Related
Hello there,
My new Samsung Galaxy S5 [SM-G900L] just came in.
It wanted to install custom recovery from TWRP so I could make a backup of my Stock Rom and afterwards could install custom Roms, but there doesn't seem to be any support for the G900L.
I'm quite new here, but is it possible someone can help me with this? So that TWRP will aslo provide support to the G900L.
I'm willing to sent al the necessary files. But you'll have to gide me trough it.
Thanks in advance.
Anybody??
Good luck.. i tried looking for anything related to the 900L model but there's barely any support on it.
chaulklet said:
Good luck.. i tried looking for anything related to the 900L model but there's barely any support on it.
Click to expand...
Click to collapse
Thanks, but yeah, that is why I opened this thread. Because I couldn't find anything about my G900L either
And because I'm new I can't post anything in the development section T.T
I hope someone picks this up though.
Yup I fell ya
/Bump for support
SM 900L Support
Another one for 900L support. Got the phone rooted no problem but failed to install CWM or TWRP yesterday so no custom recoveries available . Got a boot loop for my efforts. Hope there is enough love out there for someone to tweak some of the packages for these phones.
Cheers.
Successfully installed TWRP and CyanogeMmod recoveries on my SM-G900L
Sorry for the very long delay. I only got this mobile last month. I am able to install TWRP recovery by using TWRP manager after rooting (Although his device is not supported officially, the recovery image for the international version (SM-G900F) works really fine. I also successfully flash CyanogenMod (both View attachment Snapshot_recovery.tar and View attachment Nigthy_recovery.tar) recovery images using odin.
sunilpaulmathew said:
Sorry for the very long delay. I only got this mobile last month. I am able to install TWRP recovery by using TWRP manager after rooting (Although his device is not supported officially, the recovery image for the international version (SM-G900F) works really fine. I also successfully flash CyanogenMod (both View attachment 3536028 and View attachment 3536027) recovery images using odin.
Click to expand...
Click to collapse
I have tried many times to use TWRP recovery on G900Lmodel but with no success.
I always end up with "COULD NOT DO NORMAL BOOT".
Also I need one help, I was trying to use this Custom ROM "Insanity S7 edge port", I again get the same message " COULD NOT DO NORMAL BOOT".
Someone told me it's the kernel problem and i have to flash stock kernel after flashing ROM zip. But the thing is I don't have the stock kernel.
Please help.
sachin7825 said:
I have tried many times to use TWRP recovery on G900Lmodel but with no success.
I always end up with "COULD NOT DO NORMAL BOOT".
Also I need one help, I was trying to use this Custom ROM "Insanity S7 edge port", I again get the same message " COULD NOT DO NORMAL BOOT".
Someone told me it's the kernel problem and i have to flash stock kernel after flashing ROM zip. But the thing is I don't have the stock kernel.
Please help.
Click to expand...
Click to collapse
TWRP for kltelget (SM-G900L) is available here. You can also use the TWRP for klte (SM-G900F). The details are available in my xda thread (latest version is not tested). You can boot most Phoenix kernel (I hope Insanity too) based ROMs by either flashing the stock ROM boot.img or a custom boot.img sited in my another xda thread located here (check second post).
sunilpaulmathew said:
TWRP for kltelget (SM-G900L) is available here. You can also use the TWRP for klte (SM-G900F). The details are available in my xda thread (latest version is not tested). You can boot most Phoenix kernel (I hope Insanity too) based ROMs by either flashing the stock ROM boot.img or a custom boot.img sited in my another xda thread located here (check second post).
Click to expand...
Click to collapse
Thank you sunil
I tried the recoveries that you are suggesting, both of them, klte and klteskt from the twrp site.
It seems to work on every other device but mine.
Can't figure what I am doing wrong.
sachin7825 said:
Thank you sunil
I tried the recoveries that you are suggesting, both of them, klte and klteskt from the twrp site.
It seems to work on every other device but mine.
Can't figure what I am doing wrong.
Click to expand...
Click to collapse
Not sure abt the latest versions. can you try the one (klte) linked in my xda thread. and hope ur device is rooted properly...
sunilpaulmathew said:
Not sure abt the latest versions. can you try the one (klte) linked in my xda thread. and hope ur device is rooted properly...
Click to expand...
Click to collapse
yes i will try them, I hope they work on latest MM.
And yes the device is rooted properly with latest CFautoroot for G900L, I even checked it with Root Checker basic.
Anyways, I don't have any special liking for TWRP, I wanted it to flash stock boot.img to make the Insanity ROM work.
