_J_A_V1.1.1 but i can't find the right firmware, hope somebody help!
WiZoOo said:
did you find the rom file, i found one on 4PDA but the colours of LCD are inverted.
DZ09 MT6260MA 32/24: X9MB_1.1_CST716B_RQ_WB_DZ09_41_7789_9307BOE_6153_6123_J_LANA_V1.0.8
V15D_CSN_PCB01_gprs_MT6260_S00.MAUI_11B_W13_08_MP_V3_F9.bin 2019/11/18
maybe it works for you.
https: //drive.google.com/drive/folders/1XjN9ShkjOM9_ybwbOO8NKdn3fxqiOni_?usp=sharing"]https://drive.google.com/drive/folders/1XjN9ShkjOM9_ybwbOO8NKdn3fxqiOni_?usp=sharing
Mine it's X9MB_1.1_CST716A_MJW_GT08_41_X7789_9340C_6153_6133_J_A_V1.1.1 but i can't find the right firmware, hope somebody help!
Click to expand...
Click to collapse
Thanks WiZoOo,
i have tried that rom, but the same as the rom from needrom. only difference: black screen with backlight, instead of white screen with backlight
i saw that thread on 4pda, but don't know russian language and >400 pages, so i didn't check it. maybe i should try, to see, if there are more roms, i can move to my watch.
anyway i am not shure, if i can find a rom with browser, because of the limited memory. without, the watch is quite useless for me..
help..
i think, i found the right rom on 4pda!
2 days ago someone posted on 4pda.ru/forum/index.php?showtopic=658007&st=6680 these two roms for gt08:
Прикрепленный файлпрошивка.rar ( 2,56 МБ )
Прикрепленный файлbackup_MT6260MA_32_24.rar ( 2,61 МБ )
but when i click it, i get 404-error. i think, only because i am not locked in.. but i can not register, because i don't know russian language and can't pass the anti-robot-check
please, anyone can help me, by getting these roms, or maybe send me login-data for 4pda?
erzieher said:
i think, i found the right rom on 4pda!
2 days ago someone posted on 4pda.ru/forum/index.php?showtopic=658007&st=6680 these two roms for gt08:
Прикрепленный файлпрошивка.rar ( 2,56 МБ )
Прикрепленный файлbackup_MT6260MA_32_24.rar ( 2,61 МБ )
but when i click it, i get 404-error. i think, only because i am not locked in.. but i can not register, because i don't know russian language and can't pass the anti-robot-check
please, anyone can help me, by getting these roms, or maybe send me login-data for 4pda?
Click to expand...
Click to collapse
well, the first one work on my GT08, i give you the link and hope works on your smartwatch, thank you for the files.
http s:// drive.google.com/file/d/1RE0716sejuj0X2vmXfg0btI7WvVwv3Km/view?usp=sharing
http s:// drive.google.com/file/d/1E_dWJrFn-rCMXPrG6APlQ3YOZUnxQrE5/view?usp=sharing
WiZoOo said:
well, the first one work on my GT08, i give you the link and hope works on your smartwatch, thank you for the files.
http s:// drive.google.com/file/d/1RE0716sejuj0X2vmXfg0btI7WvVwv3Km/view?usp=sharing
http s:// drive.google.com/file/d/1E_dWJrFn-rCMXPrG6APlQ3YOZUnxQrE5/view?usp=sharing
Click to expand...
Click to collapse
thanks WiZoOo,
i tryed both. seem to work on my watch (start-melody), but screen stay black. one question to you: do you have a browser now? if so, i will try to find the screendriver in the rom and try to change it, to get my watch propper working
erzieher said:
thanks WiZoOo,
i tryed both. seem to work on my watch (start-melody), but screen stay black. one question to you: do you have a browser now? if so, i will try to find the screendriver in the rom and try to change it, to get my watch propper working
Click to expand...
Click to collapse
yes, sorry for answer too late, it's hard to edit the rom file, i don't find anything about to change clock and even the icons and i'm not sure if you could find the right software to edit and mod the ROM file...
well, it was a cheap watch (< 10 €). I just let it lay arround and wait for the right rom to turn up. i did the same with amazon fire hd8 2018, after i lost temp root by auto-update to 6.3.1.2 last autumn (i'm shure i deaktivated upate-process before). and a little while ago, a clever guy managed to flash bootloader and shared instruction. so its working now with lineage os 15 very well. time sometimes solve all problems