Hello there,
My new Samsung Galaxy S5 [SM-G900L] just came in.
It wanted to install custom recovery from TWRP so I could make a backup of my Stock Rom and afterwards could install custom Roms, but there doesn't seem to be any support for the G900L.
I'm quite new here, but is it possible someone can help me with this? So that TWRP will aslo provide support to the G900L.
I'm willing to sent al the necessary files. But you'll have to gide me trough it.
Thanks in advance.
Anybody??
Good luck.. i tried looking for anything related to the 900L model but there's barely any support on it.
chaulklet said:
Good luck.. i tried looking for anything related to the 900L model but there's barely any support on it.
Click to expand...
Click to collapse
Thanks, but yeah, that is why I opened this thread. Because I couldn't find anything about my G900L either
And because I'm new I can't post anything in the development section T.T
I hope someone picks this up though.
Yup I fell ya
/Bump for support
SM 900L Support
Another one for 900L support. Got the phone rooted no problem but failed to install CWM or TWRP yesterday so no custom recoveries available . Got a boot loop for my efforts. Hope there is enough love out there for someone to tweak some of the packages for these phones.
Cheers.
Successfully installed TWRP and CyanogeMmod recoveries on my SM-G900L
Sorry for the very long delay. I only got this mobile last month. I am able to install TWRP recovery by using TWRP manager after rooting (Although his device is not supported officially, the recovery image for the international version (SM-G900F) works really fine. I also successfully flash CyanogenMod (both View attachment Snapshot_recovery.tar and View attachment Nigthy_recovery.tar) recovery images using odin.
sunilpaulmathew said:
Sorry for the very long delay. I only got this mobile last month. I am able to install TWRP recovery by using TWRP manager after rooting (Although his device is not supported officially, the recovery image for the international version (SM-G900F) works really fine. I also successfully flash CyanogenMod (both View attachment 3536028 and View attachment 3536027) recovery images using odin.
Click to expand...
Click to collapse
I have tried many times to use TWRP recovery on G900Lmodel but with no success.
I always end up with "COULD NOT DO NORMAL BOOT".
Also I need one help, I was trying to use this Custom ROM "Insanity S7 edge port", I again get the same message " COULD NOT DO NORMAL BOOT".
Someone told me it's the kernel problem and i have to flash stock kernel after flashing ROM zip. But the thing is I don't have the stock kernel.
Please help.
sachin7825 said:
I have tried many times to use TWRP recovery on G900Lmodel but with no success.
I always end up with "COULD NOT DO NORMAL BOOT".
Also I need one help, I was trying to use this Custom ROM "Insanity S7 edge port", I again get the same message " COULD NOT DO NORMAL BOOT".
Someone told me it's the kernel problem and i have to flash stock kernel after flashing ROM zip. But the thing is I don't have the stock kernel.
Please help.
Click to expand...
Click to collapse
TWRP for kltelget (SM-G900L) is available here. You can also use the TWRP for klte (SM-G900F). The details are available in my xda thread (latest version is not tested). You can boot most Phoenix kernel (I hope Insanity too) based ROMs by either flashing the stock ROM boot.img or a custom boot.img sited in my another xda thread located here (check second post).
sunilpaulmathew said:
TWRP for kltelget (SM-G900L) is available here. You can also use the TWRP for klte (SM-G900F). The details are available in my xda thread (latest version is not tested). You can boot most Phoenix kernel (I hope Insanity too) based ROMs by either flashing the stock ROM boot.img or a custom boot.img sited in my another xda thread located here (check second post).
Click to expand...
Click to collapse
Thank you sunil
I tried the recoveries that you are suggesting, both of them, klte and klteskt from the twrp site.
It seems to work on every other device but mine.
Can't figure what I am doing wrong.
sachin7825 said:
Thank you sunil
I tried the recoveries that you are suggesting, both of them, klte and klteskt from the twrp site.