I am ok with CWM recovery, but I was told it could not flash .img file and I am not equipped to make my own flashable zip form boot.img.
But now I am planning to use your modded boot.img for Phoneix based MM custom ROMs. I hope that will work.
Btw thank you so much...I checked both of your threads...They are awesome....you seem to be lone warrior for these Korean variants. Not much support elsewhere.
Really appreciate your efforts!!!!
Keep up the good work.
sunilpaulmathew said:
TWRP for kltelget (SM-G900L) is available here. You can also use the TWRP for klte (SM-G900F). The details are available in my xda thread (latest version is not tested). You can boot most Phoenix kernel (I hope Insanity too) based ROMs by either flashing the stock ROM boot.img or a custom boot.img sited in my another xda thread located here (check second post).
Click to expand...
Click to collapse
TWRP worked!!!
Finally..
Thank you so much!!!
Also I tried your kernel with Insanity ROM and it works perfect.!!!
Thank you once again.
Hello,
Can somebody help me with my SM-910K, i tried to root it using cf-auto-root but it didnt work. After that the phone reboot but it is only showing Note 4 logo and Olleg G. I tried to clear cache and wipe partition but still no luck. Can anyone please help? Thanks in advance
fannyman said:
Hello,
Can somebody help me with my SM-910K, i tried to root it using cf-auto-root but it didnt work. After that the phone reboot but it is only showing Note 4 logo and Olleg G. I tried to clear cache and wipe partition but still no luck. Can anyone please help? Thanks in advance
Click to expand...
Click to collapse
5.1.1 Lollipop Stock ROM can't be ROOTed without a permissive custom kernel
Hello buddy, as mentioned above, it cannot be rooted without a custom, permissive kernel. This thread also needs to be moved to Q&A
d4rkkn16ht said:
5.1.1 Lollipop Stock ROM can't be ROOTed without a permissive custom kernel
Click to expand...
Click to collapse
Sir, how can i fix my bootloop N910k? please help me
speedyjay said:
Hello buddy, as mentioned above, it cannot be rooted without a custom, permissive kernel. This thread also needs to be moved to Q&A
Click to expand...
Click to collapse
Sorry sir, i will move my concern to Q&A. please continue helping me.
fannyman said:
Sir, how can i fix my bootloop N910k? please help me
Click to expand...
Click to collapse
To fix the boot loop just re-Flash stock ROM (but no root yet)
Then find & flash custom PERMISSIVE Kernel for your Note 4 type if you are still want to be rooted.
d4rkkn16ht said:
To fix the boot loop just re-Flash stock ROM (but no root yet)
Then find & flash custom PERMISSIVE Kernel for your Note 4 type if you are still want to be rooted.
Click to expand...
Click to collapse
I have flashed stock ROM many times. but there's an error about NAND write "FAIL". how can i fix this?
fannyman said:
I have flashed stock ROM many times. but there's an error about NAND write "FAIL". how can i fix this?
Click to expand...
Click to collapse
you are facing a locked bootloader as we all are (both exy and snap) the only solution to fix your bootloop is to install apps like phone info then find out what your phone PDA version is then find the exact PDA from Sammobile or if you you are Having an 910C flash latest COJ5 rom or if you are on 910H try installing COJ4 rom (just download and install the latest frimware from sammobile or ... and you will be just fine )
Hi,
I already have a same problem with you, but i can through this..
you just find the right Firmware, its mean the latest firmware, try to download from sammoblie.com and find firmware for N910K picked the latest one. or folow this link : http://www.sammobile.com/firmwares/download/58333/N910KKTU2COJ5_N910KKTC2COJ5_KTC/
after download you just flash via Odin.
goodluck
fannyman said:
I have flashed stock ROM many times. but there's an error about NAND write "FAIL". how can i fix this?
Click to expand...
Click to collapse
Please provide me some information regarding your problem:
How did you flash stock ROM?
What is the type of stock ROM that you flash?
Can you enter Download Mode / Odin Mode?
Hello guys, i have a problem. My phone is j500F 2015. I can't root this phone. When ı try root I'm getting this an error ''rcovery is not seandroid enforcing''. I need true root.zip and twrp current version. Please help me.
Or use the search
(Tutorial) Upgrade J5 (2015) to 6.0 and Downgrade to 5.1.1 + Rooting
American_Jesus said:
Or use the search
(Tutorial) Upgrade J5 (2015) to 6.0 and Downgrade to 5.1.1 + Rooting
Click to expand...
