I had my device rooted on an older version of android (4.4 I believe). I removed root and was able to update OTA to 5.0 lolipop. Now I cant seem to root it at all. I've tried Kingo and Odin. Here is the log from Odin after it failed.
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> recovery.img
<ID:0/008> NAND Write Start!!
<ID:0/008> FAIL! (Auth)
<ID:0/008>
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone side:
ODIN MODE
Product name: SM-N900A
Current Binary: Samsung official
Knox Warranty Void: 0X0
Qualcom Secure Boot: Enable (CSB)
RP SWREV: S2, T2, R2, A3, P2
SECURE DOWNLOAD: ENABLE
UDC START
SYS REV CHECK FAIL : No Version
Secure Magiccode Check Fail : Recovery
Any help is needed, Thank you.
In KK nand write start error could be reactivation lock is enabled. But in L that menu nowhere to be found. Maybe I missed it somewhere.
Sorry just noticed it's not mentioned on you download mode description. I guess it's different with at&t version.
Sent from my SM-N920C
I was told to look for reactivation lock, but I can't find it either.
Sent from my SAMSUNG-SM-N900A using XDA-Developers mobile app
AT&T forum ???
http://forum.xda-developers.com/showthread.php?t=2574886
I'm not concerned with my phone being fake. I bought it through AT&T brand new over 2 years ago.
Sent from my SAMSUNG-SM-N900A using XDA-Developers mobile app
I think he means that you should ask in at&t forum.
Sent from my SM-N920C
OK thanks, I'll try there.
Sent from my SAMSUNG-SM-N900A using XDA-Developers mobile app
Related
I have an official korean Galaxy s5 with Android 5.0 with baseband version g900sksu1boa1, kernel 3.4.0-3866468, build number: lrx2it.g900sksu1boa1. I have been trying to root this phone for days using all available tutorials but all of them have failed. After shutting down the phone, and then pressing the Volume Down-Home-Power keys I get to a screen with Korean script on the page. If I press Volume Down, the phone boots to the normal screen. If I push Volume-UP, I get the Android character, and in the top left of the screen I get the following lines:
Odin Mode
Product Name: SM-G900S
Current Binary: Samsung Official
System Status: Official
Reactivation Lock(KK): On
Knox Warranty Void: 0x0
Qualcom Secureboot: Enable (CSB)
RP SWREV: S1, T1, R1, A1, P1
Secure Download: Enable
UDC Start
Then when I connect with Odin I get the following log entry:
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> FAIL! (Auth)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Then the "Failed"notification appears in Odin. Have I missed something here or does the build I have not have a rooting method yet?
Hi everybody,
I'm trying to install a new firmware to my Galaxy S5 but it fails.
I tried with all the following options but it doesn't work:
-From the phone side, I enabled "usb debugging" and I set
-From the pc side, I tried with the usb driver v 1.5.15.0 and v 1.5.51.0
-Odin: v 3.04, v 3.06, v 3.07, v 3.09
-I tried with my two usb ports 3.0 and 2.0At the first test, I get this message in Odin:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> FAIL!
<ID:0/007>
<ID:0/007> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)At my second test, I get a different message:
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At the phone screen, I get this:
ODIN MODE
PRODUCT NAME: SM-G900AZ
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
KNOX WARRANTY VOID: 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
UDC START
SECURE CHECK FAIL : PIT
Here, I noticed a strange thing: the product name is SM-G900AZ. However, when I go to info about device on the phone I have the following model number: SM-G900F (Baseband version: G900FZHU1ANI2, build number: ORG.G900FZHU1ANI2). Is this normal? which model number is the right one?
How can I fix that? please help
Thanks
So you have a cricket s5? What firmware is on your phone right now? Go to settings> about device to check.
What firmware are you trying to flash?
Is the phone rooted? Custom recovery installed?
Sent from my SM-G900F using Tapatalk
Swimguy14 said:
So you have a cricket s5? What firmware is on your phone right now? Go to settings> about device to check.
What firmware are you trying to flash?
Is the phone rooted? Custom recovery installed?
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
I'm not sure if it is cricket s5, I bought it in France!
The current firmware is G900FZHU1ANI2 and I'm trying to install G900FXXU1BOD3.
The phone is not rooted and I didn't install Custom recovery.
You have incorrect pit file for partition mapping
---------- Post added at 01:01 PM ---------- Previous post was at 12:58 PM ----------
You must find the correct pit file for your device end os if you want to format partition if not flash only firmware
Hey ya'll, this past Saturday my Note 4 started a boot loop while using Baconreader. I was using stock ROM, unrooted, T-Mobile. I first deleted the cache partition, then did a factory reset, but neither worked.
I tried flashing with Odin v3.09, using ROMS from SamMobile:
4.4.4 ANK4
5.0.1 COD6
5.0.1 COG2
Each time I would get
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the phone in download mode was:
Odin Mode (High Speed)
Product Name: SM-N910T
Current Binary: Samsung Official
System Status: Official
Reactivation Lock: Off
Knox Warranty Void: 0x0
Qualcomm Secureboot: Enable (CSB)
AP Swerv: S1, T1, R1, A2, P1
Secure Download: Enable
UDC Start
SW Rev Check Fail : [aboot]Fused 2 > Binary 1
[1]eMMC write fail: ABOOT
I then used the latest ROM from SamMobile, 6.0.1 EPE3, and everything worked. Odin flashed it and the installation was good. But as soon as it finished and booted for the first time the boot loop started again. I tried using KIES to do a emergency firmware restore but it would not pick up my Note 4 (Using a Samsung USB Cord) I tried it with and without Samsung USB Drivers installed. I'm starting to think it may be a hardware problem, honestly though I have no idea. I would like to get some other opinions before I send off for a new one. (No warranty over a year old) Thanks in advance, and sorry if the formatting is long, I figured it would be easier to read if everything was spaced out. Thanks in advance.