It seems to work on every other device but mine.
Can't figure what I am doing wrong.
Click to expand...
Click to collapse
Not sure abt the latest versions. can you try the one (klte) linked in my xda thread. and hope ur device is rooted properly...
sunilpaulmathew said:
Not sure abt the latest versions. can you try the one (klte) linked in my xda thread. and hope ur device is rooted properly...
Click to expand...
Click to collapse
yes i will try them, I hope they work on latest MM.
And yes the device is rooted properly with latest CFautoroot for G900L, I even checked it with Root Checker basic.
Anyways, I don't have any special liking for TWRP, I wanted it to flash stock boot.img to make the Insanity ROM work.
I am ok with CWM recovery, but I was told it could not flash .img file and I am not equipped to make my own flashable zip form boot.img.
But now I am planning to use your modded boot.img for Phoneix based MM custom ROMs. I hope that will work.
Btw thank you so much...I checked both of your threads...They are awesome....you seem to be lone warrior for these Korean variants. Not much support elsewhere.
Really appreciate your efforts!!!!
Keep up the good work.
sunilpaulmathew said:
TWRP for kltelget (SM-G900L) is available here. You can also use the TWRP for klte (SM-G900F). The details are available in my xda thread (latest version is not tested). You can boot most Phoenix kernel (I hope Insanity too) based ROMs by either flashing the stock ROM boot.img or a custom boot.img sited in my another xda thread located here (check second post).
Click to expand...
Click to collapse
TWRP worked!!!
Finally..
Thank you so much!!!
Also I tried your kernel with Insanity ROM and it works perfect.!!!
Thank you once again.
Related
Hi.
Where can I find the TWRP recovery compatible with my phone version?
Thanks.
I know it is not exactly what you asked for, but for now you can use the ClockWorkMod (CWM) as a work around.
I'm using the version shared in this post (CWM 6.0.4.1 flashable zip) and it works fine.
If you find a compatible TWRP please share, I'm also interested in it.
esneson said:
I know it is not exactly what you asked for, but for now you can use the ClockWorkMod (CWM) as a work around.
I'm using the version shared in this post (CWM 6.0.4.1 flashable zip) and it works fine.
If you find a compatible TWRP please share, I'm also interested in it.
Click to expand...
Click to collapse
I have the latest version of TWRP installed, but I can't flash THIS ROM correctly because of an error...
EDIT: I've succesfully installed the 4.4 KitKat on my mobile with your CWM.
Thanks alot!
By the way, where did you find the TWRP that you tried on your L5?
Did you compiled it yourself?
Hey, which rom did u flash? I m curious to know which one u used as u mentioned u got kitkat wid it.
Sent from my LG-E610 using xda app-developers app
How do I enter the CWM recovery? I tried pressing vol+ / vol- and both together with power on, but I only get a brief flashing of the LEDs.
I have tried a lot of things, and already flashed CWM 6.0.2.8, 6.0.4.1, and 6.0.5.0. I also wrote lengthy posts about the stuff I tried. (I still can't open my own threads, hence I am trying to ask here and there.)
davideakc said:
Hi.
Where can I find the TWRP recovery compatible with my phone version?
Thanks.
Click to expand...
Click to collapse
I recommend using the TWRP 3.0.0 my friend @Jonas Cardoso
Here is the thread link: http://forum.xda-developers.com/opt...overy-twrp-3-0-0-1-l5-e610-e612-e617-t3331127
Antonio Almeida Filho said:
I recommend using the TWRP 3.0.0 my friend @Jonas Cardoso
Here is the thread link: http://forum.xda-developers.com/opt...overy-twrp-3-0-0-1-l5-e610-e612-e617-t3331127
Click to expand...
Click to collapse
Soon i will update to 3.0.0-2
Ok, first of all, my phone model is i9505 (Samsung Galaxy S4 International version).