Click to collapse
Thanks for reply. İs this for j500F 2015?
Nevarress said:
Thanks for reply. İs this for j500F 2015?
Click to expand...
Click to collapse
Read the thread name one more time, you will find out.
American_Jesus said:
Read the thread name one more time, you will find out.
Click to expand...
Click to collapse
Okey i found it. Thanks again.
@American_Jesus Sorry for this. I can't do twrp. When i download twrp via odin, phone is turn back old cwm. What's wrong? Can you help me?
Nevarress said:
@American_Jesus Sorry for this. I can't do twrp. When i download twrp via odin, phone is turn back old cwm. What's wrong? Can you help me?
Click to expand...
Click to collapse
You just need to follow the Install Instructions on respective threads to your Android version.
[RECOVERY][T.W.R.P-3.0.2.0]Samsung Galaxy J5 [Android 5.1.1]
[RECOVERY] [TWRP-3.0.2-0] Samsung Galaxy J5 [MM][Android 6.0.1]
Use this Odin https://www.androidfilehost.com/?w=files&flid=95375
You can follow this video to see how to install TWRP (ONLY)
Follow only the video instructions to install TWRP, do not use any other links or files
PS: most of the custom ROMs uses Lollypop firmware, i suggest to downgrade to Lollypop before install any custom ROM
Nevarress said:
Hello guys, i have a problem. My phone is j500F 2015. I can't root this phone. When ı try root I'm getting this an error ''rcovery is not seandroid enforcing''. I need true root.zip and twrp current version. Please help me.
Click to expand...
Click to collapse
Don't follow instructions here,i mean, it is easier for you to go on youtube and watch how. That is how i rooted, trype on youtube how to root galaxy j5 2015, and first video that comes in search that is it, just don't forget to enable OEM unlock.
Video:
Nevarress said:
@American_Jesus Sorry for this. I can't do twrp. When i download twrp via odin, phone is turn back old cwm. What's wrong? Can you help me?
Click to expand...
Click to collapse
Well you must READ carefully, your problem has solution. Don't forget when flashing twrp to uncheck auto reboot option from Odin, so after twrp flash with Odin you push out battery for 5 sec. and power on with buttons combo into recovery and twrp will ask you if you want to make this changes permanent, just swipe and you're done.?☺?
Taivotat2 said:
Well you must READ carefully, your problem has solution. Don't forget when flashing twrp to uncheck auto reboot option from Odin, so after twrp flash with Odin you push out battery for 5 sec. and power on with buttons combo into recovery and twrp will ask you if you want to make this changes permanent, just swipe and you're done.?☺?
Click to expand...
Click to collapse
There's no need to pull battery out, you reboot by press and hold Volume down+Power
Then quickly press Volume Up+Home+power to go to recover
American_Jesus said:
There's no need to pull battery out, you reboot by press and hold Volume down+Power
Then quickly press Volume Up+Home+power to go to recover
Click to expand...
Click to collapse
Yes sir, forgot this ty ☺??
Taivotat2 said:
Well you must READ carefully, your problem has solution. Don't forget when flashing twrp to uncheck auto reboot option from Odin, so after twrp flash with Odin you push out battery for 5 sec. and power on with buttons combo into recovery and twrp will ask you if you want to make this changes permanent, just swipe and you're done.?☺?
Click to expand...
Click to collapse
Thanks for help. I rooted my phone. However, i have a new problem. When i reboot my phone i'm getting set warrently kernel error on the left up screen. So it does not matter my phone is working.
American_Jesus said:
There's no need to pull battery out, you reboot by press and hold Volume down+Power
Then quickly press Volume Up+Home+power to go to recover
Click to expand...
Click to collapse
You are right. Thanks for help. My phone is rooted now.
Nevarress said:
Thanks for help. I rooted my phone. However, i have a new problem. When i reboot my phone i'm getting set warrently kernel error on the left up screen. So it does not matter my phone is working.
You are right. Thanks for help. My phone is rooted now.
Click to expand...
Click to collapse
Dont worry about it it just shows you that you have "messed" with device. Its the same for us too. It shows the state of your phone after "modding" it. Regards and now happy flashing for you!!! ?☺
@Taivotat2 hi, again me. Can i flash rom to my phone now? İf you use already a rom,
Which rom do you recommend?
Nevarress said:
@Taivotat2 hi, again me. Can i flash rom to my phone now? İf you use already a rom,
Which rom do you recommend?
Click to expand...