Hey guys please help me.
Long story short first: my stepsister wanted to get a new phone and gift this one to my stepdad. She apparently just factory resetted it with her google account on it but now when you start it up the FRP message pops up and the login doesn't work properly. This is the first time I even heard about FRP because I'm using a pretty old phone. I want to help because I'd consider myself good at computers and rooted my ex-smartphone years ago. Now I simply tried using this tutorial how to bypass it:
https://forum.xda-developers.com/general/general/bypass-frp-samsung-galaxy-s7-edge-t3765638
But that didn't work out because the ROM wasn't the right one for this device.
I spent the night downloading a previous stock ROM for it from a random website which took 12 hours
It was named DBT-G935FXXS1DQL1. Like I said stock ROM, I don't know if that's the right way. I wanted to downgrade it so I could use the bypass method from the tutorial.
But... That didn't work out either, Odin failed at this stage:
<ID:0/005> Odin engine v(ID:3.1203)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sboot.bin
<ID:0/005> param.bin
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
And on the smartphone this error message appeared in the download mode:
"SW REV. CHECK FAIL. DEVICE: 2, BINARY: 1"
Here are the informations I have from the recovery mode:
samsung/hero2ltexx/&hero2lte
7.0/NRD90M/G935FXXS2DRDI
user/release-keys
And this is standing in the download mode:
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G935F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FRP LOCK: ON
Secure Download: Enabled
WARRANTY VOID: 0 (0x0000)
RP SWREV: B:2 K:0 S:0
Please help me, I really have no clue about this flashing older firmwares and such.
Thank you in advance, Philipp
Hello, have you managed to solve this?
I have also similar problem
Samsung/hero21texx/hero2lte
8.0.0/R16NW/G935FXXU2EREM
No, I'm waiting for somebody who knows more.
e4zyphil said:
No, I'm waiting for somebody who knows more.
Click to expand...
Click to collapse
Me too, do you think this may work?
https://www.youtube.com/watch?v=KVYQyvJ7IVY
Balkrish999 said:
Me too, do you think this may work?
/watch?v=KVYQyvJ7IVY
Click to expand...
Click to collapse
this worked for me, thanks :good::good:
Hi there,
The Samsung S7 Edge of a friend got stuck @boot. I have tried to reset and wipe. But that does not solve the problem.
So now i am trying to put on the latest official firmware from Samfw, Smammobile and/or Frija but Odin 3.14 fails.
I think the phone got stuck in an OTA update.
Please help
Here are more details.
S7 Edge SM-G935FD in the Netherlands (PHN), the G935F version should be working as well, its an exynos chipset with dual sim.
In download mode it says on top left:
Product Name: SM-G935F
Current Binary: Samsung Official
System Status: Official
FRP Lock is ON (i cannot go to devevlopper mode to change that)
Secure Donwload: Enabled
Warranty Void: 0
AP: SWREV: B:8 K:6 S:7
I followed all kind of guides on XDA
Get the right Odin 3.14
Get the right Firmware. Samfw.com_SM-G935F_PHN_G935FXXU8ETI2
Using Default Odin Settings
I have a connection to the phone.
This is the ODIN log:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4045 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Dekay99 said:
Hi there,
The Samsung S7 Edge of a friend got stuck @boot. I have tried to reset and wipe. But that does not solve the problem.
So now i am trying to put on the latest official firmware from Samfw, Smammobile and/or Frija but Odin 3.14 fails.
I think the phone got stuck in an OTA update.
Please help
Here are more details.
S7 Edge SM-G935FD in the Netherlands (PHN), the G935F version should be working as well, its an exynos chipset with dual sim.
In download mode it says on top left:
Product Name: SM-G935F
Current Binary: Samsung Official
System Status: Official
FRP Lock is ON (i cannot go to devevlopper mode to change that)
Secure Donwload: Enabled
Warranty Void: 0
AP: SWREV: B:8 K:6 S:7
I followed all kind of guides on XDA
Get the right Odin 3.14
Get the right Firmware. Samfw.com_SM-G935F_PHN_G935FXXU8ETI2
Using Default Odin Settings
I have a connection to the phone.
This is the ODIN log:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 4045 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
OH just found this great article
[GUIDE] AN ESSENTIAL GUIDE FOR G935F/FD
AN ESSENTIAL GUIDE FOR G935F/FD DISCLAIMER ☆THIS WILL BE A HUGE WORD WALL, SO DON'T BOTHER WITH THIS IN ADVANCE IF YOU MIND READING LARGE AMOUNTS OF WORDS ON SCREEN :D ☆THIS ISN'T A ROOT GUIDE EXACTLY BUT WHEN YOU READ THIS TILL THE END...
forum.xda-developers.com
Did i read it well, and understand that FRP Lock is ON.. that prevents me to install anyting?
"But if you haven't rooted/enabled OEM Unlock before, this won't work either and you may had to take your phone to a repair shop "