I installed last week a new kernel: http://forum.xda-developers.com/showthread.php?t=2297379 on my phone.
Today I tried to install the cyanogenmod 10.2, now the recovery edition of PhilZ Touch says everytime that there is a prob i9505G etc, which I don't understand.
I think the kernel changed my phone number to i9505G, someone who can help me with this? Thanks.
tareqnull said:
Ok, first of all, my phone model is i9505 (Samsung Galaxy S4 International version).
I installed last week a new kernel: http://forum.xda-developers.com/showthread.php?t=2297379 on my phone.
Today I tried to install the cyanogenmod 10.2, now the recovery edition of PhilZ Touch says everytime that there is a prob i9505G etc, which I don't understand.
I think the kernel changed my phone number to i9505G, someone who can help me with this? Thanks.
Click to expand...
Click to collapse
Hello mate, try a different kernel http://forum.xda-developers.com/showthread.php?t=2502714 then update your philz recovery to newer. have a nice day.
Repulsa said:
Hello mate, try a different kernel http://forum.xda-developers.com/showthread.php?t=2502714 then update your philz recovery to newer. have a nice day.
Click to expand...
Click to collapse
I'm gonna try this, thanks for the fast answer!
+1 :good:
Ok, tried it but did not work, still getting a whole bunch of errors with getprop I9505G etc..
tareqnull said:
Ok, tried it but did not work, still getting a whole bunch of errors with getprop I9505G etc..
Click to expand...
Click to collapse
Can you give us any information on the phone? such as custom rom, root, bootloader,recovery and such? thanks.
Repulsa said:
Can you give us any information on the phone? such as custom rom, root, bootloader,recovery and such? thanks.
Click to expand...
Click to collapse
Yeah sure, just installed stock firmware 4.3 so nothing editted, PhilZ CWM recovery and that's it.
Since the kernel it won't install cm10.2 anymore so yeh...
Nothing much to explain, I don't know why this happens to me, my model number jftlexx is correct but in recovery it gives a bunch of errors with i9505G and the model name of it, forgot it I think it was like jgdlet or something.
tareqnull said:
Yeah sure, just installed stock firmware 4.3 so nothing editted, PhilZ CWM recovery and that's it.
Since the kernel it won't install cm10.2 anymore so yeh...
Nothing much to explain, I don't know why this happens to me, my model number jftlexx is correct but in recovery it gives a bunch of errors with i9505G and the model name of it, forgot it I think it was like jgdlet or something.
Click to expand...
Click to collapse
i found this after reading cm10 that you need to install a compaltible recovery for this "Make sure you have the LATEST version of ClockworkMod recovery. Other recoveries may work but will not be supported by CyanogenMod" either you use a Clockwork recovery http://forum.xda-developers.com/showthread.php?t=2397108 or you can try it with TWRP http://forum.xda-developers.com/showthread.php?t=2468187 and make sure the file you download is not corrupt, please check the Hashcheck that u got the proper file.
Repulsa said:
i found this after reading cm10 that you need to install a compaltible recovery for this "Make sure you have the LATEST version of ClockworkMod recovery. Other recoveries may work but will not be supported by CyanogenMod" either you use a Clockwork recovery http://forum.xda-developers.com/showthread.php?t=2397108 or you can try it with TWRP http://forum.xda-developers.com/showthread.php?t=2468187 and make sure the file you download is not corrupt, please check the Hashcheck that u got the proper file.
Click to expand...
Click to collapse
Fixed it, just used another recovery, TWRP .
Thanks dude for the extra info.
tareqnull said:
Fixed it, just used another recovery, TWRP .
Thanks dude for the extra info.
Click to expand...
Click to collapse
Im glad that helps have a nice day sir.
Hello to all!
This's my first theat at XDA.
I've just ported CWM, TWRP ,PhilZ recoveries from Note 3 Neo, because it's using same hardware exynos5260 and I think there is no need for now to be builded specially for this device.