Click to collapse
Go here
https://forum.xda-developers.com/galaxy-j5
Its everything you should know about our device, pay attention your model j500f. And important you know the TWRP youre using, it differs when youre are with lollipop and marshmallow. I will suppose that youre on Marshmallow right now, so there are ROMs you can flash straight through twrp. If you wish to try Nougat ROMs, better downgrade as American Jesus States above. Remember to READ carefully, as many of your questions has been answered before. I prefer stable roms, less bugs than newer ones. Try first a ROM without downgrading like CM13 port by Zonik, or stock based ones, just to get confident on your skills, after this you can test downgrading, to taste the latest Nougat and others non-nougat roms that relies on Lollipop firmware. Take your time to first learn and know your device specs and you'll be fine. Hope this help you ???
Taivotat2 said:
Go here
https://forum.xda-developers.com/galaxy-j5
Its everything you should know about our device, pay attention your model j500f. And important you know the TWRP youre using, it differs when youre are with lollipop and marshmallow. I will suppose that youre on Marshmallow right now, so there are ROMs you can flash straight through twrp. If you wish to try Nougat ROMs, better downgrade as American Jesus States above. Remember to READ carefully, as many of your questions has been answered before. I prefer stable roms, less bugs than newer ones. Try first a ROM without downgrading like CM13 port by Zonik, or stock based ones, just to get confident on your skills, after this you can test downgrading, to taste the latest Nougat and others non-nougat roms that relies on Lollipop firmware. Take your time to first learn and know your device specs and you'll be fine. Hope this help you ??
Click to expand...
Click to collapse
What u say about this rom?
https://forum.xda-developers.com/galaxy-j5/development/rom-aospextended-rom-v3-2-galaxy-j5-t3569913
Nevarress said:
What u say about this rom?
https://forum.xda-developers.com/galaxy-j5/development/rom-aospextended-rom-v3-2-galaxy-j5-t3569913
Click to expand...
Click to collapse
This one? I think its the better by now of Nougat roms. Im currently using it ?
Go here
https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
You will use Odin to flash ONLY bootloader, if you flash modem you can loose your WiFi.
As youre in Marshmallow you will pick the Lollipop bootloader. You must pick the TWRP of Lollipop too to avoid incompatibilities with the changed bootloader . You follow the instructions sequencially First flash lollipop bootloader and without leave Odin you flash the Lollipop TWRP. American Jesus show you the thread above. And voil
And youre done and ready to flash the ROM ????
Taivotat2 said:
And youre done and ready to flash the ROM
Click to expand...
Click to collapse
Thanks for everything. But ı dont understand this steps. Can you write like that; step1: step2: step:3
Also, do I need to reinstall the original software (5.1.1)?
Taivotat2 said:
Go here
https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
Click to expand...
Click to collapse
First step
I have installed resurrection mod on my phone, this part is working at the moment.
I followed a tutorial to install it using twrp, however everytime i tried to launch it i would get a pixilated yellow screen and the phone would freeze on the android logo.
I followed this guide https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
Now the phone loads into resurrection fine, however when i try to go into recovery mode the phone has black and white noise at the top like an old TV and it freezes.
I have tried installing TWRP again with no luck.
What should i try now?
whittney said:
I have installed resurrection mod on my phone, this part is working at the moment.
I followed a tutorial to install it using twrp, however everytime i tried to launch it i would get a pixilated yellow screen and the phone would freeze on the android logo.
I followed this guide https://forum.xda-developers.com/galaxy-j5/how-to/6-0-1-5-1-1-bootloader-modem-j500xx-t3566801
Now the phone loads into resurrection fine, however when i try to go into recovery mode the phone has black and white noise at the top like an old TV and it freezes.
I have tried installing TWRP again with no luck.
What should i try now?
Click to expand...
Click to collapse
I also used their BL and Modem, but it didn't work for me either. So when they ask you (in ROM Threads) to have 5.1.1 or 6.0.1, you'd better flash the whole firmware.
do you have a guide on how to do that?
whittney said:
do you have a guide on how to do that?
Click to expand...
Click to collapse
What is your RR ROM? Are u with the official TWRP installed?
JohnTryingToRoot said:
I also used their BL and Modem, but it didn't work for me either. So when they ask you (in ROM Threads) to have 5.1.1 or 6.0.1, you'd better flash the whole firmware.
Click to expand...
Click to collapse
Taivotat2 said:
What is your RR ROM? Are u with the official TWRP installed?
Click to expand...
Click to collapse
Hi dude right now i have nothing on my phone but TWRP, if it try to start my phone it shows the samsung logo, then the screen goes yellow very slow and freezes..
whittney said:
Hi dude right now i have nothing on my phone but TWRP, if it try to start my phone it shows the samsung logo, then the screen goes yellow very slow and freezes..
Click to expand...
Click to collapse
Your problem has solution, but you should give us proper and more detailed info about your issue, which RR rom you were using or people must guess it? Which the latest ROM you flashed? Are you with official TWRP?
C'mon make an effort and tell your specs correctly so any member could guide you.
Taivotat2 said:
Your problem has solution, but you should give us proper and more detailed info about your issue, which RR rom you were using or people must guess it? Which the latest ROM you flashed? Are you with official TWRP?
C'mon make an effort and tell your specs correctly so any member could guide you.
Click to expand...
Click to collapse
Sorry i have been trying to fix this all day and have not had much sleep.
This is the RR mod i used
https://forum.xda-developers.com/galaxy-j5/development/rom-resurrectionremix-v5-8-1-t3566035
This is the version of TWRP
https://twrp.me/site/update/2016/04/05/twrp-3.0.2-0-released.html
I cant seem to update TWRP to the latest version, i downloaded this image
https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
However, the image does not show up on my TWRP install explorer.
whittney said:
Sorry i have been trying to fix this all day and have not had much sleep.
This is the RR mod i used
https://forum.xda-developers.com/galaxy-j5/development/rom-resurrectionremix-v5-8-1-t3566035
This is the version of TWRP
https://twrp.me/site/update/2016/04/05/twrp-3.0.2-0-released.html
I cant seem to update TWRP to the latest version, i downloaded this image
https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
However, the image does not show up on my TWRP install explorer.
Click to expand...
Click to collapse
Download the latest and official TWRP from here
https://forum.xda-developers.com/ga...nofficial-twrp-3-1-x-galaxy-sm-j500h-t3588533
Taivotat2 said:
Download the latest and official TWRP from here
https://forum.xda-developers.com/ga...nofficial-twrp-3-1-x-galaxy-sm-j500h-t3588533
Click to expand...
Click to collapse
To note i was running android 6.0.1 marshmallow on my original rom.
TWRP now updated to 3.1.1-1.
whittney said:
To note i was running android 6.0.1 marshmallow on my original rom.
TWRP now updated to 3.1.1-1.
Click to expand...
Click to collapse
If you are with marshmallow bootloader you can flash Vince sources based ROMs. Validus by tioguda, Lineage by Vince, RR unofficial by Has.
If you want AOSPExt, Viper, RR official, you must downgrade to lollipop as stated by user above??, as these ROMs are Dyneteve's sources based ROMs which boot only with lollipop bootloader.
Taivotat2 said:
If you are with marshmallow bootloader you can flash Vince sources based ROMs. Validus by tioguda, Lineage by Vince, RR unofficial by Has.
If you want AOSPExt, Viper, RR official, you must downgrade to lollipop as stated by user above, as these ROMs are Dyneteve's sources based ROMs which boot only with lollipop bootloader.
Click to expand...
Click to collapse
Do you have a link to them i dont know what you mean.
Im sorry i am new to this and very tired.
whittney said:
do you have a guide on how to do that?
Click to expand...
Click to collapse
Plenty of explanations in J5 forums. Please take your time to read, read and more reading, as your issues were solved before and you will be fine.?
Taivotat2 said:
Plenty of explanations in J5 forums. Please take your time to read, read and more reading, as your issues were solved before and you will be fine.
Click to expand...
Click to collapse
Tried to install the rom again, after reset the samsung logo shows and my screen slowly goes yellow and freezes.
Now trying this rom
https://forum.xda-developers.com/ga...om-lineage-os-14-1-samsung-galaxy-j5-t3549552
whittney said:
Now trying this rom
https://forum.xda-developers.com/ga...om-lineage-os-14-1-samsung-galaxy-j5-t3549552
Click to expand...
Click to collapse
Stop. Mate, you must downgrade to install this one. READ at least the OP, man.
Same issue ...
There is also text saying warranty bit Kernel at the top in yellow text
whittney said:
Same issue ...
There is also text saying warranty bit Kernel at the top in yellow text
Click to expand...
Click to collapse
The message is normal. Help us to help you bro, and READ CAREFULLY the OP (first post) of each ROM thread, as you will find the necessary information to be fine.