All recoveries working without issues.
Possibly to work with other models C111, C116 etc.
CWM 6.0.5.1
PhilZ Recovery 6.56.2(CWM 6.0.5.1)
TWRP 2.8.0.0
TWRP 2.8.3.0 - new 12/23/2014
Quick flashing guide!!!
- Install Samsung drivers - download
- Download ODIN flasher 3.09 - download
- Dowload your desired recovery
- Load recovery tar on PDA section
- Then flash from START button
- That's it!!!
If you find any bugs, please report.
gaddmann said:
Hello to all!
This's my first theat at XDA.
I've just ported CWM, TWRP ,PhilZ recoveries from Note 3 Neo, because it's using same hardware exynos5260 and I think there is no need for now to be builded specially for this device.
All recoveries working without issues.
Possibly to work with other models C111, C116 etc.
CWM 6.0.5.1
TWRP 2.8.0.0
PhilZ Recovery 6.56.2(CWM 6.0.5.1)
Quick flashing guide!!!
- Install Samsung drivers - download
- Download ODIN flasher 3.09 - download
- Dowload your desired recovery
- Load recovery tar on PDA section
- Then flash from START button
- That's it!!!
If you find any bugs, please report.
Click to expand...
Click to collapse
There's other methods of Flashing it.
This Also rises the question, Note 3 Neo ROMs working on the Galaxy Camera.
Sent from my LG-P920 using XDA Free mobile app
Ouya-XD said:
There's other methods of Flashing it.
This Also rises the question, Note 3 Neo ROMs working on the Galaxy Camera.
Sent from my LG-P920 using XDA Free mobile app
Click to expand...
Click to collapse
Yes you're right there's other easily methods.
I think Note 3 Neo ROMs will work but needed to be ported.
Hey ,
I tried n installed philz recovery latest on my galaxy core duos - I8262.
But it gets stuck on boot loop or recovery loop.
I really need to install a custom rom .so please help me.i did xactly like d tutorial.
darklor said:
Hey ,
I tried n installed philz recovery latest on my galaxy core duos - I8262.
But it gets stuck on boot loop or recovery loop.
I really need to install a custom rom .so please help me.i did xactly like d tutorial.
Click to expand...
Click to collapse
You're in the wrong device section as well, it's built for the Zoom, & Galaxy Camera 1, & 2.
The code couldn't properly transfer to the Galaxy Core Duos unless you forced it through Odin.
If you did that, and you obtained the files from here then you're stranded in your own boat.
You need to Unbrick via your devices section, & install CWM/TWRP.
Sent from my LG-P920 using XDA Free mobile app
Thank you
Good Work
Awesome thanks !!!
Each one working without problem
I does not work on my K Zoom. Root was no problem.
I tried to flash via Odin und from SD Card. I tried Philz and TWRP 2.8.3.0
After flashing the phone reboots normal.
I tried to flash the stock recovery. But this also does not work. I can not boot in recovery.
I need Help!
It does not work
After uploading TWRP or Philz Recovery - remains stocks recovery (3e)
KOT49H.C115XXU1BNF1
!!! Now it's ok, I had to first upload "Tim_KZoom_KatAutoRootV3.tar.md5" and the second "PhilZ-Recovery-Samsung-Galaxy-K-Zoom".
Greetings to all. Chris
Hello,
First of all, thanks for all the jobs done within this communauty.
I have a new Samsung K Zoom with build KOT49H.C115XXU1BNF1, and I would like to root it due to a limitation that non build in apps cannot write on the SD card (was not the case with my previous S2)
After googling, I found your post that looks like it will answer my needs to root the device.
However, I don't understand what are the goals of all the recovery files listed? Should I use all of them one after the other to simply root the device?
Many thanks in advanced for your help
zyrocco said:
Hello,
First of all, thanks for all the jobs done within this communauty.
I have a new Samsung K Zoom with build KOT49H.C115XXU1BNF1, and I would like to root it due to a limitation that non build in apps cannot write on the SD card (was not the case with my previous S2)
After googling, I found your post that looks like it will answer my needs to root the device.
However, I don't understand what are the goals of all the recovery files listed? Should I use all of them one after the other to simply root the device?
Many thanks in advanced for your help
Click to expand...
Click to collapse
Hi,
Just root your K zoom with thread from xda.
Then just flash recovery from my thread doesn't matter which you will flash.
Actually everyone has the different taste some likes TWRP some CWM and for thus I was posted 3 recoveries but I suggest you to use TWRP because it's more touch friendly than CWM.
Thanks for your quick answer.
This gives me confidence but before I proceed, I'm going to act as a newbie... with basic questions: what is the purpose of the recovery? Why should it be flashed? Is it part of the rooting process?
I feel sorry to ask all of these, got the feeling these are obvious questions. ..
Thanks in advance !
Newer versions?
Is there anyone who can port newer versions of the mentioned recoveries?
Hey Thank you for the 2.8.3.0 TWRP
last time i was here , i had trouble with the earlier versions restoring my bk-ups so stayed on cwm of timduru`s.
BUT just flashed the TWRP 2.8.30 and SU too and its all ok now , seems to also always to go into recovery now rather than the bug where repeated steps in tims bugged cwm steps . Thank you happy days ..
Ps, this last one ... could do with going in the dedicated kzoom forum that last one
gaddmann said:
Yes you're right there's other easily methods.
I think Note 3 Neo ROMs will work but needed to be ported.
Click to expand...
Click to collapse
Can you tell me how i start to port the Cyanogen Mod 13 (Or 12.1) to my Galaxy K Zoom SM-C115M ? i will try my best.
The files are to small to get Android 6.0.5.1 . The original File for K-zoom is 1.8 GB. How can I get the complete Version?
Salsero71 said:
The files are to small to get Android 6.0.5.1 . The original File for K-zoom is 1.8 GB. How can I get the complete Version?
Click to expand...
Click to collapse
What do do you mean?
I will install an 6.0.5.1 on my k-zoom, but the Files was online 9 MB Big. After I Run the Files nothing changed on my Phone. Where can I get an complete File to root with odin ?
Salsero71 said:
I will install an 6.0.5.1 on my k-zoom, but the Files was online 9 MB Big. After I Run the Files nothing changed on my Phone. Where can I get an complete File to root with odin ?
Click to expand...
Click to collapse
In order to root with odin this should work:
https://www.dropbox.com/s/7vj6c9o4a4mg2z7/CF-Auto-Root-m2alte-m2altexx-smc115.tar?dl=0
Flashing Samsung Galaxy Note 3 Neo ROM into Galaxy K Zoom
Did anyone try to flash Samsung Galaxy Note 3 Neo ROM into Galaxy K Zoom without port the ROM? I have no idea of how to do that so I willing to try flashing the SM-N7505 into my Galaxy K Zoom.
im trying to find a twrp recovery for galaxy tab 4 8.0 sm-t330nu
can someone help me out?
i know theres one for the SM-T5XX but im not sure if it will work on mine if someone knows please let me know.
mrdreamers said:
im trying to find a twrp recovery for galaxy tab 4 8.0 sm-t330nu
can someone help me out?
i know theres one for the SM-T5XX but im not sure if it will work on mine if someone knows please let me know.
Click to expand...
Click to collapse
TWRP for Tab 4 8.0 (may or may not be working)
CWM for Tab 4 8.0 (almost definitely working)
Don't try installing the TWRP for SM-T5XX, if it even will let you do so. Bad things will happen. There have even been issues where people with the 10.1 have a malfunctioning recovery because they installed the build for the wrong model, point being it will probably wreak even more havoc on your 8.0. Good luck:good:
thisisapoorusernamechoice said:
TWRP for Tab 4 8.0 (may or may not be working)
CWM for Tab 4 8.0 (almost definitely working)
Don't try installing the TWRP for SM-T5XX, if it even will let you do so. Bad things will happen. There have even been issues where people with the 10.1 have a malfunctioning recovery because they installed the build for the wrong model, point being it will probably wreak even more havoc on your 8.0. Good luck:good:
Click to expand...