Taivotat2 said:
The message is normal. Help us to help you bro, and READ CAREFULLY the OP (first post) of each ROM thread, as you will find the necessary information to be fine.
Click to expand...
Click to collapse
Are you referring to the android version ? So i need to find one that is 6.0.1 yes?
Like this one?
https://forum.xda-developers.com/grand-prime/development/rom-lineageos-sm-g530w-t-t1-p-t3546155
Ok still doing the yellow screen thing, but now have a new error.
Kernel is not seandroid enforcing
OOOOMMMMGGGGG. Someone to help me now?
I went thru every single thread, i have the latest TWRP 3.2.1, so no Error 7.
The ROM's install (i've tried Unofficial/RR/PixelExperience/BootLeggers/Cosmic/AOSIP) and the install goes smooth, but all stuck on Bootloop!
What on earth am I doing wrong? I can't find anyone mentioning specific Kernel or where to get an OREO specific Kernel.
Is there a Boot.img ? do i need to flash it as well? (no one says so in instructions)
The last rom i've got is the Official 7.1.2 which boots without a problem.
Note: But only the 20171025 build, nothing after that even of 7.1.2 doesn't boot (just has bootloop)
Device Specs as Appear on the back: YU4711, H/W ver V2.0, S/W ver: V0.0.9_171215, (2+8) GB
Have you updated the modem from cyanogen 14.0 then try again.
BTW you should made in discussion.
Flash your Phone with stock ROM
YU_YU4711_SW_V0.0.9_HW_V1.0_171215_2016012715.zip .
This can resolve your problem.
The AndroidGuy said:
Have you updated the modem from cyanogen 14.0 then try again.
BTW you should made in discussion.
Click to expand...
Click to collapse
I didn't know there is a new Modem from CM14, do you have a link or a name?
RoHiTkUmArShArMa said:
Flash your Phone with stock ROM
YU_YU4711_SW_V0.0.9_HW_V1.0_171215_2016012715.zip .
This can resolve your problem.
Click to expand...
Click to collapse
I'm sorry, but why on earth would I want to put my phone back on v5.1.1 ?
Sefy said:
I'm sorry, but why on earth would I want to put my phone back on v5.1.1 ?
Click to expand...
Click to collapse
It have some other files also including android 5... So flash this
And then flash twrp
Reflash the entire stock firmware *except system, userdata, recovery, cache* through fastboot, then you should be good to go.
ask in Q/A thread
RoHiTkUmArShArMa said:
It have some other files also including android 5... So flash this
And then flash twrp
Click to expand...
Click to collapse
I honestly don't see the logic in putting the phone back into Stock ROM of Android 5.1.1, when I can use it with 7.1.2 without a problem and only flashing of new ROM's is an issue.
But I have found something that may give more information, this is HW_V2 , so i'm assuming this device is the YU YUNIQUE 2 which is basically identical but with 2GB ram instead of 1GB ram.
Sefy said:
I honestly don't see the logic in putting the phone back into Stock ROM of Android 5.1.1, when I can use it with 7.1.2 without a problem and only flashing of new ROM's is an issue.
But I have found something that may give more information, this is HW_V2 , so i'm assuming this device is the YU YUNIQUE 2 which is basically identical but with 2GB ram instead of 1GB ram.
Click to expand...
Click to collapse
Can you able to boot into official LineageOS without editing updater-script?
The AndroidGuy said:
Can you able to boot into official LineageOS without editing updater-script?
Click to expand...
Click to collapse
As I mentioned, I can boot into 7.1.2 (that's LineageOS), but the latest i'm able to boot is 25/10/2017 and any build after, goes into bootloop.
Sefy said:
As I mentioned, I can boot into 7.1.2 (that's LineageOS), but the latest i'm able to boot is 25/10/2017 and any build after, goes into bootloop.
Click to expand...
Click to collapse
Maybe it is time to change device.
The AndroidGuy said:
Maybe it is time to change device.
Click to expand...
Click to collapse
Right....
I resolved the issue after way too much digging around, the issue was flashing the specific NON-HLOS.bin and now I can flash v8.x and v9.x roms
The one that resolved my issue came from this link: https://androidfilehost.com/?fid=817550096634760193
Help me
Can you tell me how to use this file plzz and thnx for solving this prb @Sefy
wise7709 said:
Can you tell me how to use this file plzz and thnx for solving this prb @Sefy
Click to expand...
Click to collapse
You need to flash it using: fastboot flash modem non-hls.bin
Then reboot and flashing of the ROM should go correctly and for me atleast, it booted up.