Click to collapse
TY, i think ill do philz recovery but tell me is this the one i want to flash cuz theres a few on the list?
sm-t331-Philz-6_58_9-recovery-FINAL.zip
and also can i flash this in stock recovery or should i use an app like flash gordan?
mrdreamers said:
TY, i think ill do philz recovery but tell me is this the one i want to flash cuz theres a few on the list?
sm-t331-Philz-6_58_9-recovery-FINAL.zip
and also can i flash this in stock recovery or should i use an app like flash gordan?
Click to expand...
Click to collapse
I'm pretty sure this
https://www.androidfilehost.com/?fid=95887005526787722
Is the one you want, the t331 is a different machine. You did say sm-t330nu? The zip files are for flashing from an existing custom recovery. Flash the one I linked through Odin. Instructions are in the first post of the philz thread.
Exile1975 said:
I'm pretty sure this
https://www.androidfilehost.com/?fid=95887005526787722
Is the one you want, the t331 is a different machine. You did say sm-t330nu? The zip files are for flashing from an existing custom recovery. Flash the one I linked through Odin. Instructions are in the first post of the philz thread.
Click to expand...
Click to collapse
ty for that!
i was also wondering if you knew whrere i can find some custom roms for my galaxy tab 4 8" sm-t330nu?
There was a debloated stock ROM but it had some problems and the Dev removed it. Your better off using titanium backup once you root to freeze the apps you don't want.
Exile1975 said:
There was a debloated stock ROM but it had some problems and the Dev removed it. Your better off using titanium backup once you root to freeze the apps you don't want.
Click to expand...
Click to collapse
ty , but i can delete those apps with rom toolbox or and uninstaller app, yes i have not seen a rom for my device but i think im going to try to make one myself with kitchen i made one for my s4 so ill give it a try for the tab.
But if you here about a rom for my device let me know ty
//deleted
Too many risks, im sorry.
A mod should please delete this thread.
begin123 said:
Hey mates,
i get working TWRP on my S6 Edge (G925F)
Follow these steps:
1. Root your device via CF-Autoroot. (Knox will be triggered)
-> http://forum.xda-developers.com/galaxy-s6-edge/orig-development/cf-auto-root-t3056631
2. Download the TWRP image
-> https://blck.io/twrp-2.8.6.0-zeroltetmo.img
3. Download Flashify on your device.
-> Playstore
4. Flash the image via Flashify, reboot and enjoy.
5. Lets wait for custom Roms. <3
Just tested it with the G925F
Do it on your own risk.
I didnt find a thread about that, so i created one.
Sorry for my bad english, im from germany
Greets.
Click to expand...
Click to collapse
First wrong section and second you cant restore roms with that recovery.
WARNING!
Third)
Many of us (me included) lost the audio during a phone call by using that version of TWRP.
I say let's wait for official TWRP recovery.
Cr4z33 said:
Third)
Many of us (me included) lost the audio during a phone call by using that version of TWRP.
I say let's wait for official TWRP recovery.
Click to expand...
Click to collapse
lets hope its soon standard s6 has had it for a while now and from early reports s6 edge has been selling just as good as standard s6 so lets hope we get some roms to quite disappointed at the moment thought we would of had official twrp by now and at least a couple roms to
Cr4z33 said:
Third)
Many of us (me included) lost the audio during a phone call by using that version of TWRP.
I say let's wait for official TWRP recovery.
Click to expand...
Click to collapse
same here last week,, have to reflash firmware
Thread Closed per OP request and for the fact that people have problems.